diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/serial/ar933x_uart.c | 24 | ||||
-rw-r--r-- | drivers/tty/serial/atmel_serial.c | 52 | ||||
-rw-r--r-- | drivers/tty/serial/kgdboc.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/max310x.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/mvebu-uart.c | 3 | ||||
-rw-r--r-- | drivers/tty/serial/mxs-auart.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/qcom_geni_serial.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/sc16is7xx.c | 12 | ||||
-rw-r--r-- | drivers/tty/serial/sh-sci.c | 12 | ||||
-rw-r--r-- | drivers/tty/tty_port.c | 10 |
10 files changed, 74 insertions, 51 deletions
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index db5df3d54818..3bdd56a1021b 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -49,11 +49,6 @@ struct ar933x_uart_port { struct clk *clk; }; -static inline bool ar933x_uart_console_enabled(void) -{ - return IS_ENABLED(CONFIG_SERIAL_AR933X_CONSOLE); -} - static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, int offset) { @@ -508,6 +503,7 @@ static const struct uart_ops ar933x_uart_ops = { .verify_port = ar933x_uart_verify_port, }; +#ifdef CONFIG_SERIAL_AR933X_CONSOLE static struct ar933x_uart_port * ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS]; @@ -604,14 +600,7 @@ static struct console ar933x_uart_console = { .index = -1, .data = &ar933x_uart_driver, }; - -static void ar933x_uart_add_console_port(struct ar933x_uart_port *up) -{ - if (!ar933x_uart_console_enabled()) - return; - - ar933x_console_ports[up->port.line] = up; -} +#endif /* CONFIG_SERIAL_AR933X_CONSOLE */ static struct uart_driver ar933x_uart_driver = { .owner = THIS_MODULE, @@ -700,7 +689,9 @@ static int ar933x_uart_probe(struct platform_device *pdev) baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP); up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD); - ar933x_uart_add_console_port(up); +#ifdef CONFIG_SERIAL_AR933X_CONSOLE + ar933x_console_ports[up->port.line] = up; +#endif ret = uart_add_one_port(&ar933x_uart_driver, &up->port); if (ret) @@ -749,8 +740,9 @@ static int __init ar933x_uart_init(void) { int ret; - if (ar933x_uart_console_enabled()) - ar933x_uart_driver.cons = &ar933x_uart_console; +#ifdef CONFIG_SERIAL_AR933X_CONSOLE + ar933x_uart_driver.cons = &ar933x_uart_console; +#endif ret = uart_register_driver(&ar933x_uart_driver); if (ret) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 05147fe24343..0b4f36905321 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -166,6 +166,8 @@ struct atmel_uart_port { unsigned int pending_status; spinlock_t lock_suspended; + bool hd_start_rx; /* can start RX during half-duplex operation */ + /* ISO7816 */ unsigned int fidi_min; unsigned int fidi_max; @@ -231,6 +233,13 @@ static inline void atmel_uart_write_char(struct uart_port *port, u8 value) __raw_writeb(value, port->membase + ATMEL_US_THR); } +static inline int atmel_uart_is_half_duplex(struct uart_port *port) +{ + return ((port->rs485.flags & SER_RS485_ENABLED) && + !(port->rs485.flags & SER_RS485_RX_DURING_TX)) || + (port->iso7816.flags & SER_ISO7816_ENABLED); +} + #ifdef CONFIG_SERIAL_ATMEL_PDC static bool atmel_use_pdc_rx(struct uart_port *port) { @@ -608,10 +617,9 @@ static void atmel_stop_tx(struct uart_port *port) /* Disable interrupts */ atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); - if (((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) || - port->iso7816.flags & SER_ISO7816_ENABLED) + if (atmel_uart_is_half_duplex(port)) atmel_start_rx(port); + } /* @@ -628,9 +636,7 @@ static void atmel_start_tx(struct uart_port *port) return; if (atmel_use_pdc_tx(port) || atmel_use_dma_tx(port)) - if (((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) || - port->iso7816.flags & SER_ISO7816_ENABLED) + if (atmel_uart_is_half_duplex(port)) atmel_stop_rx(port); if (atmel_use_pdc_tx(port)) @@ -928,11 +934,14 @@ static void atmel_complete_tx_dma(void *arg) */ if (!uart_circ_empty(xmit)) atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); - else if (((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) || - port->iso7816.flags & SER_ISO7816_ENABLED) { - /* DMA done, stop TX, start RX for RS485 */ - atmel_start_rx(port); + else if (atmel_uart_is_half_duplex(port)) { + /* + * DMA done, re-enable TXEMPTY and signal that we can stop + * TX and start RX for RS485 + */ + atmel_port->hd_start_rx = true; + atmel_uart_writel(port, ATMEL_US_IER, + atmel_port->tx_done_mask); } spin_unlock_irqrestore(&port->lock, flags); @@ -1288,6 +1297,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port) sg_dma_len(&atmel_port->sg_rx)/2, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(port->dev, "Preparing DMA cyclic failed\n"); + goto chan_err; + } desc->callback = atmel_complete_rx_dma; desc->callback_param = port; atmel_port->desc_rx = desc; @@ -1376,9 +1389,20 @@ atmel_handle_transmit(struct uart_port *port, unsigned int pending) struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); if (pending & atmel_port->tx_done_mask) { - /* Either PDC or interrupt transmission */ atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask); + + /* Start RX if flag was set and FIFO is empty */ + if (atmel_port->hd_start_rx) { + if (!(atmel_uart_readl(port, ATMEL_US_CSR) + & ATMEL_US_TXEMPTY)) + dev_warn(port->dev, "Should start RX, but TX fifo is not empty\n"); + + atmel_port->hd_start_rx = false; + atmel_start_rx(port); + return; + } + atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx); } } @@ -1508,9 +1532,7 @@ static void atmel_tx_pdc(struct uart_port *port) atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask); } else { - if (((port->rs485.flags & SER_RS485_ENABLED) && - !(port->rs485.flags & SER_RS485_RX_DURING_TX)) || - port->iso7816.flags & SER_ISO7816_ENABLED) { + if (atmel_uart_is_half_duplex(port)) { /* DMA done, stop TX, start RX for RS485 */ atmel_start_rx(port); } diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c index 6fb312e7af71..bfe5e9e034ec 100644 --- a/drivers/tty/serial/kgdboc.c +++ b/drivers/tty/serial/kgdboc.c @@ -148,8 +148,10 @@ static int configure_kgdboc(void) char *cptr = config; struct console *cons; - if (!strlen(config) || isspace(config[0])) + if (!strlen(config) || isspace(config[0])) { + err = 0; goto noconfig; + } kgdboc_io_ops.is_console = 0; kgdb_tty_driver = NULL; diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index f5bdde405627..450ba6d7996c 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1415,6 +1415,8 @@ static int max310x_spi_probe(struct spi_device *spi) if (spi->dev.of_node) { const struct of_device_id *of_id = of_match_device(max310x_dt_ids, &spi->dev); + if (!of_id) + return -ENODEV; devtype = (struct max310x_devtype *)of_id->data; } else { diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c index 231f751d1ef4..7e7b1559fa36 100644 --- a/drivers/tty/serial/mvebu-uart.c +++ b/drivers/tty/serial/mvebu-uart.c @@ -810,6 +810,9 @@ static int mvebu_uart_probe(struct platform_device *pdev) return -EINVAL; } + if (!match) + return -ENODEV; + /* Assume that all UART ports have a DT alias or none has */ id = of_alias_get_id(pdev->dev.of_node, "serial"); if (!pdev->dev.of_node || id < 0) diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 27235a526cce..4c188f4079b3 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1686,6 +1686,10 @@ static int mxs_auart_probe(struct platform_device *pdev) s->port.mapbase = r->start; s->port.membase = ioremap(r->start, resource_size(r)); + if (!s->port.membase) { + ret = -ENOMEM; + goto out_disable_clks; + } s->port.ops = &mxs_auart_ops; s->port.iotype = UPIO_MEM; s->port.fifosize = MXS_AUART_FIFO_SIZE; diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 3bcec1c20219..35e5f9c5d5be 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -1050,7 +1050,7 @@ static int __init qcom_geni_console_setup(struct console *co, char *options) { struct uart_port *uport; struct qcom_geni_serial_port *port; - int baud; + int baud = 9600; int bits = 8; int parity = 'n'; int flow = 'n'; diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 635178cf3eed..09a183dfc526 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1507,7 +1507,7 @@ static int __init sc16is7xx_init(void) ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver); if (ret < 0) { pr_err("failed to init sc16is7xx i2c --> %d\n", ret); - return ret; + goto err_i2c; } #endif @@ -1515,10 +1515,18 @@ static int __init sc16is7xx_init(void) ret = spi_register_driver(&sc16is7xx_spi_uart_driver); if (ret < 0) { pr_err("failed to init sc16is7xx spi --> %d\n", ret); - return ret; + goto err_spi; } #endif return ret; + +err_spi: +#ifdef CONFIG_SERIAL_SC16IS7XX_I2C + i2c_del_driver(&sc16is7xx_i2c_uart_driver); +#endif +err_i2c: + uart_unregister_driver(&sc16is7xx_uart); + return ret; } module_init(sc16is7xx_init); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 060fcd42b6d5..2d1c626312cd 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -838,19 +838,9 @@ static void sci_transmit_chars(struct uart_port *port) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); - if (uart_circ_empty(xmit)) { + if (uart_circ_empty(xmit)) sci_stop_tx(port); - } else { - ctrl = serial_port_in(port, SCSCR); - - if (port->type != PORT_SCI) { - serial_port_in(port, SCxSR); /* Dummy read */ - sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port)); - } - ctrl |= SCSCR_TIE; - serial_port_out(port, SCSCR, ctrl); - } } /* On SH3, SCIF may read end-of-break as a space->mark char */ diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 044c3cbdcfa4..a9e12b3bc31d 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -325,7 +325,7 @@ static void tty_port_shutdown(struct tty_port *port, struct tty_struct *tty) if (tty && C_HUPCL(tty)) tty_port_lower_dtr_rts(port); - if (port->ops->shutdown) + if (port->ops && port->ops->shutdown) port->ops->shutdown(port); } out: @@ -398,7 +398,7 @@ EXPORT_SYMBOL_GPL(tty_port_tty_wakeup); */ int tty_port_carrier_raised(struct tty_port *port) { - if (port->ops->carrier_raised == NULL) + if (!port->ops || !port->ops->carrier_raised) return 1; return port->ops->carrier_raised(port); } @@ -414,7 +414,7 @@ EXPORT_SYMBOL(tty_port_carrier_raised); */ void tty_port_raise_dtr_rts(struct tty_port *port) { - if (port->ops->dtr_rts) + if (port->ops && port->ops->dtr_rts) port->ops->dtr_rts(port, 1); } EXPORT_SYMBOL(tty_port_raise_dtr_rts); @@ -429,7 +429,7 @@ EXPORT_SYMBOL(tty_port_raise_dtr_rts); */ void tty_port_lower_dtr_rts(struct tty_port *port) { - if (port->ops->dtr_rts) + if (port->ops && port->ops->dtr_rts) port->ops->dtr_rts(port, 0); } EXPORT_SYMBOL(tty_port_lower_dtr_rts); @@ -684,7 +684,7 @@ int tty_port_open(struct tty_port *port, struct tty_struct *tty, if (!tty_port_initialized(port)) { clear_bit(TTY_IO_ERROR, &tty->flags); - if (port->ops->activate) { + if (port->ops && port->ops->activate) { int retval = port->ops->activate(port, tty); if (retval) { mutex_unlock(&port->mutex); |