Merge tag 'iio-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing

Jonathan writes:

IIO: 1st set of new device support, features and cleanup for 6.12

Includes a merge of spi-mos-config branch from spi.git that brings
support needed for the AD4000 driver.

Lots of new device support this time including 9 new drivers and substantial
changes to add new support to several more.

New device support
------------------

Given we have a lot of new support, I've subcategorized them:

Substantial changes, or new driver
**********************************

adi,ad4000
- New driver for this high speed ADC.
adi,ad4695
- New driver supporting AD4690, AD4696, AD4697 and AD4698 ADCs.
- Follow up series added triggered buffer support.
adi,ad7380
- Add support for single ended parts, AD7386, ADC7387, AD7388 and -4 variants.
  (driver previously only support differential parts).
  These variants have an additional front end MUX so only half the channels
  can be sampled efficiently.
adi,ad9467
- Refactor and extend driver to support ad9643, ad9449 and ad9652 high speed
  ADCs.
adi,adxl380
- New driver for this low power accelerometer.
adi,ltc2664
- New driver supporting LTC2664 and LTC2672 DACs.
microchip,pac1921
- New driver for this power/current monitor chip.
rohm,bh1745
- New driver for this RGBC colour sensor.
rohm,bu27034anuc
- The original bu27034 was canceled before mass production, so the
  driver is modified to support the BU27034ANUC which had some significant
  differences.  DT compatible changed to avoid chance of old driver ever
  binding to real hardware.
sciosense,ens210
- New driver for ens210, ens210a, ens211, ens212, ens213a, and ens215
  temperature and humidity sensors (all register compatible up to some
  conversion time differences)
sensiron,sdp500
- New driver for this differential pressure sensor.
tyhx,hx9023s
- New driver to support this capacitive proximity sensor.

Minor changes to support new devices
************************************

adi,adf4377
- Add support for the single output adf4378.
kionix,kxcjk-1013
- Add support for KX022-1020 accelerometer (binding and ID table only)
liteon,ltrf216a
- Add support for ltr-308.  A few minor differences in features set
rockchip,saradc
- Add ID for rk3576-saradc
sensortek,stk3310
- Add ID for stk3013 proximity sensor which (despite documentation) has
  an ambient light sensor and is compatible with existing parts.

Documentation updates
---------------------

Generalize ABI docs for shunt resistor attribute
Improve calibscale and calibbias related documentation.  A couple of follow
up patches to resolve duplicate documentation that resulted.

New core features
-----------------

backend
- Add option for debugfs - useful for test pattern control
- Use this for both adi-axi-adc and adi-axi-dac
trigger suspend
- Add functions to allow triggers to be suspended. This avoids problems
  when a device enters suspend to idle with a sysfs trigger. Use it for now
  in the bmi323 only.

New driver features
-------------------

adi,ad7192
- Add option to be a clock provider (+ additional clock config options)
adi,ad7380
- Add documentation for this fairly new driver.
adi,ad9461
- Provide control of test modes and backend validation blocks used
  to identify problems (via debugfs)
adi,ad9739
- Add backend debugfs and docs for what is provided via adi-axi-dac
avago,apds9960
- Add proximity and gesture calibration offset control
bosch,bmp280
- Triggered buffer support including adding raw+scale output for sysfs.
liteon,ltr390
- Add configuration of integration time and scale.
stm,dfsdm
- Convert this SD modulator driver to backend framework and add support
  for channel scaling + modern channel bindings.

Treewide cleanup
----------------

iio_dev->masklength: Making it private.
- Provide access function to read the core compute channel mask length
  and a macro to iterate over elements in the active_scan_mask.
- Enables marking masklength __private preventing drivers from
  writing it without triggering a build warning whilst minimizing overhead
  in what are typically hot paths.
- Convert all drivers and finally mark it private.
  Merge conflicts resolved in drivers applied after this point.
Constify regmap_bus
- These are never modified, so mark them const.

Core cleanup
------------

backend
- A few late breaking bits of feedback (unused variable, error messages)
dma-buffer
- Namespace exports.
core
- Drop unused assignment.

Driver cleanup
--------------

adi,ad4695
- Fixing binding to reflect that common-mode-channel is a scalar.
adi,ad7280a
- Use __free(kfree) to simplify freeing of receive buffer.
adi,ad7606
- Various dt-binding cleanup and improvements.
- Fix oversampling related gpio handling.
- Make polarity of standby gpio match documentation.
- use guard() to simplify lock handling.
adi,ad7768
- Use device_for_each_child_node_scoped() instead of fwnode equivalent.
adi,ad7124
- Reduce SPI transfers by avoiding separate writes to different fields
  in the same register.
- Start the ADC in idle mode.
adi,adis
- Drop ifdefs in favor of IS_ENABLED.
adi,admv8818
- Fix wrong ABI docs.
asahi-kasei,ak8975
- Drop a prefix free compatible accidentally added recently.
aspeed,adc
- Use of_property_present() instead of of_find_property() to see if the
  property is there or not.
atmel,at91,
- Use __free(kfree) to simplify freeing of channel related array.
bosch,bma400
- Use __free(kfree) to simplify freeing a locally allocated string.
bosch,bmc150
- Add missing mount-matrix binding docs.
bosch,bme680
- Fix read/write to ensure multiple necessary sequential reads without
  device configuration change.
- Drop unnecessary type casts and use more appropriate data types.
- Drop some left over ACPI code as ACPI support was removed due to invalid
  IDs (and no known users).
- Sort headers consistently.
- Avoid unnecessary duplicate read and redundant read of gas config.
- Use bulk reads to get calibration data.
- Reorder allocation of IIO device to be prior to device init.
- Add remaining read/write buffers to the union used already for all others.
- Tidy up error checks for consistency of style, including dev_err_probe()
- Bring the device startup procedure inline with the vendor code.
- Reorder code so mode forcing is more obvious occurring where needed.
- Tidy up data locality in reading functions so no magic data is stored
  in state structures just to get it across function calls.
- Make a local lookup table static to avoid placing it on the stack.
bosch,bmp280
- Fix BME280 regmap to not include registers it doesn't have.
- Wait a little longer after config to allow for maximum possible necessary
  wait.
- Reorganize headers.
- Make conversion_time_max array static to avoid placing it on the stack.
maxim,max1363
- Use __free(kfree) to simplify freeing transmission buffer.
microchip,mcp3964
- Use devm_regulator_get_enable_read_voltage()
microchip,mcp3911
- Use devm_regulator_get_enable_read_voltage()
microchip,mcp4728
- Use devm_regulator_get_enable_read_voltage()
microchip,mcp4922
- Use devm_regulator_get_enable_read_voltage() and devm_* to allow
  dropping of explicit remove() callback.
onnn,noa1305
- Various tidy up.
- Provide available scale values.
- Make integration time configurable.
- Fix up integration time look up (/2 error)
ti,dac7311
- Check if spi_setup() succeeded.
ti,tsc2046
- Use __free(kfree) to simplify freeing rx and tx buffers.
- Use devm_regulator_get_enable_read_voltage()

Various minor fixes not called out explicitly.

* tag 'iio-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (250 commits)
  drivers:iio:Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
  iio: sgp40: retain documentation in driver
  iio: ABI: remove duplicate in_resistance_calibbias
  dt-bindings: iio: st,stm32-adc: add top-level constraints
  iio: ABI: add missing calibbias attributes
  iio: ABI: add missing calibscale attributes
  iio: ABI: sort calibscale attributes
  iio: ABI: document calibscale_available attributes
  iio: light: ltr390: Calculate 'counts_per_uvi' dynamically
  iio: light: ltr390: Add ALS channel and support for gain and resolution
  doc: iio: ad4695: document buffered read
  iio: adc: ad4695: implement triggered buffer
  iio: proximity: hx9023s: Fix error code in hx9023s_property_get()
  iio: light: noa1305: Fix up integration time look up
  iio: humidity: Add support for ENS210
  dt-bindings: iio: humidity: add ENS210 sensor family
  iio: imu: adis16460: drop ifdef around CONFIG_DEBUG_FS
  iio: imu: adis16400: drop ifdef around CONFIG_DEBUG_FS
  iio: imu: adis16480: drop ifdef around CONFIG_DEBUG_FS
  iio: imu: adis16475: drop ifdef around CONFIG_DEBUG_FS
  ...

9 files changed, 181 insertions, 85 deletions

diff --git a/Documentation/ABI/testing/debugfs-iio-ad9467 b/Documentation/ABI/testing/debugfs-iio-ad9467
new file mode 100644
index 000000000000..0352fca1f7f2
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-iio-ad9467
@@ -0,0 +1,39 @@
+What:		/sys/kernel/debug/iio/iio:deviceX/calibration_table_dump
+KernelVersion:	6.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This dumps the calibration table that was filled during the
+		digital interface tuning process.
+
+What:		/sys/kernel/debug/iio/iio:deviceX/in_voltage_test_mode_available
+KernelVersion:	6.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		List all the available test tones:
+		- off
+		- midscale_short
+		- pos_fullscale
+		- neg_fullscale
+		- checkerboard
+		- prbs23
+		- prbs9
+		- one_zero_toggle
+		- user
+		- bit_toggle
+		- sync
+		- one_bit_high
+		- mixed_bit_frequency
+		- ramp
+
+		Note that depending on the actual device being used, some of the
+		above might not be available (and they won't be listed when
+		reading the file).
+
+What:		/sys/kernel/debug/iio/iio:deviceX/in_voltageY_test_mode
+KernelVersion:	6.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing to this file will initiate one of available test tone on
+		channel Y. Reading it, shows which test is running. In cases
+		where an IIO backend is available and supports the test tone,
+		additional information about the data correctness is given.
diff --git a/Documentation/ABI/testing/debugfs-iio-backend b/Documentation/ABI/testing/debugfs-iio-backend
new file mode 100644
index 000000000000..01ab94469432
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-iio-backend
@@ -0,0 +1,20 @@
+What:		/sys/kernel/debug/iio/iio:deviceX/backendY/name
+KernelVersion:	6.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Name of Backend Y connected to device X.
+
+What:		/sys/kernel/debug/iio/iio:deviceX/backendY/direct_reg_access
+KernelVersion:	6.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Directly access the registers of backend Y. Typical usage is:
+
+		Reading address 0x50
+		echo 0x50 > direct_reg_access
+		cat direct_reg_access
+
+		Writing address 0x50
+		echo 0x50 0x3 > direct_reg_access
+		//readback address 0x50
+		cat direct_reg_access
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 7cee78ad4108..345d58535dc9 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -523,13 +523,26 @@ Description:
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltageY_i_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltageY_q_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_capacitance_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_calibbias
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -541,6 +554,9 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_calibbias_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_calibbias_available
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_calibbias_available
 KernelVersion:  5.8
 Contact:        linux-iio@vger.kernel.org
 Description:
@@ -549,25 +565,34 @@ Description:
 		- a small discrete set of values like "0 2 4 6 8"
 		- a range specified as "[min step max]"
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_capacitance_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_both_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_ir_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_calibscale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -575,6 +600,19 @@ Description:
 		production inaccuracies).  If shared across all channels,
 		<type>_calibscale is used.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminanceY_calibscale_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_calibscale_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximityY_calibscale_available
+KernelVersion:	4.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Available values of calibscale. Maybe expressed as either of:
+
+		- a small discrete set of values like "1 8 16"
+		- a range specified as "[min step max]"
+
+		If shared across all channels, <type>_calibscale_available is used.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_activity_calibgender
 What:		/sys/bus/iio/devices/iio:deviceX/in_energy_calibgender
 What:		/sys/bus/iio/devices/iio:deviceX/in_distance_calibgender
@@ -708,6 +746,7 @@ Description:
 		2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor,
 		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
 		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
+		42kohm_to_gnd: connected to ground via a 42kOhm resistor,
 		90kohm_to_gnd: connected to ground via a 90kOhm resistor,
 		100kohm_to_gnd: connected to ground via an 100kOhm resistor,
 		125kohm_to_gnd: connected to ground via an 125kOhm resistor,
@@ -2289,3 +2328,11 @@ KernelVersion:	6.7
 Contact:	linux-iio@vger.kernel.org
 Description:
 		List of available timeout value for tap gesture confirmation.
+
+What:		/sys/.../iio:deviceX/in_shunt_resistor
+What:		/sys/.../iio:deviceX/in_current_shunt_resistor
+What:		/sys/.../iio:deviceX/in_power_shunt_resistor
+KernelVersion:	6.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The value of current sense resistor in Ohms.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 b/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
deleted file mode 100644
index 6d2d2b094941..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
+++ /dev/null
@@ -1,17 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_power_shunt_resistor
-Date:		March 2017
-KernelVersion:	4.12
-Contact:	linux-iio@vger.kernel.org
-Description: 	The value of the shunt resistor used to compute power drain on
-                common input voltage pin (RS+). In Ohms.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_current_shunt_resistor
-Date:		March 2017
-KernelVersion:	4.12
-Contact:	linux-iio@vger.kernel.org
-Description: 	The value of the shunt resistor used to compute current flowing
-                between RS+ and RS- voltage sense inputs. In Ohms.
-
-These attributes describe a single physical component, exposed as two distinct
-attributes as it is used to calculate two different values: power load and
-current flowing between RS+ and RS- inputs.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-chemical-sgp40 b/Documentation/ABI/testing/sysfs-bus-iio-chemical-sgp40
index 469a7c00fad4..a95547e874f1 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-chemical-sgp40
+++ b/Documentation/ABI/testing/sysfs-bus-iio-chemical-sgp40
@@ -15,17 +15,3 @@ Description:
 		Set the relative humidity. This value is sent to the sensor for
 		humidity compensation.
 		Default value: 50000 (50 % relative humidity)
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_calibbias
-Date:		August 2021
-KernelVersion:	5.15
-Contact:	Andreas Klinger <ak@it-klinger.de>
-Description:
-		Set the bias value for the resistance which is used for
-		calculation of in_concentration_input as follows:
-
-		x = (in_resistance_raw - in_resistance_calibbias) * 0.65
-
-		in_concentration_input = 500 / (1 + e^x)
-
-		Default value: 30000
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dac b/Documentation/ABI/testing/sysfs-bus-iio-dac
new file mode 100644
index 000000000000..810eaac5533c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-dac
@@ -0,0 +1,61 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_toggle_en
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Toggle enable. Write 1 to enable toggle or 0 to disable it. This
+		is useful when one wants to change the DAC output codes. For
+		autonomous toggling, the way it should be done is:
+
+		- disable toggle operation;
+		- change out_currentY_rawN, where N is the integer value of the symbol;
+		- enable toggle operation.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_rawN
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute has the same meaning as out_currentY_raw. It is
+		specific to toggle enabled channels and refers to the DAC output
+		code in INPUT_N (_rawN), where N is the integer value of the symbol.
+		The same scale and offset as in out_currentY_raw applies.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_symbol
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Performs a SW switch to a predefined output symbol. This attribute
+		is specific to toggle enabled channels and allows switching between
+		multiple predefined symbols. Each symbol corresponds to a different
+		output, denoted as out_currentY_rawN, where N is the integer value
+		of the symbol. Writing an integer value N will select out_currentY_rawN.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Toggle enable. Write 1 to enable toggle or 0 to disable it. This
+		is useful when one wants to change the DAC output codes. For
+		autonomous toggling, the way it should be done is:
+
+		- disable toggle operation;
+		- change out_voltageY_rawN, where N is the integer value of the symbol;
+		- enable toggle operation.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_rawN
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute has the same meaning as out_currentY_raw. It is
+		specific to toggle enabled channels and refers to the DAC output
+		code in INPUT_N (_rawN), where N is the integer value of the symbol.
+		The same scale and offset as in out_currentY_raw applies.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Performs a SW switch to a predefined output symbol. This attribute
+		is specific to toggle enabled channels and allows switching between
+		multiple predefined symbols. Each symbol corresponds to a different
+		output, denoted as out_voltageY_rawN, where N is the integer value
+		of the symbol. Writing an integer value N will select out_voltageY_rawN.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
index 1c35971277ba..ae95a5477382 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
+++ b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
@@ -53,34 +53,3 @@ KernelVersion:	5.18
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Returns the available values for the dither phase.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Toggle enable. Write 1 to enable toggle or 0 to disable it. This is
-		useful when one wants to change the DAC output codes. The way it should
-		be done is:
-
-		- disable toggle operation;
-		- change out_voltageY_raw0 and out_voltageY_raw1;
-		- enable toggle operation.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw0
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw1
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		It has the same meaning as out_voltageY_raw. This attribute is
-		specific to toggle enabled channels and refers to the DAC output
-		code in INPUT_A (_raw0) and INPUT_B (_raw1). The same scale and offset
-		as in out_voltageY_raw applies.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Performs a SW toggle. This attribute is specific to toggle
-		enabled channels and allows to toggle between out_voltageY_raw0
-		and out_voltageY_raw1 through software. Writing 0 will select
-		out_voltageY_raw0 while 1 selects out_voltageY_raw1.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
index 31dbb390573f..c431f0a13cf5 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
+++ b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
@@ -3,7 +3,7 @@ KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Reading this returns the valid values that can be written to the
-		on_altvoltage0_mode attribute:
+		filter_mode attribute:
 
 		- auto -> Adjust bandpass filter to track changes in input clock rate.
 		- manual -> disable/unregister the clock rate notifier / input clock tracking.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
index 8916f7ec6507..8dbca113112d 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
+++ b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
@@ -13,12 +13,3 @@ Description:
 		available for reading data. However, samples can be occasionally skipped
 		or repeated, depending on the beat between the capture and conversion
 		rates.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_shunt_resistor
-Date:		December 2015
-KernelVersion:	4.4
-Contact:	linux-iio@vger.kernel.org
-Description:
-		The value of the shunt resistor may be known only at runtime fom an
-		eeprom content read by a client application. This attribute allows to
-		set its value in ohms.