diff options
Diffstat (limited to 'drivers/video/fbdev/omap2/dss/hdmi_phy.c')
| -rw-r--r-- | drivers/video/fbdev/omap2/dss/hdmi_phy.c | 160 |
1 files changed, 160 insertions, 0 deletions
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_phy.c b/drivers/video/fbdev/omap2/dss/hdmi_phy.c new file mode 100644 index 000000000000..dd376ce8da01 --- /dev/null +++ b/drivers/video/fbdev/omap2/dss/hdmi_phy.c @@ -0,0 +1,160 @@ +/* + * HDMI PHY + * + * Copyright (C) 2013 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <video/omapdss.h> + +#include "dss.h" +#include "hdmi.h" + +void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s) +{ +#define DUMPPHY(r) seq_printf(s, "%-35s %08x\n", #r,\ + hdmi_read_reg(phy->base, r)) + + DUMPPHY(HDMI_TXPHY_TX_CTRL); + DUMPPHY(HDMI_TXPHY_DIGITAL_CTRL); + DUMPPHY(HDMI_TXPHY_POWER_CTRL); + DUMPPHY(HDMI_TXPHY_PAD_CFG_CTRL); +} + +static irqreturn_t hdmi_irq_handler(int irq, void *data) +{ + struct hdmi_wp_data *wp = data; + u32 irqstatus; + + irqstatus = hdmi_wp_get_irqstatus(wp); + hdmi_wp_set_irqstatus(wp, irqstatus); + + if ((irqstatus & HDMI_IRQ_LINK_CONNECT) && + irqstatus & HDMI_IRQ_LINK_DISCONNECT) { + /* + * If we get both connect and disconnect interrupts at the same + * time, turn off the PHY, clear interrupts, and restart, which + * raises connect interrupt if a cable is connected, or nothing + * if cable is not connected. + */ + hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF); + + hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT | + HDMI_IRQ_LINK_DISCONNECT); + + hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON); + } else if (irqstatus & HDMI_IRQ_LINK_CONNECT) { + hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON); + } else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) { + hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON); + } + + return IRQ_HANDLED; +} + +int hdmi_phy_enable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp, + struct hdmi_config *cfg) +{ + u16 r = 0; + u32 irqstatus; + + hdmi_wp_clear_irqenable(wp, 0xffffffff); + + irqstatus = hdmi_wp_get_irqstatus(wp); + hdmi_wp_set_irqstatus(wp, irqstatus); + + r = hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON); + if (r) + return r; + + /* + * Read address 0 in order to get the SCP reset done completed + * Dummy access performed to make sure reset is done + */ + hdmi_read_reg(phy->base, HDMI_TXPHY_TX_CTRL); + + /* + * Write to phy address 0 to configure the clock + * use HFBITCLK write HDMI_TXPHY_TX_CONTROL_FREQOUT field + */ + REG_FLD_MOD(phy->base, HDMI_TXPHY_TX_CTRL, 0x1, 31, 30); + + /* Write to phy address 1 to start HDMI line (TXVALID and TMDSCLKEN) */ + hdmi_write_reg(phy->base, HDMI_TXPHY_DIGITAL_CTRL, 0xF0000000); + + /* Setup max LDO voltage */ + REG_FLD_MOD(phy->base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0); + + /* Write to phy address 3 to change the polarity control */ + REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27); + + r = request_threaded_irq(phy->irq, NULL, hdmi_irq_handler, + IRQF_ONESHOT, "OMAP HDMI", wp); + if (r) { + DSSERR("HDMI IRQ request failed\n"); + hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF); + return r; + } + + hdmi_wp_set_irqenable(wp, + HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT); + + return 0; +} + +void hdmi_phy_disable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp) +{ + free_irq(phy->irq, wp); + + hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF); +} + +#define PHY_OFFSET 0x300 +#define PHY_SIZE 0x100 + +int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy) +{ + struct resource *res; + struct resource temp_res; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy"); + if (!res) { + DSSDBG("can't get PHY mem resource by name\n"); + /* + * if hwmod/DT doesn't have the memory resource information + * split into HDMI sub blocks by name, we try again by getting + * the platform's first resource. this code will be removed when + * the driver can get the mem resources by name + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + DSSERR("can't get PHY mem resource\n"); + return -EINVAL; + } + + temp_res.start = res->start + PHY_OFFSET; + temp_res.end = temp_res.start + PHY_SIZE - 1; + res = &temp_res; + } + + phy->base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!phy->base) { + DSSERR("can't ioremap TX PHY\n"); + return -ENOMEM; + } + + phy->irq = platform_get_irq(pdev, 0); + if (phy->irq < 0) { + DSSERR("platform_get_irq failed\n"); + return -ENODEV; + } + + return 0; +} |