diff options
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/Kconfig | 4 | ||||
-rw-r--r-- | drivers/regulator/mt6397-regulator.c | 95 | ||||
-rw-r--r-- | drivers/regulator/of_regulator.c | 3 | ||||
-rw-r--r-- | drivers/regulator/pfuze100-regulator.c | 15 | ||||
-rw-r--r-- | drivers/regulator/pwm-regulator.c | 40 | ||||
-rw-r--r-- | drivers/regulator/qcom_smd-regulator.c | 3 |
6 files changed, 129 insertions, 31 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 53b30b46c1c5..c09c2b654536 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -552,12 +552,12 @@ config REGULATOR_PCF50633 on PCF50633 config REGULATOR_PFUZE100 - tristate "Freescale PFUZE100/PFUZE200 regulator driver" + tristate "Freescale PFUZE100/200/3000 regulator driver" depends on I2C select REGMAP_I2C help Say y here to support the regulators found on the Freescale - PFUZE100/PFUZE200 PMIC. + PFUZE100/200/3000 PMIC. config REGULATOR_PV88060 tristate "Powerventure Semiconductor PV88060 regulator" diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c index 17a5b6c2d6a9..c6c6aa85e4e8 100644 --- a/drivers/regulator/mt6397-regulator.c +++ b/drivers/regulator/mt6397-regulator.c @@ -23,6 +23,9 @@ #include <linux/regulator/mt6397-regulator.h> #include <linux/regulator/of_regulator.h> +#define MT6397_BUCK_MODE_AUTO 0 +#define MT6397_BUCK_MODE_FORCE_PWM 1 + /* * MT6397 regulators' information * @@ -38,10 +41,14 @@ struct mt6397_regulator_info { u32 vselon_reg; u32 vselctrl_reg; u32 vselctrl_mask; + u32 modeset_reg; + u32 modeset_mask; + u32 modeset_shift; }; #define MT6397_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ - vosel, vosel_mask, voselon, vosel_ctrl) \ + vosel, vosel_mask, voselon, vosel_ctrl, _modeset_reg, \ + _modeset_shift) \ [MT6397_ID_##vreg] = { \ .desc = { \ .name = #vreg, \ @@ -62,6 +69,9 @@ struct mt6397_regulator_info { .vselon_reg = voselon, \ .vselctrl_reg = vosel_ctrl, \ .vselctrl_mask = BIT(1), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = BIT(_modeset_shift), \ + .modeset_shift = _modeset_shift \ } #define MT6397_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ @@ -145,6 +155,63 @@ static const u32 ldo_volt_table7[] = { 1300000, 1500000, 1800000, 2000000, 2500000, 2800000, 3000000, 3300000, }; +static int mt6397_regulator_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct mt6397_regulator_info *info = rdev_get_drvdata(rdev); + int ret, val; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = MT6397_BUCK_MODE_FORCE_PWM; + break; + case REGULATOR_MODE_NORMAL: + val = MT6397_BUCK_MODE_AUTO; + break; + default: + ret = -EINVAL; + goto err_mode; + } + + dev_dbg(&rdev->dev, "mt6397 buck set_mode %#x, %#x, %#x, %#x\n", + info->modeset_reg, info->modeset_mask, + info->modeset_shift, val); + + val <<= info->modeset_shift; + ret = regmap_update_bits(rdev->regmap, info->modeset_reg, + info->modeset_mask, val); +err_mode: + if (ret != 0) { + dev_err(&rdev->dev, + "Failed to set mt6397 buck mode: %d\n", ret); + return ret; + } + + return 0; +} + +static unsigned int mt6397_regulator_get_mode(struct regulator_dev *rdev) +{ + struct mt6397_regulator_info *info = rdev_get_drvdata(rdev); + int ret, regval; + + ret = regmap_read(rdev->regmap, info->modeset_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, + "Failed to get mt6397 buck mode: %d\n", ret); + return ret; + } + + switch ((regval & info->modeset_mask) >> info->modeset_shift) { + case MT6397_BUCK_MODE_AUTO: + return REGULATOR_MODE_NORMAL; + case MT6397_BUCK_MODE_FORCE_PWM: + return REGULATOR_MODE_FAST; + default: + return -EINVAL; + } +} + static int mt6397_get_status(struct regulator_dev *rdev) { int ret; @@ -160,7 +227,7 @@ static int mt6397_get_status(struct regulator_dev *rdev) return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; } -static struct regulator_ops mt6397_volt_range_ops = { +static const struct regulator_ops mt6397_volt_range_ops = { .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, .set_voltage_sel = regulator_set_voltage_sel_regmap, @@ -170,9 +237,11 @@ static struct regulator_ops mt6397_volt_range_ops = { .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .get_status = mt6397_get_status, + .set_mode = mt6397_regulator_set_mode, + .get_mode = mt6397_regulator_get_mode, }; -static struct regulator_ops mt6397_volt_table_ops = { +static const struct regulator_ops mt6397_volt_table_ops = { .list_voltage = regulator_list_voltage_table, .map_voltage = regulator_map_voltage_iterate, .set_voltage_sel = regulator_set_voltage_sel_regmap, @@ -184,7 +253,7 @@ static struct regulator_ops mt6397_volt_table_ops = { .get_status = mt6397_get_status, }; -static struct regulator_ops mt6397_volt_fixed_ops = { +static const struct regulator_ops mt6397_volt_fixed_ops = { .list_voltage = regulator_list_voltage_linear, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -196,28 +265,30 @@ static struct regulator_ops mt6397_volt_fixed_ops = { static struct mt6397_regulator_info mt6397_regulators[] = { MT6397_BUCK("buck_vpca15", VPCA15, 700000, 1493750, 6250, buck_volt_range1, MT6397_VCA15_CON7, MT6397_VCA15_CON9, 0x7f, - MT6397_VCA15_CON10, MT6397_VCA15_CON5), + MT6397_VCA15_CON10, MT6397_VCA15_CON5, MT6397_VCA15_CON2, 11), MT6397_BUCK("buck_vpca7", VPCA7, 700000, 1493750, 6250, buck_volt_range1, MT6397_VPCA7_CON7, MT6397_VPCA7_CON9, 0x7f, - MT6397_VPCA7_CON10, MT6397_VPCA7_CON5), + MT6397_VPCA7_CON10, MT6397_VPCA7_CON5, MT6397_VPCA7_CON2, 8), MT6397_BUCK("buck_vsramca15", VSRAMCA15, 700000, 1493750, 6250, buck_volt_range1, MT6397_VSRMCA15_CON7, MT6397_VSRMCA15_CON9, - 0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5), + 0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5, + MT6397_VSRMCA15_CON2, 8), MT6397_BUCK("buck_vsramca7", VSRAMCA7, 700000, 1493750, 6250, buck_volt_range1, MT6397_VSRMCA7_CON7, MT6397_VSRMCA7_CON9, - 0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5), + 0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5, + MT6397_VSRMCA7_CON2, 8), MT6397_BUCK("buck_vcore", VCORE, 700000, 1493750, 6250, buck_volt_range1, MT6397_VCORE_CON7, MT6397_VCORE_CON9, 0x7f, - MT6397_VCORE_CON10, MT6397_VCORE_CON5), + MT6397_VCORE_CON10, MT6397_VCORE_CON5, MT6397_VCORE_CON2, 8), MT6397_BUCK("buck_vgpu", VGPU, 700000, 1493750, 6250, buck_volt_range1, MT6397_VGPU_CON7, MT6397_VGPU_CON9, 0x7f, - MT6397_VGPU_CON10, MT6397_VGPU_CON5), + MT6397_VGPU_CON10, MT6397_VGPU_CON5, MT6397_VGPU_CON2, 8), MT6397_BUCK("buck_vdrm", VDRM, 800000, 1593750, 6250, buck_volt_range2, MT6397_VDRM_CON7, MT6397_VDRM_CON9, 0x7f, - MT6397_VDRM_CON10, MT6397_VDRM_CON5), + MT6397_VDRM_CON10, MT6397_VDRM_CON5, MT6397_VDRM_CON2, 8), MT6397_BUCK("buck_vio18", VIO18, 1500000, 2120000, 20000, buck_volt_range3, MT6397_VIO18_CON7, MT6397_VIO18_CON9, 0x1f, - MT6397_VIO18_CON10, MT6397_VIO18_CON5), + MT6397_VIO18_CON10, MT6397_VIO18_CON5, MT6397_VIO18_CON2, 8), MT6397_REG_FIXED("ldo_vtcxo", VTCXO, MT6397_ANALDO_CON0, 10, 2800000), MT6397_REG_FIXED("ldo_va28", VA28, MT6397_ANALDO_CON1, 14, 2800000), MT6397_LDO("ldo_vcama", VCAMA, ldo_volt_table1, diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index cd828dbf9d52..4f613ec99500 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -163,6 +163,9 @@ static void of_get_regulation_constraints(struct device_node *np, "regulator-suspend-microvolt", &pval)) suspend_state->uV = pval; + if (i == PM_SUSPEND_MEM) + constraints->initial_state = PM_SUSPEND_MEM; + of_node_put(suspend_np); suspend_state = NULL; suspend_np = NULL; diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 2a44e5dd9c2a..cb18b5c4f2db 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -70,6 +70,7 @@ struct pfuze_chip { struct device *dev; struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR]; struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR]; + struct pfuze_regulator *pfuze_regulators; }; static const int pfuze100_swbst[] = { @@ -334,8 +335,6 @@ static struct pfuze_regulator pfuze3000_regulators[] = { PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), }; -static struct pfuze_regulator *pfuze_regulators; - #ifdef CONFIG_OF /* PFUZE100 */ static struct of_regulator_match pfuze100_matches[] = { @@ -563,21 +562,21 @@ static int pfuze100_regulator_probe(struct i2c_client *client, /* use the right regulators after identify the right device */ switch (pfuze_chip->chip_id) { case PFUZE3000: - pfuze_regulators = pfuze3000_regulators; + pfuze_chip->pfuze_regulators = pfuze3000_regulators; regulator_num = ARRAY_SIZE(pfuze3000_regulators); sw_check_start = PFUZE3000_SW2; sw_check_end = PFUZE3000_SW2; sw_hi = 1 << 3; break; case PFUZE200: - pfuze_regulators = pfuze200_regulators; + pfuze_chip->pfuze_regulators = pfuze200_regulators; regulator_num = ARRAY_SIZE(pfuze200_regulators); sw_check_start = PFUZE200_SW2; sw_check_end = PFUZE200_SW3B; break; case PFUZE100: default: - pfuze_regulators = pfuze100_regulators; + pfuze_chip->pfuze_regulators = pfuze100_regulators; regulator_num = ARRAY_SIZE(pfuze100_regulators); sw_check_start = PFUZE100_SW2; sw_check_end = PFUZE100_SW4; @@ -587,7 +586,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, (pfuze_chip->chip_id == PFUZE100) ? "100" : ((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000")); - memcpy(pfuze_chip->regulator_descs, pfuze_regulators, + memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators, sizeof(pfuze_chip->regulator_descs)); ret = pfuze_parse_regulators_dt(pfuze_chip); @@ -631,7 +630,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, devm_regulator_register(&client->dev, desc, &config); if (IS_ERR(pfuze_chip->regulators[i])) { dev_err(&client->dev, "register regulator%s failed\n", - pfuze_regulators[i].desc.name); + pfuze_chip->pfuze_regulators[i].desc.name); return PTR_ERR(pfuze_chip->regulators[i]); } } @@ -650,5 +649,5 @@ static struct i2c_driver pfuze_driver = { module_i2c_driver(pfuze_driver); MODULE_AUTHOR("Robin Gong <b38343@freescale.com>"); -MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/PFUZE200 PMIC"); +MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000 PMIC"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index fafa3488e960..666bc3bb52ef 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -20,6 +20,7 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/pwm.h> +#include <linux/gpio/consumer.h> struct pwm_regulator_data { /* Shared */ @@ -38,6 +39,9 @@ struct pwm_regulator_data { /* Continuous voltage */ int volt_uV; + + /* Enable GPIO */ + struct gpio_desc *enb_gpio; }; struct pwm_voltages { @@ -94,6 +98,9 @@ static int pwm_regulator_enable(struct regulator_dev *dev) { struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + if (drvdata->enb_gpio) + gpiod_set_value_cansleep(drvdata->enb_gpio, 1); + return pwm_enable(drvdata->pwm); } @@ -103,6 +110,9 @@ static int pwm_regulator_disable(struct regulator_dev *dev) pwm_disable(drvdata->pwm); + if (drvdata->enb_gpio) + gpiod_set_value_cansleep(drvdata->enb_gpio, 0); + return 0; } @@ -110,6 +120,9 @@ static int pwm_regulator_is_enabled(struct regulator_dev *dev) { struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev); + if (drvdata->enb_gpio && !gpiod_get_value_cansleep(drvdata->enb_gpio)) + return false; + return pwm_is_enabled(drvdata->pwm); } @@ -132,6 +145,7 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev, unsigned int duty_pulse; u64 req_period; u32 rem; + int old_uV = pwm_regulator_get_voltage(rdev); int ret; pwm_get_args(drvdata->pwm, &pargs); @@ -159,15 +173,14 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev, return ret; } - ret = pwm_enable(drvdata->pwm); - if (ret) { - dev_err(&rdev->dev, "Failed to enable PWM: %d\n", ret); - return ret; - } drvdata->volt_uV = min_uV; - /* Delay required by PWM regulator to settle to the new voltage */ - usleep_range(ramp_delay, ramp_delay + 1000); + if ((ramp_delay == 0) || !pwm_regulator_is_enabled(rdev)) + return 0; + + /* Ramp delay is in uV/uS. Adjust to uS and delay */ + ramp_delay = DIV_ROUND_UP(abs(min_uV - old_uV), ramp_delay); + usleep_range(ramp_delay, ramp_delay + DIV_ROUND_UP(ramp_delay, 10)); return 0; } @@ -253,6 +266,7 @@ static int pwm_regulator_probe(struct platform_device *pdev) struct regulator_dev *regulator; struct regulator_config config = { }; struct device_node *np = pdev->dev.of_node; + enum gpiod_flags gpio_flags; int ret; if (!np) { @@ -290,6 +304,18 @@ static int pwm_regulator_probe(struct platform_device *pdev) return ret; } + if (init_data->constraints.boot_on || init_data->constraints.always_on) + gpio_flags = GPIOD_OUT_HIGH; + else + gpio_flags = GPIOD_OUT_LOW; + drvdata->enb_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", + gpio_flags); + if (IS_ERR(drvdata->enb_gpio)) { + ret = PTR_ERR(drvdata->enb_gpio); + dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n", ret); + return ret; + } + /* * FIXME: pwm_apply_args() should be removed when switching to the * atomic PWM API. diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 526bf23dcb49..5022fa8d10c6 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -152,7 +152,6 @@ static const struct regulator_ops rpm_smps_ldo_ops_fixed = { .enable = rpm_reg_enable, .disable = rpm_reg_disable, .is_enabled = rpm_reg_is_enabled, - .list_voltage = regulator_list_voltage_linear_range, .get_voltage = rpm_reg_get_voltage, .set_voltage = rpm_reg_set_voltage, @@ -212,7 +211,7 @@ static const struct regulator_desc pma8084_switch = { static const struct regulator_desc pm8x41_hfsmps = { .linear_ranges = (struct regulator_linear_range[]) { REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500), - REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000), + REGULATOR_LINEAR_RANGE(1575000, 96, 158, 25000), }, .n_linear_ranges = 2, .n_voltages = 159, |