cxl/port: Add RCD endpoint port enumeration

Unlike a CXL memory expander in a VH topology that has at least one
intervening 'struct cxl_port' instance between itself and the CXL root
device, an RCD attaches one-level higher. For example:

               VH
          ┌──────────┐
          │ ACPI0017 │
          │  root0   │
          └─────┬────┘
                │
          ┌─────┴────┐
          │  dport0  │
    ┌─────┤ ACPI0016 ├─────┐
    │     │  port1   │     │
    │     └────┬─────┘     │
    │          │           │
 ┌──┴───┐   ┌──┴───┐   ┌───┴──┐
 │dport0│   │dport1│   │dport2│
 │ RP0  │   │ RP1  │   │ RP2  │
 └──────┘   └──┬───┘   └──────┘
               │
           ┌───┴─────┐
           │endpoint0│
           │  port2  │
           └─────────┘

...vs:

              RCH
          ┌──────────┐
          │ ACPI0017 │
          │  root0   │
          └────┬─────┘
               │
           ┌───┴────┐
           │ dport0 │
           │ACPI0016│
           └───┬────┘
               │
          ┌────┴─────┐
          │endpoint0 │
          │  port1   │
          └──────────┘

So arrange for endpoint port in the RCH/RCD case to appear directly
connected to the host-bridge in its singular role as a dport. Compare
that to the VH case where the host-bridge serves a dual role as a
'cxl_dport' for the CXL root device *and* a 'cxl_port' upstream port for
the Root Ports in the Root Complex that are modeled as 'cxl_dport'
instances in the CXL topology.

Another deviation from the VH case is that RCDs may need to look up
their component registers from the Root Complex Register Block (RCRB).
That platform firmware specified RCRB area is cached by the cxl_acpi
driver and conveyed via the host-bridge dport to the cxl_mem driver to
perform the cxl_rcrb_to_component() lookup for the endpoint port
(See 9.11.8 CXL Devices Attached to an RCH for the lookup of the
upstream port component registers).

Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993045621.1882361.1730100141527044744.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Camerom <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

1 files changed, 25 insertions, 8 deletions

diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
index aa63ce8c7ca6..39c4b54f0715 100644
--- a/drivers/cxl/mem.c
+++ b/drivers/cxl/mem.c
@@ -45,12 +45,13 @@ static int cxl_mem_dpa_show(struct seq_file *file, void *data)
 	return 0;
 }
 
-static int devm_cxl_add_endpoint(struct cxl_memdev *cxlmd,
+static int devm_cxl_add_endpoint(struct device *host, struct cxl_memdev *cxlmd,
 				 struct cxl_dport *parent_dport)
 {
 	struct cxl_port *parent_port = parent_dport->port;
 	struct cxl_dev_state *cxlds = cxlmd->cxlds;
 	struct cxl_port *endpoint, *iter, *down;
+	resource_size_t component_reg_phys;
 	int rc;
 
 	/*
@@ -65,8 +66,18 @@ static int devm_cxl_add_endpoint(struct cxl_memdev *cxlmd,
 		ep->next = down;
 	}
 
-	endpoint = devm_cxl_add_port(&parent_port->dev, &cxlmd->dev,
-				     cxlds->component_reg_phys, parent_dport);
+	/*
+	 * The component registers for an RCD might come from the
+	 * host-bridge RCRB if they are not already mapped via the
+	 * typical register locator mechanism.
+	 */
+	if (parent_dport->rch && cxlds->component_reg_phys == CXL_RESOURCE_NONE)
+		component_reg_phys = cxl_rcrb_to_component(
+			&cxlmd->dev, parent_dport->rcrb, CXL_RCRB_UPSTREAM);
+	else
+		component_reg_phys = cxlds->component_reg_phys;
+	endpoint = devm_cxl_add_port(host, &cxlmd->dev, component_reg_phys,
+				     parent_dport);
 	if (IS_ERR(endpoint))
 		return PTR_ERR(endpoint);
 
@@ -87,6 +98,7 @@ static int cxl_mem_probe(struct device *dev)
 {
 	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
 	struct cxl_dev_state *cxlds = cxlmd->cxlds;
+	struct device *endpoint_parent;
 	struct cxl_port *parent_port;
 	struct cxl_dport *dport;
 	struct dentry *dentry;
@@ -119,17 +131,22 @@ static int cxl_mem_probe(struct device *dev)
 		return -ENXIO;
 	}
 
-	device_lock(&parent_port->dev);
-	if (!parent_port->dev.driver) {
+	if (dport->rch)
+		endpoint_parent = parent_port->uport;
+	else
+		endpoint_parent = &parent_port->dev;
+
+	device_lock(endpoint_parent);
+	if (!endpoint_parent->driver) {
 		dev_err(dev, "CXL port topology %s not enabled\n",
-			dev_name(&parent_port->dev));
+			dev_name(endpoint_parent));
 		rc = -ENXIO;
 		goto unlock;
 	}
 
-	rc = devm_cxl_add_endpoint(cxlmd, dport);
+	rc = devm_cxl_add_endpoint(endpoint_parent, cxlmd, dport);
 unlock:
-	device_unlock(&parent_port->dev);
+	device_unlock(endpoint_parent);
 	put_device(&parent_port->dev);
 	if (rc)
 		return rc;