diff options
Diffstat (limited to 'fs')
-rw-r--r-- | fs/userfaultfd.c | 185 |
1 files changed, 111 insertions, 74 deletions
diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c index 0877222dfa47..232cbf37c59f 100644 --- a/fs/userfaultfd.c +++ b/fs/userfaultfd.c @@ -35,7 +35,9 @@ enum userfaultfd_state { struct userfaultfd_ctx { /* pseudo fd refcounting */ atomic_t refcount; - /* waitqueue head for the userfaultfd page faults */ + /* waitqueue head for the pending (i.e. not read) userfaults */ + wait_queue_head_t fault_pending_wqh; + /* waitqueue head for the userfaults */ wait_queue_head_t fault_wqh; /* waitqueue head for the pseudo fd to wakeup poll/read */ wait_queue_head_t fd_wqh; @@ -52,11 +54,6 @@ struct userfaultfd_ctx { struct userfaultfd_wait_queue { struct uffd_msg msg; wait_queue_t wq; - /* - * Only relevant when queued in fault_wqh and only used by the - * read operation to avoid reading the same userfault twice. - */ - bool pending; struct userfaultfd_ctx *ctx; }; @@ -263,17 +260,21 @@ int handle_userfault(struct vm_area_struct *vma, unsigned long address, init_waitqueue_func_entry(&uwq.wq, userfaultfd_wake_function); uwq.wq.private = current; uwq.msg = userfault_msg(address, flags, reason); - uwq.pending = true; uwq.ctx = ctx; - spin_lock(&ctx->fault_wqh.lock); + spin_lock(&ctx->fault_pending_wqh.lock); /* * After the __add_wait_queue the uwq is visible to userland * through poll/read(). */ - __add_wait_queue(&ctx->fault_wqh, &uwq.wq); + __add_wait_queue(&ctx->fault_pending_wqh, &uwq.wq); + /* + * The smp_mb() after __set_current_state prevents the reads + * following the spin_unlock to happen before the list_add in + * __add_wait_queue. + */ set_current_state(TASK_KILLABLE); - spin_unlock(&ctx->fault_wqh.lock); + spin_unlock(&ctx->fault_pending_wqh.lock); if (likely(!ACCESS_ONCE(ctx->released) && !fatal_signal_pending(current))) { @@ -283,11 +284,28 @@ int handle_userfault(struct vm_area_struct *vma, unsigned long address, } __set_current_state(TASK_RUNNING); - /* see finish_wait() comment for why list_empty_careful() */ + + /* + * Here we race with the list_del; list_add in + * userfaultfd_ctx_read(), however because we don't ever run + * list_del_init() to refile across the two lists, the prev + * and next pointers will never point to self. list_add also + * would never let any of the two pointers to point to + * self. So list_empty_careful won't risk to see both pointers + * pointing to self at any time during the list refile. The + * only case where list_del_init() is called is the full + * removal in the wake function and there we don't re-list_add + * and it's fine not to block on the spinlock. The uwq on this + * kernel stack can be released after the list_del_init. + */ if (!list_empty_careful(&uwq.wq.task_list)) { - spin_lock(&ctx->fault_wqh.lock); - list_del_init(&uwq.wq.task_list); - spin_unlock(&ctx->fault_wqh.lock); + spin_lock(&ctx->fault_pending_wqh.lock); + /* + * No need of list_del_init(), the uwq on the stack + * will be freed shortly anyway. + */ + list_del(&uwq.wq.task_list); + spin_unlock(&ctx->fault_pending_wqh.lock); } /* @@ -345,59 +363,38 @@ static int userfaultfd_release(struct inode *inode, struct file *file) up_write(&mm->mmap_sem); /* - * After no new page faults can wait on this fault_wqh, flush + * After no new page faults can wait on this fault_*wqh, flush * the last page faults that may have been already waiting on - * the fault_wqh. + * the fault_*wqh. */ - spin_lock(&ctx->fault_wqh.lock); + spin_lock(&ctx->fault_pending_wqh.lock); + __wake_up_locked_key(&ctx->fault_pending_wqh, TASK_NORMAL, 0, &range); __wake_up_locked_key(&ctx->fault_wqh, TASK_NORMAL, 0, &range); - spin_unlock(&ctx->fault_wqh.lock); + spin_unlock(&ctx->fault_pending_wqh.lock); wake_up_poll(&ctx->fd_wqh, POLLHUP); userfaultfd_ctx_put(ctx); return 0; } -/* fault_wqh.lock must be hold by the caller */ -static inline unsigned int find_userfault(struct userfaultfd_ctx *ctx, - struct userfaultfd_wait_queue **uwq) +/* fault_pending_wqh.lock must be hold by the caller */ +static inline struct userfaultfd_wait_queue *find_userfault( + struct userfaultfd_ctx *ctx) { wait_queue_t *wq; - struct userfaultfd_wait_queue *_uwq; - unsigned int ret = 0; - - VM_BUG_ON(!spin_is_locked(&ctx->fault_wqh.lock)); + struct userfaultfd_wait_queue *uwq; - list_for_each_entry(wq, &ctx->fault_wqh.task_list, task_list) { - _uwq = container_of(wq, struct userfaultfd_wait_queue, wq); - if (_uwq->pending) { - ret = POLLIN; - if (!uwq) - /* - * If there's at least a pending and - * we don't care which one it is, - * break immediately and leverage the - * efficiency of the LIFO walk. - */ - break; - /* - * If we need to find which one was pending we - * keep walking until we find the first not - * pending one, so we read() them in FIFO order. - */ - *uwq = _uwq; - } else - /* - * break the loop at the first not pending - * one, there cannot be pending userfaults - * after the first not pending one, because - * all new pending ones are inserted at the - * head and we walk it in LIFO. - */ - break; - } + VM_BUG_ON(!spin_is_locked(&ctx->fault_pending_wqh.lock)); - return ret; + uwq = NULL; + if (!waitqueue_active(&ctx->fault_pending_wqh)) + goto out; + /* walk in reverse to provide FIFO behavior to read userfaults */ + wq = list_last_entry(&ctx->fault_pending_wqh.task_list, + typeof(*wq), task_list); + uwq = container_of(wq, struct userfaultfd_wait_queue, wq); +out: + return uwq; } static unsigned int userfaultfd_poll(struct file *file, poll_table *wait) @@ -417,9 +414,20 @@ static unsigned int userfaultfd_poll(struct file *file, poll_table *wait) */ if (unlikely(!(file->f_flags & O_NONBLOCK))) return POLLERR; - spin_lock(&ctx->fault_wqh.lock); - ret = find_userfault(ctx, NULL); - spin_unlock(&ctx->fault_wqh.lock); + /* + * lockless access to see if there are pending faults + * __pollwait last action is the add_wait_queue but + * the spin_unlock would allow the waitqueue_active to + * pass above the actual list_add inside + * add_wait_queue critical section. So use a full + * memory barrier to serialize the list_add write of + * add_wait_queue() with the waitqueue_active read + * below. + */ + ret = 0; + smp_mb(); + if (waitqueue_active(&ctx->fault_pending_wqh)) + ret = POLLIN; return ret; default: BUG(); @@ -431,27 +439,47 @@ static ssize_t userfaultfd_ctx_read(struct userfaultfd_ctx *ctx, int no_wait, { ssize_t ret; DECLARE_WAITQUEUE(wait, current); - struct userfaultfd_wait_queue *uwq = NULL; + struct userfaultfd_wait_queue *uwq; - /* always take the fd_wqh lock before the fault_wqh lock */ + /* always take the fd_wqh lock before the fault_pending_wqh lock */ spin_lock(&ctx->fd_wqh.lock); __add_wait_queue(&ctx->fd_wqh, &wait); for (;;) { set_current_state(TASK_INTERRUPTIBLE); - spin_lock(&ctx->fault_wqh.lock); - if (find_userfault(ctx, &uwq)) { + spin_lock(&ctx->fault_pending_wqh.lock); + uwq = find_userfault(ctx); + if (uwq) { /* - * The fault_wqh.lock prevents the uwq to - * disappear from under us. + * The fault_pending_wqh.lock prevents the uwq + * to disappear from under us. + * + * Refile this userfault from + * fault_pending_wqh to fault_wqh, it's not + * pending anymore after we read it. + * + * Use list_del() by hand (as + * userfaultfd_wake_function also uses + * list_del_init() by hand) to be sure nobody + * changes __remove_wait_queue() to use + * list_del_init() in turn breaking the + * !list_empty_careful() check in + * handle_userfault(). The uwq->wq.task_list + * must never be empty at any time during the + * refile, or the waitqueue could disappear + * from under us. The "wait_queue_head_t" + * parameter of __remove_wait_queue() is unused + * anyway. */ - uwq->pending = false; + list_del(&uwq->wq.task_list); + __add_wait_queue(&ctx->fault_wqh, &uwq->wq); + /* careful to always initialize msg if ret == 0 */ *msg = uwq->msg; - spin_unlock(&ctx->fault_wqh.lock); + spin_unlock(&ctx->fault_pending_wqh.lock); ret = 0; break; } - spin_unlock(&ctx->fault_wqh.lock); + spin_unlock(&ctx->fault_pending_wqh.lock); if (signal_pending(current)) { ret = -ERESTARTSYS; break; @@ -510,10 +538,14 @@ static void __wake_userfault(struct userfaultfd_ctx *ctx, start = range->start; end = range->start + range->len; - spin_lock(&ctx->fault_wqh.lock); + spin_lock(&ctx->fault_pending_wqh.lock); /* wake all in the range and autoremove */ - __wake_up_locked_key(&ctx->fault_wqh, TASK_NORMAL, 0, range); - spin_unlock(&ctx->fault_wqh.lock); + if (waitqueue_active(&ctx->fault_pending_wqh)) + __wake_up_locked_key(&ctx->fault_pending_wqh, TASK_NORMAL, 0, + range); + if (waitqueue_active(&ctx->fault_wqh)) + __wake_up_locked_key(&ctx->fault_wqh, TASK_NORMAL, 0, range); + spin_unlock(&ctx->fault_pending_wqh.lock); } static __always_inline void wake_userfault(struct userfaultfd_ctx *ctx, @@ -534,7 +566,8 @@ static __always_inline void wake_userfault(struct userfaultfd_ctx *ctx, * userfaults yet. So we take the spinlock only when we're * sure we've userfaults to wake. */ - if (waitqueue_active(&ctx->fault_wqh)) + if (waitqueue_active(&ctx->fault_pending_wqh) || + waitqueue_active(&ctx->fault_wqh)) __wake_userfault(ctx, range); } @@ -960,14 +993,17 @@ static void userfaultfd_show_fdinfo(struct seq_file *m, struct file *f) struct userfaultfd_wait_queue *uwq; unsigned long pending = 0, total = 0; - spin_lock(&ctx->fault_wqh.lock); + spin_lock(&ctx->fault_pending_wqh.lock); + list_for_each_entry(wq, &ctx->fault_pending_wqh.task_list, task_list) { + uwq = container_of(wq, struct userfaultfd_wait_queue, wq); + pending++; + total++; + } list_for_each_entry(wq, &ctx->fault_wqh.task_list, task_list) { uwq = container_of(wq, struct userfaultfd_wait_queue, wq); - if (uwq->pending) - pending++; total++; } - spin_unlock(&ctx->fault_wqh.lock); + spin_unlock(&ctx->fault_pending_wqh.lock); /* * If more protocols will be added, there will be all shown @@ -1027,6 +1063,7 @@ static struct file *userfaultfd_file_create(int flags) goto out; atomic_set(&ctx->refcount, 1); + init_waitqueue_head(&ctx->fault_pending_wqh); init_waitqueue_head(&ctx->fault_wqh); init_waitqueue_head(&ctx->fd_wqh); ctx->flags = flags; |