diff options
Diffstat (limited to 'drivers')
57 files changed, 1232 insertions, 431 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 2ed8b4361d95..3576ad7bd380 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -291,6 +291,10 @@ config CLKSRC_STM32 select CLKSRC_MMIO select TIMER_OF +config CLKSRC_STM32_LP + bool "Low power clocksource for STM32 SoCs" + depends on MFD_STM32_LPTIMER || COMPILE_TEST + config CLKSRC_MPS2 bool "Clocksource for MPS2 SoCs" if COMPILE_TEST depends on GENERIC_SCHED_CLOCK diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 3994e221e262..eaedb7240ae7 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_BCM_KONA_TIMER) += bcm_kona_timer.o obj-$(CONFIG_CADENCE_TTC_TIMER) += timer-cadence-ttc.o obj-$(CONFIG_CLKSRC_EFM32) += timer-efm32.o obj-$(CONFIG_CLKSRC_STM32) += timer-stm32.o +obj-$(CONFIG_CLKSRC_STM32_LP) += timer-stm32-lp.o obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o obj-$(CONFIG_CLKSRC_LPC32XX) += timer-lpc32xx.o obj-$(CONFIG_CLKSRC_MPS2) += mps2-timer.o diff --git a/drivers/clocksource/timer-stm32-lp.c b/drivers/clocksource/timer-stm32-lp.c new file mode 100644 index 000000000000..db2841d0beb8 --- /dev/null +++ b/drivers/clocksource/timer-stm32-lp.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Authors: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics. + * Pascal Paillet <p.paillet@st.com> for STMicroelectronics. + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/mfd/stm32-lptimer.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/pm_wakeirq.h> + +#define CFGR_PSC_OFFSET 9 +#define STM32_LP_RATING 1000 +#define STM32_TARGET_CLKRATE (32000 * HZ) +#define STM32_LP_MAX_PSC 7 + +struct stm32_lp_private { + struct regmap *reg; + struct clock_event_device clkevt; + unsigned long period; + struct device *dev; +}; + +static struct stm32_lp_private* +to_priv(struct clock_event_device *clkevt) +{ + return container_of(clkevt, struct stm32_lp_private, clkevt); +} + +static int stm32_clkevent_lp_shutdown(struct clock_event_device *clkevt) +{ + struct stm32_lp_private *priv = to_priv(clkevt); + + regmap_write(priv->reg, STM32_LPTIM_CR, 0); + regmap_write(priv->reg, STM32_LPTIM_IER, 0); + /* clear pending flags */ + regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF); + + return 0; +} + +static int stm32_clkevent_lp_set_timer(unsigned long evt, + struct clock_event_device *clkevt, + int is_periodic) +{ + struct stm32_lp_private *priv = to_priv(clkevt); + + /* disable LPTIMER to be able to write into IER register*/ + regmap_write(priv->reg, STM32_LPTIM_CR, 0); + /* enable ARR interrupt */ + regmap_write(priv->reg, STM32_LPTIM_IER, STM32_LPTIM_ARRMIE); + /* enable LPTIMER to be able to write into ARR register */ + regmap_write(priv->reg, STM32_LPTIM_CR, STM32_LPTIM_ENABLE); + /* set next event counter */ + regmap_write(priv->reg, STM32_LPTIM_ARR, evt); + + /* start counter */ + if (is_periodic) + regmap_write(priv->reg, STM32_LPTIM_CR, + STM32_LPTIM_CNTSTRT | STM32_LPTIM_ENABLE); + else + regmap_write(priv->reg, STM32_LPTIM_CR, + STM32_LPTIM_SNGSTRT | STM32_LPTIM_ENABLE); + + return 0; +} + +static int stm32_clkevent_lp_set_next_event(unsigned long evt, + struct clock_event_device *clkevt) +{ + return stm32_clkevent_lp_set_timer(evt, clkevt, + clockevent_state_periodic(clkevt)); +} + +static int stm32_clkevent_lp_set_periodic(struct clock_event_device *clkevt) +{ + struct stm32_lp_private *priv = to_priv(clkevt); + + return stm32_clkevent_lp_set_timer(priv->period, clkevt, true); +} + +static int stm32_clkevent_lp_set_oneshot(struct clock_event_device *clkevt) +{ + struct stm32_lp_private *priv = to_priv(clkevt); + + return stm32_clkevent_lp_set_timer(priv->period, clkevt, false); +} + +static irqreturn_t stm32_clkevent_lp_irq_handler(int irq, void *dev_id) +{ + struct clock_event_device *clkevt = (struct clock_event_device *)dev_id; + struct stm32_lp_private *priv = to_priv(clkevt); + + regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF); + + if (clkevt->event_handler) + clkevt->event_handler(clkevt); + + return IRQ_HANDLED; +} + +static void stm32_clkevent_lp_set_prescaler(struct stm32_lp_private *priv, + unsigned long *rate) +{ + int i; + + for (i = 0; i <= STM32_LP_MAX_PSC; i++) { + if (DIV_ROUND_CLOSEST(*rate, 1 << i) < STM32_TARGET_CLKRATE) + break; + } + + regmap_write(priv->reg, STM32_LPTIM_CFGR, i << CFGR_PSC_OFFSET); + + /* Adjust rate and period given the prescaler value */ + *rate = DIV_ROUND_CLOSEST(*rate, (1 << i)); + priv->period = DIV_ROUND_UP(*rate, HZ); +} + +static void stm32_clkevent_lp_init(struct stm32_lp_private *priv, + struct device_node *np, unsigned long rate) +{ + priv->clkevt.name = np->full_name; + priv->clkevt.cpumask = cpu_possible_mask; + priv->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT; + priv->clkevt.set_state_shutdown = stm32_clkevent_lp_shutdown; + priv->clkevt.set_state_periodic = stm32_clkevent_lp_set_periodic; + priv->clkevt.set_state_oneshot = stm32_clkevent_lp_set_oneshot; + priv->clkevt.set_next_event = stm32_clkevent_lp_set_next_event; + priv->clkevt.rating = STM32_LP_RATING; + + clockevents_config_and_register(&priv->clkevt, rate, 0x1, + STM32_LPTIM_MAX_ARR); +} + +static int stm32_clkevent_lp_probe(struct platform_device *pdev) +{ + struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent); + struct stm32_lp_private *priv; + unsigned long rate; + int ret, irq; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->reg = ddata->regmap; + ret = clk_prepare_enable(ddata->clk); + if (ret) + return -EINVAL; + + rate = clk_get_rate(ddata->clk); + if (!rate) { + ret = -EINVAL; + goto out_clk_disable; + } + + irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0); + if (irq <= 0) { + ret = irq; + goto out_clk_disable; + } + + if (of_property_read_bool(pdev->dev.parent->of_node, "wakeup-source")) { + ret = device_init_wakeup(&pdev->dev, true); + if (ret) + goto out_clk_disable; + + ret = dev_pm_set_wake_irq(&pdev->dev, irq); + if (ret) + goto out_clk_disable; + } + + ret = devm_request_irq(&pdev->dev, irq, stm32_clkevent_lp_irq_handler, + IRQF_TIMER, pdev->name, &priv->clkevt); + if (ret) + goto out_clk_disable; + + stm32_clkevent_lp_set_prescaler(priv, &rate); + + stm32_clkevent_lp_init(priv, pdev->dev.parent->of_node, rate); + + priv->dev = &pdev->dev; + + return 0; + +out_clk_disable: + clk_disable_unprepare(ddata->clk); + return ret; +} + +static int stm32_clkevent_lp_remove(struct platform_device *pdev) +{ + return -EBUSY; /* cannot unregister clockevent */ +} + +static const struct of_device_id stm32_clkevent_lp_of_match[] = { + { .compatible = "st,stm32-lptimer-timer", }, + {}, +}; +MODULE_DEVICE_TABLE(of, stm32_clkevent_lp_of_match); + +static struct platform_driver stm32_clkevent_lp_driver = { + .probe = stm32_clkevent_lp_probe, + .remove = stm32_clkevent_lp_remove, + .driver = { + .name = "stm32-lptimer-timer", + .of_match_table = of_match_ptr(stm32_clkevent_lp_of_match), + }, +}; +module_platform_driver(stm32_clkevent_lp_driver); + +MODULE_ALIAS("platform:stm32-lptimer-timer"); +MODULE_DESCRIPTION("STMicroelectronics STM32 clockevent low power driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index a37d7d171382..33df0837ab41 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1193,18 +1193,6 @@ config MFD_SKY81452 This driver can also be built as a module. If so, the module will be called sky81452. -config MFD_SMSC - bool "SMSC ECE1099 series chips" - depends on I2C=y - select MFD_CORE - select REGMAP_I2C - help - If you say yes here you get support for the - ece1099 chips from SMSC. - - To compile this driver as a module, choose M here: the - module will be called smsc. - config MFD_SC27XX_PMIC tristate "Spreadtrum SC27xx PMICs" depends on ARCH_SPRD || COMPILE_TEST @@ -2053,6 +2041,27 @@ config MFD_WCD934X This driver provides common support WCD934x audio codec and its associated Pin Controller, Soundwire Controller and Audio codec. +config MFD_KHADAS_MCU + tristate "Support for Khadas System control Microcontroller" + depends on I2C + depends on ARCH_MESON || ARCH_ROCKCHIP || COMPILE_TEST + select MFD_CORE + select REGMAP_I2C + help + Support for the Khadas System control Microcontroller interface + present on their VIM and Edge boards. + + This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and + Edge boards. + + It provides multiple boot control features like password check, + power-on options, power-off control and system FAN control on recent + boards. + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 9367a92f795a..a60e5f835283 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -127,7 +127,6 @@ obj-$(CONFIG_MFD_CPCAP) += motorola-cpcap.o obj-$(CONFIG_MCP) += mcp-core.o obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o -obj-$(CONFIG_MFD_SMSC) += smsc-ece1099.o obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o ifeq ($(CONFIG_SA1100_ASSABET),y) @@ -262,5 +261,6 @@ obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o obj-$(CONFIG_MFD_STMFX) += stmfx.o +obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c index 57723f116bb5..ee71ae04b5e6 100644 --- a/drivers/mfd/ab3100-core.c +++ b/drivers/mfd/ab3100-core.c @@ -498,7 +498,7 @@ static ssize_t ab3100_get_set_reg(struct file *file, int i = 0; /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); + buf_size = min((ssize_t)count, (ssize_t)(sizeof(buf)-1)); if (copy_from_user(buf, user_buf, buf_size)) return -EFAULT; buf[buf_size] = 0; diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c index c4751fb9bc22..c393102e3a39 100644 --- a/drivers/mfd/ab3100-otp.c +++ b/drivers/mfd/ab3100-otp.c @@ -29,22 +29,22 @@ /** * struct ab3100_otp - * @dev containing device - * @locked whether the OTP is locked, after locking, no more bits + * @dev: containing device + * @locked: whether the OTP is locked, after locking, no more bits * can be changed but before locking it is still possible * to change bits from 1->0. - * @freq clocking frequency for the OTP, this frequency is either + * @freq: clocking frequency for the OTP, this frequency is either * 32768Hz or 1MHz/30 - * @paf product activation flag, indicates whether this is a real + * @paf: product activation flag, indicates whether this is a real * product (paf true) or a lab board etc (paf false) - * @imeich if this is set it is possible to override the + * @imeich: if this is set it is possible to override the * IMEI number found in the tac, fac and svn fields with * (secured) software - * @cid customer ID - * @tac type allocation code of the IMEI - * @fac final assembly code of the IMEI - * @svn software version number of the IMEI - * @debugfs a debugfs file used when dumping to file + * @cid: customer ID + * @tac: type allocation code of the IMEI + * @fac: final assembly code of the IMEI + * @svn: software version number of the IMEI + * @debugfs: a debugfs file used when dumping to file */ struct ab3100_otp { struct device *dev; diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 1a9a3414d4fa..6d1bf7c3ca3b 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -1801,7 +1801,7 @@ static ssize_t ab8500_hwreg_write(struct file *file, int buf_size, ret; /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); + buf_size = min((int)count, (int)(sizeof(buf)-1)); if (copy_from_user(buf, user_buf, buf_size)) return -EFAULT; buf[buf_size] = 0; diff --git a/drivers/mfd/altera-sysmgr.c b/drivers/mfd/altera-sysmgr.c index d2a13a547a3c..41076d121dd5 100644 --- a/drivers/mfd/altera-sysmgr.c +++ b/drivers/mfd/altera-sysmgr.c @@ -22,11 +22,9 @@ /** * struct altr_sysmgr - Altera SOCFPGA System Manager * @regmap: the regmap used for System Manager accesses. - * @base : the base address for the System Manager */ struct altr_sysmgr { struct regmap *regmap; - resource_size_t *base; }; static struct platform_driver altr_sysmgr_driver; @@ -91,6 +89,9 @@ static struct regmap_config altr_sysmgr_regmap_cfg = { * altr_sysmgr_regmap_lookup_by_phandle * Find the sysmgr previous configured in probe() and return regmap property. * Return: regmap if found or error if not found. + * + * @np: Pointer to device's Device Tree node + * @property: Device Tree property name which references the sysmgr */ struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np, const char *property) @@ -127,6 +128,7 @@ static int sysmgr_probe(struct platform_device *pdev) struct regmap_config sysmgr_config = altr_sysmgr_regmap_cfg; struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; + void __iomem *base; sysmgr = devm_kzalloc(dev, sizeof(*sysmgr), GFP_KERNEL); if (!sysmgr) @@ -139,22 +141,19 @@ static int sysmgr_probe(struct platform_device *pdev) sysmgr_config.max_register = resource_size(res) - sysmgr_config.reg_stride; if (of_device_is_compatible(np, "altr,sys-mgr-s10")) { - /* Need physical address for SMCC call */ - sysmgr->base = (resource_size_t *)res->start; sysmgr_config.reg_read = s10_protected_reg_read; sysmgr_config.reg_write = s10_protected_reg_write; - regmap = devm_regmap_init(dev, NULL, sysmgr->base, + /* Need physical address for SMCC call */ + regmap = devm_regmap_init(dev, NULL, (void *)res->start, &sysmgr_config); } else { - sysmgr->base = devm_ioremap(dev, res->start, - resource_size(res)); - if (!sysmgr->base) + base = devm_ioremap(dev, res->start, resource_size(res)); + if (!base) return -ENOMEM; sysmgr_config.max_register = res->end - res->start - 3; - regmap = devm_regmap_init_mmio(dev, sysmgr->base, - &sysmgr_config); + regmap = devm_regmap_init_mmio(dev, base, &sysmgr_config); } if (IS_ERR(regmap)) { diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index f73cf76d1373..000cb82023e3 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -80,7 +80,7 @@ int arizona_clk32k_disable(struct arizona *arizona) { mutex_lock(&arizona->clk_lock); - BUG_ON(arizona->clk32k_ref <= 0); + WARN_ON(arizona->clk32k_ref <= 0); arizona->clk32k_ref--; @@ -1426,6 +1426,15 @@ err_irq: arizona_irq_exit(arizona); err_pm: pm_runtime_disable(arizona->dev); + + switch (arizona->pdata.clk32k_src) { + case ARIZONA_32KZ_MCLK1: + case ARIZONA_32KZ_MCLK2: + arizona_clk32k_disable(arizona); + break; + default: + break; + } err_reset: arizona_enable_reset(arizona); regulator_disable(arizona->dcvdd); @@ -1448,6 +1457,15 @@ int arizona_dev_exit(struct arizona *arizona) regulator_disable(arizona->dcvdd); regulator_put(arizona->dcvdd); + switch (arizona->pdata.clk32k_src) { + case ARIZONA_32KZ_MCLK1: + case ARIZONA_32KZ_MCLK2: + arizona_clk32k_disable(arizona); + break; + default: + break; + } + mfd_remove_devices(arizona->dev); arizona_free_irq(arizona, ARIZONA_IRQ_UNDERCLOCKED, arizona); arizona_free_irq(arizona, ARIZONA_IRQ_OVERCLOCKED, arizona); diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c index 1fa2ec950e7d..d96f1d689e7f 100644 --- a/drivers/mfd/atmel-smc.c +++ b/drivers/mfd/atmel-smc.c @@ -237,7 +237,7 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_cycle); * atmel_smc_cs_conf_apply - apply an SMC CS conf * @regmap: the SMC regmap * @cs: the CS id - * @conf the SMC CS conf to apply + * @conf: the SMC CS conf to apply * * Applies an SMC CS configuration. * Only valid on at91sam9/avr32 SoCs. @@ -257,7 +257,7 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply); * @regmap: the HSMC regmap * @cs: the CS id * @layout: the layout of registers - * @conf the SMC CS conf to apply + * @conf: the SMC CS conf to apply * * Applies an SMC CS configuration. * Only valid on post-sama5 SoCs. diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c index 14f9df74f855..068e9c083f13 100644 --- a/drivers/mfd/axp20x-i2c.c +++ b/drivers/mfd/axp20x-i2c.c @@ -63,6 +63,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = { { .compatible = "x-powers,axp209", .data = (void *)AXP209_ID }, { .compatible = "x-powers,axp221", .data = (void *)AXP221_ID }, { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID }, + { .compatible = "x-powers,axp803", .data = (void *)AXP803_ID }, { .compatible = "x-powers,axp806", .data = (void *)AXP806_ID }, { }, }; @@ -74,11 +75,13 @@ static const struct i2c_device_id axp20x_i2c_id[] = { { "axp209", 0 }, { "axp221", 0 }, { "axp223", 0 }, + { "axp803", 0 }, { "axp806", 0 }, { }, }; MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); +#ifdef CONFIG_ACPI static const struct acpi_device_id axp20x_i2c_acpi_match[] = { { .id = "INT33F4", @@ -87,6 +90,7 @@ static const struct acpi_device_id axp20x_i2c_acpi_match[] = { { }, }; MODULE_DEVICE_TABLE(acpi, axp20x_i2c_acpi_match); +#endif static struct i2c_driver axp20x_i2c_driver = { .driver = { diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c index 32c2b912b58b..d07b43d7c761 100644 --- a/drivers/mfd/cros_ec_dev.c +++ b/drivers/mfd/cros_ec_dev.c @@ -24,7 +24,7 @@ static struct class cros_class = { }; /** - * cros_feature_to_name - CrOS feature id to name/short description. + * struct cros_feature_to_name - CrOS feature id to name/short description. * @id: The feature identifier. * @name: Device name associated with the feature id. * @desc: Short name that will be displayed. @@ -36,7 +36,7 @@ struct cros_feature_to_name { }; /** - * cros_feature_to_cells - CrOS feature id to mfd cells association. + * struct cros_feature_to_cells - CrOS feature id to mfd cells association. * @id: The feature identifier. * @mfd_cells: Pointer to the array of mfd cells that needs to be added. * @num_cells: Number of mfd cells into the array. diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c index b125f90dd375..a353d52210a9 100644 --- a/drivers/mfd/da9063-core.c +++ b/drivers/mfd/da9063-core.c @@ -160,7 +160,6 @@ static int da9063_clear_fault_log(struct da9063 *da9063) int da9063_device_init(struct da9063 *da9063, unsigned int irq) { - int model, variant_id, variant_code; int ret; ret = da9063_clear_fault_log(da9063); @@ -171,36 +170,6 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq) da9063->irq_base = -1; da9063->chip_irq = irq; - ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_ID, &model); - if (ret < 0) { - dev_err(da9063->dev, "Cannot read chip model id.\n"); - return -EIO; - } - if (model != PMIC_CHIP_ID_DA9063) { - dev_err(da9063->dev, "Invalid chip model id: 0x%02x\n", model); - return -ENODEV; - } - - ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &variant_id); - if (ret < 0) { - dev_err(da9063->dev, "Cannot read chip variant id.\n"); - return -EIO; - } - - variant_code = variant_id >> DA9063_CHIP_VARIANT_SHIFT; - - dev_info(da9063->dev, - "Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n", - model, variant_id); - - if (variant_code < PMIC_DA9063_BB && variant_code != PMIC_DA9063_AD) { - dev_err(da9063->dev, - "Cannot support variant code: 0x%02X\n", variant_code); - return -ENODEV; - } - - da9063->variant_code = variant_code; - ret = da9063_irq_init(da9063); if (ret) { dev_err(da9063->dev, "Cannot initialize interrupts.\n"); diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c index 455de74c0dd2..b8217ad303ce 100644 --- a/drivers/mfd/da9063-i2c.c +++ b/drivers/mfd/da9063-i2c.c @@ -22,12 +22,124 @@ #include <linux/of.h> #include <linux/regulator/of_regulator.h> +/* + * Raw I2C access required for just accessing chip and variant info before we + * know which device is present. The info read from the device using this + * approach is then used to select the correct regmap tables. + */ + +#define DA9063_REG_PAGE_SIZE 0x100 +#define DA9063_REG_PAGED_ADDR_MASK 0xFF + +enum da9063_page_sel_buf_fmt { + DA9063_PAGE_SEL_BUF_PAGE_REG = 0, + DA9063_PAGE_SEL_BUF_PAGE_VAL, + DA9063_PAGE_SEL_BUF_SIZE, +}; + +enum da9063_paged_read_msgs { + DA9063_PAGED_READ_MSG_PAGE_SEL = 0, + DA9063_PAGED_READ_MSG_REG_SEL, + DA9063_PAGED_READ_MSG_DATA, + DA9063_PAGED_READ_MSG_CNT, +}; + +static int da9063_i2c_blockreg_read(struct i2c_client *client, u16 addr, + u8 *buf, int count) +{ + struct i2c_msg xfer[DA9063_PAGED_READ_MSG_CNT]; + u8 page_sel_buf[DA9063_PAGE_SEL_BUF_SIZE]; + u8 page_num, paged_addr; + int ret; + + /* Determine page info based on register address */ + page_num = (addr / DA9063_REG_PAGE_SIZE); + if (page_num > 1) { + dev_err(&client->dev, "Invalid register address provided\n"); + return -EINVAL; + } + + paged_addr = (addr % DA9063_REG_PAGE_SIZE) & DA9063_REG_PAGED_ADDR_MASK; + page_sel_buf[DA9063_PAGE_SEL_BUF_PAGE_REG] = DA9063_REG_PAGE_CON; + page_sel_buf[DA9063_PAGE_SEL_BUF_PAGE_VAL] = + (page_num << DA9063_I2C_PAGE_SEL_SHIFT) & DA9063_REG_PAGE_MASK; + + /* Write reg address, page selection */ + xfer[DA9063_PAGED_READ_MSG_PAGE_SEL].addr = client->addr; + xfer[DA9063_PAGED_READ_MSG_PAGE_SEL].flags = 0; + xfer[DA9063_PAGED_READ_MSG_PAGE_SEL].len = DA9063_PAGE_SEL_BUF_SIZE; + xfer[DA9063_PAGED_READ_MSG_PAGE_SEL].buf = page_sel_buf; + + /* Select register address */ + xfer[DA9063_PAGED_READ_MSG_REG_SEL].addr = client->addr; + xfer[DA9063_PAGED_READ_MSG_REG_SEL].flags = 0; + xfer[DA9063_PAGED_READ_MSG_REG_SEL].len = sizeof(paged_addr); + xfer[DA9063_PAGED_READ_MSG_REG_SEL].buf = &paged_addr; + + /* Read data */ + xfer[DA9063_PAGED_READ_MSG_DATA].addr = client->addr; + xfer[DA9063_PAGED_READ_MSG_DATA].flags = I2C_M_RD; + xfer[DA9063_PAGED_READ_MSG_DATA].len = count; + xfer[DA9063_PAGED_READ_MSG_DATA].buf = buf; + + ret = i2c_transfer(client->adapter, xfer, DA9063_PAGED_READ_MSG_CNT); + if (ret < 0) { + dev_err(&client->dev, "Paged block read failed: %d\n", ret); + return ret; + } + + if (ret != DA9063_PAGED_READ_MSG_CNT) { + dev_err(&client->dev, "Paged block read failed to complete\n"); + return -EIO; + } + + return 0; +} + +enum { + DA9063_DEV_ID_REG = 0, + DA9063_VAR_ID_REG, + DA9063_CHIP_ID_REGS, +}; + +static int da9063_get_device_type(struct i2c_client *i2c, struct da9063 *da9063) +{ + u8 buf[DA9063_CHIP_ID_REGS]; + int ret; + + ret = da9063_i2c_blockreg_read(i2c, DA9063_REG_DEVICE_ID, buf, + DA9063_CHIP_ID_REGS); + if (ret) + return ret; + + if (buf[DA9063_DEV_ID_REG] != PMIC_CHIP_ID_DA9063) { + dev_err(da9063->dev, + "Invalid chip device ID: 0x%02x\n", + buf[DA9063_DEV_ID_REG]); + return -ENODEV; + } + + dev_info(da9063->dev, + "Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n", + buf[DA9063_DEV_ID_REG], buf[DA9063_VAR_ID_REG]); + + da9063->variant_code = + (buf[DA9063_VAR_ID_REG] & DA9063_VARIANT_ID_MRC_MASK) + >> DA9063_VARIANT_ID_MRC_SHIFT; + + return 0; +} + +/* + * Variant specific regmap configs + */ + static const struct regmap_range da9063_ad_readable_ranges[] = { regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_AD_REG_SECOND_D), regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), regmap_reg_range(DA9063_REG_T_OFFSET, DA9063_AD_REG_GP_ID_19), - regmap_reg_range(DA9063_REG_CHIP_ID, DA9063_REG_CHIP_VARIANT), + regmap_reg_range(DA9063_REG_DEVICE_ID, DA9063_REG_VARIANT_ID), }; static const struct regmap_range da9063_ad_writeable_ranges[] = { @@ -72,7 +184,7 @@ static const struct regmap_range da9063_bb_readable_ranges[] = { regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), regmap_reg_range(DA9063_REG_T_OFFSET, DA9063_BB_REG_GP_ID_19), - regmap_reg_range(DA9063_REG_CHIP_ID, DA9063_REG_CHIP_VARIANT), + regmap_reg_range(DA9063_REG_DEVICE_ID, DA9063_REG_VARIANT_ID), }; static const struct regmap_range da9063_bb_writeable_ranges[] = { @@ -85,7 +197,7 @@ static const struct regmap_range da9063_bb_writeable_ranges[] = { regmap_reg_range(DA9063_BB_REG_GP_ID_0, DA9063_BB_REG_GP_ID_19), }; -static const struct regmap_range da9063_bb_volatile_ranges[] = { +static const struct regmap_range da9063_bb_da_volatile_ranges[] = { regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_REG_EVENT_D), regmap_reg_range(DA9063_REG_CONTROL_A, DA9063_REG_CONTROL_B), regmap_reg_range(DA9063_REG_CONTROL_E, DA9063_REG_CONTROL_F), @@ -107,9 +219,9 @@ static const struct regmap_access_table da9063_bb_writeable_table = { .n_yes_ranges = ARRAY_SIZE(da9063_bb_writeable_ranges), }; -static const struct regmap_access_table da9063_bb_volatile_table = { - .yes_ranges = da9063_bb_volatile_ranges, - .n_yes_ranges = ARRAY_SIZE(da9063_bb_volatile_ranges), +static const struct regmap_access_table da9063_bb_da_volatile_table = { + .yes_ranges = da9063_bb_da_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(da9063_bb_da_volatile_ranges), }; static const struct regmap_range da9063l_bb_readable_ranges[] = { @@ -117,7 +229,7 @@ static const struct regmap_range da9063l_bb_readable_ranges[] = { regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), regmap_reg_range(DA9063_REG_T_OFFSET, DA9063_BB_REG_GP_ID_19), - regmap_reg_range(DA9063_REG_CHIP_ID, DA9063_REG_CHIP_VARIANT), + regmap_reg_range(DA9063_REG_DEVICE_ID, DA9063_REG_VARIANT_ID), }; static const struct regmap_range da9063l_bb_writeable_ranges[] = { @@ -129,7 +241,7 @@ static const struct regmap_range da9063l_bb_writeable_ranges[] = { regmap_reg_range(DA9063_BB_REG_GP_ID_0, DA9063_BB_REG_GP_ID_19), }; -static const struct regmap_range da9063l_bb_volatile_ranges[] = { +static const struct regmap_range da9063l_bb_da_volatile_ranges[] = { regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_REG_EVENT_D), regmap_reg_range(DA9063_REG_CONTROL_A, DA9063_REG_CONTROL_B), regmap_reg_range(DA9063_REG_CONTROL_E, DA9063_REG_CONTROL_F), @@ -151,15 +263,70 @@ static const struct regmap_access_table da9063l_bb_writeable_table = { .n_yes_ranges = ARRAY_SIZE(da9063l_bb_writeable_ranges), }; -static const struct regmap_access_table da9063l_bb_volatile_table = { - .yes_ranges = da9063l_bb_volatile_ranges, - .n_yes_ranges = ARRAY_SIZE(da9063l_bb_volatile_ranges), +static const struct regmap_access_table da9063l_bb_da_volatile_table = { + .yes_ranges = da9063l_bb_da_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(da9063l_bb_da_volatile_ranges), +}; + +static const struct regmap_range da9063_da_readable_ranges[] = { + regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_BB_REG_SECOND_D), + regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), + regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), + regmap_reg_range(DA9063_REG_T_OFFSET, DA9063_BB_REG_GP_ID_11), + regmap_reg_range(DA9063_REG_DEVICE_ID, DA9063_REG_VARIANT_ID), +}; + +static const struct regmap_range da9063_da_writeable_ranges[] = { + regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_REG_PAGE_CON), + regmap_reg_range(DA9063_REG_FAULT_LOG, DA9063_REG_VSYS_MON), + regmap_reg_range(DA9063_REG_COUNT_S, DA9063_BB_REG_ALARM_Y), + regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), + regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), + regmap_reg_range(DA9063_REG_CONFIG_I, DA9063_BB_REG_MON_REG_4), + regmap_reg_range(DA9063_BB_REG_GP_ID_0, DA9063_BB_REG_GP_ID_11), +}; + +static const struct regmap_access_table da9063_da_readable_table = { + .yes_ranges = da9063_da_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(da9063_da_readable_ranges), +}; + +static const struct regmap_access_table da9063_da_writeable_table = { + .yes_ranges = da9063_da_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(da9063_da_writeable_ranges), +}; + +static const struct regmap_range da9063l_da_readable_ranges[] = { + regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_REG_MON_A10_RES), + regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), + regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), + regmap_reg_range(DA9063_REG_T_OFFSET, DA9063_BB_REG_GP_ID_11), + regmap_reg_range(DA9063_REG_DEVICE_ID, DA9063_REG_VARIANT_ID), +}; + +static const struct regmap_range da9063l_da_writeable_ranges[] = { + regmap_reg_range(DA9063_REG_PAGE_CON, DA9063_REG_PAGE_CON), + regmap_reg_range(DA9063_REG_FAULT_LOG, DA9063_REG_VSYS_MON), + regmap_reg_range(DA9063_REG_SEQ, DA9063_REG_ID_32_31), + regmap_reg_range(DA9063_REG_SEQ_A, DA9063_REG_AUTO3_LOW), + regmap_reg_range(DA9063_REG_CONFIG_I, DA9063_BB_REG_MON_REG_4), + regmap_reg_range(DA9063_BB_REG_GP_ID_0, DA9063_BB_REG_GP_ID_11), +}; + +static const struct regmap_access_table da9063l_da_readable_table = { + .yes_ranges = da9063l_da_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(da9063l_da_readable_ranges), +}; + +static const struct regmap_access_table da9063l_da_writeable_table = { + .yes_ranges = da9063l_da_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(da9063l_da_writeable_ranges), }; static const struct regmap_range_cfg da9063_range_cfg[] = { { .range_min = DA9063_REG_PAGE_CON, - .range_max = DA9063_REG_CHIP_VARIANT, + .range_max = DA9063_REG_CONFIG_ID, .selector_reg = DA9063_REG_PAGE_CON, .selector_mask = 1 << DA9063_I2C_PAGE_SEL_SHIFT, .selector_shift = DA9063_I2C_PAGE_SEL_SHIFT, @@ -173,7 +340,7 @@ static struct regmap_config da9063_regmap_config = { .val_bits = 8, .ranges = da9063_range_cfg, .num_ranges = ARRAY_SIZE(da9063_range_cfg), - .max_register = DA9063_REG_CHIP_VARIANT, + .max_register = DA9063_REG_CONFIG_ID, .cache_type = REGCACHE_RBTREE, }; @@ -199,18 +366,72 @@ static int da9063_i2c_probe(struct i2c_client *i2c, da9063->chip_irq = i2c->irq; da9063->type = id->driver_data; - if (da9063->variant_code == PMIC_DA9063_AD) { - da9063_regmap_config.rd_table = &da9063_ad_readable_table; - da9063_regmap_config.wr_table = &da9063_ad_writeable_table; - da9063_regmap_config.volatile_table = &da9063_ad_volatile_table; - } else if (da9063->type == PMIC_TYPE_DA9063L) { - da9063_regmap_config.rd_table = &da9063l_bb_readable_table; - da9063_regmap_config.wr_table = &da9063l_bb_writeable_table; - da9063_regmap_config.volatile_table = &da9063l_bb_volatile_table; - } else { - da9063_regmap_config.rd_table = &da9063_bb_readable_table; - da9063_regmap_config.wr_table = &da9063_bb_writeable_table; - da9063_regmap_config.volatile_table = &da9063_bb_volatile_table; + ret = da9063_get_device_type(i2c, da9063); + if (ret) + return ret; + + switch (da9063->type) { + case PMIC_TYPE_DA9063: + switch (da9063->variant_code) { + case PMIC_DA9063_AD: + da9063_regmap_config.rd_table = + &da9063_ad_readable_table; + da9063_regmap_config.wr_table = + &da9063_ad_writeable_table; + da9063_regmap_config.volatile_table = + &da9063_ad_volatile_table; + break; + case PMIC_DA9063_BB: + case PMIC_DA9063_CA: + da9063_regmap_config.rd_table = + &da9063_bb_readable_table; + da9063_regmap_config.wr_table = + &da9063_bb_writeable_table; + da9063_regmap_config.volatile_table = + &da9063_bb_da_volatile_table; + break; + case PMIC_DA9063_DA: + da9063_regmap_config.rd_table = + &da9063_da_readable_table; + da9063_regmap_config.wr_table = + &da9063_da_writeable_table; + da9063_regmap_config.volatile_table = + &da9063_bb_da_volatile_table; + break; + default: + dev_err(da9063->dev, + "Chip variant not supported for DA9063\n"); + return -ENODEV; + } + break; + case PMIC_TYPE_DA9063L: + switch (da9063->variant_code) { + case PMIC_DA9063_BB: + case PMIC_DA9063_CA: + da9063_regmap_config.rd_table = + &da9063l_bb_readable_table; + da9063_regmap_config.wr_table = + &da9063l_bb_writeable_table; + da9063_regmap_config.volatile_table = + &da9063l_bb_da_volatile_table; + break; + case PMIC_DA9063_DA: + da9063_regmap_config.rd_table = + &da9063l_da_readable_table; + da9063_regmap_config.wr_table = + &da9063l_da_writeable_table; + da9063_regmap_config.volatile_table = + &da9063l_bb_da_volatile_table; + break; + default: + dev_err(da9063->dev, + "Chip variant not supported for DA9063L\n"); + return -ENODEV; + } + break; + default: + dev_err(da9063->dev, "Chip type not supported\n"); + return -ENODEV; } da9063->regmap = devm_regmap_init_i2c(i2c, &da9063_regmap_config); diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 0452b43b0423..a9d9c1cdf546 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2276,6 +2276,8 @@ bool db8500_prcmu_is_ac_wake_requested(void) * * Saves the reset reason code and then sets the APE_SOFTRST register which * fires interrupt to fw + * + * @reset_code: The reason for system reset */ void db8500_prcmu_system_reset(u16 reset_code) { @@ -3004,10 +3006,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent) return mfd_add_devices(parent, 0, ab850x_cell, 1, NULL, 0, NULL); } -/** - * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic - * - */ static int db8500_prcmu_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c index 39276fa626d2..83e676a096dc 100644 --- a/drivers/mfd/dln2.c +++ b/drivers/mfd/dln2.c @@ -287,7 +287,11 @@ static void dln2_rx(struct urb *urb) len = urb->actual_length - sizeof(struct dln2_header); if (handle == DLN2_HANDLE_EVENT) { + unsigned long flags; + + spin_lock_irqsave(&dln2->event_cb_lock, flags); dln2_run_event_callbacks(dln2, id, echo, data, len); + spin_unlock_irqrestore(&dln2->event_cb_lock, flags); } else { /* URB will be re-submitted in _dln2_transfer (free_rx_slot) */ if (dln2_transfer_complete(dln2, urb, handle, echo)) diff --git a/drivers/mfd/hi6421-pmic-core.c b/drivers/mfd/hi6421-pmic-core.c index edfc172b8607..eba88b80d969 100644 --- a/drivers/mfd/hi6421-pmic-core.c +++ b/drivers/mfd/hi6421-pmic-core.c @@ -5,7 +5,7 @@ * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd. * http://www.hisilicon.com * Copyright (c) <2013-2017> Linaro Ltd. - * http://www.linaro.org + * https://www.linaro.org * * Author: Guodong Xu <guodong.xu@linaro.org> */ diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c index 046222684b8b..9a58032f818a 100644 --- a/drivers/mfd/intel-lpss-pci.c +++ b/drivers/mfd/intel-lpss-pci.c @@ -201,6 +201,9 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x1ac4), (kernel_ulong_t)&bxt_info }, { PCI_VDEVICE(INTEL, 0x1ac6), (kernel_ulong_t)&bxt_info }, { PCI_VDEVICE(INTEL, 0x1aee), (kernel_ulong_t)&bxt_uart_info }, + /* EBG */ + { PCI_VDEVICE(INTEL, 0x1bad), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x1bae), (kernel_ulong_t)&bxt_uart_info }, /* GLK */ { PCI_VDEVICE(INTEL, 0x31ac), (kernel_ulong_t)&glk_i2c_info }, { PCI_VDEVICE(INTEL, 0x31ae), (kernel_ulong_t)&glk_i2c_info }, @@ -230,6 +233,22 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x34ea), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x34eb), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x34fb), (kernel_ulong_t)&spt_info }, + /* TGL-H */ + { PCI_VDEVICE(INTEL, 0x43a7), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x43a8), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x43a9), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x43aa), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x43ab), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x43ad), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43ae), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43d8), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43da), (kernel_ulong_t)&bxt_uart_info }, + { PCI_VDEVICE(INTEL, 0x43e8), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43e9), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43ea), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43eb), (kernel_ulong_t)&bxt_i2c_info }, + { PCI_VDEVICE(INTEL, 0x43fb), (kernel_ulong_t)&bxt_info }, + { PCI_VDEVICE(INTEL, 0x43fd), (kernel_ulong_t)&bxt_info }, /* EHL */ { PCI_VDEVICE(INTEL, 0x4b28), (kernel_ulong_t)&bxt_uart_info }, { PCI_VDEVICE(INTEL, 0x4b29), (kernel_ulong_t)&bxt_uart_info }, diff --git a/drivers/mfd/intel_soc_pmic_mrfld.c b/drivers/mfd/intel_soc_pmic_mrfld.c index bd94c989d232..71da861e8c27 100644 --- a/drivers/mfd/intel_soc_pmic_mrfld.c +++ b/drivers/mfd/intel_soc_pmic_mrfld.c @@ -91,13 +91,8 @@ static int bcove_ipc_byte_reg_write(void *context, unsigned int reg, { struct intel_soc_pmic *pmic = context; u8 ipc_in = val; - int ret; - ret = intel_scu_ipc_dev_iowrite8(pmic->scu, reg, ipc_in); - if (ret) - return ret; - - return 0; + return intel_scu_ipc_dev_iowrite8(pmic->scu, reg, ipc_in); } static const struct regmap_config bcove_regmap_config = { diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c index f48e21d8b97c..52bec01149e5 100644 --- a/drivers/mfd/kempld-core.c +++ b/drivers/mfd/kempld-core.c @@ -79,39 +79,31 @@ enum kempld_cells { KEMPLD_UART, }; -static const struct mfd_cell kempld_devs[] = { - [KEMPLD_I2C] = { - .name = "kempld-i2c", - }, - [KEMPLD_WDT] = { - .name = "kempld-wdt", - }, - [KEMPLD_GPIO] = { - .name = "kempld-gpio", - }, - [KEMPLD_UART] = { - .name = "kempld-uart", - }, +static const char *kempld_dev_names[] = { + [KEMPLD_I2C] = "kempld-i2c", + [KEMPLD_WDT] = "kempld-wdt", + [KEMPLD_GPIO] = "kempld-gpio", + [KEMPLD_UART] = "kempld-uart", }; -#define KEMPLD_MAX_DEVS ARRAY_SIZE(kempld_devs) +#define KEMPLD_MAX_DEVS ARRAY_SIZE(kempld_dev_names) static int kempld_register_cells_generic(struct kempld_device_data *pld) { - struct mfd_cell devs[KEMPLD_MAX_DEVS]; + struct mfd_cell devs[KEMPLD_MAX_DEVS] = {}; int i = 0; if (pld->feature_mask & KEMPLD_FEATURE_BIT_I2C) - devs[i++] = kempld_devs[KEMPLD_I2C]; + devs[i++].name = kempld_dev_names[KEMPLD_I2C]; if (pld->feature_mask & KEMPLD_FEATURE_BIT_WATCHDOG) - devs[i++] = kempld_devs[KEMPLD_WDT]; + devs[i++].name = kempld_dev_names[KEMPLD_WDT]; if (pld->feature_mask & KEMPLD_FEATURE_BIT_GPIO) - devs[i++] = kempld_devs[KEMPLD_GPIO]; + devs[i++].name = kempld_dev_names[KEMPLD_GPIO]; if (pld->feature_mask & KEMPLD_FEATURE_MASK_UART) - devs[i++] = kempld_devs[KEMPLD_UART]; + devs[i++].name = kempld_dev_names[KEMPLD_UART]; return mfd_add_devices(pld->dev, -1, devs, i, NULL, 0, NULL); } diff --git a/drivers/mfd/khadas-mcu.c b/drivers/mfd/khadas-mcu.c new file mode 100644 index 000000000000..44d5bb462dab --- /dev/null +++ b/drivers/mfd/khadas-mcu.c @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Khadas System control Microcontroller + * + * Copyright (C) 2020 BayLibre SAS + * + * Author(s): Neil Armstrong <narmstrong@baylibre.com> + */ +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/khadas-mcu.h> +#include <linux/module.h> +#include <linux/regmap.h> + +static bool khadas_mcu_reg_volatile(struct device *dev, unsigned int reg) +{ + if (reg >= KHADAS_MCU_USER_DATA_0_REG && + reg < KHADAS_MCU_PWR_OFF_CMD_REG) + return true; + + switch (reg) { + case KHADAS_MCU_PWR_OFF_CMD_REG: + case KHADAS_MCU_PASSWD_START_REG: + case KHADAS_MCU_CHECK_VEN_PASSWD_REG: + case KHADAS_MCU_CHECK_USER_PASSWD_REG: + case KHADAS_MCU_WOL_INIT_START_REG: + case KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG: + return true; + default: + return false; + } +} + +static bool khadas_mcu_reg_writeable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case KHADAS_MCU_PASSWD_VEN_0_REG: + case KHADAS_MCU_PASSWD_VEN_1_REG: + case KHADAS_MCU_PASSWD_VEN_2_REG: + case KHADAS_MCU_PASSWD_VEN_3_REG: + case KHADAS_MCU_PASSWD_VEN_4_REG: + case KHADAS_MCU_PASSWD_VEN_5_REG: + case KHADAS_MCU_MAC_0_REG: + case KHADAS_MCU_MAC_1_REG: + case KHADAS_MCU_MAC_2_REG: + case KHADAS_MCU_MAC_3_REG: + case KHADAS_MCU_MAC_4_REG: + case KHADAS_MCU_MAC_5_REG: + case KHADAS_MCU_USID_0_REG: + case KHADAS_MCU_USID_1_REG: + case KHADAS_MCU_USID_2_REG: + case KHADAS_MCU_USID_3_REG: + case KHADAS_MCU_USID_4_REG: + case KHADAS_MCU_USID_5_REG: + case KHADAS_MCU_VERSION_0_REG: + case KHADAS_MCU_VERSION_1_REG: + case KHADAS_MCU_DEVICE_NO_0_REG: + case KHADAS_MCU_DEVICE_NO_1_REG: + case KHADAS_MCU_FACTORY_TEST_REG: + case KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG: + return false; + default: + return true; + } +} + +static const struct regmap_config khadas_mcu_regmap_config = { + .reg_bits = 8, + .reg_stride = 1, + .val_bits = 8, + .max_register = KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG, + .volatile_reg = khadas_mcu_reg_volatile, + .writeable_reg = khadas_mcu_reg_writeable, + .cache_type = REGCACHE_RBTREE, +}; + +static struct mfd_cell khadas_mcu_fan_cells[] = { + /* VIM1/2 Rev13+ and VIM3 only */ + { .name = "khadas-mcu-fan-ctrl", }, +}; + +static struct mfd_cell khadas_mcu_cells[] = { + { .name = "khadas-mcu-user-mem", }, +}; + +static int khadas_mcu_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct khadas_mcu *ddata; + int ret; + + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + i2c_set_clientdata(client, ddata); + + ddata->dev = dev; + + ddata->regmap = devm_regmap_init_i2c(client, &khadas_mcu_regmap_config); + if (IS_ERR(ddata->regmap)) { + ret = PTR_ERR(ddata->regmap); + dev_err(dev, "Failed to allocate register map: %d\n", ret); + return ret; + } + + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + khadas_mcu_cells, + ARRAY_SIZE(khadas_mcu_cells), + NULL, 0, NULL); + if (ret) + return ret; + + if (of_find_property(dev->of_node, "#cooling-cells", NULL)) + return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + khadas_mcu_fan_cells, + ARRAY_SIZE(khadas_mcu_fan_cells), + NULL, 0, NULL); + + return 0; +} + +static const struct of_device_id khadas_mcu_of_match[] = { + { .compatible = "khadas,mcu", }, + {}, +}; +MODULE_DEVICE_TABLE(of, khadas_mcu_of_match); + +static struct i2c_driver khadas_mcu_driver = { + .driver = { + .name = "khadas-mcu-core", + .of_match_table = of_match_ptr(khadas_mcu_of_match), + }, + .probe = khadas_mcu_probe, +}; +module_i2c_driver(khadas_mcu_driver); + +MODULE_DESCRIPTION("Khadas MCU core driver"); +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/lm3533-ctrlbank.c b/drivers/mfd/lm3533-ctrlbank.c index 34fba06ec705..2537dfade51c 100644 --- a/drivers/mfd/lm3533-ctrlbank.c +++ b/drivers/mfd/lm3533-ctrlbank.c @@ -17,7 +17,6 @@ #define LM3533_MAX_CURRENT_MAX 29800 #define LM3533_MAX_CURRENT_STEP 800 -#define LM3533_BRIGHTNESS_MAX 255 #define LM3533_PWM_MAX 0x3f #define LM3533_REG_PWM_BASE 0x14 @@ -89,41 +88,33 @@ int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u16 imax) } EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_max_current); -#define lm3533_ctrlbank_set(_name, _NAME) \ -int lm3533_ctrlbank_set_##_name(struct lm3533_ctrlbank *cb, u8 val) \ -{ \ - u8 reg; \ - int ret; \ - \ - if (val > LM3533_##_NAME##_MAX) \ - return -EINVAL; \ - \ - reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_##_NAME##_BASE); \ - ret = lm3533_write(cb->lm3533, reg, val); \ - if (ret) \ - dev_err(cb->dev, "failed to set " #_name "\n"); \ - \ - return ret; \ -} \ -EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_##_name); - -#define lm3533_ctrlbank_get(_name, _NAME) \ -int lm3533_ctrlbank_get_##_name(struct lm3533_ctrlbank *cb, u8 *val) \ -{ \ - u8 reg; \ - int ret; \ - \ - reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_##_NAME##_BASE); \ - ret = lm3533_read(cb->lm3533, reg, val); \ - if (ret) \ - dev_err(cb->dev, "failed to get " #_name "\n"); \ - \ - return ret; \ -} \ -EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_##_name); - -lm3533_ctrlbank_set(brightness, BRIGHTNESS); -lm3533_ctrlbank_get(brightness, BRIGHTNESS); +int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u8 val) +{ + u8 reg; + int ret; + + reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE); + ret = lm3533_write(cb->lm3533, reg, val); + if (ret) + dev_err(cb->dev, "failed to set brightness\n"); + + return ret; +} +EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_brightness); + +int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u8 *val) +{ + u8 reg; + int ret; + + reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE); + ret = lm3533_read(cb->lm3533, reg, val); + if (ret) + dev_err(cb->dev, "failed to get brightness\n"); + + return ret; +} +EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_brightness); /* * PWM-input control mask: @@ -135,9 +126,36 @@ lm3533_ctrlbank_get(brightness, BRIGHTNESS); * bit 1 - PWM-input enabled in Zone 0 * bit 0 - PWM-input enabled */ -lm3533_ctrlbank_set(pwm, PWM); -lm3533_ctrlbank_get(pwm, PWM); +int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u8 val) +{ + u8 reg; + int ret; + + if (val > LM3533_PWM_MAX) + return -EINVAL; + + reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE); + ret = lm3533_write(cb->lm3533, reg, val); + if (ret) + dev_err(cb->dev, "failed to set PWM mask\n"); + + return ret; +} +EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_pwm); + +int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u8 *val) +{ + u8 reg; + int ret; + reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE); + ret = lm3533_read(cb->lm3533, reg, val); + if (ret) + dev_err(cb->dev, "failed to get PWM mask\n"); + + return ret; +} +EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_pwm); MODULE_AUTHOR("Johan Hovold <jhovold@gmail.com>"); MODULE_DESCRIPTION("LM3533 Control Bank interface"); diff --git a/drivers/mfd/lp873x.c b/drivers/mfd/lp873x.c index 873c608e6a5d..858c9e0a49a4 100644 --- a/drivers/mfd/lp873x.c +++ b/drivers/mfd/lp873x.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ * * Author: Keerthy <j-keerthy@ti.com> * diff --git a/drivers/mfd/lp87565.c b/drivers/mfd/lp87565.c index 4a5c8ade4ae0..2268be9113f1 100644 --- a/drivers/mfd/lp87565.c +++ b/drivers/mfd/lp87565.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ * * Author: Keerthy <j-keerthy@ti.com> */ diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c index 7e0835cb062b..8a8d733fdce5 100644 --- a/drivers/mfd/madera-core.c +++ b/drivers/mfd/madera-core.c @@ -44,7 +44,10 @@ static const char * const madera_core_supplies[] = { }; static const struct mfd_cell madera_ldo1_devs[] = { - { .name = "madera-ldo1" }, + { + .name = "madera-ldo1", + .level = MFD_DEP_LEVEL_HIGH, + }, }; static const char * const cs47l15_supplies[] = { @@ -55,8 +58,8 @@ static const char * const cs47l15_supplies[] = { static const struct mfd_cell cs47l15_devs[] = { { .name = "madera-pinctrl", }, - { .name = "madera-irq" }, - { .name = "madera-gpio" }, + { .name = "madera-irq", }, + { .name = "madera-gpio", }, { .name = "madera-extcon", .parent_supplies = cs47l15_supplies, @@ -108,7 +111,7 @@ static const char * const cs47l85_supplies[] = { static const struct mfd_cell cs47l85_devs[] = { { .name = "madera-pinctrl", }, { .name = "madera-irq", }, - { .name = "madera-micsupp" }, + { .name = "madera-micsupp", }, { .name = "madera-gpio", }, { .name = "madera-extcon", @@ -155,10 +158,10 @@ static const char * const cs47l92_supplies[] = { }; static const struct mfd_cell cs47l92_devs[] = { - { .name = "madera-pinctrl" }, + { .name = "madera-pinctrl", }, { .name = "madera-irq", }, { .name = "madera-micsupp", }, - { .name = "madera-gpio" }, + { .name = "madera-gpio", }, { .name = "madera-extcon", .parent_supplies = cs47l92_supplies, @@ -743,18 +746,22 @@ int madera_dev_exit(struct madera *madera) /* Prevent any IRQs being serviced while we clean up */ disable_irq(madera->irq); - /* - * DCVDD could be supplied by a child node, we must disable it before - * removing the children, and prevent PM runtime from turning it back on - */ - pm_runtime_disable(madera->dev); + pm_runtime_get_sync(madera->dev); - clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk); + mfd_remove_devices(madera->dev); + + pm_runtime_disable(madera->dev); regulator_disable(madera->dcvdd); regulator_put(madera->dcvdd); - mfd_remove_devices(madera->dev); + mfd_remove_devices_late(madera->dev); + + pm_runtime_set_suspended(madera->dev); + pm_runtime_put_noidle(madera->dev); + + clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk); + madera_enable_hard_reset(madera); regulator_bulk_disable(madera->num_core_supplies, diff --git a/drivers/mfd/madera-i2c.c b/drivers/mfd/madera-i2c.c index 6b965eb034b6..7df5b9ba5855 100644 --- a/drivers/mfd/madera-i2c.c +++ b/drivers/mfd/madera-i2c.c @@ -88,7 +88,6 @@ static int madera_i2c_probe(struct i2c_client *i2c, if (!madera) return -ENOMEM; - madera->regmap = devm_regmap_init_i2c(i2c, regmap_16bit_config); if (IS_ERR(madera->regmap)) { ret = PTR_ERR(madera->regmap); diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c index fd8864cafd25..be185e9d5f16 100644 --- a/drivers/mfd/max14577.c +++ b/drivers/mfd/max14577.c @@ -61,7 +61,7 @@ EXPORT_SYMBOL_GPL(maxim_charger_currents); int maxim_charger_calc_reg_current(const struct maxim_charger_current *limits, unsigned int min_ua, unsigned int max_ua, u8 *dst) { - unsigned int current_bits = 0xf; + unsigned int current_bits; if (min_ua > max_ua) return -EINVAL; diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index f5a73af60dd4..c3651f06684f 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/acpi.h> +#include <linux/list.h> #include <linux/property.h> #include <linux/mfd/core.h> #include <linux/pm_runtime.h> @@ -17,8 +18,17 @@ #include <linux/module.h> #include <linux/irqdomain.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/regulator/consumer.h> +static LIST_HEAD(mfd_of_node_list); + +struct mfd_of_node_entry { + struct list_head list; + struct device *dev; + struct device_node *np; +}; + static struct device_type mfd_dev_type = { .name = "mfd_device", }; @@ -107,6 +117,55 @@ static inline void mfd_acpi_add_device(const struct mfd_cell *cell, } #endif +static int mfd_match_of_node_to_dev(struct platform_device *pdev, + struct device_node *np, + const struct mfd_cell *cell) +{ +#if IS_ENABLED(CONFIG_OF) + struct mfd_of_node_entry *of_entry; + const __be32 *reg; + u64 of_node_addr; + + /* Skip devices 'disabled' by Device Tree */ + if (!of_device_is_available(np)) + return -ENODEV; + + /* Skip if OF node has previously been allocated to a device */ + list_for_each_entry(of_entry, &mfd_of_node_list, list) + if (of_entry->np == np) + return -EAGAIN; + + if (!cell->use_of_reg) + /* No of_reg defined - allocate first free compatible match */ + goto allocate_of_node; + + /* We only care about each node's first defined address */ + reg = of_get_address(np, 0, NULL, NULL); + if (!reg) + /* OF node does not contatin a 'reg' property to match to */ + return -EAGAIN; + + of_node_addr = of_read_number(reg, of_n_addr_cells(np)); + + if (cell->of_reg != of_node_addr) + /* No match */ + return -EAGAIN; + +allocate_of_node: + of_entry = kzalloc(sizeof(*of_entry), GFP_KERNEL); + if (!of_entry) + return -ENOMEM; + + of_entry->dev = &pdev->dev; + of_entry->np = np; + list_add_tail(&of_entry->list, &mfd_of_node_list); + + pdev->dev.of_node = np; + pdev->dev.fwnode = &np->fwnode; +#endif + return 0; +} + static int mfd_add_device(struct device *parent, int id, const struct mfd_cell *cell, struct resource *mem_base, @@ -115,6 +174,7 @@ static int mfd_add_device(struct device *parent, int id, struct resource *res; struct platform_device *pdev; struct device_node *np = NULL; + struct mfd_of_node_entry *of_entry, *tmp; int ret = -ENOMEM; int platform_id; int r; @@ -149,19 +209,22 @@ static int mfd_add_device(struct device *parent, int id, if (ret < 0) goto fail_res; - if (parent->of_node && cell->of_compatible) { + if (IS_ENABLED(CONFIG_OF) && parent->of_node && cell->of_compatible) { for_each_child_of_node(parent->of_node, np) { if (of_device_is_compatible(np, cell->of_compatible)) { - if (!of_device_is_available(np)) { - /* Ignore disabled devices error free */ - ret = 0; + ret = mfd_match_of_node_to_dev(pdev, np, cell); + if (ret == -EAGAIN) + continue; + if (ret) goto fail_alias; - } - pdev->dev.of_node = np; - pdev->dev.fwnode = &np->fwnode; + break; } } + + if (!pdev->dev.of_node) + pr_warn("%s: Failed to locate of_node [id: %d]\n", + cell->name, platform_id); } mfd_acpi_add_device(cell, pdev); @@ -170,13 +233,13 @@ static int mfd_add_device(struct device *parent, int id, ret = platform_device_add_data(pdev, cell->platform_data, cell->pdata_size); if (ret) - goto fail_alias; + goto fail_of_entry; } if (cell->properties) { ret = platform_device_add_properties(pdev, cell->properties); if (ret) - goto fail_alias; + goto fail_of_entry; } for (r = 0; r < cell->num_resources; r++) { @@ -213,18 +276,18 @@ static int mfd_add_device(struct device *parent, int id, if (has_acpi_companion(&pdev->dev)) { ret = acpi_check_resource_conflict(&res[r]); if (ret) - goto fail_alias; + goto fail_of_entry; } } } ret = platform_device_add_resources(pdev, res, cell->num_resources); if (ret) - goto fail_alias; + goto fail_of_entry; ret = platform_device_add(pdev); if (ret) - goto fail_alias; + goto fail_of_entry; if (cell->pm_runtime_no_callbacks) pm_runtime_no_callbacks(&pdev->dev); @@ -233,6 +296,12 @@ static int mfd_add_device(struct device *parent, int id, return 0; +fail_of_entry: + list_for_each_entry_safe(of_entry, tmp, &mfd_of_node_list, list) + if (of_entry->dev == &pdev->dev) { + list_del(&of_entry->list); + kfree(of_entry); + } fail_alias: regulator_bulk_unregister_supply_alias(&pdev->dev, cell->parent_supplies, @@ -287,6 +356,7 @@ static int mfd_remove_devices_fn(struct device *dev, void *data) { struct platform_device *pdev; const struct mfd_cell *cell; + int *level = data; if (dev->type != &mfd_dev_type) return 0; @@ -294,16 +364,31 @@ static int mfd_remove_devices_fn(struct device *dev, void *data) pdev = to_platform_device(dev); cell = mfd_get_cell(pdev); + if (level && cell->level > *level) + return 0; + regulator_bulk_unregister_supply_alias(dev, cell->parent_supplies, cell->num_parent_supplies); + kfree(cell); + platform_device_unregister(pdev); return 0; } +void mfd_remove_devices_late(struct device *parent) +{ + int level = MFD_DEP_LEVEL_HIGH; + + device_for_each_child_reverse(parent, &level, mfd_remove_devices_fn); +} +EXPORT_SYMBOL(mfd_remove_devices_late); + void mfd_remove_devices(struct device *parent) { - device_for_each_child_reverse(parent, NULL, mfd_remove_devices_fn); + int level = MFD_DEP_LEVEL_NORMAL; + + device_for_each_child_reverse(parent, &level, mfd_remove_devices_fn); } EXPORT_SYMBOL(mfd_remove_devices); @@ -318,6 +403,16 @@ static void devm_mfd_dev_release(struct device *dev, void *res) * Returns 0 on success or an appropriate negative error number on failure. * All child-devices of the MFD will automatically be removed when it gets * unbinded. + * + * @dev: Pointer to parent device. + * @id: Can be PLATFORM_DEVID_AUTO to let the Platform API take care + * of device numbering, or will be added to a device's cell_id. + * @cells: Array of (struct mfd_cell)s describing child devices. + * @n_devs: Number of child devices to register. + * @mem_base: Parent register range resource for child devices. + * @irq_base: Base of the range of virtual interrupt numbers allocated for + * this MFD device. Unused if @domain is specified. + * @domain: Interrupt domain to create mappings for hardware interrupts. */ int devm_mfd_add_devices(struct device *dev, int id, const struct mfd_cell *cells, int n_devs, diff --git a/drivers/mfd/motorola-cpcap.c b/drivers/mfd/motorola-cpcap.c index 52f38e57cdc1..2283d88adcc2 100644 --- a/drivers/mfd/motorola-cpcap.c +++ b/drivers/mfd/motorola-cpcap.c @@ -214,6 +214,28 @@ static const struct regmap_config cpcap_regmap_config = { .val_format_endian = REGMAP_ENDIAN_LITTLE, }; +#ifdef CONFIG_PM_SLEEP +static int cpcap_suspend(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + + disable_irq(spi->irq); + + return 0; +} + +static int cpcap_resume(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + + enable_irq(spi->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(cpcap_pm, cpcap_suspend, cpcap_resume); + static const struct mfd_cell cpcap_mfd_devices[] = { { .name = "cpcap_adc", @@ -313,6 +335,7 @@ static struct spi_driver cpcap_driver = { .driver = { .name = "cpcap-core", .of_match_table = cpcap_of_match, + .pm = &cpcap_pm, }, .probe = cpcap_probe, }; diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 1f4f01b02d98..1e6431cb8536 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -2,7 +2,7 @@ /** * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI * - * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com * Author: Keshava Munegowda <keshava_mgowda@ti.com> * Author: Roger Quadros <rogerq@ti.com> */ @@ -120,7 +120,7 @@ static inline u32 usbhs_read(void __iomem *base, u32 reg) /*-------------------------------------------------------------------------*/ -/** +/* * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h> * to the device tree binding portN-mode found in * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt' @@ -526,6 +526,8 @@ static const struct of_device_id usbhs_child_match_table[] = { * usbhs_omap_probe - initialize TI-based HCDs * * Allocates basic resources for this USB host controller. + * + * @pdev: Pointer to this device's platform device structure */ static int usbhs_omap_probe(struct platform_device *pdev) { diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c index 4b7f73c317e8..16fad79c73f1 100644 --- a/drivers/mfd/omap-usb-tll.c +++ b/drivers/mfd/omap-usb-tll.c @@ -2,7 +2,7 @@ /** * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI * - * Copyright (C) 2012-2013 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2012-2013 Texas Instruments Incorporated - https://www.ti.com * Author: Keshava Munegowda <keshava_mgowda@ti.com> * Author: Roger Quadros <rogerq@ti.com> */ @@ -199,6 +199,8 @@ static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) * usbtll_omap_probe - initialize TI-based HCDs * * Allocates basic resources for this USB host controller. + * + * @pdev: Pointer to this device's platform device structure */ static int usbtll_omap_probe(struct platform_device *pdev) { diff --git a/drivers/mfd/rave-sp.c b/drivers/mfd/rave-sp.c index 26c7b63e008a..abaab541df19 100644 --- a/drivers/mfd/rave-sp.c +++ b/drivers/mfd/rave-sp.c @@ -96,7 +96,7 @@ struct rave_sp_deframer { * @data: Buffer to store reply payload in * @code: Expected reply code * @ackid: Expected reply ACK ID - * @completion: Successful reply reception completion + * @received: Successful reply reception completion */ struct rave_sp_reply { size_t length; diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c index 232de50562f9..e25407ed3ad4 100644 --- a/drivers/mfd/rn5t618.c +++ b/drivers/mfd/rn5t618.c @@ -44,6 +44,9 @@ static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg) case RN5T618_INTMON: case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2: case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR: + case RN5T618_CHGSTATE: + case RN5T618_CHGCTRL_IRR ... RN5T618_CHGERR_MONI: + case RN5T618_CONTROL ... RN5T618_CC_AVEREG0: return true; default: return false; @@ -77,7 +80,7 @@ static const struct regmap_irq_chip rc5t619_irq_chip = { .mask_invert = true, }; -static struct rn5t618 *rn5t618_pm_power_off; +static struct i2c_client *rn5t618_pm_power_off; static struct notifier_block rn5t618_restart_handler; static int rn5t618_irq_init(struct rn5t618 *rn5t618) @@ -110,13 +113,38 @@ static int rn5t618_irq_init(struct rn5t618 *rn5t618) static void rn5t618_trigger_poweroff_sequence(bool repower) { + int ret; + /* disable automatic repower-on */ - regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT, - RN5T618_REPCNT_REPWRON, - repower ? RN5T618_REPCNT_REPWRON : 0); + ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_REPCNT); + if (ret < 0) + goto err; + + ret &= ~RN5T618_REPCNT_REPWRON; + if (repower) + ret |= RN5T618_REPCNT_REPWRON; + + ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off, + RN5T618_REPCNT, (u8)ret); + if (ret < 0) + goto err; + /* start power-off sequence */ - regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT, - RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF); + ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_SLPCNT); + if (ret < 0) + goto err; + + ret |= RN5T618_SLPCNT_SWPWROFF; + + ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off, + RN5T618_SLPCNT, (u8)ret); + if (ret < 0) + goto err; + + return; + +err: + dev_alert(&rn5t618_pm_power_off->dev, "Failed to shutdown (err = %d)\n", ret); } static void rn5t618_power_off(void) @@ -189,7 +217,7 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c) return ret; } - rn5t618_pm_power_off = priv; + rn5t618_pm_power_off = i2c; if (of_device_is_system_power_controller(i2c->dev.of_node)) { if (!pm_power_off) pm_power_off = rn5t618_power_off; @@ -211,9 +239,7 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c) static int rn5t618_i2c_remove(struct i2c_client *i2c) { - struct rn5t618 *priv = i2c_get_clientdata(i2c); - - if (priv == rn5t618_pm_power_off) { + if (i2c == rn5t618_pm_power_off) { rn5t618_pm_power_off = NULL; pm_power_off = NULL; } diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c index 4a09ce9609c9..d15b3e783369 100644 --- a/drivers/mfd/si476x-cmd.c +++ b/drivers/mfd/si476x-cmd.c @@ -241,13 +241,13 @@ static int si476x_core_parse_and_nag_about_error(struct si476x_core *core) /** * si476x_core_send_command() - sends a command to si476x and waits its * response - * @core: si476x_device structure for the device we are + * @core: si476x_device structure for the device we are * communicating with * @command: command id * @args: command arguments we are sending * @argn: actual size of @args - * @response: buffer to place the expected response from the device - * @respn: actual size of @response + * @resp: buffer to place the expected response from the device + * @respn: actual size of @resp * @usecs: amount of time to wait before reading the response (in * usecs) * @@ -496,7 +496,7 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property); * enable 1MOhm pulldown * SI476X_DFS_DAUDIO - set the pin to be a part of digital * audio interface - * @dout - DOUT pin function configuration: + * @dout: - DOUT pin function configuration: * SI476X_DOUT_NOOP - do not modify the behaviour * SI476X_DOUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -504,7 +504,7 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property); * port 1 * SI476X_DOUT_I2S_INPUT - set this pin to be digital in on I2S * port 1 - * @xout - XOUT pin function configuration: + * @xout: - XOUT pin function configuration: * SI476X_XOUT_NOOP - do not modify the behaviour * SI476X_XOUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -540,25 +540,25 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_dig_audio_pin_cfg); /** * si476x_cmd_zif_pin_cfg - send 'ZIF_PIN_CFG_COMMAND' - * @core - device to send the command to - * @iqclk - IQCL pin function configuration: + * @core: - device to send the command to + * @iqclk: - IQCL pin function configuration: * SI476X_IQCLK_NOOP - do not modify the behaviour * SI476X_IQCLK_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_IQCLK_IQ - set pin to be a part of I/Q interace * in master mode - * @iqfs - IQFS pin function configuration: + * @iqfs: - IQFS pin function configuration: * SI476X_IQFS_NOOP - do not modify the behaviour * SI476X_IQFS_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_IQFS_IQ - set pin to be a part of I/Q interace * in master mode - * @iout - IOUT pin function configuration: + * @iout: - IOUT pin function configuration: * SI476X_IOUT_NOOP - do not modify the behaviour * SI476X_IOUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_IOUT_OUTPUT - set pin to be I out - * @qout - QOUT pin function configuration: + * @qout: - QOUT pin function configuration: * SI476X_QOUT_NOOP - do not modify the behaviour * SI476X_QOUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -590,29 +590,29 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_zif_pin_cfg); /** * si476x_cmd_ic_link_gpo_ctl_pin_cfg - send * 'IC_LINK_GPIO_CTL_PIN_CFG' comand to the device - * @core - device to send the command to - * @icin - ICIN pin function configuration: + * @core: - device to send the command to + * @icin: - ICIN pin function configuration: * SI476X_ICIN_NOOP - do not modify the behaviour * SI476X_ICIN_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_ICIN_GPO1_HIGH - set pin to be an output, drive it high * SI476X_ICIN_GPO1_LOW - set pin to be an output, drive it low * SI476X_ICIN_IC_LINK - set the pin to be a part of Inter-Chip link - * @icip - ICIP pin function configuration: + * @icip: - ICIP pin function configuration: * SI476X_ICIP_NOOP - do not modify the behaviour * SI476X_ICIP_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_ICIP_GPO1_HIGH - set pin to be an output, drive it high * SI476X_ICIP_GPO1_LOW - set pin to be an output, drive it low * SI476X_ICIP_IC_LINK - set the pin to be a part of Inter-Chip link - * @icon - ICON pin function configuration: + * @icon: - ICON pin function configuration: * SI476X_ICON_NOOP - do not modify the behaviour * SI476X_ICON_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_ICON_I2S - set the pin to be a part of audio * interface in slave mode (DCLK) * SI476X_ICON_IC_LINK - set the pin to be a part of Inter-Chip link - * @icop - ICOP pin function configuration: + * @icop: - ICOP pin function configuration: * SI476X_ICOP_NOOP - do not modify the behaviour * SI476X_ICOP_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -647,8 +647,8 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_ic_link_gpo_ctl_pin_cfg); /** * si476x_cmd_ana_audio_pin_cfg - send 'ANA_AUDIO_PIN_CFG' to the * device - * @core - device to send the command to - * @lrout - LROUT pin function configuration: + * @core: - device to send the command to + * @lrout: - LROUT pin function configuration: * SI476X_LROUT_NOOP - do not modify the behaviour * SI476X_LROUT_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -675,15 +675,15 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_ana_audio_pin_cfg); /** * si476x_cmd_intb_pin_cfg - send 'INTB_PIN_CFG' command to the device - * @core - device to send the command to - * @intb - INTB pin function configuration: + * @core: - device to send the command to + * @intb: - INTB pin function configuration: * SI476X_INTB_NOOP - do not modify the behaviour * SI476X_INTB_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown * SI476X_INTB_DAUDIO - set pin to be a part of digital * audio interface in slave mode * SI476X_INTB_IRQ - set pin to be an interrupt request line - * @a1 - A1 pin function configuration: + * @a1: - A1 pin function configuration: * SI476X_A1_NOOP - do not modify the behaviour * SI476X_A1_TRISTATE - put the pin in tristate condition, * enable 1MOhm pulldown @@ -728,14 +728,10 @@ static int si476x_core_cmd_intb_pin_cfg_a20(struct si476x_core *core, /** * si476x_cmd_am_rsq_status - send 'AM_RSQ_STATUS' command to the * device - * @core - device to send the command to - * @rsqack - if set command clears RSQINT, SNRINT, SNRLINT, RSSIHINT, - * RSSSILINT, BLENDINT, MULTHINT and MULTLINT - * @attune - when set the values in the status report are the values - * that were calculated at tune - * @cancel - abort ongoing seek/tune opertation - * @stcack - clear the STCINT bin in status register - * @report - all signal quality information retured by the command + * @core: - device to send the command to + * @rsqargs: - pointer to a structure containing a group of sub-args + * relevant to sending the RSQ status command + * @report: - all signal quality information retured by the command * (if NULL then the output of the command is ignored) * * Function returns 0 on success and negative error code on failure @@ -862,9 +858,9 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_am_acf_status); /** * si476x_cmd_fm_seek_start - send 'FM_SEEK_START' command to the * device - * @core - device to send the command to - * @seekup - if set the direction of the search is 'up' - * @wrap - if set seek wraps when hitting band limit + * @core: - device to send the command to + * @seekup: - if set the direction of the search is 'up' + * @wrap: - if set seek wraps when hitting band limit * * This function begins search for a valid station. The station is * considered valid when 'FM_VALID_SNR_THRESHOLD' and @@ -890,12 +886,14 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_seek_start); /** * si476x_cmd_fm_rds_status - send 'FM_RDS_STATUS' command to the * device - * @core - device to send the command to - * @status_only - if set the data is not removed from RDSFIFO, + * @core: - device to send the command to + * @status_only: - if set the data is not removed from RDSFIFO, * RDSFIFOUSED is not decremented and data in all the * rest RDS data contains the last valid info received - * @mtfifo if set the command clears RDS receive FIFO - * @intack if set the command clards the RDSINT bit. + * @mtfifo: if set the command clears RDS receive FIFO + * @intack: if set the command clards the RDSINT bit. + * @report: - all signal quality information retured by the command + * (if NULL then the output of the command is ignored) * * Function returns 0 on success and negative error code on failure */ @@ -1036,9 +1034,9 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_div_status); /** * si476x_cmd_am_seek_start - send 'FM_SEEK_START' command to the * device - * @core - device to send the command to - * @seekup - if set the direction of the search is 'up' - * @wrap - if set seek wraps when hitting band limit + * @core: - device to send the command to + * @seekup: - if set the direction of the search is 'up' + * @wrap: - if set seek wraps when hitting band limit * * This function begins search for a valid station. The station is * considered valid when 'FM_VALID_SNR_THRESHOLD' and diff --git a/drivers/mfd/si476x-i2c.c b/drivers/mfd/si476x-i2c.c index c8d28b844def..c1d7b845244e 100644 --- a/drivers/mfd/si476x-i2c.c +++ b/drivers/mfd/si476x-i2c.c @@ -534,6 +534,11 @@ static irqreturn_t si476x_core_interrupt(int irq, void *dev) /** * si476x_firmware_version_to_revision() * @core: Core device structure + * @func: Selects the boot function of the device: + * *_BOOTLOADER - Boot loader + * *_FM_RECEIVER - FM receiver + * *_AM_RECEIVER - AM receiver + * *_WB_RECEIVER - Weatherband receiver * @major: Firmware major number * @minor1: Firmware first minor number * @minor2: Firmware second minor number @@ -583,7 +588,7 @@ static int si476x_core_fwver_to_revision(struct si476x_core *core, goto unknown_revision; } case SI476X_FUNC_BOOTLOADER: - default: /* FALLTHROUG */ + default: /* FALLTHROUGH */ BUG(); return -1; } diff --git a/drivers/mfd/smsc-ece1099.c b/drivers/mfd/smsc-ece1099.c deleted file mode 100644 index 57b792eb58fd..000000000000 --- a/drivers/mfd/smsc-ece1099.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * TI SMSC MFD Driver - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com - * - * Author: Sourav Poddar <sourav.poddar@ti.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; GPL v2. - * - */ - -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/workqueue.h> -#include <linux/irq.h> -#include <linux/regmap.h> -#include <linux/err.h> -#include <linux/mfd/core.h> -#include <linux/mfd/smsc.h> -#include <linux/of_platform.h> - -static const struct regmap_config smsc_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - .max_register = SMSC_VEN_ID_H, - .cache_type = REGCACHE_RBTREE, -}; - -static int smsc_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) -{ - struct smsc *smsc; - int devid, rev, venid_l, venid_h; - int ret; - - smsc = devm_kzalloc(&i2c->dev, sizeof(*smsc), GFP_KERNEL); - if (!smsc) - return -ENOMEM; - - smsc->regmap = devm_regmap_init_i2c(i2c, &smsc_regmap_config); - if (IS_ERR(smsc->regmap)) - return PTR_ERR(smsc->regmap); - - i2c_set_clientdata(i2c, smsc); - smsc->dev = &i2c->dev; - -#ifdef CONFIG_OF - of_property_read_u32(i2c->dev.of_node, "clock", &smsc->clk); -#endif - - regmap_read(smsc->regmap, SMSC_DEV_ID, &devid); - regmap_read(smsc->regmap, SMSC_DEV_REV, &rev); - regmap_read(smsc->regmap, SMSC_VEN_ID_L, &venid_l); - regmap_read(smsc->regmap, SMSC_VEN_ID_H, &venid_h); - - dev_info(&i2c->dev, "SMSCxxx devid: %02x rev: %02x venid: %02x\n", - devid, rev, (venid_h << 8) | venid_l); - - ret = regmap_write(smsc->regmap, SMSC_CLK_CTRL, smsc->clk); - if (ret) - return ret; - -#ifdef CONFIG_OF - if (i2c->dev.of_node) - ret = devm_of_platform_populate(&i2c->dev); -#endif - - return ret; -} - -static const struct i2c_device_id smsc_i2c_id[] = { - { "smscece1099", 0}, - {}, -}; - -static struct i2c_driver smsc_i2c_driver = { - .driver = { - .name = "smsc", - }, - .probe = smsc_i2c_probe, - .id_table = smsc_i2c_id, -}; -builtin_i2c_driver(smsc_i2c_driver); diff --git a/drivers/mfd/sprd-sc27xx-spi.c b/drivers/mfd/sprd-sc27xx-spi.c index 33336cde4724..f8a8b918c60d 100644 --- a/drivers/mfd/sprd-sc27xx-spi.c +++ b/drivers/mfd/sprd-sc27xx-spi.c @@ -7,7 +7,9 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mfd/core.h> +#include <linux/mfd/sc27xx-pmic.h> #include <linux/of_device.h> +#include <linux/of_platform.h> #include <linux/regmap.h> #include <linux/spi/spi.h> #include <uapi/linux/usb/charger.h> @@ -93,73 +95,6 @@ enum usb_charger_type sprd_pmic_detect_charger_type(struct device *dev) } EXPORT_SYMBOL_GPL(sprd_pmic_detect_charger_type); -static const struct mfd_cell sprd_pmic_devs[] = { - { - .name = "sc27xx-wdt", - .of_compatible = "sprd,sc2731-wdt", - }, { - .name = "sc27xx-rtc", - .of_compatible = "sprd,sc2731-rtc", - }, { - .name = "sc27xx-charger", - .of_compatible = "sprd,sc2731-charger", - }, { - .name = "sc27xx-chg-timer", - .of_compatible = "sprd,sc2731-chg-timer", - }, { - .name = "sc27xx-fast-chg", - .of_compatible = "sprd,sc2731-fast-chg", - }, { - .name = "sc27xx-chg-wdt", - .of_compatible = "sprd,sc2731-chg-wdt", - }, { - .name = "sc27xx-typec", - .of_compatible = "sprd,sc2731-typec", - }, { - .name = "sc27xx-flash", - .of_compatible = "sprd,sc2731-flash", - }, { - .name = "sc27xx-eic", - .of_compatible = "sprd,sc2731-eic", - }, { - .name = "sc27xx-efuse", - .of_compatible = "sprd,sc2731-efuse", - }, { - .name = "sc27xx-thermal", - .of_compatible = "sprd,sc2731-thermal", - }, { - .name = "sc27xx-adc", - .of_compatible = "sprd,sc2731-adc", - }, { - .name = "sc27xx-audio-codec", - .of_compatible = "sprd,sc2731-audio-codec", - }, { - .name = "sc27xx-regulator", - .of_compatible = "sprd,sc2731-regulator", - }, { - .name = "sc27xx-vibrator", - .of_compatible = "sprd,sc2731-vibrator", - }, { - .name = "sc27xx-keypad-led", - .of_compatible = "sprd,sc2731-keypad-led", - }, { - .name = "sc27xx-bltc", - .of_compatible = "sprd,sc2731-bltc", - }, { - .name = "sc27xx-fgu", - .of_compatible = "sprd,sc2731-fgu", - }, { - .name = "sc27xx-7sreset", - .of_compatible = "sprd,sc2731-7sreset", - }, { - .name = "sc27xx-poweroff", - .of_compatible = "sprd,sc2731-poweroff", - }, { - .name = "sc27xx-syscon", - .of_compatible = "sprd,sc2731-syscon", - }, -}; - static int sprd_pmic_spi_write(void *context, const void *data, size_t count) { struct device *dev = context; @@ -250,10 +185,8 @@ static int sprd_pmic_probe(struct spi_device *spi) return -ENOMEM; ddata->irq_chip.irqs = ddata->irqs; - for (i = 0; i < pdata->num_irqs; i++) { - ddata->irqs[i].reg_offset = i / pdata->num_irqs; - ddata->irqs[i].mask = BIT(i % pdata->num_irqs); - } + for (i = 0; i < pdata->num_irqs; i++) + ddata->irqs[i].mask = BIT(i); ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq, IRQF_ONESHOT | IRQF_NO_SUSPEND, 0, @@ -263,12 +196,9 @@ static int sprd_pmic_probe(struct spi_device *spi) return ret; } - ret = devm_mfd_add_devices(&spi->dev, PLATFORM_DEVID_AUTO, - sprd_pmic_devs, ARRAY_SIZE(sprd_pmic_devs), - NULL, 0, - regmap_irq_get_domain(ddata->irq_data)); + ret = devm_of_platform_populate(&spi->dev); if (ret) { - dev_err(&spi->dev, "Failed to register device %d\n", ret); + dev_err(&spi->dev, "Failed to populate sub-devices %d\n", ret); return ret; } diff --git a/drivers/mfd/stm32-lptimer.c b/drivers/mfd/stm32-lptimer.c index a00f99f36559..746e51a17cc8 100644 --- a/drivers/mfd/stm32-lptimer.c +++ b/drivers/mfd/stm32-lptimer.c @@ -17,6 +17,7 @@ static const struct regmap_config stm32_lptimer_regmap_cfg = { .val_bits = 32, .reg_stride = sizeof(u32), .max_register = STM32_LPTIM_MAX_REGISTER, + .fast_io = true, }; static int stm32_lptimer_detect_encoder(struct stm32_lptimer *ddata) diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index 3a97816d0cba..75859e492984 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -101,12 +101,14 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk) } } - syscon_config.name = of_node_full_name(np); + syscon_config.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", np, + (u64)res.start); syscon_config.reg_stride = reg_io_width; syscon_config.val_bits = reg_io_width * 8; syscon_config.max_register = resource_size(&res) - reg_io_width; regmap = regmap_init_mmio(NULL, base, &syscon_config); + kfree(syscon_config.name); if (IS_ERR(regmap)) { pr_err("regmap init failed\n"); ret = PTR_ERR(regmap); diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c index 67c9995bb1aa..7882a37ffc35 100644 --- a/drivers/mfd/tc3589x.c +++ b/drivers/mfd/tc3589x.c @@ -18,7 +18,7 @@ #include <linux/mfd/tc3589x.h> #include <linux/err.h> -/** +/* * enum tc3589x_version - indicates the TC3589x version */ enum tc3589x_version { diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index 926c289cb040..0e6e25308190 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -1,7 +1,7 @@ /* * TI Touch Screen / ADC MFD driver * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c index 65fcc58c02da..7e7dbee58ca9 100644 --- a/drivers/mfd/tps65010.c +++ b/drivers/mfd/tps65010.c @@ -404,7 +404,6 @@ static void tps65010_work(struct work_struct *work) tps65010_interrupt(tps); if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) { - int status; u8 chgconfig, tmp; chgconfig = i2c_smbus_read_byte_data(tps->client, @@ -415,8 +414,8 @@ static void tps65010_work(struct work_struct *work) else if (tps->vbus >= 100) chgconfig |= TPS_VBUS_CHARGING; - status = i2c_smbus_write_byte_data(tps->client, - TPS_CHGCONFIG, chgconfig); + i2c_smbus_write_byte_data(tps->client, + TPS_CHGCONFIG, chgconfig); /* vbus update fails unless VBUS is connected! */ tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG); diff --git a/drivers/mfd/tps65086.c b/drivers/mfd/tps65086.c index 43119a6867fe..341466ef20cc 100644 --- a/drivers/mfd/tps65086.c +++ b/drivers/mfd/tps65086.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index 7566ce4457a0..2d9c282ec917 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -3,7 +3,7 @@ * * TPS65217 chip family multi-function driver * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -205,7 +205,7 @@ EXPORT_SYMBOL_GPL(tps65217_reg_read); /** * tps65217_reg_write: Write a single tps65217 register. * - * @tps65217: Device to write to. + * @tps: Device to write to. * @reg: Register to write to. * @val: Value to write. * @level: Password protected level @@ -250,7 +250,7 @@ EXPORT_SYMBOL_GPL(tps65217_reg_write); /** * tps65217_update_bits: Modify bits w.r.t mask, val and level. * - * @tps65217: Device to write to. + * @tps: Device to write to. * @reg: Register to read-write to. * @mask: Mask. * @val: Value to write. diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c index a62ea4cb8be7..167e9fc308ef 100644 --- a/drivers/mfd/tps65218.c +++ b/drivers/mfd/tps65218.c @@ -1,7 +1,7 @@ /* * Driver for TPS65218 Integrated power management chipsets * - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version 2 as @@ -48,7 +48,7 @@ static const struct mfd_cell tps65218_cells[] = { /** * tps65218_reg_write: Write a single tps65218 register. * - * @tps65218: Device to write to. + * @tps: Device to write to. * @reg: Register to write to. * @val: Value to write. * @level: Password protected level @@ -79,7 +79,7 @@ EXPORT_SYMBOL_GPL(tps65218_reg_write); /** * tps65218_update_bits: Modify bits w.r.t mask, val and level. * - * @tps65218: Device to write to. + * @tps: Device to write to. * @reg: Register to read-write to. * @mask: Mask. * @val: Value to write. diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index c8aadd39324e..c36597797ddd 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -309,18 +309,19 @@ static const struct irq_domain_ops tps6586x_domain_ops = { static irqreturn_t tps6586x_irq(int irq, void *data) { struct tps6586x *tps6586x = data; - u32 acks; + uint32_t acks; + __le32 val; int ret = 0; ret = tps6586x_reads(tps6586x->dev, TPS6586X_INT_ACK1, - sizeof(acks), (uint8_t *)&acks); + sizeof(acks), (uint8_t *)&val); if (ret < 0) { dev_err(tps6586x->dev, "failed to read interrupt status\n"); return IRQ_NONE; } - acks = le32_to_cpu(acks); + acks = le32_to_cpu(val); while (acks) { int i = __ffs(acks); diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c index f33567bc428d..b55b1d5d6955 100644 --- a/drivers/mfd/tps65912-core.c +++ b/drivers/mfd/tps65912-core.c @@ -1,7 +1,7 @@ /* * Core functions for TI TPS65912x PMICs * - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or diff --git a/drivers/mfd/tps65912-i2c.c b/drivers/mfd/tps65912-i2c.c index 785d19f6f7c9..f7c22ea7b36c 100644 --- a/drivers/mfd/tps65912-i2c.c +++ b/drivers/mfd/tps65912-i2c.c @@ -1,7 +1,7 @@ /* * I2C access driver for TI TPS65912x PMICs * - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or diff --git a/drivers/mfd/tps65912-spi.c b/drivers/mfd/tps65912-spi.c index f78be039e463..21a8d6ac5c4a 100644 --- a/drivers/mfd/tps65912-spi.c +++ b/drivers/mfd/tps65912-spi.c @@ -1,7 +1,7 @@ /* * SPI access driver for TI TPS65912x PMICs * - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 910a304b397c..ab417438d1fa 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -477,7 +477,7 @@ static void twl4030_sih_bus_sync_unlock(struct irq_data *data) if (agent->imr_change_pending) { union { - u32 word; + __le32 word; u8 bytes[4]; } imr; @@ -561,7 +561,7 @@ static inline int sih_read_isr(const struct sih *sih) int status; union { u8 bytes[4]; - u32 word; + __le32 word; } isr; /* FIXME need retry-on-error ... */ diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 02f879b23d9f..b0344e5353e4 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -114,6 +114,8 @@ static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg) * The WM831x has a user key preventing writes to particularly * critical registers. This function locks those registers, * allowing writes to them. + * + * @wm831x: pointer to local driver data structure */ void wm831x_reg_lock(struct wm831x *wm831x) { @@ -140,6 +142,8 @@ EXPORT_SYMBOL_GPL(wm831x_reg_lock); * The WM831x has a user key preventing writes to particularly * critical registers. This function locks those registers, * preventing spurious writes. + * + * @wm831x: pointer to local driver data structure */ int wm831x_reg_unlock(struct wm831x *wm831x) { diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 42b16503e6cd..fbc77b218215 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -131,6 +131,8 @@ EXPORT_SYMBOL_GPL(wm8350_block_write); * The WM8350 has a hardware lock which can be used to prevent writes to * some registers (generally those which can cause particularly serious * problems if misused). This function enables that lock. + * + * @wm8350: pointer to local driver data structure */ int wm8350_reg_lock(struct wm8350 *wm8350) { @@ -160,6 +162,8 @@ EXPORT_SYMBOL_GPL(wm8350_reg_lock); * problems if misused). This function disables that lock so updates * can be performed. For maximum safety this should be done only when * required. + * + * @wm8350: pointer to local driver data structure */ int wm8350_reg_unlock(struct wm8350 *wm8350) { diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c index 3055d6f47afc..0fe32a05421b 100644 --- a/drivers/mfd/wm8400-core.c +++ b/drivers/mfd/wm8400-core.c @@ -108,6 +108,8 @@ static const struct regmap_config wm8400_regmap_config = { /** * wm8400_reset_codec_reg_cache - Reset cached codec registers to * their default values. + * + * @wm8400: pointer to local driver data structure */ void wm8400_reset_codec_reg_cache(struct wm8400 *wm8400) { diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index a2e710d46432..b668224f906d 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -499,4 +499,15 @@ config SPRD_THERMAL help Support for the Spreadtrum thermal sensor driver in the Linux thermal framework. + +config KHADAS_MCU_FAN_THERMAL + tristate "Khadas MCU controller FAN cooling support" + depends on OF || COMPILE_TEST + depends on MFD_KHADAS_MCU + select MFD_CORE + select REGMAP + help + If you say yes here you get support for the FAN controlled + by the Microcontroller found on the Khadas VIM boards. + endif diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index b8d96d26f9ec..b64dd50a6629 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -61,3 +61,4 @@ obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o obj-$(CONFIG_SPRD_THERMAL) += sprd_thermal.o +obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL) += khadas_mcu_fan.o diff --git a/drivers/thermal/khadas_mcu_fan.c b/drivers/thermal/khadas_mcu_fan.c new file mode 100644 index 000000000000..9eadd2d6413e --- /dev/null +++ b/drivers/thermal/khadas_mcu_fan.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Khadas MCU Controlled FAN driver + * + * Copyright (C) 2020 BayLibre SAS + * Author(s): Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/mfd/khadas-mcu.h> +#include <linux/regmap.h> +#include <linux/sysfs.h> +#include <linux/thermal.h> + +#define MAX_LEVEL 3 + +struct khadas_mcu_fan_ctx { + struct khadas_mcu *mcu; + unsigned int level; + struct thermal_cooling_device *cdev; +}; + +static int khadas_mcu_fan_set_level(struct khadas_mcu_fan_ctx *ctx, + unsigned int level) +{ + int ret; + + ret = regmap_write(ctx->mcu->regmap, KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG, + level); + if (ret) + return ret; + + ctx->level = level; + + return 0; +} + +static int khadas_mcu_fan_get_max_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + *state = MAX_LEVEL; + + return 0; +} + +static int khadas_mcu_fan_get_cur_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct khadas_mcu_fan_ctx *ctx = cdev->devdata; + + *state = ctx->level; + + return 0; +} + +static int +khadas_mcu_fan_set_cur_state(struct thermal_cooling_device *cdev, + unsigned long state) +{ + struct khadas_mcu_fan_ctx *ctx = cdev->devdata; + + if (state > MAX_LEVEL) + return -EINVAL; + + if (state == ctx->level) + return 0; + + return khadas_mcu_fan_set_level(ctx, state); +} + +static const struct thermal_cooling_device_ops khadas_mcu_fan_cooling_ops = { + .get_max_state = khadas_mcu_fan_get_max_state, + .get_cur_state = khadas_mcu_fan_get_cur_state, + .set_cur_state = khadas_mcu_fan_set_cur_state, +}; + +static int khadas_mcu_fan_probe(struct platform_device *pdev) +{ + struct khadas_mcu *mcu = dev_get_drvdata(pdev->dev.parent); + struct thermal_cooling_device *cdev; + struct device *dev = &pdev->dev; + struct khadas_mcu_fan_ctx *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + ctx->mcu = mcu; + platform_set_drvdata(pdev, ctx); + + cdev = devm_thermal_of_cooling_device_register(dev->parent, + dev->parent->of_node, "khadas-mcu-fan", ctx, + &khadas_mcu_fan_cooling_ops); + if (IS_ERR(cdev)) { + ret = PTR_ERR(cdev); + dev_err(dev, "Failed to register khadas-mcu-fan as cooling device: %d\n", + ret); + return ret; + } + ctx->cdev = cdev; + thermal_cdev_update(cdev); + + return 0; +} + +static void khadas_mcu_fan_shutdown(struct platform_device *pdev) +{ + struct khadas_mcu_fan_ctx *ctx = platform_get_drvdata(pdev); + + khadas_mcu_fan_set_level(ctx, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int khadas_mcu_fan_suspend(struct device *dev) +{ + struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev); + unsigned int level_save = ctx->level; + int ret; + + ret = khadas_mcu_fan_set_level(ctx, 0); + if (ret) + return ret; + + ctx->level = level_save; + + return 0; +} + +static int khadas_mcu_fan_resume(struct device *dev) +{ + struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev); + + return khadas_mcu_fan_set_level(ctx, ctx->level); +} +#endif + +static SIMPLE_DEV_PM_OPS(khadas_mcu_fan_pm, khadas_mcu_fan_suspend, + khadas_mcu_fan_resume); + +static const struct platform_device_id khadas_mcu_fan_id_table[] = { + { .name = "khadas-mcu-fan-ctrl", }, + {}, +}; +MODULE_DEVICE_TABLE(platform, khadas_mcu_fan_id_table); + +static struct platform_driver khadas_mcu_fan_driver = { + .probe = khadas_mcu_fan_probe, + .shutdown = khadas_mcu_fan_shutdown, + .driver = { + .name = "khadas-mcu-fan-ctrl", + .pm = &khadas_mcu_fan_pm, + }, + .id_table = khadas_mcu_fan_id_table, +}; + +module_platform_driver(khadas_mcu_fan_driver); + +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); +MODULE_DESCRIPTION("Khadas MCU FAN driver"); +MODULE_LICENSE("GPL"); |