1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
|
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Bosch MCAN controller Bindings
description: Bosch MCAN controller for CAN bus
maintainers:
- Sriram Dash <sriram.dash@samsung.com>
properties:
compatible:
const: bosch,m_can
reg:
items:
- description: M_CAN registers map
- description: message RAM
reg-names:
items:
- const: m_can
- const: message_ram
interrupts:
items:
- description: interrupt line0
- description: interrupt line1
minItems: 1
maxItems: 2
interrupt-names:
items:
- const: int0
- const: int1
minItems: 1
maxItems: 2
clocks:
items:
- description: peripheral clock
- description: bus clock
clock-names:
items:
- const: hclk
- const: cclk
bosch,mram-cfg:
description: |
Message RAM configuration data.
Multiple M_CAN instances can share the same Message RAM
and each element(e.g Rx FIFO or Tx Buffer and etc) number
in Message RAM is also configurable, so this property is
telling driver how the shared or private Message RAM are
used by this M_CAN controller.
The format should be as follows:
<offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
The 'offset' is an address offset of the Message RAM where
the following elements start from. This is usually set to
0x0 if you're using a private Message RAM. The remain cells
are used to specify how many elements are used for each FIFO/Buffer.
M_CAN includes the following elements according to user manual:
11-bit Filter 0-128 elements / 0-128 words
29-bit Filter 0-64 elements / 0-128 words
Rx FIFO 0 0-64 elements / 0-1152 words
Rx FIFO 1 0-64 elements / 0-1152 words
Rx Buffers 0-64 elements / 0-1152 words
Tx Event FIFO 0-32 elements / 0-64 words
Tx Buffers 0-32 elements / 0-576 words
Please refer to 2.4.1 Message RAM Configuration in Bosch
M_CAN user manual for details.
allOf:
- $ref: /schemas/types.yaml#/definitions/int32-array
- items:
items:
- description: The 'offset' is an address offset of the Message RAM
where the following elements start from. This is usually
set to 0x0 if you're using a private Message RAM.
default: 0
- description: 11-bit Filter 0-128 elements / 0-128 words
minimum: 0
maximum: 128
- description: 29-bit Filter 0-64 elements / 0-128 words
minimum: 0
maximum: 64
- description: Rx FIFO 0 0-64 elements / 0-1152 words
minimum: 0
maximum: 64
- description: Rx FIFO 1 0-64 elements / 0-1152 words
minimum: 0
maximum: 64
- description: Rx Buffers 0-64 elements / 0-1152 words
minimum: 0
maximum: 64
- description: Tx Event FIFO 0-32 elements / 0-64 words
minimum: 0
maximum: 32
- description: Tx Buffers 0-32 elements / 0-576 words
minimum: 0
maximum: 32
maxItems: 1
can-transceiver:
$ref: can-transceiver.yaml#
required:
- compatible
- reg
- reg-names
- interrupts
- interrupt-names
- clocks
- clock-names
- bosch,mram-cfg
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/imx6sx-clock.h>
can@20e8000 {
compatible = "bosch,m_can";
reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
reg-names = "m_can", "message_ram";
interrupts = <0 114 0x04>, <0 114 0x04>;
interrupt-names = "int0", "int1";
clocks = <&clks IMX6SX_CLK_CANFD>,
<&clks IMX6SX_CLK_CANFD>;
clock-names = "hclk", "cclk";
bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
can-transceiver {
max-bitrate = <5000000>;
};
};
...
|
