summaryrefslogtreecommitdiff
path: root/drivers/usb/core/hub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core/hub.c')
-rw-r--r--drivers/usb/core/hub.c122
1 files changed, 56 insertions, 66 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 3b7151687776..43cb2f2e3b43 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -127,7 +127,7 @@ static int usb_device_supports_lpm(struct usb_device *udev)
/* USB 2.1 (and greater) devices indicate LPM support through
* their USB 2.0 Extended Capabilities BOS descriptor.
*/
- if (udev->speed == USB_SPEED_HIGH) {
+ if (udev->speed == USB_SPEED_HIGH || udev->speed == USB_SPEED_FULL) {
if (udev->bos->ext_cap &&
(USB_LPM_SUPPORT &
le32_to_cpu(udev->bos->ext_cap->bmAttributes)))
@@ -795,7 +795,8 @@ int usb_hub_clear_tt_buffer(struct urb *urb)
* since each TT has "at least two" buffers that can need it (and
* there can be many TTs per hub). even if they're uncommon.
*/
- if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
+ clear = kmalloc(sizeof *clear, GFP_ATOMIC);
+ if (clear == NULL) {
dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
/* FIXME recover somehow ... RESET_TT? */
return -ENOMEM;
@@ -2350,6 +2351,26 @@ static void set_usb_port_removable(struct usb_device *udev)
hub = usb_hub_to_struct_hub(udev->parent);
+ /*
+ * If the platform firmware has provided information about a port,
+ * use that to determine whether it's removable.
+ */
+ switch (hub->ports[udev->portnum - 1]->connect_type) {
+ case USB_PORT_CONNECT_TYPE_HOT_PLUG:
+ udev->removable = USB_DEVICE_REMOVABLE;
+ return;
+ case USB_PORT_CONNECT_TYPE_HARD_WIRED:
+ case USB_PORT_NOT_USED:
+ udev->removable = USB_DEVICE_FIXED;
+ return;
+ default:
+ break;
+ }
+
+ /*
+ * Otherwise, check whether the hub knows whether a port is removable
+ * or not
+ */
wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
if (!(wHubCharacteristics & HUB_CHAR_COMPOUND))
@@ -2369,21 +2390,6 @@ static void set_usb_port_removable(struct usb_device *udev)
else
udev->removable = USB_DEVICE_FIXED;
- /*
- * Platform firmware may have populated an alternative value for
- * removable. If the parent port has a known connect_type use
- * that instead.
- */
- switch (hub->ports[udev->portnum - 1]->connect_type) {
- case USB_PORT_CONNECT_TYPE_HOT_PLUG:
- udev->removable = USB_DEVICE_REMOVABLE;
- break;
- case USB_PORT_CONNECT_TYPE_HARD_WIRED:
- udev->removable = USB_DEVICE_FIXED;
- break;
- default: /* use what was set above */
- break;
- }
}
/**
@@ -2616,9 +2622,6 @@ static bool use_new_scheme(struct usb_device *udev, int retry)
return USE_NEW_SCHEME(retry);
}
-static int hub_port_reset(struct usb_hub *hub, int port1,
- struct usb_device *udev, unsigned int delay, bool warm);
-
/* Is a USB 3.0 port in the Inactive or Compliance Mode state?
* Port worm reset is required to recover
*/
@@ -2706,44 +2709,6 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
return 0;
}
-static void hub_port_finish_reset(struct usb_hub *hub, int port1,
- struct usb_device *udev, int *status)
-{
- switch (*status) {
- case 0:
- /* TRSTRCY = 10 ms; plus some extra */
- msleep(10 + 40);
- if (udev) {
- struct usb_hcd *hcd = bus_to_hcd(udev->bus);
-
- update_devnum(udev, 0);
- /* The xHC may think the device is already reset,
- * so ignore the status.
- */
- if (hcd->driver->reset_device)
- hcd->driver->reset_device(hcd, udev);
- }
- /* FALL THROUGH */
- case -ENOTCONN:
- case -ENODEV:
- usb_clear_port_feature(hub->hdev,
- port1, USB_PORT_FEAT_C_RESET);
- if (hub_is_superspeed(hub->hdev)) {
- usb_clear_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_C_BH_PORT_RESET);
- usb_clear_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_C_PORT_LINK_STATE);
- usb_clear_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_C_CONNECTION);
- }
- if (udev)
- usb_set_device_state(udev, *status
- ? USB_STATE_NOTATTACHED
- : USB_STATE_DEFAULT);
- break;
- }
-}
-
/* Handle port reset and port warm(BH) reset (for USB3 protocol ports) */
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm)
@@ -2767,13 +2732,10 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
* If the caller hasn't explicitly requested a warm reset,
* double check and see if one is needed.
*/
- status = hub_port_status(hub, port1,
- &portstatus, &portchange);
- if (status < 0)
- goto done;
-
- if (hub_port_warm_reset_required(hub, port1, portstatus))
- warm = true;
+ if (hub_port_status(hub, port1, &portstatus, &portchange) == 0)
+ if (hub_port_warm_reset_required(hub, port1,
+ portstatus))
+ warm = true;
}
clear_bit(port1, hub->warm_reset_bits);
@@ -2799,11 +2761,19 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
/* Check for disconnect or reset */
if (status == 0 || status == -ENOTCONN || status == -ENODEV) {
- hub_port_finish_reset(hub, port1, udev, &status);
+ usb_clear_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_C_RESET);
if (!hub_is_superspeed(hub->hdev))
goto done;
+ usb_clear_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_C_BH_PORT_RESET);
+ usb_clear_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_C_PORT_LINK_STATE);
+ usb_clear_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_C_CONNECTION);
+
/*
* If a USB 3.0 device migrates from reset to an error
* state, re-issue the warm reset.
@@ -2836,6 +2806,26 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
dev_err(&port_dev->dev, "Cannot enable. Maybe the USB cable is bad?\n");
done:
+ if (status == 0) {
+ /* TRSTRCY = 10 ms; plus some extra */
+ msleep(10 + 40);
+ if (udev) {
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+ update_devnum(udev, 0);
+ /* The xHC may think the device is already reset,
+ * so ignore the status.
+ */
+ if (hcd->driver->reset_device)
+ hcd->driver->reset_device(hcd, udev);
+
+ usb_set_device_state(udev, USB_STATE_DEFAULT);
+ }
+ } else {
+ if (udev)
+ usb_set_device_state(udev, USB_STATE_NOTATTACHED);
+ }
+
if (!hub_is_superspeed(hub->hdev))
up_read(&ehci_cf_port_reset_rwsem);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 23:03:06 +0000