summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/at91sam9n12.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21ARM: dts: Move .dts files to vendor sub-directoriesRob Herring1-799/+0
The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2023-05-22ARM: dts: at91: at91sam9n12: witch sckc to new clock bindingsClaudiu Beznea1-20/+3
Switch slow clock controller to new clock bindings. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230517094119.2894220-4-claudiu.beznea@microchip.com
2023-05-22ARM: dts: at91: use clock-controller name for PMC nodesClaudiu Beznea1-1/+1
Use clock-controller generic name for PMC nodes. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230517094119.2894220-2-claudiu.beznea@microchip.com
2022-09-16ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodesSergiu Moga1-0/+6
Add the missing required DT property `atmel,usart-mode` to the serial nodes of Atmel/Microchip DT files. Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220913142205.162399-4-sergiu.moga@microchip.com
2022-07-04ARM: dts: at91: use generic name for reset controllerClaudiu Beznea1-1/+1
Use generic name for reset controller of AT91 devices to comply with DT specifications. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220610092414.1816571-2-claudiu.beznea@microchip.com
2020-09-16ARM: dts: at91: add unit-address to memory nodeAlexandre Belloni1-1/+1
The memory node requires a unit-address, add it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200831171129.3886857-7-alexandre.belloni@bootlin.com
2020-09-03ARM: dts: at91: fix sram nodesAlexandre Belloni1-0/+3
The ranges, #address-cells and #size-cells properties are mandatory, add them to the sram nodes. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200831171129.3886857-4-alexandre.belloni@bootlin.com
2020-09-03ARM: dts: at91: fix cpu nodeAlexandre Belloni1-2/+3
The reg property is mandatory for cpu nodes, also fix the #address-cells of the cpus node that has to be at least 1. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20200831171129.3886857-2-alexandre.belloni@bootlin.com
2020-04-13ARM: dts: at91: at91sam9n12: switch to new clock bindingsAlexandre Belloni1-296/+28
Switch at91sam9n12 boards to the new PMC clock bindings. Link: https://lore.kernel.org/r/20200116173510.427403-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4Thomas Gleixner1-2/+1
Based on 1 normalized pattern(s): licensed under gplv2 or later extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 118 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.961286471@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30ARM: dts: Kill off skeleton{64}.dtsiRob Herring1-1/+3
Remove the usage of skeleton.dtsi in the remaining dts files. It was deprecated since commit 9c0da3cc61f1 ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"). This will make adding a unit-address to memory nodes easier. The main tricky part to removing skeleton.dtsi is we could end up with no /memory node at all when a bootloader depends on one being present. I hacked up dtc to check for this condition. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-21ARM: dts: at91: fixes uart pinctrl, set pullup on rx, clear pullup on txPeter Rosin1-2/+2
Remove pullup on uart TX signals, they are push-pull outputs thus pullups are pointless. Add pullup on uart RX signals, they prevent the RX signals to be left floating and so consuming a useless extra amount of power in crowbarred state if nothing is connected to RX. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-12-31ARM: dts: at91: at91sam9n12: TC blocks are also simple-mfd and syscon devicesAlexandre Belloni1-2/+6
Add simple-mfd and syscon to the TC blocks to allow to register one of the channels as clocksource properly at boot time and free up the remaining channels for other use. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-20arm: dts: fix unit-address leading 0sRob Herring1-2/+2
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-05-31ARM: dts: at91: Switch to the new NAND bindingsBoris Brezillon1-25/+7
Use the new EBI/NAND bindings to declare NAND chips and remove old NAND nodes along the way. Note that we keep using old bindings in at91rm9200.dtsi because this SoC is not supported by the EBI driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31ARM: dts: at91: Declare EBI/NAND controllersBoris Brezillon1-0/+42
Declare new nodes for the EBI and NAND controllers embedded in various at91/sama5 SoCs. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-20ARM: dts: at91: fixes dbgu pinctrl, set pullup on rx, clear pullup on txSylvain Rochet1-2/+2
Remove pullup on dbgu DTXD signal, it is a push-pull output thus the pullup is pointless. Add pullup on dbgu DRXD signal, it prevents the DRXD signal to be left floating and so consuming a useless extra amount of power in crowbarred state if nothing is externally connected to dbgu. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15ARM: dts: at91: fix i2c-gpio node nameAlexandre Belloni1-1/+1
i2c-gpio doesn't need a reg property. Change the node names to i2c-gpio-x as used in other dts to remove the unit-address. Solves: Warning (unit_address_vs_reg): Node /i2c@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /i2c@2 has a unit name, but no reg property Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-19ARM: at91/dt: use syscon for PMCAlexandre Belloni1-1/+1
The PMC is not only used to drive the clocks but also has some registers related to other functions. One of those is for example the USB gadget bias. Using a syscon allows to properly separate those functions. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-08-07ARM: at91/dt: add drm support for at91sam9n12ekBo Shen1-0/+71
Add drm support for at91sam9n12ek board. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-08-07ARM: at91/dt: at91sam9n12: use slow clock where necessaryAlexandre Belloni1-4/+8
The watchdog, the reset controller, the RTC, the shutdown controller, the timer counters and the LCD PWM need the slow clock, add it where necessary. The LCD PWM will be handled later. Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-05-22ARM: at91/dt: remove useless usb clockBoris Brezillon1-3/+2
The ohci driver now calls clk_set_rate on the uhpck clock (which forwards set_rate requests to its parent: the usb clock). Remove useless references to usb clocks from ohci definitions. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-04-22Merge tag 'armsoc-dt' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As always, this tends to be one of our bigger branches. There are lots of updates this release, but not that many jumps out as something that needs more detailed coverage. Some of the highlights are: - DTs for the new Annapurna Labs Alpine platform - more graphics DT pieces falling into place on Exynos, bridges, clocks. - plenty of DT updates for Qualcomm platforms for various IP blocks - some churn on Tegra due to switch-over to tool-generated pinctrl data - misc fixes and updates for Atmel at91 platforms - various DT updates to add IP block support on Broadcom's Cygnus platforms - more updates for Renesas platforms as DT support is added for various IP blocks (IPMMU, display, audio, etc)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits) ARM: dts: alpine: add internal pci Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135." ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB ARM: dts: qcom: Add idle state device nodes for 8064 ARM: dts: qcom: Add idle states device nodes for 8084 ARM: dts: qcom: Add idle states device nodes for 8974/8074 ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs devicetree: bindings: Document qcom,idle-states devicetree: bindings: Update qcom,saw2 node bindings dt-bindings: Add #defines for MSM8916 clocks and resets arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974 arm: dts: qcom: Add LCC nodes arm: dts: qcom: Add TCSR support for MSM8960 arm: dts: qcom: Add TCSR support for MSM8660 arm: dts: qcom: Add TCSR support for IPQ8064 ...
2015-03-13ARM: at91/dt: introduce atmel,<chip>-dbguAlexandre Belloni1-1/+1
The DBGU is not a simple UART and we need to be able to distinguish it from the other UARTs, in particular to get its address and check the chip id. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: at91sam9n12: add udp device nodeBo Shen1-0/+9
Add usb device node for at91sam9n12. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: keep watchdog running in idle modeMichel Marti1-1/+0
Since turning on idle-halt in commit fe46aa679f12 (ARM: at91/dt: add sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt no longer reboot if the watchdog times out while the CPU is in idle state. Removing the 'idle-halt' flag that was set by default fixes this. Signed-off-by: Michel Marti <mma@objectxp.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Sylvain Rochet <sylvain.rochet@finsecur.com> [nicolas.ferre@atmel.com: rework the commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91/dt: add SRAM nodesAlexandre Belloni1-0/+5
Add nodes for the SRAM available on atmel SoCs For the at91sam9260 and the at91sam9g20, address mirroring is used to create a single contiguous SRAM range instead of declaring two separate banks. Also remove leftover TODOs in the sam9g45 file Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: correct at91sam9rl sram size => 0x10000] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91/dt: at91sam9n12: Add RTC nodeAlexandre Belloni1-0/+7
Add node for the RTC available on the at91sam9n12. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-19Merge tag 'at91-dt-for-3.17' of ↵Nicolas Ferre1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux Pull AT91 ramc and reset/poweroff related DT patches from Maxim Ripard: "This branch gathers a few devicetree patches needed for the reworks found in the later patches to be sent. More precisely, it holds: - The addition of ddrck for the sama5d3 and the sam9 SoCs - The addition of the shutdown controller node in the sama5d3 DTSI - The slight rework of the ramc bindings for the SoCs that have several RAM controllers" Conflicts: arch/arm/boot/dts/at91sam9g45.dtsi
2014-07-28Merge tag 'v3.16-rc6' into next/dtArnd Bergmann1-1/+1
Update to Linux 3.16-rc6 as a dependency for the broadcom changes. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-18ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsiBoris BREZILLON1-1/+1
udphs_clk (USB Device Controller clock) is referenced instead of uhphs_clk (USB Host Controller clock). Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-15ARM: at91/dt: at91sam9: use ddrck in ramcAlexandre Belloni1-0/+2
Make the ram controller driver take the ddrck clock for at91sam9n12 and at91sam9x5. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09ARM: at91/dt: sam9n12 crystals under the clocks nodeAlexandre Belloni1-9/+11
Having clocks grouped in a subnode is common practice, so move the crystals under a clocks node for the at91sam9n12 SoC and at91sam9n12 based boards. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-25ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT valuesAlexandre Belloni1-2/+2
ICPLL can only take 0 or 1, it got mixed with OUT which can be in the [0-3] range. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-05-22ARM: at91/dt: define sam9n12 clocksBoris BREZILLON1-2/+346
Define sam9n12 clocks and make use of them in peripheral definitions. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Tested-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-10ARM: at91/DT: add NAND + DMA propertyNicolas Ferre1-0/+1
Add the "atmel,nand-has-dma" property to NAND node for SoC that can use the DMA to perform NAND accesses. Use of this property was added in 1b7192658a08f70df0f290634fd7cd2ecb629fc9 (mtd: atmel_nand: add a new dt binding item for nand dma support). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <b.brezillon@overkiz.com>
2014-01-28ARM: at91/dt: add sam9 watchdog default options to SoCsBoris BREZILLON1-0/+5
Set default watchdog options in every SoC compatible with the sam9 watchdog. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-12-19ARM: at91: add PWM device nodeBo Shen1-0/+9
Add PWM device node for AT91 series SoC. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-14ARM: at91: add ssc dma parameter for at91sam9n12Bo Shen1-0/+3
Add ssc dma parameter for at91sam9n12 Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-08-21ARM: at91: at91sam9n12: add pinctrl of TWIvoice1-0/+20
Add pinctrl of TWI for at91sam9n12 SoC. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-06-26Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtArnd Bergmann1-0/+6
From Nicolas Ferre: - more SPI DT activation for rm9200 - SPI DMA for at91sam9n12/sama5d3 And one little fix for SPI compatibility string * tag 'at91-dt' of git://github.com/at91linux/linux-at91: ARM: at91: dt: rm9200ek: add spi support ARM: at91: dt: rm9200: add spi support ARM: at91/DT: at91sam9n12: add SPI DMA client infos ARM: at91/DT: sama5d3: add SPI DMA client infos ARM: at91/DT: fix SPI compatibility string Conflicts: arch/arm/boot/dts/sama5d3.dtsi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-26ARM: at91/DT: at91sam9n12: add SPI DMA client infosNicolas Ferre1-0/+6
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-06-14Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtOlof Johansson1-5/+6
From Nicolas Ferre: Again some nice DT updates for AT91: - DMA binding update with one patch shared with slave-dma tree - more SPI DT activation - enable the USB gadget HS for DT platforms * tag 'at91-dt' of git://github.com/at91linux/linux-at91: ARM: at91: sam9m10g45ek add udc DT support ARM: at91: sam9g45 add udc DT support ARM: at91: sam9x5ek add udc DT support ARM: at91: sam9x5 add udc DT support ARM: at91: dt: at91sam9x5: add SPI DMA client infos ARM: at91: dt: switch DMA DT bindings to pre-processor ARM: at91: dt: add header to define at_hdmac configuration
2013-06-15ARM: at91: dt: switch DMA DT bindings to pre-processorLudovic Desroches1-5/+6
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-06-07Merge branch 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp into next/dtOlof Johansson1-2/+6
From Lorenzo Pieralisi, this is a series of patches that cleans up the CPU nodes in most of the SoC dtsi files to conform to the standard bindings. * 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp: ARM: dts: sunxi: cpus/cpu nodes dts updates ARM: dts: spear: cpus/cpu nodes dts updates ARM: dts: sh7372: cpus/cpu nodes dts updates ARM: dts: r8a7740: cpus/cpu nodes dts updates ARM: dts: pxa2xx: cpus/cpu nodes dts updates ARM: dts: prima2: cpus/cpu node dts updates ARM: dts: picoxcell: cpus/cpu nodes dts updates ARM: dts: omap: cpus/cpu nodes dts updates ARM: dts: lpc32xx: cpus/cpu nodes dts updates ARM: dts: imx: cpus/cpu nodes dts updates ARM: dts: exynos5440: cpus/cpu nodes dts updates ARM: dts: at91: cpus/cpu node dts updates ARM: dts: armada-370-xp: cpus/cpu node dts updates ARM: dts: am33xx: cpus/cpu nodes dts updates Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-01Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtOlof Johansson1-69/+154
From Nicolas Ferre: Big DT-centric update for AT91: - Calao boards update, removal of one board C file and associated defconfig, Kconfig Makefile lines - several Acme boards updates - addition of watchdog, uart and pinctrl descriptions for several products - modification of RTC compatible string for 9x5 family * tag 'at91-dt' of git://github.com/at91linux/linux-at91: (21 commits) ARM: at91/dt: add pinctrl definition for at91 tc blocks ARM: at91/dts: add the watchdog nodes for at91 boards ARM: at91/dtsi: add the watchdog nodes for at91 SoC ARM: at91: drop non DT: Calao USB-A96x ARM: at91: dt: add Calao USB-A9G20 low power version ARM: at91: dt: usb-a9263: add dataflash support ARM: at91: dt: usb-a9263: update shutdown controller ARM: at91: dt: usb-a9260: update shutdown controller ARM: at91: dt: sam9260: add i2c gpio pinctrl ARM: at91: switch Fox G20 board .dts to pre-processor defines ARM: at91: add Acme Systems Fox G20 board ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled ARM: at91/at91sam9x5.dtsi: add UART0/1 nodes ARM: at91/at91-ariag25.dts: add RTC node ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one ARM: at91: udpate defconfigs ARM: at91: dt: switch to standard IRQ flag defines ARM: at91: dt: switch to pinctrl to pre-processor ARM: at91: dt: add pinctrl pre-processor define ARM: at91: dt: switch to standard GPIO flag defines. ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-05-31ARM: at91/dt: add pinctrl definition for at91 tc blocksBoris BREZILLON1-0/+76
This patch adds pinctrl configurations for at91 Timer Counter blocks. These pin definitions can be referenced by "atmel,tcb-pwm" devices to setup pins as PWM output for instance. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> [nicolas.ferre@atmel.com: switch to pinctrl pre-processor macros] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-31ARM: at91/dtsi: add the watchdog nodes for at91 SoCWenyou Yang1-0/+6
at91sam9x5, at91sam9n12 Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-24ARM: at91: at91sam9n12: move external irq declatation to DTJean-Christophe PLAGNIOL-VILLARD1-0/+1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-05-23ARM: dts: at91: cpus/cpu node dts updatesLorenzo Pieralisi1-2/+6
This patch updates the in-kernel dts files according to the latest cpus and cpu bindings updates for ARM. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 18:32:21 +0000