summaryrefslogtreecommitdiff
path: root/drivers/pwm
AgeCommit message (Collapse)AuthorFilesLines
2024-09-26Merge tag 'soc-ep93xx-dt-6.12' of ↵Linus Torvalds1-18/+8
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC update from Arnd Bergmann: "Convert ep93xx to devicetree This concludes a long journey towards replacing the old board files with devictree description on the Cirrus Logic EP93xx platform. Nikita Shubin has been working on this for a long time, for details see the last post on https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/" * tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config net: cirrus: use u8 for addr to calm down sparse dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0 dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe() pinctrl: ep93xx: Fix raster pins typo spi: ep93xx: update kerneldoc comments for ep93xx_spi clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate() clk: ep93xx: add module license dmaengine: cirrus: remove platform code ASoC: cirrus: edb93xx: Delete driver ARM: ep93xx: soc: drop defines ARM: ep93xx: delete all boardfiles ata: pata_ep93xx: remove legacy pinctrl use pwm: ep93xx: drop legacy pinctrl ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms ARM: dts: ep93xx: Add EDB9302 DT ARM: dts: ep93xx: add ts7250 board ARM: dts: add Cirrus EP93XX SoC .dtsi ...
2024-09-16pwm: stm32: Fix a typoAndrew Kreimer1-1/+1
Fix a typo in comments. Reported-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Kreimer <algonell@gmail.com> Link: https://lore.kernel.org/r/20240912124944.43284-1-algonell@gmail.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-09-16pwm: Switch back to struct platform_driver::remove()Uwe Kleine-König14-14/+14
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all pwm drivers to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240909073125.382040-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-09-16pwm: axi-pwmgen: use shared macro for version regDavid Lechner1-2/+1
The linux/fpga/adi-axi-common.h header already defines a macro for the version register offset. Use this macro in the axi-pwmgen driver instead of defining it again. Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20240816-pwm-axi-pwmgen-use-shared-macro-v1-1-994153ebc3a7@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-09-16pwm: atmel-hlcdc: Drop trailing commaLiao Chen1-2/+2
Drop the trailing comma in the terminator entry for the ID table to make code robust against misrebases. Signed-off-by: Liao Chen <liaochen4@huawei.com> Link: https://lore.kernel.org/r/20240831075059.790861-3-liaochen4@huawei.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-09-16pwm: atmel-hlcdc: Enable module autoloadingLiao Chen1-0/+1
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <liaochen4@huawei.com> Link: https://lore.kernel.org/r/20240831075059.790861-2-liaochen4@huawei.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-09-16pwm: omap-dmtimer: Use of_property_read_bool()Rob Herring (Arm)1-1/+1
Use of_property_read_bool() to read boolean properties rather than of_get_property(). This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240731191312.1710417-25-robh@kernel.org Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-09-16pwm: adp5585: Set OSC_EN bit to 1 when PWM state is enabledLiu Ying1-0/+4
It turns out that OSC_EN bit in GERNERAL_CFG register has to be set to 1 when PWM state is enabled, otherwise PWM signal won't be generated. Fixes: e9b503879fd2 ("pwm: adp5585: Add Analog Devices ADP5585 support") Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240826083337.1835405-1-victor.liu@nxp.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-09-16Merge tag 'ib-mfd-gpio-pwm-v6.12' of ↵Uwe Kleine-König3-0/+192
https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Immutable branch between MFD, GPIO and PWM due for the v6.12 merge window
2024-09-16pwm: lp3943: Fix an incorrect type in lp3943_pwm_parse_dt()Jiapeng Chong1-2/+1
The return value from the call to of_property_count_u32_elems() is int. However, the return value is being assigned to an u32 variable 'num_outputs', so making 'num_outputs' an int. ./drivers/pwm/pwm-lp3943.c:238:6-17: WARNING: Unsigned expression compared with zero: num_outputs <= 0. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9710 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Fixes: 75f0cb339b78 ("pwm: lp3943: Use of_property_count_u32_elems() to get property length") Link: https://lore.kernel.org/r/20240809080523.32717-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-09-12pwm: ep93xx: drop legacy pinctrlNikita Shubin1-18/+0
Drop legacy gpio request/free since we are using pinctrl for this now. Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-12pwm: ep93xx: add DT support for Cirrus EP93xxNikita Shubin1-0/+8
Add OF ID match table. Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Tested-by: Michael Peters <mpeters@embeddedTS.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Kris Bahnsen <kris@embeddedTS.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Damien Le Moal <dlemoal@kernel.org> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-05pwm: Simplify pwm_capture()Uwe Kleine-König1-4/+4
When pwm_capture() is called, pwm is valid, so the checks for pwm and pwm->chip->ops being NULL can be dropped. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/ee7b3322c7b3e28defdfb886a70b8ba40d298416.1722261050.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-09-05pwm: lp3943: Use of_property_count_u32_elems() to get property lengthRob Herring (Arm)1-6/+3
Replace of_get_property() with the type specific of_property_count_u32_elems() to get the property length. This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240731201407.1838385-8-robh@kernel.org Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-09-05pwm: Don't export pwm_capture()Uwe Kleine-König1-3/+2
There is only a single caller of this function, and that's in drivers/pwm/core.c itself. So don't export the function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240712171821.1470833-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-09-05pwm: stm32: Use the right CCxNP bit in stm32_pwm_enable()Uwe Kleine-König1-1/+1
The pwm devices for a pwm_chip are numbered starting at 0, the first hw channel however has the number 1. While introducing a parametrised macro to simplify register bit usage and making that offset explicit, one of the usages was converted wrongly. This is fixed here. Fixes: 7cea05ae1d4e ("pwm-stm32: Make use of parametrised register definitions") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240905090627.197536-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-08-01pwm: adp5585: Add Analog Devices ADP5585 supportClark Wang3-0/+192
The ADP5585 is a 10/11 input/output port expander with a built in keypad matrix decoder, programmable logic, reset generator, and PWM generator. This driver supports the PWM function using the platform device registered by the core MFD driver. The driver is derived from an initial implementation from NXP, available in commit 113113742208 ("MLK-25922-1 pwm: adp5585: add adp5585 PWM support") in their BSP kernel tree. It has been extensively rewritten. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Uwe Kleine-König <ukleinek@kernel.org> Link: https://lore.kernel.org/r/20240722121100.2855-5-laurent.pinchart@ideasonboard.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-07-25of: remove internal arguments from of_property_for_each_u32()Luca Ceresoli1-3/+1
The of_property_for_each_u32() macro needs five parameters, two of which are primarily meant as internal variables for the macro itself (in the for() clause). Yet these two parameters are used by a few drivers, and this can be considered misuse or at least bad practice. Now that the kernel uses C11 to build, these two parameters can be avoided by declaring them internally, thus changing this pattern: struct property *prop; const __be32 *p; u32 val; of_property_for_each_u32(np, "xyz", prop, p, val) { ... } to this: u32 val; of_property_for_each_u32(np, "xyz", val) { ... } However two variables cannot be declared in the for clause even with C11, so declare one struct that contain the two variables we actually need. As the variables inside this struct are not meant to be used by users of this macro, give the struct instance the noticeable name "_it" so it is visible during code reviews, helping to avoid new code to use it directly. Most usages are trivially converted as they do not use those two parameters, as expected. The non-trivial cases are: - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the checks had to be replicated in a different way, making code more verbose and somewhat uglier, but I refrained from a full rework to keep as much of the original code untouched having no hardware to test my changes All the changes have been build tested. The few for which I have the hardware have been runtime-tested too. Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-07-11pwm: axi-pwmgen: add .max_register to regmapTrevor Gamblin1-0/+1
This was missed in the basic driver and is useful for debug, so add it. Example regmap output before the patch: |root@zed-tg:~# cat /sys/kernel/debug/regmap/44a60000.pwm/registers |0: 00020100 And with it: |root@zed-tg:~# cat /sys/kernel/debug/regmap/44a60000.pwm/registers |00: 00020100 |04: 00000000 |08: 00000000 |0c: 601a3471 |10: 00000000 |14: 00000002 |18: 00000001 |1c: 00000000 |... Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com> Link: https://lore.kernel.org/r/20240711125743.3956935-1-tgamblin@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: atmel-tcb: Make private data variable naming consistentUwe Kleine-König1-45/+45
Currently the variables of type struct atmel_tcb_pwm_device are named "tcbpwm", and variables of type atmel_tcb_pwm_chip are either named "tcbpwm" (too!) or "tcbpwmc". Rename the chips with device name to "tcbpwmc" to get a consistent naming. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20240709092221.47025-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: atmel-tcb: Simplify checking the companion outputUwe Kleine-König1-8/+3
The two outputs provided by the supported hardware share some settings, so access to the other PWM is required when one of them is configured. Instead of an explicit if to deterimine the other PWM just use hwpwm ^ 1. Further atcbpwm is never NULL, so drop the corresponding check. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20240709101806.52394-4-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Allow pwm state transitions from an invalid stateUwe Kleine-König1-2/+37
While driving a PWM via the sysfs API it's hard to determine the right order of writes to the pseudo files "period" and "duty_cycle": If you want to go from duty_cycle/period = 50/100 to 150/300 you have to write period first (because 150/100 is invalid). If however you start at 400/500 the duty_cycle must be configured first. The rule that works is: If you increase period write period first, otherwise write duty_cycle first. A complication however is that it's usually sensible to configure the polarity before both period and duty_cycle. This can only be done if the current state's duty_cycle and period configuration isn't bogus though. It is still worse (but I think only theoretic) if you have a PWM that only supports inverted polarity and you start with period = 0 and polarity = normal. Then you can change neither period (because polarity = normal is refused) nor polarity (because there is still period = 0). To simplify the corner cases for userspace, let invalid target states pass if the current state is invalid already. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240628103519.105020-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: xilinx: Simplify using devm_ functionsUwe Kleine-König1-21/+6
There are devm variants for clk_prepare_enable() and pwmchip_add(); and clk_prepare_enable() can be done together with devm_clk_get(). This allows to simplify the error paths in .probe() and drop .remove() completely. With the remove callback gone, the last user of platform_get_drvdata() is gone and so the call to platform_set_drvdata() can be dropped, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20240628063524.92907-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Use guards for pwm_lookup_lock instead of explicity mutex_lock + ↵Uwe Kleine-König1-29/+22
mutex_unlock With the compiler caring for unlocking the mutex several functions can be simplified. Benefit from that. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/28807cb5d9dbce66860f74829c0f57cd9c01373e.1719520143.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Use guards for export->lock instead of explicity mutex_lock + mutex_unlockUwe Kleine-König1-11/+8
With the compiler caring for unlocking the mutex several functions can be simplified. Benefit from that. There is just one caller left for mutex_lock(&export->lock). The code flow is too complicated there to convert it to the compiler assisted variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/210010f2e579a92476462726e18e0135f6854909.1719520143.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Use guards for pwm_lock instead of explicity mutex_lock + mutex_unlockUwe Kleine-König1-37/+15
With the compiler caring for unlocking the mutex several functions can be simplified. Benefit from that. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/2102fe8189bdf1f02ff3785b551a69be27a65af4.1719520143.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Register debugfs operations after the pwm classUwe Kleine-König1-1/+9
While the debugfs operations don't technically depend on an initialized class, they loop over the idr that only can get entries when the class is properly initialized. This also fixes the ugly (but harmless) corner case that the debugfs file stays around after the pwm class failed to initialize. While at it, add an appropriate error message when class initialization fails. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240626222529.2901200-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: imx-tpm: Enable pinctrl setting for sleep stateShenwei Wang1-2/+14
Apply the pinctrl setting of sleep state when system enters suspend state. Restore to the default pinctrl setting when system resumes. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20240702164514.11007-1-shenwei.wang@nxp.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: lpss: drop redundant runtime PM handlesRaag Jadav1-22/+0
We no longer need empty runtime PM handles for PCI devices after commits [1] and [2]. Drop them and let PCI core take care of power state transitions. [1] c5eb1190074c ("PCI / PM: Allow runtime PM without callback functions") [2] fa885b06ec7e ("PCI/PM: Allow runtime PM with no PM callbacks at all") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Raag Jadav <raag.jadav@intel.com> Link: https://lore.kernel.org/r/20240605131533.20037-3-raag.jadav@intel.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: lpss: use devm_pm_runtime_enable() helperRaag Jadav1-9/+1
Use devm_pm_runtime_enable() helper to enable runtime PM and drop redundant platform ->remove() callback. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Raag Jadav <raag.jadav@intel.com> Link: https://lore.kernel.org/r/20240605131533.20037-2-raag.jadav@intel.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm-stm32: Make use of parametrised register definitionsUwe Kleine-König1-11/+11
There is no semantic change, but it is a nicer on the eyes of a reader, because TIM_CCR1 + 4 * ch encodes internal register knowledge, while TIM_CCRx(ch + 1) keeps that information completely in the header defining the registers. While I expected this to not result in any changes in the binary, gcc 13 (as provided by Debian in the gcc-13-arm-linux-gnueabihf 13.2.0-12cross1 package) compiles the new version with an allmodconfig to more compact code: $ source/scripts/bloat-o-meter drivers/pwm/pwm-stm32.o-pre drivers/pwm/pwm-stm32.o add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-488 (-488) Function old new delta stm32_pwm_get_state 968 936 -32 stm32_pwm_apply_locked 1920 1464 -456 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/d7ef7a6158df4ba6687233b0e00d37796b069fb3.1718791090.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: meson: Add support for Amlogic S4 PWMJunyi Zhao1-0/+39
Add support for Amlogic S4 PWM. Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com> Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com> Reviewed-by: George Stark <gnstark@salutedevices.com> Link: https://lore.kernel.org/r/20240613-s4-pwm-v8-1-b5bd0a768282@amlogic.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Add GPIO PWM driverVincent Whitchurch3-0/+253
Add a software PWM which toggles a GPIO from a high-resolution timer. This will naturally not be as accurate or as efficient as a hardware PWM, but it is useful in some cases. I have for example used it for evaluating LED brightness handling (via leds-pwm) on a board where the LED was just hooked up to a GPIO, and for a simple verification of the timer frequency on another platform. Since high-resolution timers are used, sleeping GPIO chips are not supported and are rejected in the probe function. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Co-developed-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Co-developed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20240604-pwm-gpio-v7-2-6b67cf60db92@linaro.org Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Make pwm_request_from_chip() private to the coreUwe Kleine-König1-5/+3
The last user of this function outside of core.c is gone, so it can be made static. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/20240607084416.897777-8-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: cros-ec: Simplify device tree xlationUwe Kleine-König1-20/+12
The cros-ec device tree binding only uses #pwm-cells = <1>, and so there is no period provided in the device tree. Up to now this was handled by hardcoding the period to the only supported value in the custom xlate callback. Apart from that, the default xlate callback (i.e. of_pwm_xlate_with_flags()) handles this just fine (and better, e.g. by checking args->args_count >= 1 before accessing args->args[0]). To simplify make use of of_pwm_xlate_with_flags(), drop the custom callback and provide the default period in .probe() already. Apart from simplifying the driver this also drops the last non-core user of pwm_request_from_chip() and so makes further simplifications possible. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/20240607084416.897777-7-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: cros-ec: Don't care about consumers in .get_state()Uwe Kleine-König1-33/+1
The get_state() callback is never called (in a visible way) after there is a consumer for a pwm device. The core handles loosing the information about duty_cycle just fine. Simplify the driver accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/20240607084416.897777-6-u.kleine-koenig@baylibre.com [Drop kdoc comment for channel to make W=1 builds happy] Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Make use of a symbol namespace for the coreUwe Kleine-König1-0/+2
Define all pwm core's symbols in the namespace "PWM". The necessary module import statement is just added to the main header, this way every file that knows about the public functions automatically has this namespace available. Thanks to Biju Das for pointing out a cut'n'paste failure in my initial patch. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240607160012.1206874-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: add missing MODULE_DESCRIPTION() macrosJeff Johnson8-0/+8
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-imx1.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-imx27.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-intel-lgm.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-mediatek.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-pxa.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-samsung.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-spear.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pwm/pwm-visconti.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240610-md-drivers-pwm-v2-1-b337cfaa70ea@quicinc.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: axi-pwmgen: Make use of regmap_clear_bits()Uwe Kleine-König1-1/+1
Instead of using regmap_update_bits() and passing val=0, better use regmap_clear_bits(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Trevor Gamblin <tgamblin@baylibre.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240606164047.534741-6-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: jz4740: Another few conversions to regmap_{set,clear}_bits()Uwe Kleine-König1-5/+4
Similar to commit 7d9199995412 ("pwm: jz4740: Use regmap_{set,clear}_bits") convert two more regmap_update_bits() calls to regmap_{set,clear}_bits() which were missed back then. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20240606164047.534741-5-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: Add driver for AXI PWM generatorDrew Fustini3-0/+255
Add support for the Analog Devices AXI PWM Generator. This device is an FPGA-implemented peripheral used as PWM signal generator and can be interfaced with AXI4. The register map of this peripheral makes it possible to configure the period and duty cycle of the output signal. Link: https://analogdevicesinc.github.io/hdl/library/axi_pwm_gen/index.html Co-developed-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Co-developed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Drew Fustini <dfustini@baylibre.com> Acked-by: Nuno Sa <nuno.sa@analog.com> Co-developed-by: Trevor Gamblin <tgamblin@baylibre.com> Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com> Link: https://lore.kernel.org/r/20240605203507.1934434-3-tgamblin@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-10pwm: atmel-tcb: Fix race condition and convert to guardsUwe Kleine-König1-7/+5
The hardware only supports a single period length for both PWM outputs. So atmel_tcb_pwm_config() checks the configuration of the other output if it's compatible with the currently requested setting. The register values are then actually updated in atmel_tcb_pwm_enable(). To make this race free the lock must be held during the whole process, so grab the lock in .apply() instead of individually in atmel_tcb_pwm_disable() and atmel_tcb_pwm_enable() which then also covers atmel_tcb_pwm_config(). To simplify handling, use the guard helper to let the compiler care for unlocking. Otherwise unlocking would be more difficult as there is more than one exit path in atmel_tcb_pwm_apply(). Fixes: 9421bade0765 ("pwm: atmel: add Timer Counter Block PWM driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20240709101806.52394-3-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-07-05pwm: stm32: Always do lazy disablingUwe Kleine-König1-2/+3
When the state changes from enabled to disabled, polarity, duty_cycle and period are not configured in hardware and TIM_CCER_CCxE is just cleared. However if the state changes from one disabled state to another, all parameters are written to hardware because the early exit from stm32_pwm_apply() is only taken if the pwm is currently enabled. This yields surprises like: Applying { .period = 1, .duty_cycle = 0, .enabled = false } succeeds if the pwm is initially on, but fails if it's already off because 1 is a too small period. Update the check for lazy disable to always exit early if the target state is disabled, no matter what is currently configured. Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240703110010.672654-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-06-22pwm: stm32: Fix error message to not describe the previous error pathUwe Kleine-König1-1/+2
"Failed to lock the clock" is an appropriate error message for clk_rate_exclusive_get() failing, but not for the clock running too fast for the driver's calculations. Adapt the error message accordingly. Fixes: d44d635635a7 ("pwm: stm32: Fix for settings using period > UINT32_MAX") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/285182163211203fc823a65b180761f46e828dcb.1718979150.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-06-22pwm: stm32: Fix calculation of prescalerUwe Kleine-König1-6/+12
A small prescaler is beneficial, as this improves the resolution of the duty_cycle configuration. However if the prescaler is too small, the maximal possible period becomes considerably smaller than the requested value. One situation where this goes wrong is the following: With a parent clock rate of 208877930 Hz and max_arr = 0xffff = 65535, a request for period = 941243 ns currently results in PSC = 1. The value for ARR is then calculated to ARR = 941243 * 208877930 / (1000000000 * 2) - 1 = 98301 This value is bigger than 65535 however and so doesn't fit into the respective register field. In this particular case the PWM was configured for a period of 313733.4806027616 ns (with ARR = 98301 & 0xffff). Even if ARR was configured to its maximal value, only period = 627495.6861167669 ns would be achievable. Fix the calculation accordingly and adapt the comment to match the new algorithm. With the calculation fixed the above case results in PSC = 2 and so an actual period of 941229.1667195285 ns. Fixes: 8002fbeef1e4 ("pwm: stm32: Calculate prescaler with a division instead of a loop") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/b4d96b79917617434a540df45f20cb5de4142f88.1718979150.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-06-21pwm: stm32: Refuse too small period requestsUwe Kleine-König1-0/+2
If period_ns is small, prd might well become 0. Catch that case because otherwise with regmap_write(priv->regmap, TIM_ARR, prd - 1); a few lines down quite a big period is configured. Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm") Cc: stable@vger.kernel.org Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/b86f62f099983646f97eeb6bfc0117bb2d0c340d.1718979150.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-05-10pwm: pca9685: Drop explicit initialization of struct ↵Uwe Kleine-König1-2/+2
i2c_device_id::driver_data to 0 The driver doesn't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove the trailing commas after the sentinel entry. Link: https://lore.kernel.org/r/20240508130618.2148631-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-04-30pwm: meson: Use mul_u64_u64_div_u64() for frequency calculatingGeorge Stark1-2/+2
While calculating frequency for the given period u64 numbers are multiplied before division what can lead to overflow in theory so use secure mul_u64_u64_div_u64() which handles overflow correctly. Fixes: 329db102a26d ("pwm: meson: make full use of common clock framework") Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: George Stark <gnstark@salutedevices.com> Link: https://lore.kernel.org/r/20240425171253.2752877-4-gnstark@salutedevices.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-04-30pwm: meson: Add check for error from clk_round_rate()George Stark1-5/+6
clk_round_rate() can return not only zero if requested frequency can not be provided but also negative error code so add check for it too. Also change type of variable holding clk_round_rate() result from unsigned long to long. It's safe due to clk_round_rate() returns long. Fixes: 329db102a26d ("pwm: meson: make full use of common clock framework") Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com> Signed-off-by: George Stark <gnstark@salutedevices.com> Link: https://lore.kernel.org/r/20240425171253.2752877-3-gnstark@salutedevices.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2024-04-30pwm: meson: Drop unneeded check in .get_state()George Stark1-3/+0
Drop checking state argument for NULL pointer in meson_pwm_get_state() due to it is called only from pwm core with always valid arguments. Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com> Signed-off-by: George Stark <gnstark@salutedevices.com> Link: https://lore.kernel.org/r/20240425171253.2752877-2-gnstark@salutedevices.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 18:48:52 +0000