| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI. The one new core feature here
is support for configuring the state of the MOSI pin when the bus is
idle, there are some devices which are very fragile in this regard
even when the chip select signal is not asserted. Otherwise we have
some new driver support, a bunch of small fixes and some general
cleanup work.
- Support for configuring the state of the MOSI pin when the the bus
is idle
- Add the Elgin JG0309-01 in spidev
- Support for Marvell xSPI, Mediatek MTK7981, Microchip PIC64GX, NXP
i.MX8ULP, and Rockchip RK3576 controllers
I also accidentally pulled in an IIO DT bindings update due to a typo
when applying the MOSI idle state patches"
* tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (65 commits)
spi: geni-qcom: Use devm functions to simplify code
spi: remove spi_controller_is_slave() and spi_slave_abort()
platform/olpc: olpc-xo175-ec: switch to use spi_target_abort().
spi: slave-mt27xx: switch to use target_abort
spi: spidev: switch to use spi_target_abort()
spi: slave-system-control: switch to use spi_target_abort()
spi: slave-time: switch to use spi_target_abort()
spi: switch to use spi_controller_is_target()
spi: fspi: add support for imx8ulp
spi: fspi: involve lut_num for struct nxp_fspi_devtype_data
dt-bindings: spi: nxp-fspi: add imx8ulp support
spi: spidev_fdx: Fix the wrong format specifier
spi: mxs: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
spi: dt-bindings: Add rockchip,rk3576-spi compatible
spi: Revert "spi: Insert the missing pci_dev_put()before return"
spi: zynq-qspi: Replace kzalloc with kmalloc for buffer allocation
spi: ppc4xx: Sort headers
spi: ppc4xx: Revert "handle irq_of_parse_and_map() errors"
spi: zynqmp-gqspi: Simplify with dev_err_probe()
spi: zynqmp-gqspi: Use devm_spi_alloc_host()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This release is almost all cleanup work of various kinds, while the
diffstat for the core is quite large this is almost all cleanups and
documentation improvments with some small fixes rather than any new
feature work. We do have support for a couple of new devices but these
are small additions to existing drivers rather than new drivers.
- Removal of the SM5703 driver which does not have it's dependencies
available.
- Support for Allwinner AXP717, and Qualcomm WCN6855.
The Allwinner support shares some commits with the MFD tree"
* tag 'regulator-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (66 commits)
regulator: sm5703: Remove because it is unused and fails to build
regulator: Split up _regulator_get()
regulator: update some comments ([gs]et_voltage_vsel vs [gs]et_voltage_sel)
regulator: max8973: Use irq_get_trigger_type() helper
regulator: core: fix the broken behavior of regulator_dev_lookup()
regulator: max77650: Use container_of and constify static data
regulator: hi6421v530: Use container_of and constify static data
regulator: hi6421v530: Drop unused 'eco_microamp'
regulator: qcom-refgen: Constify static data
regulator: pfuze100: Constify static data
regulator: pcap: Constify static data
regulator: mtk-dvfsrc: Constify static data
regulator: max77826: Constify static data
regulator: max77826: Drop unused 'rdesc' in 'struct max77826_regulator_info'
regulator: tps65023: Constify static data
regulator: hi6421v600: Constify static data
regulator: hi6421: Constify static data
regulator: da9121: Constify static data
regulator: da9063: Constify static data
regulator: da9055: Constify static data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"The main update here is Matti's work allowing regmap irqdomains to be
given custom names (allowing multiple interrupt controllers associatd
with a single struct device), this pulls in some commits from Thomas'
tree which it depends on.
Otherwise there's a bit of work on improving handling of regmaps
protected with spinlocks when used with complex cache types, fixing
some valid but harmless lockdep reports seen with some new driver
work"
* tag 'regmap-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Add coverage of spinlocked regmaps
regcache: use map->alloc_flags also for allocating cache
regmap: Use locking during kunit tests
regmap: Hold the regmap lock when allocating and freeing the cache
regmap: Allow setting IRQ domain name suffix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
"This is the "last" part of the support for the new nbcon consoles.
Where "nbcon" stays for "No Big console lock CONsoles" aka not under
the console_lock.
New callbacks are added to struct console:
- write_thread() for flushing nbcon consoles in task context.
- write_atomic() for flushing nbcon consoles in atomic context,
including NMI.
- con->device_lock() and device_unlock() for taking the driver
specific lock, for example, port->lock.
New printk-specific kthreads are created:
- per-console kthreads which get responsible for flushing normal
priority messages on nbcon consoles.
- thread which gets responsible for flushing normal priority messages
on all consoles when CONFIG_RT enabled.
The new callbacks are called under a special per-console lock which
has already been added back in v6.7. It allows to distinguish three
severities: normal, emergency, and panic. A context with a higher
priority could take over the ownership when it is safe even in the
middle of handling a record. The panic context could do it even when
it is not safe. But it is allowed only for the final desperate flush
before entering the infinite loop.
The new lock helps to flush the messages directly in emergency and
panic contexts. But it is not enough in all situations:
- console_lock() is still need for synchronization against boot
consoles.
- con->device_lock() is need for synchronization against other
operations on the same HW, e.g. serial port speed setting,
non-printk related read/write.
The dependency on con->device_lock() is mutual. Any code taking the
driver specific lock has to acquire the related nbcon console context
as well. For example, see the new uart_port_lock() API. It provides
the necessary synchronization against emergency and panic contexts
where the messages are flushed only under the new per-console lock.
Maybe surprisingly, a quite tricky part is the decision how to flush
the consoles in various situations. It has to take into account:
- message priority: normal, emergency, panic
- scheduling context: task, atomic, deferred_legacy
- registered consoles: boot, legacy, nbcon
- threads are running: early boot, suspend, shutdown, panic
- caller: printk(), pr_flush(), printk_flush_in_panic(),
console_unlock(), console_start(), ...
The primary decision is made in printk_get_console_flush_type(). It
creates a hint what the caller should do:
- flush nbcon consoles directly or via the kthread
- call the legacy loop (console_unlock()) directly or via irq_work
The existing behavior is preserved for the legacy consoles. The only
exception is that they are not longer flushed directly from printk()
in panic() before CPUs are stopped. But this blocking happens only
when at least one nbcon console is registered. The motivation is to
increase a chance to produce the crash dump. They legacy consoles
might create a deadlock in compare with nbcon consoles. The nbcon
console should allow to see the messages even when the crash dump
fails.
There are three possible ways how nbcon consoles are flushed:
- The per-nbcon-console kthread is responsible for flushing messages
added with the normal priority. This is the default mode.
- The legacy loop, aka console_unlock(), is used when there is still
a boot console registered. There is no easy way how to match an
early console driver with a nbcon console driver. And the
console_lock() provides the only reliable serialization at the
moment.
The legacy loop uses either con->write_atomic() or
con->write_thread() callbacks depending on whether it is allowed to
schedule. The atomic variant has to be used from printk().
- In other situations, the messages are flushed directly using
write_atomic() which can be called in any context, including NMI.
It is primary needed during early boot or shutdown, in emergency
situations, and panic.
The emergency priority is used by a code called within
nbcon_cpu_emergency_enter()/exit(). At the moment, it is used in four
situations: WARN(), Oops, lockdep, and RCU stall reports.
Finally, there is no nbcon console at the moment. It means that the
changes should _not_ modify the existing behavior. The only exception
is CONFIG_RT which would force offloading the legacy loop, for normal
priority context, into the dedicated kthread"
* tag 'printk-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (54 commits)
printk: Avoid false positive lockdep report for legacy printing
printk: nbcon: Assign nice -20 for printing threads
printk: Implement legacy printer kthread for PREEMPT_RT
tty: sysfs: Add nbcon support for 'active'
proc: Add nbcon support for /proc/consoles
proc: consoles: Add notation to c_start/c_stop
printk: nbcon: Show replay message on takeover
printk: Provide helper for message prepending
printk: nbcon: Rely on kthreads for normal operation
printk: nbcon: Use thread callback if in task context for legacy
printk: nbcon: Relocate nbcon_atomic_emit_one()
printk: nbcon: Introduce printer kthreads
printk: nbcon: Init @nbcon_seq to highest possible
printk: nbcon: Add context to usable() and emit()
printk: Flush console on unregister_console()
printk: Fail pr_flush() if before SYSTEM_SCHEDULING
printk: nbcon: Add function for printers to reacquire ownership
printk: nbcon: Use raw_cpu_ptr() instead of open coding
printk: Use the BITS_PER_LONG macro
lockdep: Mark emergency sections in lockdep splats
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects updates from Thomas Gleixner:
- Use the threshold to check for the pool refill condition and not the
run time recorded all time low fill value, which is lower than the
threshold and therefore causes refills to be delayed.
- KCSAN annotation updates and simplification of the fill_pool() code.
* tag 'core-debugobjects-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Remove redundant checks in fill_pool()
debugobjects: Fix conditions in fill_pool()
debugobjects: Fix the compilation attributes of some global variables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource watchdog updates from Thomas Gleixner:
- Make the uncertainty margin handling more robust to prevent false
positives
- Clarify comments
* tag 'timers-clocksource-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Set cs_watchdog_read() checks based on .uncertainty_margin
clocksource: Fix comments on WATCHDOG_THRESHOLD & WATCHDOG_MAX_SKEW
clocksource: Improve comments for watchdog skew bounds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
- Prepare the core for supporting parallel hotplug on loongarch
- A small set of cleanups and enhancements
* tag 'smp-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Mark smp_prepare_boot_cpu() __init
cpu: Fix W=1 build kernel-doc warning
cpu/hotplug: Provide weak fallback for arch_cpuhp_init_parallel_bringup()
cpu/hotplug: Make HOTPLUG_PARALLEL independent of HOTPLUG_SMT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Move the LSM framework to static calls
This transitions the vast majority of the LSM callbacks into static
calls. Those callbacks which haven't been converted were left as-is
due to the general ugliness of the changes required to support the
static call conversion; we can revisit those callbacks at a future
date.
- Add the Integrity Policy Enforcement (IPE) LSM
This adds a new LSM, Integrity Policy Enforcement (IPE). There is
plenty of documentation about IPE in this patches, so I'll refrain
from going into too much detail here, but the basic motivation behind
IPE is to provide a mechanism such that administrators can restrict
execution to only those binaries which come from integrity protected
storage, e.g. a dm-verity protected filesystem. You will notice that
IPE requires additional LSM hooks in the initramfs, dm-verity, and
fs-verity code, with the associated patches carrying ACK/review tags
from the associated maintainers. We couldn't find an obvious
maintainer for the initramfs code, but the IPE patchset has been
widely posted over several years.
Both Deven Bowers and Fan Wu have contributed to IPE's development
over the past several years, with Fan Wu agreeing to serve as the IPE
maintainer moving forward. Once IPE is accepted into your tree, I'll
start working with Fan to ensure he has the necessary accounts, keys,
etc. so that he can start submitting IPE pull requests to you
directly during the next merge window.
- Move the lifecycle management of the LSM blobs to the LSM framework
Management of the LSM blobs (the LSM state buffers attached to
various kernel structs, typically via a void pointer named "security"
or similar) has been mixed, some blobs were allocated/managed by
individual LSMs, others were managed by the LSM framework itself.
Starting with this pull we move management of all the LSM blobs,
minus the XFRM blob, into the framework itself, improving consistency
across LSMs, and reducing the amount of duplicated code across LSMs.
Due to some additional work required to migrate the XFRM blob, it has
been left as a todo item for a later date; from a practical
standpoint this omission should have little impact as only SELinux
provides a XFRM LSM implementation.
- Fix problems with the LSM's handling of F_SETOWN
The LSM hook for the fcntl(F_SETOWN) operation had a couple of
problems: it was racy with itself, and it was disconnected from the
associated DAC related logic in such a way that the LSM state could
be updated in cases where the DAC state would not. We fix both of
these problems by moving the security_file_set_fowner() hook into the
same section of code where the DAC attributes are updated. Not only
does this resolve the DAC/LSM synchronization issue, but as that code
block is protected by a lock, it also resolve the race condition.
- Fix potential problems with the security_inode_free() LSM hook
Due to use of RCU to protect inodes and the placement of the LSM hook
associated with freeing the inode, there is a bit of a challenge when
it comes to managing any LSM state associated with an inode. The VFS
folks are not open to relocating the LSM hook so we have to get
creative when it comes to releasing an inode's LSM state.
Traditionally we have used a single LSM callback within the hook that
is triggered when the inode is "marked for death", but not actually
released due to RCU.
Unfortunately, this causes problems for LSMs which want to take an
action when the inode's associated LSM state is actually released; so
we add an additional LSM callback, inode_free_security_rcu(), that is
called when the inode's LSM state is released in the RCU free
callback.
- Refactor two LSM hooks to better fit the LSM return value patterns
The vast majority of the LSM hooks follow the "return 0 on success,
negative values on failure" pattern, however, there are a small
handful that have unique return value behaviors which has caused
confusion in the past and makes it difficult for the BPF verifier to
properly vet BPF LSM programs. This includes patches to
convert two of these"special" LSM hooks to the common 0/-ERRNO pattern.
- Various cleanups and improvements
A handful of patches to remove redundant code, better leverage the
IS_ERR_OR_NULL() helper, add missing "static" markings, and do some
minor style fixups.
* tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (40 commits)
security: Update file_set_fowner documentation
fs: Fix file_set_fowner LSM hook inconsistencies
lsm: Use IS_ERR_OR_NULL() helper function
lsm: remove LSM_COUNT and LSM_CONFIG_COUNT
ipe: Remove duplicated include in ipe.c
lsm: replace indirect LSM hook calls with static calls
lsm: count the LSMs enabled at compile time
kernel: Add helper macros for loop unrolling
init/main.c: Initialize early LSMs after arch code, static keys and calls.
MAINTAINERS: add IPE entry with Fan Wu as maintainer
documentation: add IPE documentation
ipe: kunit test for parser
scripts: add boot policy generation program
ipe: enable support for fs-verity as a trust provider
fsverity: expose verified fsverity built-in signatures to LSMs
lsm: add security_inode_setintegrity() hook
ipe: add support for dm-verity as a trust provider
dm-verity: expose root hash digest and signature data to LSMs
block,lsm: add LSM blob and new LSM hooks for block devices
ipe: add permissive toggle
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Ensure that both IPv4 and IPv6 connections are properly initialized
While we always properly initialized IPv4 connections early in their
life, we missed the necessary IPv6 change when we were adding IPv6
support.
- Annotate the SELinux inode revalidation function to quiet KCSAN
KCSAN correctly identifies a race in __inode_security_revalidate()
when we check to see if an inode's SELinux has been properly
initialized. While KCSAN is correct, it is an intentional choice made
for performance reasons; if necessary, we check the state a second
time, this time with a lock held, before initializing the inode's
state.
- Code cleanups, simplification, etc.
A handful of individual patches to simplify some SELinux kernel
logic, improve return code granularity via ERR_PTR(), follow the
guidance on using KMEM_CACHE(), and correct some minor style
problems.
* tag 'selinux-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix style problems in security/selinux/include/audit.h
selinux: simplify avc_xperms_audit_required()
selinux: mark both IPv4 and IPv6 accepted connection sockets as labeled
selinux: replace kmem_cache_create() with KMEM_CACHE()
selinux: annotate false positive data race to avoid KCSAN warnings
selinux: refactor code to return ERR_PTR in selinux_netlbl_sock_genattr
selinux: Streamline type determination in security_compute_sid
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
- Fix some remaining problems with PID/TGID reporting
When most users think about PIDs, what they are really thinking about
is the TGID. This commit shifts the audit PID logging and filtering
to use the TGID value which should provide a more meaningful audit
stream and filtering experience for users.
- Migrate to the str_enabled_disabled() helper
Evidently we have helper functions that help ensure if we mistype
"enabled" or "disabled" it is now caught at compile time. I guess
we're fancy now.
* tag 'audit-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: Make use of str_enabled_disabled() helper
audit: use task_tgid_nr() instead of task_pid_nr()
|
|
Fix an upstream merge resolution issue[1]. The NETFS_SREQ_HIT_EOF flag,
and code to set it, got added via two different paths. The original path
saw it added in the netfslib read improvements[2], but it was also added,
and slightly differently, in a fix that was committed before v6.11:
1da29f2c39b67b846b74205c81bf0ccd96d34727
netfs, cifs: Fix handling of short DIO read
However, the code added to smb2_readv_callback() to set the flag in didn't
get removed when the netfs read improvements series was rebased to take
account of the cifs fixes. The proposed merge resolution[2] deleted it
rather than rebase the patches.
Fix this by removing the redundant lines. Code to set the bit that derives
from the fix patch is still there, a few lines above in the source.
Fixes: 35219bc5c71f ("Merge tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/CAHk-=wjr8fxk20-wx=63mZruW1LTvBvAKya1GQ1EhyzXb-okMA@mail.gmail.com/ [1]
Link: https://lore.kernel.org/linux-fsdevel/20240913-vfs-netfs-39ef6f974061@brauner/ [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix an upstream merge resolution issue[1]. Prior to the netfs read
healpers, the SMB1 asynchronous read callback, cifs_readv_worker()
performed the cleanup for the operation in the network message processing
loop, potentially slowing down the processing of incoming SMB messages.
With commit a68c74865f51 ("cifs: Fix SMB1 readv/writev callback in the same
way as SMB2/3"), this was moved to a worker thread (as is done in the
SMB2/3 transport variant). However, the "was_async" argument to
netfs_subreq_terminated (which was originally incorrectly "false" got
flipped to "true" - which was then incorrect because, being in a kernel
thread, it's not in an async context).
This got corrected in the sample merge[2], but Linus, not unreasonably,
switched it back to its previous value.
Note that this value tells netfslib whether or not it can run sleepable
stuff or stuff that takes a long time, such as retries and cleanups, in the
calling thread, or whether it should offload to a worker thread.
Fix this so that it is "false". The callback to netfslib in both SMB1 and
SMB2/3 now gets offloaded from the network message thread to a separate
worker thread and thus it's fine to do the slow work in this thread.
Fixes: 35219bc5c71f ("Merge tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/CAHk-=wjr8fxk20-wx=63mZruW1LTvBvAKya1GQ1EhyzXb-okMA@mail.gmail.com/ [1]
Link: https://lore.kernel.org/linux-fsdevel/20240913-vfs-netfs-39ef6f974061@brauner/ [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull io_uring async discard support from Jens Axboe:
"Sitting on top of both the 6.12 block and io_uring core branches,
here's support for async discard through io_uring.
This allows applications to issue async discards, rather than rely on
the blocking sync ioctl discards we already have. The sync support is
difficult to use outside of idle/cleanup periods.
On a real (but slow) device, testing shows the following results when
compared to sync discard:
qd64 sync discard: 21K IOPS, lat avg 3 msec (max 21 msec)
qd64 async discard: 76K IOPS, lat avg 845 usec (max 2.2 msec)
qd64 sync discard: 14K IOPS, lat avg 5 msec (max 25 msec)
qd64 async discard: 56K IOPS, lat avg 1153 usec (max 3.6 msec)
and synthetic null_blk testing with the same queue depth and block
size settings as above shows:
Type Trim size IOPS Lat avg (usec) Lat Max (usec)
==============================================================
sync 4k 144K 444 20314
async 4k 1353K 47 595
sync 1M 56K 1136 21031
async 1M 94K 680 760"
* tag 'for-6.12/io_uring-discard-20240913' of git://git.kernel.dk/linux:
block: implement async io_uring discard cmd
block: introduce blk_validate_byte_range()
filemap: introduce filemap_invalidate_pages
io_uring/cmd: give inline space in request to cmds
io_uring/cmd: expose iowq to cmds
|
|
Pull block updates from Jens Axboe:
- MD changes via Song:
- md-bitmap refactoring (Yu Kuai)
- raid5 performance optimization (Artur Paszkiewicz)
- Other small fixes (Yu Kuai, Chen Ni)
- Add a sysfs entry 'new_level' (Xiao Ni)
- Improve information reported in /proc/mdstat (Mateusz Kusiak)
- NVMe changes via Keith:
- Asynchronous namespace scanning (Stuart)
- TCP TLS updates (Hannes)
- RDMA queue controller validation (Niklas)
- Align field names to the spec (Anuj)
- Metadata support validation (Puranjay)
- A syntax cleanup (Shen)
- Fix a Kconfig linking error (Arnd)
- New queue-depth quirk (Keith)
- Add missing unplug trace event (Keith)
- blk-iocost fixes (Colin, Konstantin)
- t10-pi modular removal and fixes (Alexey)
- Fix for potential BLKSECDISCARD overflow (Alexey)
- bio splitting cleanups and fixes (Christoph)
- Deal with folios rather than rather than pages, speeding up how the
block layer handles bigger IOs (Kundan)
- Use spinlocks rather than bit spinlocks in zram (Sebastian, Mike)
- Reduce zoned device overhead in ublk (Ming)
- Add and use sendpages_ok() for drbd and nvme-tcp (Ofir)
- Fix regression in partition error pointer checking (Riyan)
- Add support for write zeroes and rotational status in nbd (Wouter)
- Add Yu Kuai as new BFQ maintainer. The scheduler has been
unmaintained for quite a while.
- Various sets of fixes for BFQ (Yu Kuai)
- Misc fixes and cleanups (Alvaro, Christophe, Li, Md Haris, Mikhail,
Yang)
* tag 'for-6.12/block-20240913' of git://git.kernel.dk/linux: (120 commits)
nvme-pci: qdepth 1 quirk
block: fix potential invalid pointer dereference in blk_add_partition
blk_iocost: make read-only static array vrate_adj_pct const
block: unpin user pages belonging to a folio at once
mm: release number of pages of a folio
block: introduce folio awareness and add a bigger size from folio
block: Added folio-ized version of bio_add_hw_page()
block, bfq: factor out a helper to split bfqq in bfq_init_rq()
block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()
block, bfq: remove local variable 'split' in bfq_init_rq()
block, bfq: remove bfq_log_bfqg()
block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()
block, bfq: fix procress reference leakage for bfqq in merge chain
block, bfq: fix uaf for accessing waker_bfqq after splitting
blk-throttle: support prioritized processing of metadata
blk-throttle: remove last_low_overflow_time
drbd: Add NULL check for net_conf to prevent dereference in state validation
nvme-tcp: fix link failure for TCP auth
blk-mq: add missing unplug trace event
mtip32xx: Remove redundant null pointer checks in mtip_hw_debugfs_init()
...
|
|
Pull io_uring updates from Jens Axboe:
- NAPI fixes and cleanups (Pavel, Olivier)
- Add support for absolute timeouts (Pavel)
- Fixes for io-wq/sqpoll affinities (Felix)
- Efficiency improvements for dealing with huge pages (Chenliang)
- Support for a minwait mode, where the application essentially has two
timouts - one smaller one that defines the batch timeout, and the
overall large one similar to what we had before. This enables
efficient use of batching based on count + timeout, while still
working well with periods of less intensive workloads
- Use ITER_UBUF for single segment sends
- Add support for incremental buffer consumption. Right now each
operation will always consume a full buffer. With incremental
consumption, a recv/read operation only consumes the part of the
buffer that it needs to satisfy the operation
- Add support for GCOV for io_uring, to help retain a high coverage of
test to code ratio
- Fix regression with ocfs2, where an odd -EOPNOTSUPP wasn't correctly
converted to a blocking retry
- Add support for cloning registered buffers from one ring to another
- Misc cleanups (Anuj, me)
* tag 'for-6.12/io_uring-20240913' of git://git.kernel.dk/linux: (35 commits)
io_uring: add IORING_REGISTER_COPY_BUFFERS method
io_uring/register: provide helper to get io_ring_ctx from 'fd'
io_uring/rsrc: add reference count to struct io_mapped_ubuf
io_uring/rsrc: clear 'slot' entry upfront
io_uring/io-wq: inherit cpuset of cgroup in io worker
io_uring/io-wq: do not allow pinning outside of cpuset
io_uring/rw: drop -EOPNOTSUPP check in __io_complete_rw_common()
io_uring/rw: treat -EOPNOTSUPP for IOCB_NOWAIT like -EAGAIN
io_uring/sqpoll: do not allow pinning outside of cpuset
io_uring/eventfd: move refs to refcount_t
io_uring: remove unused rsrc_put_fn
io_uring: add new line after variable declaration
io_uring: add GCOV_PROFILE_URING Kconfig option
io_uring/kbuf: add support for incremental buffer consumption
io_uring/kbuf: pass in 'len' argument for buffer commit
Revert "io_uring: Require zeroed sqe->len on provided-buffers send"
io_uring/kbuf: move io_ring_head_to_buf() to kbuf.h
io_uring/kbuf: add io_kbuf_commit() helper
io_uring/kbuf: shrink nr_iovs/mode in struct buf_sel_arg
io_uring: wire up min batch wake timeout
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, we add file-backed mount support, which has has been a
strong requirement for years. It is especially useful when there are
thousands of images running on the same host for containers and other
sandbox use cases, unlike OS image use cases.
Without file-backed mounts, it's hard for container runtimes to manage
and isolate so many unnecessary virtual block devices safely and
efficiently, therefore file-backed mounts are highly preferred. For
EROFS users, ComposeFS [1], containerd, and Android APEXes [2] will
directly benefit from it, and I've seen no risk in implementing it as
a completely immutable filesystem.
The previous experimental feature "EROFS over fscache" is now marked
as deprecated because:
- Fscache is no longer an independent subsystem and has been merged
into netfs, which was somewhat unexpected when it was proposed.
- New HSM "fanotify pre-content hooks" [3] will be landed upstream.
These hooks will replace "EROFS over fscache" in a simpler way, as
EROFS won't be bother with kernel caching anymore. Userspace
programs can also manage their own caching hierarchy more flexibly.
Once the HSM "fanotify pre-content hooks" is landed, I will remove the
fscache backend entirely as an internal dependency cleanup. More
backgrounds are listed in the original patchset [4].
In addition to that, there are bugfixes and cleanups as usual.
Summary:
- Support file-backed mounts for containers and sandboxes
- Mark the experimental fscache backend as deprecated
- Handle overlapped pclusters caused by crafted images properly
- Fix a failure path which could cause infinite loops in
z_erofs_init_decompressor()
- Get rid of unnecessary NOFAILs
- Harmless on-disk hardening & minor cleanups"
* tag 'erofs-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: reject inodes with negative i_size
erofs: restrict pcluster size limitations
erofs: allocate more short-lived pages from reserved pool first
erofs: sunset unneeded NOFAILs
erofs: simplify erofs_map_blocks_flatmode()
erofs: refactor read_inode calling convention
erofs: use kmemdup_nul in erofs_fill_symlink
erofs: mark experimental fscache backend deprecated
erofs: support compressed inodes for fileio
erofs: support unencoded inodes for fileio
erofs: add file-backed mount support
erofs: handle overlapped pclusters out of crafted images properly
erofs: fix error handling in z_erofs_init_decompressor
erofs: clean up erofs_register_sysfs()
erofs: fix incorrect symlink detection in fast symlink
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This brings mostly refactoring, cleanups, minor performance
optimizations and usual fixes. The folio API conversions are most
noticeable.
There's one less visible change that could have a high impact. The
extent lock scope for read is reduced, not held for the entire
operation. In the buffered read case it's left to page or inode lock,
some direct io read synchronization is still needed.
This used to prevent deadlocks induced by page faults during direct
io, so there was a 4K limitation on the requests, e.g. for io_uring.
In the future this will allow smoother integration with iomap where
the extent read lock was a major obstacle.
User visible changes:
- the FSTRIM ioctl updates the processed range even after an error or
interruption
- cleaner thread is woken up in SYNC ioctl instead of waking the
transaction thread that can take some delay before waking up the
cleaner, this can speed up cleaning of deleted subvolumes
- print an error message when opening a device fail, e.g. when it's
unexpectedly read-only
Core changes:
- improved extent map handling in various ways (locking, iteration, ...)
- new assertions and locking annotations
- raid-stripe-tree locking fixes
- use xarray for tracking dirty qgroup extents, switched from rb-tree
- turn the subpage test to compile-time condition if possible (e.g.
on x86_64 with 4K pages), this allows to skip a lot of ifs and
remove dead code
- more preparatory work for compression in subpage mode
Cleanups and refactoring
- folio API conversions, many simple cases where page is passed so
switch it to folios
- more subpage code refactoring, update page state bitmap processing
- introduce auto free for btrfs_path structure, use for the simple
cases"
* tag 'for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (110 commits)
btrfs: only unlock the to-be-submitted ranges inside a folio
btrfs: merge btrfs_folio_unlock_writer() into btrfs_folio_end_writer_lock()
btrfs: BTRFS_PATH_AUTO_FREE in orphan.c
btrfs: use btrfs_path auto free in zoned.c
btrfs: DEFINE_FREE for struct btrfs_path
btrfs: remove btrfs_folio_end_all_writers()
btrfs: constify more pointer parameters
btrfs: rework BTRFS_I as macro to preserve parameter const
btrfs: add and use helper to verify the calling task has locked the inode
btrfs: always update fstrim_range on failure in FITRIM ioctl
btrfs: convert copy_inline_to_page() to use folio
btrfs: convert btrfs_decompress() to take a folio
btrfs: convert zstd_decompress() to take a folio
btrfs: convert lzo_decompress() to take a folio
btrfs: convert zlib_decompress() to take a folio
btrfs: convert try_release_extent_mapping() to take a folio
btrfs: convert try_release_extent_state() to take a folio
btrfs: convert submit_eb_page() to take a folio
btrfs: convert submit_eb_subpage() to take a folio
btrfs: convert read_key_bytes() to take a folio
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull affs updates from David Sterba:
"Cleanups removing unused code and updating the definition of a
flexible struct array"
* tag 'affs-for-6.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: Replace one-element array with flexible-array member
affs: Remove unused macros GET_END_PTR, AFFS_GET_HASHENTRY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This contains the work to improve read/write performance for the new
netfs library.
The main performance enhancing changes are:
- Define a structure, struct folio_queue, and a new iterator type,
ITER_FOLIOQ, to hold a buffer as a replacement for ITER_XARRAY. See
that patch for questions about naming and form.
ITER_FOLIOQ is provided as a replacement for ITER_XARRAY. The
problem with an xarray is that accessing it requires the use of a
lock (typically the RCU read lock) - and this means that we can't
supply iterate_and_advance() with a step function that might sleep
(crypto for example) without having to drop the lock between pages.
ITER_FOLIOQ is the iterator for a chain of folio_queue structs,
where each folio_queue holds a small list of folios. A folio_queue
struct is a simpler structure than xarray and is not subject to
concurrent manipulation by the VM. folio_queue is used rather than
a bvec[] as it can form lists of indefinite size, adding to one end
and removing from the other on the fly.
- Provide a copy_folio_from_iter() wrapper.
- Make cifs RDMA support ITER_FOLIOQ.
- Use folio queues in the write-side helpers instead of xarrays.
- Add a function to reset the iterator in a subrequest.
- Simplify the write-side helpers to use sheaves to skip gaps rather
than trying to work out where gaps are.
- In afs, make the read subrequests asynchronous, putting them into
work items to allow the next patch to do progressive
unlocking/reading.
- Overhaul the read-side helpers to improve performance.
- Fix the caching of a partial block at the end of a file.
- Allow a store to be cancelled.
Then some changes for cifs to make it use folio queues instead of
xarrays for crypto bufferage:
- Use raw iteration functions rather than manually coding iteration
when hashing data.
- Switch to using folio_queue for crypto buffers.
- Remove the xarray bits.
Make some adjustments to the /proc/fs/netfs/stats file such that:
- All the netfs stats lines begin 'Netfs:' but change this to
something a bit more useful.
- Add a couple of stats counters to track the numbers of skips and
waits on the per-inode writeback serialisation lock to make it
easier to check for this as a source of performance loss.
Miscellaneous work:
- Ensure that the sb_writers lock is taken around
vfs_{set,remove}xattr() in the cachefiles code.
- Reduce the number of conditional branches in netfs_perform_write().
- Move the CIFS_INO_MODIFIED_ATTR flag to the netfs_inode struct and
remove cifs_post_modify().
- Move the max_len/max_nr_segs members from netfs_io_subrequest to
netfs_io_request as they're only needed for one subreq at a time.
- Add an 'unknown' source value for tracing purposes.
- Remove NETFS_COPY_TO_CACHE as it's no longer used.
- Set the request work function up front at allocation time.
- Use bh-disabling spinlocks for rreq->lock as cachefiles completion
may be run from block-filesystem DIO completion in softirq context.
- Remove fs/netfs/io.c"
* tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
docs: filesystems: corrected grammar of netfs page
cifs: Don't support ITER_XARRAY
cifs: Switch crypto buffer to use a folio_queue rather than an xarray
cifs: Use iterate_and_advance*() routines directly for hashing
netfs: Cancel dirty folios that have no storage destination
cachefiles, netfs: Fix write to partial block at EOF
netfs: Remove fs/netfs/io.c
netfs: Speed up buffered reading
afs: Make read subreqs async
netfs: Simplify the writeback code
netfs: Provide an iterator-reset function
netfs: Use new folio_queue data type and iterator instead of xarray iter
cifs: Provide the capability to extract from ITER_FOLIOQ to RDMA SGEs
iov_iter: Provide copy_folio_from_iter()
mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios
netfs: Use bh-disabling spinlocks for rreq->lock
netfs: Set the request work function upon allocation
netfs: Remove NETFS_COPY_TO_CACHE
netfs: Reserve netfs_sreq_source 0 as unset/unknown
netfs: Move max_len/max_nr_segs from netfs_io_subrequest to netfs_io_stream
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"Recently, we added the ability to list mounts in other mount
namespaces and the ability to retrieve namespace file descriptors
without having to go through procfs by deriving them from pidfds.
This extends nsfs in two ways:
(1) Add the ability to retrieve information about a mount namespace
via NS_MNT_GET_INFO.
This will return the mount namespace id and the number of mounts
currently in the mount namespace. The number of mounts can be
used to size the buffer that needs to be used for listmount() and
is in general useful without having to actually iterate through
all the mounts.
The structure is extensible.
(2) Add the ability to iterate through all mount namespaces over
which the caller holds privilege returning the file descriptor
for the next or previous mount namespace.
To retrieve a mount namespace the caller must be privileged wrt
to it's owning user namespace. This means that PID 1 on the host
can list all mounts in all mount namespaces or that a container
can list all mounts of its nested containers.
Optionally pass a structure for NS_MNT_GET_INFO with
NS_MNT_GET_{PREV,NEXT} to retrieve information about the mount
namespace in one go.
(1) and (2) can be implemented for other namespace types easily.
Together with recent api additions this means one can iterate through
all mounts in all mount namespaces without ever touching procfs.
The commit message in 49224a345c48 ('Merge patch series "nsfs: iterate
through mount namespaces"') contains example code how to do this"
* tag 'vfs-6.12.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nsfs: iterate through mount namespaces
file: add fput() cleanup helper
fs: add put_mnt_ns() cleanup helper
fs: allow mount namespace fd
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull procfs updates from Christian Brauner:
"This contains the following changes for procfs:
- Add config options and parameters to block forcing memory writes.
This adds a Kconfig option and boot param to allow removing the
FOLL_FORCE flag from /proc/<pid>/mem write calls as this can be
used in various attacks.
The traditional forcing behavior is kept as default because it can
break GDB and some other use cases.
This is the simpler version that you had requested.
- Restrict overmounting of ephemeral entities.
It is currently possible to mount on top of various ephemeral
entities in procfs. This specifically includes magic links. To
recap, magic links are links of the form /proc/<pid>/fd/<nr>. They
serve as references to a target file and during path lookup they
cause a jump to the target path. Such magic links disappear if the
corresponding file descriptor is closed.
Currently it is possible to overmount such magic links. This is
mostly interesting for an attacker that wants to somehow trick a
process into e.g., reopening something that it didn't intend to
reopen or to hide a malicious file descriptor.
But also it risks leaking mounts for long-running processes. When
overmounting a magic link like above, the mount will not be
detached when the file descriptor is closed. Only the target
mountpoint will disappear. Which has the consequence of making it
impossible to unmount that mount afterwards. So the mount will
stick around until the process exits and the /proc/<pid>/ directory
is cleaned up during proc_flush_pid() when the dentries are pruned
and invalidated.
That in turn means it's possible for a program to accidentally leak
mounts and it's also possible to make a task leak mounts without
it's knowledge if the attacker just keeps overmounting things under
/proc/<pid>/fd/<nr>.
Disallow overmounting of such ephemeral entities.
- Cleanup the readdir method naming in some procfs file operations.
- Replace kmalloc() and strcpy() with a simple kmemdup() call"
* tag 'vfs-6.12.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
proc: fold kmalloc() + strcpy() into kmemdup()
proc: block mounting on top of /proc/<pid>/fdinfo/*
proc: block mounting on top of /proc/<pid>/fd/*
proc: block mounting on top of /proc/<pid>/map_files/*
proc: add proc_splice_unmountable()
proc: proc_readfdinfo() -> proc_fdinfo_iterate()
proc: proc_readfd() -> proc_fd_iterate()
proc: add config & param to block forcing mem writes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fallocate updates from Christian Brauner:
"This contains work to try and cleanup some the fallocate mode
handling. Currently, it confusingly mixes operation modes and an
optional flag.
The work here tries to better define operation modes and optional
flags allowing the core and filesystem code to use switch statements
to switch on the operation mode"
* tag 'vfs-6.12.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: refactor xfs_file_fallocate
xfs: move the xfs_is_always_cow_inode check into xfs_alloc_file_space
xfs: call xfs_flush_unmap_range from xfs_free_file_space
fs: sort out the fallocate mode vs flag mess
ext4: remove tracing for FALLOC_FL_NO_HIDE_STALE
block: remove checks for FALLOC_FL_NO_HIDE_STALE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This is the work to cleanup and shrink struct file significantly.
Right now, (focusing on x86) struct file is 232 bytes. After this
series struct file will be 184 bytes aka 3 cacheline and a spare 8
bytes for future extensions at the end of the struct.
With struct file being as ubiquitous as it is this should make a
difference for file heavy workloads and allow further optimizations in
the future.
- struct fown_struct was embedded into struct file letting it take up
32 bytes in total when really it shouldn't even be embedded in
struct file in the first place. Instead, actual users of struct
fown_struct now allocate the struct on demand. This frees up 24
bytes.
- Move struct file_ra_state into the union containg the cleanup hooks
and move f_iocb_flags out of the union. This closes a 4 byte hole
we created earlier and brings struct file to 192 bytes. Which means
struct file is 3 cachelines and we managed to shrink it by 40
bytes.
- Reorder struct file so that nothing crosses a cacheline.
I suspect that in the future we will end up reordering some members
to mitigate false sharing issues or just because someone does
actually provide really good perf data.
- Shrinking struct file to 192 bytes is only part of the work.
Files use a slab that is SLAB_TYPESAFE_BY_RCU and when a kmem cache
is created with SLAB_TYPESAFE_BY_RCU the free pointer must be
located outside of the object because the cache doesn't know what
part of the memory can safely be overwritten as it may be needed to
prevent object recycling.
That has the consequence that SLAB_TYPESAFE_BY_RCU may end up
adding a new cacheline.
So this also contains work to add a new kmem_cache_create_rcu()
function that allows the caller to specify an offset where the
freelist pointer is supposed to be placed. Thus avoiding the
implicit addition of a fourth cacheline.
- And finally this removes the f_version member in struct file.
The f_version member isn't particularly well-defined. It is mainly
used as a cookie to detect concurrent seeks when iterating
directories. But it is also abused by some subsystems for
completely unrelated things.
It is mostly a directory and filesystem specific thing that doesn't
really need to live in struct file and with its wonky semantics it
really lacks a specific function.
For pipes, f_version is (ab)used to defer poll notifications until
a write has happened. And struct pipe_inode_info is used by
multiple struct files in their ->private_data so there's no chance
of pushing that down into file->private_data without introducing
another pointer indirection.
But pipes don't rely on f_pos_lock so this adds a union into struct
file encompassing f_pos_lock and a pipe specific f_pipe member that
pipes can use. This union of course can be extended to other file
types and is similar to what we do in struct inode already"
* tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
fs: remove f_version
pipe: use f_pipe
fs: add f_pipe
ubifs: store cookie in private data
ufs: store cookie in private data
udf: store cookie in private data
proc: store cookie in private data
ocfs2: store cookie in private data
input: remove f_version abuse
ext4: store cookie in private data
ext2: store cookie in private data
affs: store cookie in private data
fs: add generic_llseek_cookie()
fs: use must_set_pos()
fs: add must_set_pos()
fs: add vfs_setpos_cookie()
s390: remove unused f_version
ceph: remove unused f_version
adi: remove unused f_version
mm: Removed @freeptr_offset to prevent doc warning
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs folio updates from Christian Brauner:
"This contains work to port write_begin and write_end to rely on folios
for various filesystems.
This converts ocfs2, vboxfs, orangefs, jffs2, hostfs, fuse, f2fs,
ecryptfs, ntfs3, nilfs2, reiserfs, minixfs, qnx6, sysv, ufs, and
squashfs.
After this series lands a bunch of the filesystems in this list do not
mention struct page anymore"
* tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (61 commits)
Squashfs: Ensure all readahead pages have been used
Squashfs: Rewrite and update squashfs_readahead_fragment() to not use page->index
Squashfs: Update squashfs_readpage_block() to not use page->index
Squashfs: Update squashfs_readahead() to not use page->index
Squashfs: Update page_actor to not use page->index
jffs2: Use a folio in jffs2_garbage_collect_dnode()
jffs2: Convert jffs2_do_readpage_nolock to take a folio
buffer: Convert __block_write_begin() to take a folio
ocfs2: Convert ocfs2_write_zero_page to use a folio
fs: Convert aops->write_begin to take a folio
fs: Convert aops->write_end to take a folio
vboxsf: Use a folio in vboxsf_write_end()
orangefs: Convert orangefs_write_begin() to use a folio
orangefs: Convert orangefs_write_end() to use a folio
jffs2: Convert jffs2_write_begin() to use a folio
jffs2: Convert jffs2_write_end() to use a folio
hostfs: Convert hostfs_write_end() to use a folio
fuse: Convert fuse_write_begin() to use a folio
fuse: Convert fuse_write_end() to use a folio
f2fs: Convert f2fs_write_begin() to use a folio
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly continue to rework the thermal core and the thermal zone
driver interface to make the code more straightforward and reduce
bloat
The most significant piece of this work is a change of the code
related to binding cooling devices to thermal zones which, among other
things, replaces two previously existing thermal zone operations with
one allowing driver implementations to be much simpler
There is also a new thermal core testing module allowing mock thermal
zones to be created and controlled via debugfs in order to exercise
the thermal core functionality. It is expected to be used for
implementing thermal core self tests in the future
Apart from the above, there are assorted thermal driver updates
Specifics:
- Update some thermal drivers to eliminate thermal_zone_get_trip()
calls from them and get rid of that function (Rafael Wysocki)
- Update the thermal sysfs code to store trip point attributes in
trip descriptors and get to trip points via attribute pointers
(Rafael Wysocki)
- Move the computation of the low and high boundaries for
thermal_zone_set_trips() to __thermal_zone_device_update() (Daniel
Lezcano)
- Introduce a debugfs-based facility for thermal core testing (Rafael
Wysocki)
- Replace the thermal zone .bind() and .unbind() callbacks for
binding cooling devices to thermal zones with one .should_bind()
callback used for deciding whether or not a given cooling devices
should be bound to a given trip point in a given thermal zone
(Rafael Wysocki)
- Eliminate code that has no more users after the other changes, drop
some redundant checks from the thermal core and clean it up (Rafael
Wysocki)
- Fix rounding of delay jiffies in the thermal core (Rafael Wysocki)
- Refuse to accept trip point temperature or hysteresis that would
lead to an invalid threshold value when setting them via sysfs
(Rafael Wysocki)
- Adjust states of all uninitialized instances in the .manage()
callback of the Bang-bang thermal governor (Rafael Wysocki)
- Drop a couple of redundant checks along with the code depending on
them from the thermal core (Rafael Wysocki)
- Rearrange the thermal core to avoid redundant checks and simplify
control flow in a couple of code paths (Rafael Wysocki)
- Add power domain DT bindings for new Amlogic SoCs (Georges Stark)
- Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() in the ST
driver and add a Kconfig dependency on THERMAL_OF subsystem for the
STi driver (Raphael Gallais-Pou)
- Simplify the error code path in the probe functions in the brcmstb
driver with the helo of dev_err_probe() (Yan Zhen)
- Make imx_sc_thermal use dev_err_probe() (Alexander Stein)
- Remove trailing space after \n newline in the Renesas driver (Colin
Ian King)
- Add DT binding compatible string for the SA8255p to the tsens
thermal driver (Nikunj Kela)
- Use the devm_clk_get_enabled() helpers to simplify the init routine
in the sprd thermal driver (Huan Yang)
- Remove __maybe_unused notations for the functions by using the new
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros on the IMx and
Qoriq drivers (Fabio Estevam)
- Remove unused declarations from the ti-soc-thermal driver's header
file as the functions in question were removed previously (Zhang
Zekun)"
* tag 'thermal-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (48 commits)
thermal: core: Drop thermal_zone_device_is_enabled()
thermal: core: Check passive delay in monitor_thermal_zone()
thermal: core: Drop dead code from monitor_thermal_zone()
thermal: core: Drop redundant lockdep_assert_held()
thermal: gov_bang_bang: Adjust states of all uninitialized instances
thermal: sysfs: Add sanity checks for trip temperature and hysteresis
thermal/drivers/imx_sc_thermal: Use dev_err_probe
thermal/drivers/ti-soc-thermal: Remove unused declarations
thermal/drivers/imx: Remove __maybe_unused notations
thermal/drivers/qoriq: Remove __maybe_unused notations
thermal/drivers/sprd: Use devm_clk_get_enabled() helpers
dt-bindings: thermal: tsens: document support on SA8255p
thermal/drivers/renesas: Remove trailing space after \n newline
thermal/drivers/brcmstb_thermal: Simplify with dev_err_probe()
thermal/drivers/sti: Depend on THERMAL_OF subsystem
thermal/drivers/st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
dt-bindings: thermal: amlogic,thermal: add optional power-domains
thermal: core: Drop tz field from struct thermal_instance
thermal: core: Drop redundant checks from thermal_bind_cdev_to_trip()
thermal: core: Rename cdev-to-thermal-zone bind/unbind functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of new lines of code, the most visible change here is
the addition of hybrid CPU capacity scaling support to the
intel_pstate driver. Next are the amd-pstate driver changes related to
the calculation of the AMD boost numerator and preferred core
detection.
As far as new hardware support is concerned, the intel_idle driver
will now handle Granite Rapids Xeon processors natively, the
intel_rapl power capping driver will recognize family 1Ah of AMD
processors and Intel ArrowLake-U chipos, and intel_pstate will handle
Granite Rapids and Sierra Forest chips in the out-of-band (OOB) mode.
Apart from the above, there is a usual collection of assorted fixes
and code cleanups in many places and there are tooling updates.
Specifics:
- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef)
- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada)
- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki)
- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson)
- Several OF related cleanups in cpufreq drivers (Rob Herring)
- Enable COMPILE_TEST for ARM drivers (Rob Herrring)
- Introduce quirks for syscon failures and use socinfo to get
revision for TI cpufreq driver (Dhruva Gole, Nishanth Menon)
- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar)
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing)
- Make amd-pstate validate return of any attempt to update EPP
limits, which fixes the masking hardware problems (Mario
Limonciello)
- Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
(Mario Limonciello)
- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello)
- Add extra unit test coverage for mode state machine (Mario
Limonciello)
- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang
Liu)
- Add Granite Rapids Xeon support to intel_idle (Artem Bityutskiy)
- Disable promotion to C1E on Jasper Lake and Elkhart Lake in
intel_idle (Kai-Heng Feng)
- Use scoped device node handling to fix missing of_node_put() and
simplify walking OF children in the riscv-sbi cpuidle driver
(Krzysztof Kozlowski)
- Remove dead code from cpuidle_enter_state() (Dhruva Gole)
- Change an error pointer to NULL to fix error handling in the
intel_rapl power capping driver (Dan Carpenter)
- Fix off by one in get_rpi() in the intel_rapl power capping driver
(Dan Carpenter)
- Add support for ArrowLake-U to the intel_rapl power capping driver
(Sumeet Pawnikar)
- Fix the energy-pkg event for AMD CPUs in the intel_rapl power
capping driver (Dhananjay Ugwekar)
- Add support for AMD family 1Ah processors to the intel_rapl power
capping driver (Dhananjay Ugwekar)
- Remove unused stub for saveable_highmem_page() and remove
deprecated macros from power management documentation (Andy
Shevchenko)
- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo)
- Update the maintainers information for the
operating-points-v2-ti-cpu DT binding (Dhruva Gole)
- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring)
- Add missing MODULE_DESCRIPTION() macros to devfreq governors (Jeff
Johnson)
- Use devm_clk_get_enabled() in the exynos-bus devfreq driver (Anand
Moon)
- Use of_property_present() instead of of_get_property() in the
imx-bus devfreq driver (Rob Herring)
- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin)
- Make cpupower display residency value in idle-info (Aboorva
Devarajan)
- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV)
- Add SWIG support to cpupower (John B. Wyatt IV)"
* tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (62 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
PM: hibernate: Remove unused stub for saveable_highmem_page()
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream version
20240827, add support for ACPI-based enumeration of interrupt
controllers on RISC-V along with some related irqchip updates, clean
up the ACPI device object sysfs interface, add some quirks for
backlight handling and IRQ overrides, fix assorted issues and clean up
code.
Specifics:
- Check return value in acpi_db_convert_to_package() (Pei Xiao)
- Detect FACS and allow setting the waking vector on reduced-hardware
ACPI platforms (Jiaqing Zhao)
- Allow ACPICA to represent semaphores as integers (Adrien Destugues)
- Complete CXL 3.0 CXIMS structures support in ACPICA (Zhang Rui)
- Make ACPICA support SPCR version 4 and add RISC-V SBI Subtype to
DBG2 (Sia Jee Heng)
- Implement the Dword_PCC Resource Descriptor Macro in ACPICA (Jose
Marinho)
- Correct the typo in struct acpi_mpam_msc_node member (Punit
Agrawal)
- Implement ACPI_WARNING_ONCE() and ACPI_ERROR_ONCE() and use them to
prevent a Stall() violation warning from being printed every time
this takes place (Vasily Khoruzhick)
- Allow PCC Data Type in MCTP resource (Adam Young)
- Fix memory leaks on acpi_ps_get_next_namepath() and
acpi_ps_get_next_field() failures (Armin Wolf)
- Add support for supressing leading zeros in hex strings when
converting them to integers and update integer-to-hex-string
conversions in ACPICA (Armin Wolf)
- Add support for Windows 11 22H2 _OSI string (Armin Wolf)
- Avoid warning for Dump Functions in ACPICA (Adam Lackorzynski)
- Add extended linear address mode to HMAT MSCIS in ACPICA (Dave
Jiang)
- Handle empty connection_node in iasl (Aleksandrs Vinarskis)
- Allow for more flexibility in _DSM args (Saket Dumbre)
- Setup for ACPICA release 20240827 (Saket Dumbre)
- Add ACPI device enumeration support for interrupt controller
probing including taking dependencies into account (Sunil V L)
- Implement ACPI-based interrupt controller probing on RISC-V
(Sunil V L)
- Add ACPI support for AIA in riscv-intc and add ACPI support to
riscv-imsic, riscv-aplic, and sifive-plic (Sunil V L)
- Do not release locks during operation region accesses in the ACPI
EC driver (Rafael Wysocki)
- Fix up the _STR handling in the ACPI device object sysfs interface,
make it represent the device object attributes as an attribute
group and make it rely on driver core functionality for sysfs
attrubute management (Thomas Weißschuh)
- Extend error messages printed to the kernel log when
acpi_evaluate_dsm() fails to include revision and function number
(David Wang)
- Add a new AMDI0015 platform device ID to the ACPi APD driver for
AMD SoCs (Shyam Sundar S K)
- Use the driver core for the async probing management in the ACPI
battery driver (Thomas Weißschuh)
- Remove redundant initalizations of a local variable to NULL from
the ACPI battery driver (Ilpo Järvinen)
- Remove unneeded check in tps68470_pmic_opregion_probe() (Aleksandr
Mishin)
- Add support for setting the EPP register through the ACPI CPPC
sysfs interface if it is in FFH (Mario Limonciello)
- Fix MASK_VAL() usage in the ACPI CPPC library (Clément Léger)
- Reduce the log level of a per-CPU message about idle states in the
ACPI processor driver (Li RongQing)
- Fix crash in exit_round_robin() in the ACPI processor aggregator
device (PAD) driver (Seiji Nishikawa)
- Add force_vendor quirk for Panasonic Toughbook CF-18 in the ACPI
backlight driver (Hans de Goede)
- Make the DMI checks related to backlight handling on Lenovo Yoga
Tab 3 X90F less strict (Hans de Goede)
- Enforce native backlight handling on Apple MacbookPro9,2 (Esther
Shimanovich)
- Add IRQ override quirks for Asus Vivobook Go E1404GAB and MECHREV
GM7XG0M, and refine the TongFang GMxXGxx quirk (Li Chen, Tamim
Khan, Werner Sembach)
- Quirk ASUS ROG M16 to default to S3 sleep (Luke D. Jones)
- Define and use symbols for device and class name lengths in the
ACPI bus type code and make the code use strscpy() instead of
strcpy() in several places (Muhammad Qasim Abdul Majeed)"
* tag 'acpi-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (70 commits)
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: CPPC: Add support for setting EPP register in FFH
ACPI: PM: Quirk ASUS ROG M16 to default to S3 sleep
ACPI: video: Add force_vendor quirk for Panasonic Toughbook CF-18
ACPI: battery: use driver core managed async probing
ACPI: button: Use strscpy() instead of strcpy()
ACPI: resource: Skip IRQ override on Asus Vivobook Go E1404GAB
ACPI: CPPC: Fix MASK_VAL() usage
irqchip/sifive-plic: Add ACPI support
ACPICA: Setup for ACPICA release 20240827
ACPICA: Allow for more flexibility in _DSM args
ACPICA: iasl: handle empty connection_node
ACPICA: HMAT: Add extended linear address mode to MSCIS
ACPICA: Avoid warning for Dump Functions
ACPICA: Add support for Windows 11 22H2 _OSI string
ACPICA: Update integer-to-hex-string conversions
ACPICA: Add support for supressing leading zeros in hex strings
ACPICA: Allow for supressing leading zeros when using acpi_ex_convert_to_ascii()
ACPICA: Fix memory leak if acpi_ps_get_next_field() fails
ACPICA: Fix memory leak if acpi_ps_get_next_namepath() fails
...
|
|
Pull kvm updates from Paolo Bonzini:
"These are the non-x86 changes (mostly ARM, as is usually the case).
The generic and x86 changes will come later"
ARM:
- New Stage-2 page table dumper, reusing the main ptdump
infrastructure
- FP8 support
- Nested virtualization now supports the address translation
(FEAT_ATS1A) family of instructions
- Add selftest checks for a bunch of timer emulation corner cases
- Fix multiple cases where KVM/arm64 doesn't correctly handle the
guest trying to use a GICv3 that wasn't advertised
- Remove REG_HIDDEN_USER from the sysreg infrastructure, making
things little simpler
- Prevent MTE tags being restored by userspace if we are actively
logging writes, as that's a recipe for disaster
- Correct the refcount on a page that is not considered for MTE tag
copying (such as a device)
- When walking a page table to split block mappings, synchronize only
at the end the walk rather than on every store
- Fix boundary check when transfering memory using FFA
- Fix pKVM TLB invalidation, only affecting currently out of tree
code but worth addressing for peace of mind
LoongArch:
- Revert qspinlock to test-and-set simple lock on VM.
- Add Loongson Binary Translation extension support.
- Add PMU support for guest.
- Enable paravirt feature control from VMM.
- Implement function kvm_para_has_feature().
RISC-V:
- Fix sbiret init before forwarding to userspace
- Don't zero-out PMU snapshot area before freeing data
- Allow legacy PMU access from guest
- Fix to allow hpmcounter31 from the guest"
* tag 'for-linus-non-x86' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (64 commits)
LoongArch: KVM: Implement function kvm_para_has_feature()
LoongArch: KVM: Enable paravirt feature control from VMM
LoongArch: KVM: Add PMU support for guest
KVM: arm64: Get rid of REG_HIDDEN_USER visibility qualifier
KVM: arm64: Simplify visibility handling of AArch32 SPSR_*
KVM: arm64: Simplify handling of CNTKCTL_EL12
LoongArch: KVM: Add vm migration support for LBT registers
LoongArch: KVM: Add Binary Translation extension support
LoongArch: KVM: Add VM feature detection function
LoongArch: Revert qspinlock to test-and-set simple lock on VM
KVM: arm64: Register ptdump with debugfs on guest creation
arm64: ptdump: Don't override the level when operating on the stage-2 tables
arm64: ptdump: Use the ptdump description from a local context
arm64: ptdump: Expose the attribute parsing functionality
KVM: arm64: Add memory length checks and remove inline in do_ffa_mem_xfer
KVM: arm64: Move pagetable definitions to common header
KVM: arm64: nv: Add support for FEAT_ATS1A
KVM: arm64: nv: Plumb handling of AT S1* traps from EL2
KVM: arm64: nv: Make AT+PAN instructions aware of FEAT_PAN3
KVM: arm64: nv: Sanitise SCTLR_EL1.EPAN according to VM configuration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull byte cmpxchg updates from Paul McKenney:
"ARC/sh/xtensa: Provide one-byte cmpxchg emulation
This series provides emulated one-byte cmpxchg() support for ARM, sh,
and xtensa using the cmpxchg_emu_u8() function that uses a four-byte
cmpxchg() to emulate the one-byte variant.
This covers all architectures"
* tag 'cmpxchg.2024.09.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
xtensa: Emulate one-byte cmpxchg
sh: Emulate one-byte cmpxchg
ARC: Emulate one-byte cmpxchg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- use devm_clk_get_enabled() helper
- prototype fixes
- cleanup unused stuff
* tag 'mips_6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Remove posix_types.h include from sigcontext.h
bus: bt1-apb: change to use devm_clk_get_enabled() helper
bus: bt1-axi: change to use devm_clk_get_enabled() helper
MIPS: dec: prom: Remove unused unregister_prom_console() declaration
MIPS: Remove unused mips_display/_scroll_message() declarations
MIPS: Remove unused declarations in asm/cmp.h
MIPS: MT: Remove unused function mips_mt_regdump()
mips/jazz: remove unused jazz_handle_int() declaration
MIPS: Remove unused function dump_au1000_dma_channel() in dma.c
MIPS: ralink: Fix missing `get_c0_perfcount_int` prototype
MIPS: ralink: Fix missing `plat_time_init` prototype
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Dave Hansen:
"These fix a deadlock in the SGX NUMA allocator.
It's probably only triggerable today on servers with buggy BIOSes, but
it's theoretically possible it can happen on less goofy systems"
* tag 'x86_sgx_for_6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Log information when a node lacks an EPC section
x86/sgx: Fix deadlock in SGX NUMA node search
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hw mitigation updates from Borislav Petkov:
- Add CONFIG_ option for every hw CPU mitigation. The intent is to
support configurations and scenarios where the mitigations code is
irrelevant
- Other small fixlets and improvements
* tag 'x86_bugs_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Fix handling when SRSO mitigation is disabled
x86/bugs: Add missing NO_SSB flag
Documentation/srso: Document a method for checking safe RET operates properly
x86/bugs: Add a separate config for GDS
x86/bugs: Remove GDS Force Kconfig option
x86/bugs: Add a separate config for SSB
x86/bugs: Add a separate config for Spectre V2
x86/bugs: Add a separate config for SRBDS
x86/bugs: Add a separate config for Spectre v1
x86/bugs: Add a separate config for RETBLEED
x86/bugs: Add a separate config for L1TF
x86/bugs: Add a separate config for MMIO Stable Data
x86/bugs: Add a separate config for TAA
x86/bugs: Add a separate config for MDS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Add the final conversions to the new Intel VFM CPU model matching
macros which include the vendor and finally drop the old ones which
hardcode family 6
* tag 'x86_cpu_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/vfm: Delete all the *_FAM6_ CPU #defines
x86/cpu/vfm: Delete X86_MATCH_INTEL_FAM6_MODEL[_STEPPING]() macros
extcon: axp288: Switch to new Intel CPU model defines
x86/cpu/intel: Replace PAT erratum model/family magic numbers with symbolic IFM references
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- A bunch of cleanups to the sev-guest driver. All in preparation for
future SEV work
* tag 'x86_sev_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sev-guest: Ensure the SNP guest messages do not exceed a page
virt: sev-guest: Fix user-visible strings
virt: sev-guest: Rename local guest message variables
virt: sev-guest: Replace dev_dbg() with pr_debug()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Reorganize the struct mce populating functions so that MCA errors
reported through BIOS' BERT method can report the correct CPU number
the error has been detected on
* tag 'ras_core_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Use mce_prep_record() helpers for apei_smca_report_x86_error()
x86/mce: Define mce_prep_record() helpers for common and per-CPU fields
x86/mce: Rename mce_setup() to mce_prep_record()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loading updates from Borislav Petkov:
- Simplify microcode patches loading on AMD Zen and newer by using the
family, model and stepping encoded in the patch revision number
- Fix a silly clang warning
* tag 'x86_microcode_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Fix a -Wsometimes-uninitialized clang false positive
x86/microcode/AMD: Use the family,model,stepping encoded in the patch ID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Drop a now obsolete ppc4xx_edac driver
- Fix conversion to physical memory addresses on Intel's Elkhart Lake
and Ice Lake hardware when the system address is above the
(Top-Of-Memory) TOM address
- Pay attention to the memory hole on Zynq UltraScale+ MPSoC DDR
controllers when injecting errors for testing purposes
- Add support for translating normalized error addresses reported by an
AMD memory controller into system physical addresses using an UEFI
mechanism called platform runtime mechanism (PRM).
- The usual cleanups and fixes
* tag 'edac_updates_for_v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Drop obsolete PPC4xx driver
EDAC/sb_edac: Fix the compile warning of large frame size
EDAC/{skx_common,i10nm}: Remove the AMAP register for determing DDR5
EDAC/{skx_common,skx,i10nm}: Move the common debug code to skx_common
EDAC/igen6: Fix conversion of system address to physical memory address
EDAC/synopsys: Fix error injection on Zynq UltraScale+
RAS/AMD/ATL: Translate normalized to system physical addresses using PRM
ACPI: PRM: Add PRM handler direct call support
|
|
Pull ARM updates from Russell King:
- clean up TTBCR magic numbers and use u32 for this register
- fix clang issue in VFP code leading to kernel oops, caused by
compiler instruction scheduling.
- switch 32-bit Arm to use GENERIC_CPU_DEVICES and use the
arch_cpu_is_hotpluggable() hook.
- pass struct device to arm_iommu_create_mapping() and move over to use
iommu_paging_domain_alloc() rather than iommu_domain_alloc()
- make amba_bustype constant
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9418/1: dma-mapping: Use iommu_paging_domain_alloc()
ARM: 9417/1: dma-mapping: Pass device to arm_iommu_create_mapping()
ARM: 9416/1: amba: make amba_bustype constant
ARM: 9412/1: Convert to arch_cpu_is_hotpluggable()
ARM: 9411/1: Switch over to GENERIC_CPU_DEVICES using arch_register_cpu()
ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros
ARM: 9409/1: mmu: Do not use magic number for TTBCR settings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu"
"API:
- Make self-test asynchronous
Algorithms:
- Remove MPI functions added for SM3
- Add allocation error checks to remaining MPI functions (introduced
for SM3)
- Set default Jitter RNG OSR to 3
Drivers:
- Add hwrng driver for Rockchip RK3568 SoC
- Allow disabling SR-IOV VFs through sysfs in qat
- Fix device reset bugs in hisilicon
- Fix authenc key parsing by using generic helper in octeontx*
Others:
- Fix xor benchmarking on parisc"
* tag 'v6.12-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (96 commits)
crypto: n2 - Set err to EINVAL if snprintf fails for hmac
crypto: camm/qi - Use ERR_CAST() to return error-valued pointer
crypto: mips/crc32 - Clean up useless assignment operations
crypto: qcom-rng - rename *_of_data to *_match_data
crypto: qcom-rng - fix support for ACPI-based systems
dt-bindings: crypto: qcom,prng: document support for SA8255p
crypto: aegis128 - Fix indentation issue in crypto_aegis128_process_crypt()
crypto: octeontx* - Select CRYPTO_AUTHENC
crypto: testmgr - Hide ENOENT errors
crypto: qat - Remove trailing space after \n newline
crypto: hisilicon/sec - Remove trailing space after \n newline
crypto: algboss - Pass instance creation error up
crypto: api - Fix generic algorithm self-test races
crypto: hisilicon/qm - inject error before stopping queue
crypto: hisilicon/hpre - mask cluster timeout error
crypto: hisilicon/qm - reset device before enabling it
crypto: hisilicon/trng - modifying the order of header files
crypto: hisilicon - add a lock for the qp send operation
crypto: hisilicon - fix missed error branch
crypto: ccp - do not request interrupt on cmd completion when irqs disabled
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The zero-copy changes are relatively significant, but regression risk
should be contained. The feature needs to be used to cause trouble.
Also it feels like we got an order of magnitude more semi-automated
"refactoring" chaff than usual, I wonder if it's just us.
Core & protocols:
- Support Device Memory TCP, ability to zero-copy receive TCP
payloads to a DMABUF region of memory while packet headers land
separately in normal kernel buffers, and TCP processes then as
usual.
- The ability to read the PTP PHC (Physical Hardware Clock) alongside
MONOTONIC_RAW timestamps with PTP_SYS_OFFSET_EXTENDED. Previously
only CLOCK_REALTIME was supported.
- Allow matching on all bits of IP DSCP for routing decisions.
Previously we only supported on matching TOS bits in IPv4 which is
a narrower interpretation of the same header field.
- Increase the range of weights used for multi-path routing from
8 bits to 16 bits.
- Add support for IPv6 PIO p flag in the Prefix Information Option
per draft-ietf-6man-pio-pflag.
- IPv6 IOAM6 support for new tunsrc encap mode for better
performance.
- Detect destinations which blackhole MPTCP traffic and avoid
initiating MPTCP connections to them for a certain period of time,
1h by default.
- Improve IPsec control path performance by removing the inexact
policies list.
- AF_VSOCK: add support for SIOCOUTQ ioctl.
- Add enum for reasons TCP reset was sent for easier tracing.
- Add SMC ringbufs usage statistics.
Drivers:
- Handle netconsole setup failures more gracefully, don't fail
loading, retain the specified target as disabled.
- Extend bonding's IPsec offload pass thru capabilities (ESN, stats).
Filtering:
- Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime.
- Support using BPF skb helpers in tracepoints.
- Conntrack Netlink: support CTA_FILTER for flush.
- Improve SCTP support in nfnetlink_queue.
- Improve performance of large nftables flush transactions.
Things we sprinkled into general kernel code:
- selftests: support setting an "interpreter" for script files; make
it easy to run as separate cases tests where one "interpreter" is
fed various test descriptions (in our case packet sequences).
Driver API:
- Extend core and ethtool APIs to support many PHYs connected to a
single interface (PHY topologies).
- Extend cable diagnostics to specify whether Time Domain
Reflectometry (TDR) or Active Link Cable Diagnostic (ALCD) was
used.
- Add library for implementing MAC-PHY Ethernet drivers for SPI
devices compatible with Open Alliance 10BASE-T1x MAC-PHY Serial
Interface (TC6) standard.
- Add helpers to the PHY framework, for PHYs following the Open
Alliance standards:
- 1000BaseT1 link settings
- cable test and diagnostics
- Support listing / dumping all allocated RSS contexts.
- Add configuration for frequency Embedded SYNC in DPLL, which
magically embeds sync pulses into Ethernet signaling.
Device drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- use better FW APIs for queue reset
- support QOS and TPID settings for the SR-IOV VLAN
- support dynamic MSI-X allocation
- Intel (100G, ice, idpf):
- ice: support PCIe subfunctions
- iavf: add support for TC U32 filters on VFs
- ice: support Embedded SYNC in DPLL
- nVidia/Mellanox (mlx5):
- support HW managed steering tables
- support PCIe PTM cross timestamping
- AMD/Pensando:
- ionic: use page_pool to increase Rx performance
- Cisco (enic):
- report per-queue statistics
- Ethernet virtual:
- Microsoft vNIC:
- mana: support configuring ring length
- netvsc: enable more channels on systems with many CPUs
- IBM veth:
- optimize polling to improve TCP_RR performance
- optimize performance of Tx handling
- VirtIO net:
- synchronize the operstate with the admin state to allow a
lower virtio-net to propagate the link status to an upper
device like macvlan
- Ethernet NICs consumer, and embedded:
- Add driver for Realtek automotive PCIe devices (RTL9054,
RTL9068, RTL9072, RTL9075, RTL9068, RTL9071)
- Add driver for Microchip LAN8650/1 10BASE-T1S MAC-PHY.
- Microchip:
- lan743x: use phylink - support WOL, EEE, pause, link settings
- add Wake-on-LAN support for KSZ87xx family
- add KSZ8895/KSZ8864 switch support
- factor out FDMA code and use it in sparx5 and lan966x
(including DCB support in both)
- Synopsys (stmmac):
- support frame preemption (configured using TC and ethtool)
- support Loongson DWMAC (GMAC v3.73)
- support RockChips RK3576 DWMAC
- TI:
- am65-cpsw: add multi queue RX support
- icssg-prueth: HSR offload support
- Cadence (macb):
- enable software (hrtimer based) IRQ coalescing by default
- Xilinx (axinet):
- expose HW statistics
- improve multicast filtering
- relax Rx checksum offload constraints
- MediaTek:
- mt7530: add EN7581 support
- Aspeed (ftgmac100):
- report link speed and duplex
- Intel:
- igc: add mqprio offload
- igc: report EEE configuration
- RealTek (r8169):
- add support for RTL8126A rev.b
- Vitesse (vsc73xx):
- implement FDB add/del/dump operations
- Freescale (fs_enet):
- use phylink
- Ethernet PHYs:
- vitesse: implement downshift and MDI-X in vsc73xx PHYs
- microchip: support LAN887x, supporting IEEE 802.3bw (100BASE-T1)
and IEEE 802.3bp (1000BASE-T1) specifications
- add Applied Micro QT2025 PHY driver (in Rust)
- add Motorcomm yt8821 2.5G Ethernet PHY driver
- CAN:
- add driver for Rockchip RK3568 CAN-FD controller
- flexcan: add wakeup support for imx95
- kvaser_usb: set hardware timestamp on transmitted packets
- WiFi:
- mac80211/cfg80211:
- EHT rate support in AQL airtime fairness
- handle DFS (radar detection) per link in Multi-Link Operation
- RealTek (rtw89):
- support RTL8852BT and 8852BE-VT (WiFi 6)
- support hardware rfkill
- support HW encryption in unicast management frames
- support Wake-on-WLAN with supported network detection
- RealTek (rtw89):
- improve Rx performance by using USB frame aggregation
- support USB 3 with RTL8822CU/RTL8822BU
- Intel (iwlwifi/mvm):
- offload RLC/SMPS functionality to firmware
- Marvell (mwifiex):
- add host based MLME to enable WPA3
- Bluetooth:
- add support for Amlogic HCI UART protocol
- add support for ISO data/packets to Intel and NXP drivers"
* tag 'net-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1303 commits)
net/mlx5: HWS, check the correct variable in hws_send_ring_alloc_sq()
netfilter: nft_socket: Fix a NULL vs IS_ERR() bug in nft_socket_cgroup_subtree_level()
ice: Fix a NULL vs IS_ERR() check in probe()
ice: Fix a couple NULL vs IS_ERR() bugs
net: ethernet: fs_enet: Make the per clock optional
net: ti: icssg-prueth: Add multicast filtering support in HSR mode
net: ti: icssg-prueth: Enable HSR Tx duplication, Tx Tag and Rx Tag offload
net: ti: icssg-prueth: Add support for HSR frame forward offload
net: ti: icssg-prueth: Stop hardcoding def_inc
net: ti: icss-iep: Move icss_iep structure
net: ibm: emac: get rid of wol_irq
net: ibm: emac: remove all waiting code
net: ibm: emac: replace of_get_property
net: ibm: emac: use netdev's phydev directly
net: ibm: emac: use devm for register_netdev
net: ibm: emac: remove mii_bus with devm
net: ibm: emac: use devm for of_iomap
net: ibm: emac: manage emac_irq with devm
net: ibm: emac: use devm for alloc_etherdev
octeontx2-af: debugfs: Add Channel info to RPM map
...
|
|
Merge in late fixes to prepare for the 6.12 net-next PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a copy and paste bug so this code checks "sq->dep_wqe" where
"sq->wr_priv" was intended. It could result in a NULL pointer
dereference.
Fixes: 2ca62599aa0b ("net/mlx5: HWS, added send engine and context handling")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/da822315-02b7-4f5b-9c86-0d5176c5069d@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nft_socket_cgroup_subtree_level()
The cgroup_get_from_path() function never returns NULL, it returns error
pointers. Update the error handling to match.
Fixes: 7f3287db6543 ("netfilter: nft_socket: make cgroupsv2 matching work with namespaces")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/bbc0c4e0-05cc-4f44-8797-2f4b3920a820@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice_allocate_sf() function returns error pointers on error. It
doesn't return NULL. Update the check to match.
Fixes: 177ef7f1e2a0 ("ice: base subfunction aux driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/6951d217-ac06-4482-a35d-15d757fd90a3@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ice_repr_create() function returns error pointers. It never returns
NULL. Fix the callers to check for IS_ERR().
Fixes: 977514fb0fa8 ("ice: create port representor for SF")
Fixes: 415db8399d06 ("ice: make representor code generic")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/7f7aeb91-8771-47b8-9275-9d9f64f947dd@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
