path: root/drivers/iio/accel/bmi088-accel-core.c

// SPDX-License-Identifier: GPL-2.0
/*
 * 3-axis accelerometer driver supporting following Bosch-Sensortec chips:
 *  - BMI088
 *
 * Copyright (c) 2018-2021, Topic Embedded Products
 */

#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <asm/unaligned.h>

#include "bmi088-accel.h"

#define BMI088_ACCEL_REG_CHIP_ID			0x00
#define BMI088_ACCEL_REG_ERROR				0x02

#define BMI088_ACCEL_REG_INT_STATUS			0x1D
#define BMI088_ACCEL_INT_STATUS_BIT_DRDY		BIT(7)

#define BMI088_ACCEL_REG_RESET				0x7E
#define BMI088_ACCEL_RESET_VAL				0xB6

#define BMI088_ACCEL_REG_PWR_CTRL			0x7D
#define BMI088_ACCEL_REG_PWR_CONF			0x7C

#define BMI088_ACCEL_REG_INT_MAP_DATA			0x58
#define BMI088_ACCEL_INT_MAP_DATA_BIT_INT1_DRDY		BIT(2)
#define BMI088_ACCEL_INT_MAP_DATA_BIT_INT2_FWM		BIT(5)

#define BMI088_ACCEL_REG_INT1_IO_CONF			0x53
#define BMI088_ACCEL_INT1_IO_CONF_BIT_ENABLE_OUT	BIT(3)
#define BMI088_ACCEL_INT1_IO_CONF_BIT_LVL		BIT(1)

#define BMI088_ACCEL_REG_INT2_IO_CONF			0x54
#define BMI088_ACCEL_INT2_IO_CONF_BIT_ENABLE_OUT	BIT(3)
#define BMI088_ACCEL_INT2_IO_CONF_BIT_LVL		BIT(1)

#define BMI088_ACCEL_REG_ACC_CONF			0x40
#define BMI088_ACCEL_MODE_ODR_MASK			0x0f

#define BMI088_ACCEL_REG_ACC_RANGE			0x41
#define BMI088_ACCEL_RANGE_3G				0x00
#define BMI088_ACCEL_RANGE_6G				0x01
#define BMI088_ACCEL_RANGE_12G				0x02
#define BMI088_ACCEL_RANGE_24G				0x03

#define BMI088_ACCEL_REG_TEMP				0x22
#define BMI088_ACCEL_REG_TEMP_SHIFT			5
#define BMI088_ACCEL_TEMP_UNIT				125
#define BMI088_ACCEL_TEMP_OFFSET			23000

#define BMI088_ACCEL_REG_XOUT_L				0x12
#define BMI088_ACCEL_AXIS_TO_REG(axis) \
	(BMI088_ACCEL_REG_XOUT_L + (axis * 2))

#define BMI088_ACCEL_MAX_STARTUP_TIME_US		1000
#define BMI088_AUTO_SUSPEND_DELAY_MS			2000

#define BMI088_ACCEL_REG_FIFO_STATUS			0x0E
#define BMI088_ACCEL_REG_FIFO_CONFIG0			0x48
#define BMI088_ACCEL_REG_FIFO_CONFIG1			0x49
#define BMI088_ACCEL_REG_FIFO_DATA			0x3F
#define BMI088_ACCEL_FIFO_LENGTH			100

#define BMI088_ACCEL_FIFO_MODE_FIFO			0x40
#define BMI088_ACCEL_FIFO_MODE_STREAM			0x80

#define BMIO088_ACCEL_ACC_RANGE_MSK			GENMASK(1, 0)

enum bmi088_accel_axis {
	AXIS_X,
	AXIS_Y,
	AXIS_Z,
};

static const int bmi088_sample_freqs[] = {
	12, 500000,
	25, 0,
	50, 0,
	100, 0,
	200, 0,
	400, 0,
	800, 0,
	1600, 0,
};

/* Available OSR (over sampling rate) sets the 3dB cut-off frequency */
enum bmi088_osr_modes {
	BMI088_ACCEL_MODE_OSR_NORMAL = 0xA,
	BMI088_ACCEL_MODE_OSR_2 = 0x9,
	BMI088_ACCEL_MODE_OSR_4 = 0x8,
};

/* Available ODR (output data rates) in Hz */
enum bmi088_odr_modes {
	BMI088_ACCEL_MODE_ODR_12_5 = 0x5,
	BMI088_ACCEL_MODE_ODR_25 = 0x6,
	BMI088_ACCEL_MODE_ODR_50 = 0x7,
	BMI088_ACCEL_MODE_ODR_100 = 0x8,
	BMI088_ACCEL_MODE_ODR_200 = 0x9,
	BMI088_ACCEL_MODE_ODR_400 = 0xa,
	BMI088_ACCEL_MODE_ODR_800 = 0xb,
	BMI088_ACCEL_MODE_ODR_1600 = 0xc,
};

struct bmi088_scale_info {
	int scale;
	u8 reg_range;
};

struct bmi088_accel_chip_info {
	const char *name;
	u8 chip_id;
	const struct iio_chan_spec *channels;
	int num_channels;
	const int scale_table[4][2];
};

struct bmi088_accel_data {
	struct regmap *regmap;
	const struct bmi088_accel_chip_info *chip_info;
	u8 buffer[2] __aligned(IIO_DMA_MINALIGN); /* shared DMA safe buffer */
};

static const struct regmap_range bmi088_volatile_ranges[] = {
	/* All registers below 0x40 are volatile, except the CHIP ID. */
	regmap_reg_range(BMI088_ACCEL_REG_ERROR, 0x3f),
	/* Mark the RESET as volatile too, it is self-clearing */
	regmap_reg_range(BMI088_ACCEL_REG_RESET, BMI088_ACCEL_REG_RESET),
};

static const struct regmap_access_table bmi088_volatile_table = {
	.yes_ranges	= bmi088_volatile_ranges,
	.n_yes_ranges	= ARRAY_SIZE(bmi088_volatile_ranges),
};

const struct regmap_config bmi088_regmap_conf = {
	.reg_bits = 8,
	.val_bits = 8,
	.max_register = 0x7E,
	.volatile_table = &bmi088_volatile_table,
	.cache_type = REGCACHE_RBTREE,
};
EXPORT_SYMBOL_NS_GPL(bmi088_regmap_conf, IIO_BMI088);

static int bmi088_accel_power_up(struct bmi088_accel_data *data)
{
	int ret;

	/* Enable accelerometer and temperature sensor */
	ret = regmap_write(data->regmap, BMI088_ACCEL_REG_PWR_CTRL, 0x4);
	if (ret)
		return ret;

	/* Datasheet recommends to wait at least 5ms before communication */
	usleep_range(5000, 6000);

	/* Disable suspend mode */
	ret = regmap_write(data->regmap, BMI088_ACCEL_REG_PWR_CONF, 0x0);
	if (ret)
		return ret;

	/* Recommended at least 1ms before further communication */
	usleep_range(1000, 1200);

	return 0;
}

static int bmi088_accel_power_down(struct bmi088_accel_data *data)
{
	int ret;

	/* Enable suspend mode */
	ret = regmap_write(data->regmap, BMI088_ACCEL_REG_PWR_CONF, 0x3);
	if (ret)
		return ret;

	/* Recommended at least 1ms before further communication */
	usleep_range(1000, 1200);

	/* Disable accelerometer and temperature sensor */
	ret = regmap_write(data->regmap, BMI088_ACCEL_REG_PWR_CTRL, 0x0);
	if (ret)
		return ret;

	/* Datasheet recommends to wait at least 5ms before communication */
	usleep_range(5000, 6000);

	return 0;
}

static int bmi088_accel_get_sample_freq(struct bmi088_accel_data *data,
					int *val, int *val2)
{
	unsigned int value;
	int ret;

	ret = regmap_read(data->regmap, BMI088_ACCEL_REG_ACC_CONF,
			  &value);
	if (ret)
		return ret;

	value &= BMI088_ACCEL_MODE_ODR_MASK;
	value -= BMI088_ACCEL_MODE_ODR_12_5;
	value <<= 1;

	if (value >= ARRAY_SIZE(bmi088_sample_freqs) - 1)
		return -EINVAL;

	*val = bmi088_sample_freqs[value];
	*val2 = bmi088_sample_freqs[value + 1];

	return IIO_VAL_INT_PLUS_MICRO;
}

static int bmi088_accel_set_sample_freq(struct bmi088_accel_data *data, int val)
{
	unsigned int regval;
	int index = 0;

	while (index < ARRAY_SIZE(bmi088_sample_freqs) &&
	       bmi088_sample_freqs[index] != val)
		index += 2;

	if (index >= ARRAY_SIZE(bmi088_sample_freqs))
		return -EINVAL;

	regval = (index >> 1) + BMI088_ACCEL_MODE_ODR_12_5;

	return regmap_update_bits(data->regmap, BMI088_ACCEL_REG_ACC_CONF,
				  BMI088_ACCEL_MODE_ODR_MASK, regval);
}

static int bmi088_accel_set_scale(struct bmi088_accel_data *data, int val, int val2)
{
	unsigned int i;

	for (i = 0; i < 4; i++)
		if (val  == data->chip_info->scale_table[i][0] &&
		    val2 == data->chip_info->scale_table[i][1])
			break;

	if (i == 4)
		return -EINVAL;

	return regmap_write(data->regmap, BMI088_ACCEL_REG_ACC_RANGE, i);
}

static int bmi088_accel_get_temp(struct bmi088_accel_data *data, int *val)
{
	int ret;
	s16 temp;

	ret = regmap_bulk_read(data->regmap, BMI088_ACCEL_REG_TEMP,
			       &data->buffer, sizeof(__be16));
	if (ret)
		return ret;

	/* data->buffer is cacheline aligned */
	temp = be16_to_cpu(*(__be16 *)data->buffer);

	*val = temp >> BMI088_ACCEL_REG_TEMP_SHIFT;

	return IIO_VAL_INT;
}

static int bmi088_accel_get_axis(struct bmi088_accel_data *data,
				 struct iio_chan_spec const *chan,
				 int *val)
{
	int ret;
	s16 raw_val;

	ret = regmap_bulk_read(data->regmap,
			       BMI088_ACCEL_AXIS_TO_REG(chan->scan_index),
			       data->buffer, sizeof(__le16));
	if (ret)
		return ret;

	raw_val = le16_to_cpu(*(__le16 *)data->buffer);
	*val = raw_val;

	return IIO_VAL_INT;
}

static int bmi088_accel_read_raw(struct iio_dev *indio_dev,
				 struct iio_chan_spec const *chan,
				 int *val, int *val2, long mask)
{
	struct bmi088_accel_data *data = iio_priv(indio_dev);
	struct device *dev = regmap_get_device(data->regmap);
	int ret;
	int reg;

	switch (mask) {
	case IIO_CHAN_INFO_RAW:
		switch (chan->type) {
		case IIO_TEMP:
			ret = pm_runtime_resume_and_get(dev);
			if (ret)
				return ret;

			ret = bmi088_accel_get_temp(data, val);
			goto out_read_raw_pm_put;
		case IIO_ACCEL:
			ret = pm_runtime_resume_and_get(dev);
			if (ret)
				return ret;

			ret = iio_device_claim_direct_mode(indio_dev);
			if (ret)
				goto out_read_raw_pm_put;

			ret = bmi088_accel_get_axis(data, chan, val);
			iio_device_release_direct_mode(indio_dev);
			if (!ret)
				ret = IIO_VAL_INT;

			goto out_read_raw_pm_put;
		default:
			return -EINVAL;
		}
	case IIO_CHAN_INFO_OFFSET:
		switch (chan->type) {
		case IIO_TEMP:
			/* Offset applies before scale */
			*val = BMI088_ACCEL_TEMP_OFFSET/BMI088_ACCEL_TEMP_UNIT;
			return IIO_VAL_INT;
		default:
			return -EINVAL;
		}
	case IIO_CHAN_INFO_SCALE:
		switch (chan->type) {
		case IIO_TEMP:
			/* 0.125 degrees per LSB */
			*val = BMI088_ACCEL_TEMP_UNIT;
			return IIO_VAL_INT;
		case IIO_ACCEL:
			ret = pm_runtime_resume_and_get(dev);
			if (ret)
				return ret;

			ret = regmap_read(data->regmap,
					  BMI088_ACCEL_REG_ACC_RANGE, &reg);
			if (ret)
				goto out_read_raw_pm_put;

			reg = FIELD_GET(BMIO088_ACCEL_ACC_RANGE_MSK, reg);
			*val  = data->chip_info->scale_table[reg][0];
			*val2 = data->chip_info->scale_table[reg][1];
			ret = IIO_VAL_INT_PLUS_MICRO;

			goto out_read_raw_pm_put;
		default:
			return -EINVAL;
		}
	case IIO_CHAN_INFO_SAMP_FREQ:
		ret = pm_runtime_resume_and_get(dev);
		if (ret)
			return ret;

		ret = bmi088_accel_get_sample_freq(data, val, val2);
		goto out_read_raw_pm_put;
	default:
		break;
	}

	return -EINVAL;

out_read_raw_pm_put:
	pm_runtime_mark_last_busy(dev);
	pm_runtime_put_autosuspend(dev);

	return ret;
}

static int bmi088_accel_read_avail(struct iio_dev *indio_dev,
			     struct iio_chan_spec const *chan,
			     const int **vals, int *type, int *length,
			     long mask)
{
	struct bmi088_accel_data *data = iio_priv(indio_dev);

	switch (mask) {
	case IIO_CHAN_INFO_SCALE:
		*vals = (const int *)data->chip_info->scale_table;
		*length = 8;
		*type = IIO_VAL_INT_PLUS_MICRO;
		return IIO_AVAIL_LIST;
	case IIO_CHAN_INFO_SAMP_FREQ:
		*type = IIO_VAL_INT_PLUS_MICRO;
		*vals = bmi088_sample_freqs;
		*length = ARRAY_SIZE(bmi088_sample_freqs);
		return IIO_AVAIL_LIST;
	default:
		return -EINVAL;
	}
}

static int bmi088_accel_write_raw(struct iio_dev *indio_dev,
				  struct iio_chan_spec const *chan,
				  int val, int val2, long mask)
{
	struct bmi088_accel_data *data = iio_priv(indio_dev);
	struct device *dev = regmap_get_device(data->regmap);
	int ret;

	switch (mask) {
	case IIO_CHAN_INFO_SCALE:
		ret = pm_runtime_resume_and_get(dev);
		if (ret)
			return ret;

		ret = bmi088_accel_set_scale(data, val, val2);
		pm_runtime_mark_last_busy(dev);
		pm_runtime_put_autosuspend(dev);
		return ret;
	case IIO_CHAN_INFO_SAMP_FREQ:
		ret = pm_runtime_resume_and_get(dev);
		if (ret)
			return ret;

		ret = bmi088_accel_set_sample_freq(data, val);
		pm_runtime_mark_last_busy(dev);
		pm_runtime_put_autosuspend(dev);
		return ret;
	default:
		return -EINVAL;
	}
}

#define BMI088_ACCEL_CHANNEL(_axis) { \
	.type = IIO_ACCEL, \
	.modified = 1, \
	.channel2 = IIO_MOD_##_axis, \
	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
				BIT(IIO_CHAN_INFO_SAMP_FREQ), \
	.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
				BIT(IIO_CHAN_INFO_SCALE), \
	.scan_index = AXIS_##_axis, \
}

static const struct iio_chan_spec bmi088_accel_channels[] = {
	{
		.type = IIO_TEMP,
		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
				      BIT(IIO_CHAN_INFO_SCALE) |
				      BIT(IIO_CHAN_INFO_OFFSET),
		.scan_index = -1,
	},
	BMI088_ACCEL_CHANNEL(X),
	BMI088_ACCEL_CHANNEL(Y),
	BMI088_ACCEL_CHANNEL(Z),
	IIO_CHAN_SOFT_TIMESTAMP(3),
};

static const struct bmi088_accel_chip_info bmi088_accel_chip_info_tbl[] = {
	[BOSCH_BMI085] = {
		.name = "bmi085-accel",
		.chip_id = 0x1F,
		.channels = bmi088_accel_channels,
		.num_channels = ARRAY_SIZE(bmi088_accel_channels),
		.scale_table = {{0, 598}, {0, 1196}, {0, 2393}, {0, 4785}},
	},
	[BOSCH_BMI088] = {
		.name = "bmi088-accel",
		.chip_id = 0x1E,
		.channels = bmi088_accel_channels,
		.num_channels = ARRAY_SIZE(bmi088_accel_channels),
		.scale_table = {{0, 897}, {0, 1794}, {0, 3589}, {0, 7178}},
	},
	[BOSCH_BMI090L] = {
		.name = "bmi090l-accel",
		.chip_id = 0x1A,
		.channels = bmi088_accel_channels,
		.num_channels = ARRAY_SIZE(bmi088_accel_channels),
		.scale_table = {{0, 897}, {0, 1794}, {0, 3589}, {0, 7178}},
	},
};

static const struct iio_info bmi088_accel_info = {
	.read_raw	= bmi088_accel_read_raw,
	.write_raw	= bmi088_accel_write_raw,
	.read_avail	= bmi088_accel_read_avail,
};

static const unsigned long bmi088_accel_scan_masks[] = {
	BIT(AXIS_X) | BIT(AXIS_Y) | BIT(AXIS_Z),
	0
};

static int bmi088_accel_chip_init(struct bmi088_accel_data *data, enum bmi_device_type type)
{
	struct device *dev = regmap_get_device(data->regmap);
	int ret, i;
	unsigned int val;

	if (type >= BOSCH_UNKNOWN)
		return -ENODEV;

	/* Do a dummy read to enable SPI interface, won't harm I2C */
	regmap_read(data->regmap, BMI088_ACCEL_REG_INT_STATUS, &val);

	/*
	 * Reset chip to get it in a known good state. A delay of 1ms after
	 * reset is required according to the data sheet
	 */
	ret = regmap_write(data->regmap, BMI088_ACCEL_REG_RESET,
			   BMI088_ACCEL_RESET_VAL);
	if (ret)
		return ret;

	usleep_range(1000, 2000);

	/* Do a dummy read again after a reset to enable the SPI interface */
	regmap_read(data->regmap, BMI088_ACCEL_REG_INT_STATUS, &val);

	/* Read chip ID */
	ret = regmap_read(data->regmap, BMI088_ACCEL_REG_CHIP_ID, &val);
	if (ret) {
		dev_err(dev, "Error: Reading chip id\n");
		return ret;
	}

	/* Validate chip ID */
	for (i = 0; i < ARRAY_SIZE(bmi088_accel_chip_info_tbl); i++)
		if (bmi088_accel_chip_info_tbl[i].chip_id == val)
			break;

	if (i == ARRAY_SIZE(bmi088_accel_chip_info_tbl))
		data->chip_info = &bmi088_accel_chip_info_tbl[type];
	else
		data->chip_info = &bmi088_accel_chip_info_tbl[i];

	if (i != type)
		dev_warn(dev, "unexpected chip id 0x%X\n", val);

	return 0;
}

int bmi088_accel_core_probe(struct device *dev, struct regmap *regmap,
	int irq, enum bmi_device_type type)
{
	struct bmi088_accel_data *data;
	struct iio_dev *indio_dev;
	int ret;

	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
	if (!indio_dev)
		return -ENOMEM;

	data = iio_priv(indio_dev);
	dev_set_drvdata(dev, indio_dev);

	data->regmap = regmap;

	ret = bmi088_accel_chip_init(data, type);
	if (ret)
		return ret;

	indio_dev->channels = data->chip_info->channels;
	indio_dev->num_channels = data->chip_info->num_channels;
	indio_dev->name = data->chip_info->name;
	indio_dev->available_scan_masks = bmi088_accel_scan_masks;
	indio_dev->modes = INDIO_DIRECT_MODE;
	indio_dev->info = &bmi088_accel_info;

	/* Enable runtime PM */
	pm_runtime_get_noresume(dev);
	pm_runtime_set_suspended(dev);
	pm_runtime_enable(dev);
	/* We need ~6ms to startup, so set the delay to 6 seconds */
	pm_runtime_set_autosuspend_delay(dev, 6000);
	pm_runtime_use_autosuspend(dev);
	pm_runtime_put(dev);

	ret = iio_device_register(indio_dev);
	if (ret)
		dev_err(dev, "Unable to register iio device\n");

	return ret;
}
EXPORT_SYMBOL_NS_GPL(bmi088_accel_core_probe, IIO_BMI088);


void bmi088_accel_core_remove(struct device *dev)
{
	struct iio_dev *indio_dev = dev_get_drvdata(dev);
	struct bmi088_accel_data *data = iio_priv(indio_dev);

	iio_device_unregister(indio_dev);

	pm_runtime_disable(dev);
	pm_runtime_set_suspended(dev);
	bmi088_accel_power_down(data);
}
EXPORT_SYMBOL_NS_GPL(bmi088_accel_core_remove, IIO_BMI088);

static int __maybe_unused bmi088_accel_runtime_suspend(struct device *dev)
{
	struct iio_dev *indio_dev = dev_get_drvdata(dev);
	struct bmi088_accel_data *data = iio_priv(indio_dev);

	return bmi088_accel_power_down(data);
}

static int __maybe_unused bmi088_accel_runtime_resume(struct device *dev)
{
	struct iio_dev *indio_dev = dev_get_drvdata(dev);
	struct bmi088_accel_data *data = iio_priv(indio_dev);

	return bmi088_accel_power_up(data);
}

const struct dev_pm_ops bmi088_accel_pm_ops = {
	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
				pm_runtime_force_resume)
	SET_RUNTIME_PM_OPS(bmi088_accel_runtime_suspend,
			   bmi088_accel_runtime_resume, NULL)
};
EXPORT_SYMBOL_NS_GPL(bmi088_accel_pm_ops, IIO_BMI088);

MODULE_AUTHOR("Niek van Agt <niek.van.agt@topicproducts.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("BMI088 accelerometer driver (core)");