summaryrefslogtreecommitdiff
path: root/drivers/acpi/scan.c
AgeCommit message (Collapse)AuthorFilesLines
2024-09-11Merge branches 'acpi-ec', 'acpi-sysfs', 'acpi-utils' and 'acpi-soc'Rafael J. Wysocki1-4/+2
Merge an ACPI EC driver update, ACPI sysfs interface updates, an ACPI library function update, and an ACPI APD driver update for 6.12-rc1: - Do not release locks during operation region accesses in the ACPI EC driver (Rafael Wysocki). - Fix up the _STR handling in the ACPI device object sysfs interface, make it represent the device object attributes as an attribute group and make it rely on driver core functionality for sysfs attrubute management (Thomas Weißschuh). - Extend error messages printed to the kernel log when acpi_evaluate_dsm() fails to include revision and function number (David Wang). - Add a new AMDI0015 platform device ID to the ACPi APD driver for AMD SoCs (Shyam Sundar S K). * acpi-ec: ACPI: EC: Do not release locks during operation region accesses * acpi-sysfs: ACPI: sysfs: remove return value of acpi_device_setup_files() ACPI: sysfs: manage sysfs attributes through device core ACPI: sysfs: manage attributes as attribute_group ACPI: sysfs: evaluate _STR on each sysfs access ACPI: sysfs: validate return type of _STR method * acpi-utils: ACPI: utils: Add rev/func to message when acpi_evaluate_dsm() fails * acpi-soc: ACPI: APD: Add AMDI0015 as platform device
2024-08-27ACPI: pci_link: Clear the dependencies after probeSunil V L1-0/+1
RISC-V platforms need to use dependencies between PCI host bridge, Link devices and the interrupt controllers to ensure probe order. The dependency is like below. Interrupt controller <-- Link Device <-- PCI Host bridge. If there is no dependency between Link device and PCI Host Bridge, then PCI devices may be probed prior to Link devices. If a PCI device is probed before its Link device, we won't be able to find its INTx mapping. So, add the link device's HID to dependency honor list and clear the dependency after probe is done so that the dependent devices are unblocked to probe. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://patch.msgid.link/20240812005929.113499-9-sunilvl@ventanamicro.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-08-27ACPI: scan: Define weak function to populate dependenciesSunil V L1-0/+11
Some architectures like RISC-V need to add dependencies without explicit _DEP. Define a weak function which can be implemented by the architecture. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://patch.msgid.link/20240812005929.113499-7-sunilvl@ventanamicro.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-08-27ACPI: scan: Add RISC-V interrupt controllers to honor listSunil V L1-0/+2
RISC-V PLIC and APLIC will have dependency from devices using GSI. So, add these devices to the honor list. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://patch.msgid.link/20240812005929.113499-6-sunilvl@ventanamicro.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-08-27ACPI: scan: Refactor dependency creationSunil V L1-39/+47
Some architectures like RISC-V will use implicit dependencies like GSI map to create dependencies between interrupt controller and devices. To support doing that, the function which creates the dependency, is refactored bit and made public so that dependency can be added from outside of scan.c as well. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://patch.msgid.link/20240812005929.113499-5-sunilvl@ventanamicro.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-08-27ACPI: scan: Add a weak arch_sort_irqchip_probe() to order the IRQCHIP probeSunil V L1-0/+3
Unlike OF framework, the irqchip probe using IRQCHIP_ACPI_DECLARE has no order defined. Depending on the Makefile is not a good idea. So, usually it is worked around by mandating only root interrupt controller probed using IRQCHIP_ACPI_DECLARE and other interrupt controllers are probed via cascade mechanism. However, this is also not a clean solution because if there are multiple root controllers (ex: RINTC in RISC-V which is per CPU) which need to be probed first, then the cascade will happen for every root controller. So, introduce an architecture specific weak function arch_sort_irqchip_probe() to order the probing of the interrupt controllers which can be implemented by different architectures as per their interrupt controller hierarchy. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Link: https://patch.msgid.link/20240812005929.113499-3-sunilvl@ventanamicro.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-08-13ACPI: EC: Evaluate _REG outside the EC scope more carefullyRafael J. Wysocki1-0/+2
Commit 60fa6ae6e6d0 ("ACPI: EC: Install address space handler at the namespace root") caused _REG methods for EC operation regions outside the EC device scope to be evaluated which on some systems leads to the evaluation of _REG methods in the scopes of device objects representing devices that are not present and not functional according to the _STA return values. Some of those device objects represent EC "alternatives" and if _REG is evaluated for their operation regions, the platform firmware may be confused and the platform may start to behave incorrectly. To avoid this problem, only evaluate _REG for EC operation regions located in the scopes of device objects representing known-to-be-present devices. For this purpose, partially revert commit 60fa6ae6e6d0 and trigger the evaluation of _REG for EC operation regions from acpi_bus_attach() for the known-valid devices. Fixes: 60fa6ae6e6d0 ("ACPI: EC: Install address space handler at the namespace root") Link: https://lore.kernel.org/linux-acpi/1f76b7e2-1928-4598-8037-28a1785c2d13@redhat.com Link: https://bugzilla.redhat.com/show_bug.cgi?id=2298938 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2302253 Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: All applicable <stable@vger.kernel.org> Link: https://patch.msgid.link/23612351.6Emhk5qWAg@rjwysocki.net
2024-08-02ACPI: sysfs: remove return value of acpi_device_setup_files()Thomas Weißschuh1-4/+1
The function can not fail anymore, so drop its return value. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-5-058ab0667fa8@weissschuh.net Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-08-02ACPI: sysfs: manage sysfs attributes through device coreThomas Weißschuh1-0/+1
Now that the ACPI sysfs attributes are organized around an attribute_group, the device core can manage them. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-4-058ab0667fa8@weissschuh.net [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-07-19Merge tag 'iommu-updates-v6.11' of ↵Linus Torvalds1-28/+8
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu updates from Will Deacon: "Core: - Support for the "ats-supported" device-tree property - Removal of the 'ops' field from 'struct iommu_fwspec' - Introduction of iommu_paging_domain_alloc() and partial conversion of existing users - Introduce 'struct iommu_attach_handle' and provide corresponding IOMMU interfaces which will be used by the IOMMUFD subsystem - Remove stale documentation - Add missing MODULE_DESCRIPTION() macro - Misc cleanups Allwinner Sun50i: - Ensure bypass mode is disabled on H616 SoCs - Ensure page-tables are allocated below 4GiB for the 32-bit page-table walker - Add new device-tree compatible strings AMD Vi: - Use try_cmpxchg64() instead of cmpxchg64() when updating pte Arm SMMUv2: - Print much more useful information on context faults - Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n - Add new Qualcomm device-tree bindings Arm SMMUv3: - Support for hardware update of access/dirty bits and reporting via IOMMUFD - More driver rework from Jason, this time updating the PASID/SVA support to prepare for full IOMMUFD support - Add missing MODULE_DESCRIPTION() macro - Minor fixes and cleanups NVIDIA Tegra: - Fix for benign fwspec initialisation issue exposed by rework on the core branch Intel VT-d: - Use try_cmpxchg64() instead of cmpxchg64() when updating pte - Use READ_ONCE() to read volatile descriptor status - Remove support for handling Execute-Requested requests - Avoid calling iommu_domain_alloc() - Minor fixes and refactoring Qualcomm MSM: - Updates to the device-tree bindings" * tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits) iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init() iommu/vt-d: Fix identity map bounds in si_domain_init() iommu: Move IOMMU_DIRTY_NO_CLEAR define dt-bindings: iommu: Convert msm,iommu-v0 to yaml iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address() iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP iommu/of: Support ats-supported device-tree property dt-bindings: PCI: generic: Add ats-supported property iommu: Remove iommu_fwspec ops OF: Simplify of_iommu_configure() ACPI: Retire acpi_iommu_fwspec_ops() iommu: Resolve fwspec ops automatically iommu/mediatek-v1: Clean up redundant fwspec checks RDMA/usnic: Use iommu_paging_domain_alloc() wifi: ath11k: Use iommu_paging_domain_alloc() wifi: ath10k: Use iommu_paging_domain_alloc() drm/msm: Use iommu_paging_domain_alloc() vhost-vdpa: Use iommu_paging_domain_alloc() ...
2024-07-04ACPI: Retire acpi_iommu_fwspec_ops()Robin Murphy1-23/+5
Now that iommu_fwspec_init() can signal for probe deferral directly, acpi_iommu_fwspec_ops() is unneeded and can be cleaned up. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/011e39e275aba3ad451c5a1965ca8ddf20ed36c2.1719919669.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2024-07-04iommu: Resolve fwspec ops automaticallyRobin Murphy1-5/+3
There's no real need for callers to resolve ops from a fwnode in order to then pass both to iommu_fwspec_init() - it's simpler and more sensible for that to resolve the ops itself. This in turn means we can centralise the notion of checking for a present driver, and enforce that fwspecs aren't allocated unless and until we know they will be usable. Also use this opportunity to modernise with some "new" helpers that arrived shortly after this code was first written; the generic fwnode_handle_get() clears up that ugly get/put mismatch, while of_fwnode_handle() can now abstract those open-coded dereferences. Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/0e2727adeb8cd73274425322f2f793561bdc927e.1719919669.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2024-06-28ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplugJames Morse1-3/+27
struct acpi_scan_handler has a detach callback that is used to remove a driver when a bus is changed. When interacting with an eject-request, the detach callback is called before _EJ0. This means the ACPI processor driver can't use _STA to determine if a CPU has been made not-present, or some of the other _STA bits have been changed. acpi_processor_remove() needs to know the value of _STA after _EJ0 has been called. Add a post_eject callback to struct acpi_scan_handler. This is called after acpi_scan_hot_remove() has successfully called _EJ0. Because acpi_scan_check_and_detach() also clears the handler pointer, it needs to be told if the caller will go on to call acpi_bus_post_eject(), so that acpi_device_clear_enumerated() and clearing the handler pointer can be deferred. An extra flag is added to flags field introduced in the previous patch to achieve this. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Tested-by: Miguel Luis <miguel.luis@oracle.com> Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com> Tested-by: Jianyong Wu <jianyong.wu@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240529133446.28446-11-Jonathan.Cameron@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-06-28ACPI: scan: switch to flags for acpi_scan_check_and_detach()Jonathan Cameron1-5/+12
Precursor patch adds the ability to pass a uintptr_t of flags into acpi_scan_check_and detach() so that additional flags can be added to indicate whether to defer portions of the eject flow. The new flag follows in the next patch. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Tested-by: Miguel Luis <miguel.luis@oracle.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240529133446.28446-10-Jonathan.Cameron@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-05-18Merge tag 'iommu-updates-v6.10' of ↵Linus Torvalds1-6/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "Core: - IOMMU memory usage observability - This will make the memory used for IO page tables explicitly visible. - Simplify arch_setup_dma_ops() Intel VT-d: - Consolidate domain cache invalidation - Remove private data from page fault message - Allocate DMAR fault interrupts locally - Cleanup and refactoring ARM-SMMUv2: - Support for fault debugging hardware on Qualcomm implementations - Re-land support for the ->domain_alloc_paging() callback ARM-SMMUv3: - Improve handling of MSI allocation failure - Drop support for the "disable_bypass" cmdline option - Major rework of the CD creation code, following on directly from the STE rework merged last time around. - Add unit tests for the new STE/CD manipulation logic AMD-Vi: - Final part of SVA changes with generic IO page fault handling Renesas IPMMU: - Add support for R8A779H0 hardware ... and a couple smaller fixes and updates across the sub-tree" * tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (80 commits) iommu/arm-smmu-v3: Make the kunit into a module arm64: Properly clean up iommu-dma remnants iommu/amd: Enable Guest Translation after reading IOMMU feature register iommu/vt-d: Decouple igfx_off from graphic identity mapping iommu/amd: Fix compilation error iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd() iommu/arm-smmu-v3: Move the CD generation for SVA into a function iommu/arm-smmu-v3: Allocate the CD table entry in advance iommu/arm-smmu-v3: Make arm_smmu_alloc_cd_ptr() iommu/arm-smmu-v3: Consolidate clearing a CD table entry iommu/arm-smmu-v3: Move the CD generation for S1 domains into a function iommu/arm-smmu-v3: Make CD programming use arm_smmu_write_entry() iommu/arm-smmu-v3: Add an ops indirection to the STE code iommu/arm-smmu-qcom: Don't build debug features as a kernel module iommu/amd: Add SVA domain support iommu: Add ops->domain_alloc_sva() iommu/amd: Initial SVA support for AMD IOMMU iommu/amd: Add support for enable/disable IOPF iommu/amd: Add IO page fault notifier handler ...
2024-05-13Merge branches 'arm/renesas', 'arm/smmu', 'x86/amd', 'core' and 'x86/vt-d' ↵Joerg Roedel1-6/+1
into next
2024-04-30ACPI: scan: Avoid enumerating devices with clearly invalid _STA valuesRafael J. Wysocki1-1/+1
The return value of _STA with the "present" bit unset and the "enabled" bit set is clearly invalid as per the ACPI specification, Section 6.3.7 "_STA (Device Status)", so make the ACPI device enumeration code disregard devices with such _STA return values. Also, because this implies that status.enabled will only be set if status.present is set too, acpi_device_is_enabled() can be modified to simply return the value of the former. Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#sta-device-status Link: https://lore.kernel.org/linux-acpi/88179311a503493099028c12ca37d430@huawei.com/ Suggested-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
2024-04-26dma-mapping: Simplify arch_setup_dma_ops()Robin Murphy1-6/+1
The dma_base, size and iommu arguments are only used by ARM, and can now easily be deduced from the device itself, so there's no need to pass them through the callchain as well. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Michael Kelley <mhklinux@outlook.com> # For Hyper-V Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/5291c2326eab405b1aa7693aa964e8d3cb7193de.1713523152.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-04-11Merge back earlier ACPI device enumeration changes for 6.10.Rafael J. Wysocki1-14/+14
2024-04-08ACPI: scan: Do not increase dep_unmet for already met dependenciesHans de Goede1-1/+2
On the Toshiba Encore WT10-A tablet the BATC battery ACPI device depends on 3 other devices: Name (_DEP, Package (0x03) // _DEP: Dependencies { I2C1, GPO2, GPO0 }) acpi_scan_check_dep() adds all 3 of these to the acpi_dep_list and then before an acpi_device is created for the BATC handle (and thus before acpi_scan_dep_init() runs) acpi_scan_clear_dep() gets called for both GPIO depenencies, with free_when_met not set for the dependencies. Since there is no adev for BATC yet, there also is no dep_unmet to decrement. The only result of acpi_scan_clear_dep() in this case is dep->met getting set. Soon after acpi_scan_clear_dep() has been called for the GPIO dependencies the acpi_device gets created for the BATC handle and acpi_scan_dep_init() runs, this sees 3 dependencies on the acpi_dep_list and initializes unmet_dep to 3. Later when the dependency for I2C1 is met unmet_dep becomes 2, but since the 2 GPIO deps where already met it never becomes 0 causing battery monitoring to not work. Fix this by modifying acpi_scan_dep_init() to not increase dep_met for dependencies which have already been marked as being met. Fixes: 3ba12d8de3fa ("ACPI: scan: Reduce overhead related to devices with dependencies") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: 6.5+ <stable@vger.kernel.org> # 6.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-04ACPI: scan: Introduce typedef:s for struct acpi_hotplug_context membersAndy Shevchenko1-3/+2
Follow the struct acpi_device_ops approach and introduce typedef:s for the members. It makes code less verbose and more particular on what parameters we take or types we use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-04ACPI: scan: Use standard error checking patternAndy Shevchenko1-4/+5
Check for an error and return it as it's the usual way to handle this. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-04ACPI: scan: Move misleading comment to acpi_dma_configure_id()Andy Shevchenko1-5/+5
The acpi_iommu_configure_id() implementation has a misleading comment since after it the flow does something different to what it states. Move the commit to the caller and with that unshadow the error code inside acpi_iommu_configure_id(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-04ACPI: scan: Use list_first_entry_or_null() in acpi_device_hid()Andy Shevchenko1-2/+2
To replace list_empty() + list_first_entry() pair to simplify code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-03-14Merge tag 'sound-6.9-rc1' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This was a relatively calm development cycle. Most of changes are rather small device-specific fixes and enhancements. The only significant changes in ALSA core are code refactoring with the recent cleanup infrastructure, which should bring no functionality changes. Some highlights below: Core: - Lots of cleanups in ALSA core code with automatic kfree cleanup and locking guard macros - New ALSA core kunit test ASoC: - SoundWire support for AMD ACP 6.3 systems - Support for reporting version information for AVS firmware - Support DSPless mode for Intel Soundwire systems - Support for configuring CS35L56 amplifiers using EFI calibration data - Log which component is being operated on as part of power management trace events. - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x HD- and USB-audio: - More Cirrus HD-audio codec support - TAS2781 HD-audio codec fixes - Scarlett2 mixer fixes Others: - Enhancement of virtio driver for audio control supports - Cleanups of legacy PM code with new macros - Firewire sound updates" * tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits) ALSA: usb-audio: Stop parsing channels bits when all channels are found. ALSA: hda/tas2781: remove unnecessary runtime_pm calls ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models ALSA: aaci: Delete unused variable in aaci_do_suspend ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again ALSA: scarlett2: Fix Scarlett 4th Gen input gain range ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection ALSA: hda/tas2781: restore power state after system_resume ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend ALSA: hda/tas2781: add lock to system_suspend ALSA: hda/tas2781: use dev_dbg in system_resume ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57 ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57 ASoC: cs35l56: Add support for CS35L54 and CS35L57 ASoC: Intel: catpt: Carefully use PCI bitwise constants ALSA: hda: hda_component: Include sound/hda_codec.h ALSA: hda: hda_component: Add missing #include guards ...
2024-03-08platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57Simon Trimmer1-0/+2
Add the ACPI HIDs and smi_node descriptions for the CS35L54 and CS35L57 Boosted Smart Amplifiers. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <20240308135900.603192-4-rf@opensource.cirrus.com>
2024-02-27ACPI: scan: Consolidate Device Check and Bus Check notification handlingRafael J. Wysocki1-19/+25
There is no particular reason why device object subtree rescans in acpi_scan_device_check() and acpi_scan_device_check() should be carried out differently, so move the rescan code into a new function called acpi_scan_rescan_bus() and make both the functions above invoke it. While at it, in the Device Check case, start the device object subtree rescan mentioned above from the target device's parent, as per the specification. [1] Link: https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#device-object-notification-values # [1] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-27ACPI: scan: Rework Device Check and Bus Check notification handlingRafael J. Wysocki1-39/+45
The underlying problem is the handling of the enabled bit in device status (bit 1 of _STA return value) which is required by the ACPI specification to be observed in addition to the present bit (bit 0 of _STA return value) [1], but Linux does not observe it. Since Linux has not looked at that bit for a long time, it is generally risky to start obseving it in all device enumeration cases, especially at the system initialization time, but it can be observed when the kernel receives a Bus Check or Device Check notification indicating a change in device configuration. In those cases, seeing the enabled bit clear may be regarded as an indication that the device at hand should not be used any more. For this reason, rework the handling of Device Check and Bus Check notifications in the ACPI core device enumeration code in the following way: 1. Rename acpi_bus_trim_one() to acpi_scan_check_and_detach() and make it check device status if its second argument is not NULL, in which case it will detach scan handlers or ACPI drivers from devices whose _STA returns the enabled bit clear. 2. Make acpi_scan_device_check() and acpi_scan_bus_check() invoke acpi_scan_check_and_detach() with a non-NULL second argument unconditionally, so scan handlers and ACPI drivers are detached from the target device and its ancestors if their _STA returns the enabled bit clear. Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#sta-device-status # [1] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-27ACPI: scan: Make acpi_processor_add() check the device enabled bitRafael J. Wysocki1-0/+5
Modify acpi_processor_add() return an error if _STA returns the enabled bit clear for the given processor device, so as to avoid using processors that don't decode their resources, as per the ACPI specification. [1] Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#sta-device-status # [1] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-27ACPI: scan: Relocate acpi_bus_trim_one()Rafael J. Wysocki1-26/+26
Relocate acpi_bus_trim_one() (without modifications) so as to avoid the need to add a forward declaration of it in a subsequent patch. No functional changes. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-27ACPI: scan: Fix device check notification handlingRafael J. Wysocki1-6/+2
It is generally invalid to fail a Device Check notification if the scan handler has not been attached to the given device after a bus rescan, because there may be valid reasons for the scan handler to refuse attaching to the device (for example, the device is not ready). For this reason, modify acpi_scan_device_check() to return 0 in that case without printing a warning. While at it, reduce the log level of the "already enumerated" message in the same function, because it is only interesting when debugging notification handling Fixes: 443fc8202272 ("ACPI / hotplug: Rework generic code to handle suprise removals") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-02-12ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC deviceWentong Wu1-0/+1
Inside IVSC, switching ownership requires an interface with two different hardware modules, ACE and CSI. The software interface to these modules is based on Intel MEI framework. Usually mei client devices are dynamically created, so the info of consumers depending on mei client devices is not present in the firmware tables. This causes problems with the probe ordering with respect to drivers for consumers of these MEI client devices. But on these camera sensor devices, the ACPI nodes describing the sensors all have a _DEP dependency on the matching MEI bus ACPI device, so adding IVSC MEI bus ACPI device to acpi_honor_dep_ids allows solving the probe-ordering problem by deferring the enumeration of ACPI-devices which have a _DEP dependency on an IVSC mei bus ACPI device. Add INTC10CF, the HID of IVSC MEI bus ACPI device on MTL platform, to acpi_honor_dep_ids. Signed-off-by: Wentong Wu <wentong.wu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-01-18Merge tag 'iommu-updates-v6.8' of ↵Linus Torvalds1-14/+18
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "Core changes: - Fix race conditions in device probe path - Retire IOMMU bus_ops - Support for passing custom allocators to page table drivers - Clean up Kconfig around IOMMU_SVA - Support for sharing SVA domains with all devices bound to a mm - Firmware data parsing cleanup - Tracing improvements for iommu-dma code - Some smaller fixes and cleanups ARM-SMMU drivers: - Device-tree binding updates: - Add additional compatible strings for Qualcomm SoCs - Document Adreno clocks for Qualcomm's SM8350 SoC - SMMUv2: - Implement support for the ->domain_alloc_paging() callback - Ensure Secure context is restored following suspend of Qualcomm SMMU implementation - SMMUv3: - Disable stalling mode for the "quiet" context descriptor - Minor refactoring and driver cleanups Intel VT-d driver: - Cleanup and refactoring AMD IOMMU driver: - Improve IO TLB invalidation logic - Small cleanups and improvements Rockchip IOMMU driver: - DT binding update to add Rockchip RK3588 Apple DART driver: - Apple M1 USB4/Thunderbolt DART support - Cleanups Virtio IOMMU driver: - Add support for iotlb_sync_map - Enable deferred IO TLB flushes" * tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits) iommu: Don't reserve 0-length IOVA region iommu/vt-d: Move inline helpers to header files iommu/vt-d: Remove unused vcmd interfaces iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through() iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly iommu/sva: Fix memory leak in iommu_sva_bind_device() dt-bindings: iommu: rockchip: Add Rockchip RK3588 iommu/dma: Trace bounce buffer usage when mapping buffers iommu/arm-smmu: Convert to domain_alloc_paging() iommu/arm-smmu: Pass arm_smmu_domain to internal functions iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED iommu/arm-smmu: Convert to a global static identity domain iommu/arm-smmu: Reorganize arm_smmu_domain_add_master() iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent() iommu/arm-smmu-v3: Add a type for the STE iommu/arm-smmu-v3: disable stall for quiet_cd iommu/qcom: restore IOMMU state if needed iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible iommu/arm-smmu-qcom: Add missing GMU entry to match table ...
2024-01-11Merge tag 'dma-mapping-6.8-2024-01-08' of ↵Linus Torvalds1-1/+0
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - reduce area lock contention for non-primary IO TLB pools (Petr Tesarik) - don't store redundant offsets in the dma_ranges stuctures (Robin Murphy) - clear dev->dma_mem when freeing per-device pools (Joakim Zhang) * tag 'dma-mapping-6.8-2024-01-08' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: clear dev->dma_mem to NULL after freeing it swiotlb: reduce area lock contention for non-primary IO TLB pools dma-mapping: don't store redundant offsets
2024-01-09Merge tag 'platform-drivers-x86-v6.8-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - Intel PMC / PMT / TPMI / uncore-freq / vsec improvements and new platform support - AMD PMC / PMF improvements and new platform support - AMD ACPI based Wifi band RFI mitigation feature (WBRF) - WMI bus driver cleanups and improvements (Armin Wolf) - acer-wmi Predator PHN16-71 support - New Silicom network appliance EC LEDs / GPIOs driver * tag 'platform-drivers-x86-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (96 commits) platform/x86/amd/pmc: Modify SMU message port for latest AMD platform platform/x86/amd/pmc: Add 1Ah family series to STB support list platform/x86/amd/pmc: Add idlemask support for 1Ah family platform/x86/amd/pmc: call amd_pmc_get_ip_info() during driver probe platform/x86/amd/pmc: Add VPE information for AMDI000A platform platform/x86/amd/pmc: Send OS_HINT command for AMDI000A platform platform/x86/amd/pmf: Return a status code only as a constant in two functions platform/x86/amd/pmf: Return directly after a failed apmf_if_call() in apmf_sbios_heartbeat_notify() platform/x86: wmi: linux/wmi.h: fix Excess kernel-doc description warning platform/x86/intel/pmc: Add missing extern platform/x86/intel/pmc/lnl: Add GBE LTR ignore during suspend platform/x86/intel/pmc/arl: Add GBE LTR ignore during suspend platform/x86: intel-uncore-freq: Add additional client processors platform/x86: Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS platform/x86: hp-bioscfg: Removed needless asm-generic platform/x86/intel/pmc: Add Lunar Lake M support to intel_pmc_core driver platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driver platform/x86/intel/pmc: Add ssram_init flag in PMC discovery in Meteor Lake platform/x86/intel/pmc: Move common code to core.c platform/x86/intel/pmc: Add PSON residency counter for Alder Lake ...
2024-01-04Merge branch 'acpi-utils'Rafael J. Wysocki1-3/+2
Merge ACPI utility functions updates for 6.8-rc1: - Modify acpi_dev_uid_match() to support different types of its second argument and adjust its users accordingly (Raag Jadav). - Clean up code related to acpi_evaluate_reference() and ACPI device lists (Rafael J. Wysocki). * acpi-utils: ACPI: utils: Introduce helper for _DEP list lookup ACPI: utils: Fix white space in struct acpi_handle_list definition ACPI: utils: Refine acpi_handle_list_equal() slightly ACPI: utils: Return bool from acpi_evaluate_reference() ACPI: utils: Rearrange in acpi_evaluate_reference() perf: arm_cspmu: drop redundant acpi_dev_uid_to_integer() efi: dev-path-parser: use acpi_dev_uid_match() for matching _UID ACPI: LPSS: use acpi_dev_uid_match() for matching _UID ACPI: bus: update acpi_dev_hid_uid_match() to support multiple types ACPI: bus: update acpi_dev_uid_match() to support multiple types
2024-01-04Merge branches 'acpi-scan' and 'acpi-processor'Rafael J. Wysocki1-9/+47
Merge ACPI device enumeration updates and ACPI processor driver updates for 6.8-rc1: - Add CSI-2 and DisCo for Imaging support to the ACPI device enumeration code (Sakari Ailus, Rafael J. Wysocki). - Adjust the cpufreq thermal reduction algorithm in the ACPI processor driver for Tegra241 (Srikar Srimath Tirumala, Arnd Bergmann). - Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki). * acpi-scan: ACPI: scan: Fix an error message in DisCo for Imaging support ACPI: property: Replicate DT-aligned u32 properties from DisCo for Imaging ACPI: property: Dig "rotation" property for devices with CSI2 _CRS ACPI: scan: Extract MIPI DisCo for Imaging data into swnodes device property: Add SOFTWARE_NODE() macro for defining software nodes ACPI: scan: Extract _CRS CSI-2 connection information into swnodes ACPI: scan: Extract CSI-2 connection graph from _CRS ACPI: property: Support using strings in reference properties * acpi-processor: ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg() ACPI: processor: reduce CPUFREQ thermal reduction pctg for Tegra241 ACPI: processor: Provide empty stub of acpi_proc_quirk_mwait_check()
2023-12-15dma-mapping: don't store redundant offsetsRobin Murphy1-1/+0
A bus_dma_region necessarily stores both CPU and DMA base addresses for a range, so there's no need to also store the difference between them. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-12-15ACPI: utils: Return bool from acpi_evaluate_reference()Rafael J. Wysocki1-3/+2
There are only 4 users of acpi_evaluate_reference() and none of them actually cares about the reason why it fails. All of them are only interested in whether or not it is successful, so it can return a bool value indicating that. Modify acpi_evaluate_reference() as per the observation above and update its callers accordingly so as to get rid of useless code and local variables. The observable behavior of the kernel is not expected to change after this modification of the code. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-12-12acpi: Do not return struct iommu_ops from acpi_iommu_configure_id()Jason Gunthorpe1-12/+17
Nothing needs this pointer. Return a normal error code with the usual IOMMU semantic that ENODEV means 'there is no IOMMU driver'. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Moritz Fischer <moritzf@google.com> Tested-by: Hector Martin <marcan@marcan.st> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/6-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-12iommu: Remove struct iommu_ops *iommu from arch_setup_dma_ops()Jason Gunthorpe1-2/+1
This is not being used to pass ops, it is just a way to tell if an iommu driver was probed. These days this can be detected directly via device_iommu_mapped(). Call device_iommu_mapped() in the two places that need to check it and remove the iommu parameter everywhere. Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Hector Martin <marcan@marcan.st> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-11-27iommu: Avoid more races around device probeRobin Murphy1-1/+6
It turns out there are more subtle races beyond just the main part of __iommu_probe_device() itself running in parallel - the dev_iommu_free() on the way out of an unsuccessful probe can still manage to trip up concurrent accesses to a device's fwspec. Thus, extend the scope of iommu_probe_device_lock() to also serialise fwspec creation and initial retrieval. Reported-by: Zhenhua Huang <quic_zhenhuah@quicinc.com> Link: https://lore.kernel.org/linux-iommu/e2e20e1c-6450-4ac5-9804-b0000acdf7de@quicinc.com/ Fixes: 01657bc14a39 ("iommu: Avoid races around device probe") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: André Draszik <andre.draszik@linaro.org> Tested-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/16f433658661d7cadfea51e7c65da95826112a2b.1700071477.git.robin.murphy@arm.com Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-11-20ACPI: scan: Extract MIPI DisCo for Imaging data into swnodesRafael J. Wysocki1-2/+10
Add information extracted from the MIPI DisCo for Imaging device properties to software nodes created during the CSI-2 connection graph discovery. Link: https://www.mipi.org/specifications/mipi-disco-imaging Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2023-11-20ACPI: scan: Extract CSI-2 connection graph from _CRSRafael J. Wysocki1-9/+39
Find ACPI CSI-2 resource descriptors defined since ACPI 6.4 (for CSI-2 and camera configuration) in _CRS for all device objects in the given scope of the ACPI namespace that have them, identify the corresponding "remote endpoint" device objects for them and allocate memory for software nodes needed to create a DT-like data structure representing the CSI-2 connection graph for drivers. The code needed to populate these software nodes will be added by subsequent change sets. Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#camera-serial-interface-csi-2-connection-resource-descriptor Co-developed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2023-11-20ACPI: scan: Add LNXVIDEO HID to ignore_serial_bus_ids[]Hans de Goede1-0/+1
The I2C-core already has filtering to skip i2c_client instantiation for LNXVIDEO acpi_device-s with I2cSerialBus resources, since LNXVIDEO devices are not i2c_client-s and are handled by the acpi_video driver. This filtering was added to i2c-core-acpi.c in commit 3a4991a9864c ("i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices"). Now a similar problem has shown up where the SPI-core is instantiating an unwanted SPI-device for a SpiSerialBus resource under a LNXVIDEO acpi_device. On a Lenovo Yoga Tab 3 YT3-X90F this unwanted SPI-device instanstantiation causes the SPI-device instanstantiation for the WM5102 audio codec to fail with: [ 21.988441] pxa2xx-spi 8086228E:00: chipselect 0 already in use Instead of duplicating the I2C-core filtering in the SPI-core code, push the filtering of SerialBus resources under LNXVIDEO acpi_device-s up into the ACPI-core by adding the LNXVIDEO HID to ignore_serial_bus_ids[]. Note the filtering in the I2C-core i2c_acpi_do_lookup() function is still necessary because this not only impacts i2c_client instantiation but it also makes the I2C-core ignore the I2cSerialBus resource when checking what the maximum speed is the I2C bus supports, which is still necessary. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231104205828.63139-1-hdegoede@redhat.com
2023-10-26Merge branches 'acpi-utils', 'acpi-resource', 'acpi-property' and 'acpi-soc'Rafael J. Wysocki1-0/+1
Merge ACPI utilities updates, ACPI resource management updates, ACPI device properties management updates and ACPI LPSS (Intel SoC) driver update for 6.7-rc1: - Rework acpi_handle_list handling so as to manage it dynamically, including size computation (Rafael Wysocki). - Clean up ACPI utilities code so as to make it follow the kernel coding style (Jonathan Bergh). - Consolidate IRQ trigger-type override DMI tables and drop .ident values from dmi_system_id tables used for ACPI resources management quirks (Hans de Goede). - Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach). - Allow _DSD buffer data only for byte accessors and document the _DSD data buffer GUID (Andy Shevchenko). - Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS driver, because it does not need them (Raag Jadav). * acpi-utils: ACPI: utils: Remove redundant braces around individual statement ACPI: utils: Fix up white space in a few places ACPI: utils: Dynamically determine acpi_handle_list size ACPI: thermal: Merge trip initialization functions ACPI: thermal: Collapse trip devices update function wrappers ACPI: thermal: Collapse trip devices update functions ACPI: thermal: Add device list to struct acpi_thermal_trip ACPI: thermal: Fix a small leak in acpi_thermal_add() ACPI: thermal: Drop valid flag from struct acpi_thermal_trip ACPI: thermal: Drop redundant trip point flags ACPI: thermal: Untangle initialization and updates of active trips ACPI: thermal: Untangle initialization and updates of the passive trip ACPI: thermal: Simplify critical and hot trips representation ACPI: thermal: Create and populate trip points table earlier ACPI: thermal: Determine the number of trip points earlier ACPI: thermal: Fold acpi_thermal_get_info() into its caller ACPI: thermal: Simplify initialization of critical and hot trips * acpi-resource: ACPI: resource: Do IRQ override on TongFang GMxXGxx ACPI: resource: Drop .ident values from dmi_system_id tables ACPI: resource: Consolidate IRQ trigger-type override DMI tables * acpi-property: ACPI: property: Document the _DSD data buffer GUID ACPI: property: Allow _DSD buffer data only for byte accessors * acpi-soc: ACPI: LPSS: drop BayTrail and Lynxpoint pinctrl HIDs
2023-10-24ACPI: scan: Rename acpi_scan_device_not_present() to be about enumerationJames Morse1-4/+4
acpi_scan_device_not_present() is called when a device in the hierarchy is not available for enumeration. Historically enumeration was only based on whether the device was present. To add support for only enumerating devices that are both present and enabled, this helper should be renamed. It was only ever about enumeration, rename it acpi_scan_device_not_enumerated(). No change in behaviour is intended. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Miguel Luis <miguel.luis@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-20ACPI: scan: Use the acpi_device_is_present() helper in more placesJames Morse1-2/+2
acpi_device_is_present() checks the present or functional bits from the cached copy of _STA. A few places open-code this check. Use the helper instead to improve readability. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Miguel Luis <miguel.luis@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-29ACPI: utils: Dynamically determine acpi_handle_list sizeRafael J. Wysocki1-0/+1
Address a long-standing "TBD" comment in the ACPI headers regarding the number of handles in struct acpi_handle_list. The number 10, which along with the comment dates back to 2.4.23, seems like it may have been arbitrarily chosen and isn't sufficient in all cases [1]. Finally change the code to dynamically determine the size of the handles table in struct acpi_handle_list and allocate it accordingly. Update the users of to struct acpi_handle_list to take the additional dynamic allocation into account. Link: https://lore.kernel.org/linux-acpi/20230809094451.15473-1-ivan.hu@canonical.com # [1] Co-developed-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-01Merge tag 'iommu-updates-v6.6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "Core changes: - Consolidate probe_device path - Make the PCI-SAC IOVA allocation trick PCI-only AMD IOMMU: - Consolidate PPR log handling - Interrupt handling improvements - Refcount fixes for amd_iommu_v2 driver Intel VT-d driver: - Enable idxd device DMA with pasid through iommu dma ops - Lift RESV_DIRECT check from VT-d driver to core - Miscellaneous cleanups and fixes ARM-SMMU drivers: - Device-tree binding updates: - Add additional compatible strings for Qualcomm SoCs - Allow ASIDs to be configured in the DT to work around Qualcomm's broken hypervisor - Fix clocks for Qualcomm's MSM8998 SoC - SMMUv2: - Support for Qualcomm's legacy firmware implementation featured on at least MSM8956 and MSM8976 - Match compatible strings for Qualcomm SM6350 and SM6375 SoC variants - SMMUv3: - Use 'ida' instead of a bitmap for VMID allocation - Rockchip IOMMU: - Lift page-table allocation restrictions on newer hardware - Mediatek IOMMU: - Add MT8188 IOMMU Support - Renesas IOMMU: - Allow PCIe devices .. and the usual set of cleanups an smaller fixes" * tag 'iommu-updates-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (64 commits) iommu: Explicitly include correct DT includes iommu/amd: Remove unused declarations iommu/arm-smmu-qcom: Add SM6375 SMMUv2 iommu/arm-smmu-qcom: Add SM6350 DPU compatible iommu/arm-smmu-qcom: Add SM6375 DPU compatible iommu/arm-smmu-qcom: Sort the compatible list alphabetically dt-bindings: arm-smmu: Fix MSM8998 clocks description iommu/vt-d: Remove unused extern declaration dmar_parse_dev_scope() iommu/vt-d: Fix to convert mm pfn to dma pfn iommu/vt-d: Fix to flush cache of PASID directory table iommu/vt-d: Remove rmrr check in domain attaching device path iommu: Prevent RESV_DIRECT devices from blocking domains dmaengine/idxd: Re-enable kernel workqueue under DMA API iommu/vt-d: Add set_dev_pasid callback for dma domain iommu/vt-d: Prepare for set_dev_pasid callback iommu/vt-d: Make prq draining code generic iommu/vt-d: Remove pasid_mutex iommu/vt-d: Add domain_flush_pasid_iotlb() iommu: Move global PASID allocation from SVA to core iommu: Generalize PASID 0 for normal DMA w/o PASID ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 06:35:31 +0000