diff options
Diffstat (limited to 'drivers/platform/x86/meraki-mx100.c')
| -rw-r--r-- | drivers/platform/x86/meraki-mx100.c | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/drivers/platform/x86/meraki-mx100.c b/drivers/platform/x86/meraki-mx100.c new file mode 100644 index 000000000000..3751ed36a980 --- /dev/null +++ b/drivers/platform/x86/meraki-mx100.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/* + * Cisco Meraki MX100 (Tinkerbell) board platform driver + * + * Based off of arch/x86/platform/meraki/tink.c from the + * Meraki GPL release meraki-firmware-sources-r23-20150601 + * + * Format inspired by platform/x86/pcengines-apuv2.c + * + * Copyright (C) 2021 Chris Blake <chrisrblake93@gmail.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/dmi.h> +#include <linux/err.h> +#include <linux/gpio_keys.h> +#include <linux/gpio/machine.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#define TINK_GPIO_DRIVER_NAME "gpio_ich" + +/* LEDs */ +static const struct gpio_led tink_leds[] = { + { + .name = "mx100:green:internet", + .default_trigger = "default-on", + }, + { + .name = "mx100:green:lan2", + }, + { + .name = "mx100:green:lan3", + }, + { + .name = "mx100:green:lan4", + }, + { + .name = "mx100:green:lan5", + }, + { + .name = "mx100:green:lan6", + }, + { + .name = "mx100:green:lan7", + }, + { + .name = "mx100:green:lan8", + }, + { + .name = "mx100:green:lan9", + }, + { + .name = "mx100:green:lan10", + }, + { + .name = "mx100:green:lan11", + }, + { + .name = "mx100:green:ha", + }, + { + .name = "mx100:orange:ha", + }, + { + .name = "mx100:green:usb", + }, + { + .name = "mx100:orange:usb", + }, +}; + +static const struct gpio_led_platform_data tink_leds_pdata = { + .num_leds = ARRAY_SIZE(tink_leds), + .leds = tink_leds, +}; + +static struct gpiod_lookup_table tink_leds_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 11, + NULL, 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 18, + NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 20, + NULL, 2, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 22, + NULL, 3, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 23, + NULL, 4, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 32, + NULL, 5, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 34, + NULL, 6, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 35, + NULL, 7, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 36, + NULL, 8, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 37, + NULL, 9, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 48, + NULL, 10, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 16, + NULL, 11, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 7, + NULL, 12, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 21, + NULL, 13, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 19, + NULL, 14, GPIO_ACTIVE_LOW), + {} /* Terminating entry */ + } +}; + +/* Reset Button */ +static struct gpio_keys_button tink_buttons[] = { + { + .desc = "Reset", + .type = EV_KEY, + .code = KEY_RESTART, + .active_low = 1, + .debounce_interval = 100, + }, +}; + +static const struct gpio_keys_platform_data tink_buttons_pdata = { + .buttons = tink_buttons, + .nbuttons = ARRAY_SIZE(tink_buttons), + .poll_interval = 20, + .rep = 0, + .name = "mx100-keys", +}; + +static struct gpiod_lookup_table tink_keys_table = { + .dev_id = "gpio-keys-polled", + .table = { + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 60, + NULL, 0, GPIO_ACTIVE_LOW), + {} /* Terminating entry */ + } +}; + +/* Board setup */ +static const struct dmi_system_id tink_systems[] __initconst = { + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Cisco"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MX100-HW"), + }, + }, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(dmi, tink_systems); + +static struct platform_device *tink_leds_pdev; +static struct platform_device *tink_keys_pdev; + +static struct platform_device * __init tink_create_dev( + const char *name, const void *pdata, size_t sz) +{ + struct platform_device *pdev; + + pdev = platform_device_register_data(NULL, + name, PLATFORM_DEVID_NONE, pdata, sz); + if (IS_ERR(pdev)) + pr_err("failed registering %s: %ld\n", name, PTR_ERR(pdev)); + + return pdev; +} + +static int __init tink_board_init(void) +{ + int ret; + + if (!dmi_first_match(tink_systems)) + return -ENODEV; + + /* + * We need to make sure that GPIO60 isn't set to native mode as is default since it's our + * Reset Button. To do this, write to GPIO_USE_SEL2 to have GPIO60 set to GPIO mode. + * This is documented on page 1609 of the PCH datasheet, order number 327879-005US + */ + outl(inl(0x530) | BIT(28), 0x530); + + gpiod_add_lookup_table(&tink_leds_table); + gpiod_add_lookup_table(&tink_keys_table); + + tink_leds_pdev = tink_create_dev("leds-gpio", + &tink_leds_pdata, sizeof(tink_leds_pdata)); + if (IS_ERR(tink_leds_pdev)) { + ret = PTR_ERR(tink_leds_pdev); + goto err; + } + + tink_keys_pdev = tink_create_dev("gpio-keys-polled", + &tink_buttons_pdata, sizeof(tink_buttons_pdata)); + if (IS_ERR(tink_keys_pdev)) { + ret = PTR_ERR(tink_keys_pdev); + platform_device_unregister(tink_leds_pdev); + goto err; + } + + return 0; + +err: + gpiod_remove_lookup_table(&tink_keys_table); + gpiod_remove_lookup_table(&tink_leds_table); + return ret; +} +module_init(tink_board_init); + +static void __exit tink_board_exit(void) +{ + platform_device_unregister(tink_keys_pdev); + platform_device_unregister(tink_leds_pdev); + gpiod_remove_lookup_table(&tink_keys_table); + gpiod_remove_lookup_table(&tink_leds_table); +} +module_exit(tink_board_exit); + +MODULE_AUTHOR("Chris Blake <chrisrblake93@gmail.com>"); +MODULE_DESCRIPTION("Cisco Meraki MX100 Platform Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:meraki-mx100"); |