diff options
Diffstat (limited to 'drivers/net/ethernet/aurora/nb8800.h')
-rw-r--r-- | drivers/net/ethernet/aurora/nb8800.h | 316 |
1 files changed, 316 insertions, 0 deletions
diff --git a/drivers/net/ethernet/aurora/nb8800.h b/drivers/net/ethernet/aurora/nb8800.h new file mode 100644 index 000000000000..e5adbc2aac9f --- /dev/null +++ b/drivers/net/ethernet/aurora/nb8800.h @@ -0,0 +1,316 @@ +#ifndef _NB8800_H_ +#define _NB8800_H_ + +#include <linux/types.h> +#include <linux/skbuff.h> +#include <linux/phy.h> +#include <linux/clk.h> +#include <linux/bitops.h> + +#define RX_DESC_COUNT 256 +#define TX_DESC_COUNT 256 + +#define NB8800_DESC_LOW 4 + +#define RX_BUF_SIZE 1552 + +#define RX_COPYBREAK 256 +#define RX_COPYHDR 128 + +#define MAX_MDC_CLOCK 2500000 + +/* Stargate Solutions SSN8800 core registers */ +#define NB8800_TX_CTL1 0x000 +#define TX_TPD BIT(5) +#define TX_APPEND_FCS BIT(4) +#define TX_PAD_EN BIT(3) +#define TX_RETRY_EN BIT(2) +#define TX_EN BIT(0) + +#define NB8800_TX_CTL2 0x001 + +#define NB8800_RX_CTL 0x004 +#define RX_BC_DISABLE BIT(7) +#define RX_RUNT BIT(6) +#define RX_AF_EN BIT(5) +#define RX_PAUSE_EN BIT(3) +#define RX_SEND_CRC BIT(2) +#define RX_PAD_STRIP BIT(1) +#define RX_EN BIT(0) + +#define NB8800_RANDOM_SEED 0x008 +#define NB8800_TX_SDP 0x14 +#define NB8800_TX_TPDP1 0x18 +#define NB8800_TX_TPDP2 0x19 +#define NB8800_SLOT_TIME 0x1c + +#define NB8800_MDIO_CMD 0x020 +#define MDIO_CMD_GO BIT(31) +#define MDIO_CMD_WR BIT(26) +#define MDIO_CMD_ADDR(x) ((x) << 21) +#define MDIO_CMD_REG(x) ((x) << 16) +#define MDIO_CMD_DATA(x) ((x) << 0) + +#define NB8800_MDIO_STS 0x024 +#define MDIO_STS_ERR BIT(31) + +#define NB8800_MC_ADDR(i) (0x028 + (i)) +#define NB8800_MC_INIT 0x02e +#define NB8800_UC_ADDR(i) (0x03c + (i)) + +#define NB8800_MAC_MODE 0x044 +#define RGMII_MODE BIT(7) +#define HALF_DUPLEX BIT(4) +#define BURST_EN BIT(3) +#define LOOPBACK_EN BIT(2) +#define GMAC_MODE BIT(0) + +#define NB8800_IC_THRESHOLD 0x050 +#define NB8800_PE_THRESHOLD 0x051 +#define NB8800_PF_THRESHOLD 0x052 +#define NB8800_TX_BUFSIZE 0x054 +#define NB8800_FIFO_CTL 0x056 +#define NB8800_PQ1 0x060 +#define NB8800_PQ2 0x061 +#define NB8800_SRC_ADDR(i) (0x06a + (i)) +#define NB8800_STAT_DATA 0x078 +#define NB8800_STAT_INDEX 0x07c +#define NB8800_STAT_CLEAR 0x07d + +#define NB8800_SLEEP_MODE 0x07e +#define SLEEP_MODE BIT(0) + +#define NB8800_WAKEUP 0x07f +#define WAKEUP BIT(0) + +/* Aurora NB8800 host interface registers */ +#define NB8800_TXC_CR 0x100 +#define TCR_LK BIT(12) +#define TCR_DS BIT(11) +#define TCR_BTS(x) (((x) & 0x7) << 8) +#define TCR_DIE BIT(7) +#define TCR_TFI(x) (((x) & 0x7) << 4) +#define TCR_LE BIT(3) +#define TCR_RS BIT(2) +#define TCR_DM BIT(1) +#define TCR_EN BIT(0) + +#define NB8800_TXC_SR 0x104 +#define TSR_DE BIT(3) +#define TSR_DI BIT(2) +#define TSR_TO BIT(1) +#define TSR_TI BIT(0) + +#define NB8800_TX_SAR 0x108 +#define NB8800_TX_DESC_ADDR 0x10c + +#define NB8800_TX_REPORT_ADDR 0x110 +#define TX_BYTES_TRANSFERRED(x) (((x) >> 16) & 0xffff) +#define TX_FIRST_DEFERRAL BIT(7) +#define TX_EARLY_COLLISIONS(x) (((x) >> 3) & 0xf) +#define TX_LATE_COLLISION BIT(2) +#define TX_PACKET_DROPPED BIT(1) +#define TX_FIFO_UNDERRUN BIT(0) +#define IS_TX_ERROR(r) ((r) & 0x07) + +#define NB8800_TX_FIFO_SR 0x114 +#define NB8800_TX_ITR 0x118 + +#define NB8800_RXC_CR 0x200 +#define RCR_FL BIT(13) +#define RCR_LK BIT(12) +#define RCR_DS BIT(11) +#define RCR_BTS(x) (((x) & 7) << 8) +#define RCR_DIE BIT(7) +#define RCR_RFI(x) (((x) & 7) << 4) +#define RCR_LE BIT(3) +#define RCR_RS BIT(2) +#define RCR_DM BIT(1) +#define RCR_EN BIT(0) + +#define NB8800_RXC_SR 0x204 +#define RSR_DE BIT(3) +#define RSR_DI BIT(2) +#define RSR_RO BIT(1) +#define RSR_RI BIT(0) + +#define NB8800_RX_SAR 0x208 +#define NB8800_RX_DESC_ADDR 0x20c + +#define NB8800_RX_REPORT_ADDR 0x210 +#define RX_BYTES_TRANSFERRED(x) (((x) >> 16) & 0xFFFF) +#define RX_MULTICAST_PKT BIT(9) +#define RX_BROADCAST_PKT BIT(8) +#define RX_LENGTH_ERR BIT(7) +#define RX_FCS_ERR BIT(6) +#define RX_RUNT_PKT BIT(5) +#define RX_FIFO_OVERRUN BIT(4) +#define RX_LATE_COLLISION BIT(3) +#define RX_ALIGNMENT_ERROR BIT(2) +#define RX_ERROR_MASK 0xfc +#define IS_RX_ERROR(r) ((r) & RX_ERROR_MASK) + +#define NB8800_RX_FIFO_SR 0x214 +#define NB8800_RX_ITR 0x218 + +/* Sigma Designs SMP86xx additional registers */ +#define NB8800_TANGOX_PAD_MODE 0x400 +#define PAD_MODE_MASK 0x7 +#define PAD_MODE_MII 0x0 +#define PAD_MODE_RGMII 0x1 +#define PAD_MODE_GTX_CLK_INV BIT(3) +#define PAD_MODE_GTX_CLK_DELAY BIT(4) + +#define NB8800_TANGOX_MDIO_CLKDIV 0x420 +#define NB8800_TANGOX_RESET 0x424 + +/* Hardware DMA descriptor */ +struct nb8800_dma_desc { + u32 s_addr; /* start address */ + u32 n_addr; /* next descriptor address */ + u32 r_addr; /* report address */ + u32 config; +} __aligned(8); + +#define DESC_ID BIT(23) +#define DESC_EOC BIT(22) +#define DESC_EOF BIT(21) +#define DESC_LK BIT(20) +#define DESC_DS BIT(19) +#define DESC_BTS(x) (((x) & 0x7) << 16) + +/* DMA descriptor and associated data for rx. + * Allocated from coherent memory. + */ +struct nb8800_rx_desc { + /* DMA descriptor */ + struct nb8800_dma_desc desc; + + /* Status report filled in by hardware */ + u32 report; +}; + +/* Address of buffer on rx ring */ +struct nb8800_rx_buf { + struct page *page; + unsigned long offset; +}; + +/* DMA descriptors and associated data for tx. + * Allocated from coherent memory. + */ +struct nb8800_tx_desc { + /* DMA descriptor. The second descriptor is used if packet + * data is unaligned. + */ + struct nb8800_dma_desc desc[2]; + + /* Status report filled in by hardware */ + u32 report; + + /* Bounce buffer for initial unaligned part of packet */ + u8 buf[8] __aligned(8); +}; + +/* Packet in tx queue */ +struct nb8800_tx_buf { + /* Currently queued skb */ + struct sk_buff *skb; + + /* DMA address of the first descriptor */ + dma_addr_t dma_desc; + + /* DMA address of packet data */ + dma_addr_t dma_addr; + + /* Length of DMA mapping, less than skb->len if alignment + * buffer is used. + */ + unsigned int dma_len; + + /* Number of packets in chain starting here */ + unsigned int chain_len; + + /* Packet chain ready to be submitted to hardware */ + bool ready; +}; + +struct nb8800_priv { + struct napi_struct napi; + + void __iomem *base; + + /* RX DMA descriptors */ + struct nb8800_rx_desc *rx_descs; + + /* RX buffers referenced by DMA descriptors */ + struct nb8800_rx_buf *rx_bufs; + + /* Current end of chain */ + u32 rx_eoc; + + /* Value for rx interrupt time register in NAPI interrupt mode */ + u32 rx_itr_irq; + + /* Value for rx interrupt time register in NAPI poll mode */ + u32 rx_itr_poll; + + /* Value for config field of rx DMA descriptors */ + u32 rx_dma_config; + + /* TX DMA descriptors */ + struct nb8800_tx_desc *tx_descs; + + /* TX packet queue */ + struct nb8800_tx_buf *tx_bufs; + + /* Number of free tx queue entries */ + atomic_t tx_free; + + /* First free tx queue entry */ + u32 tx_next; + + /* Next buffer to transmit */ + u32 tx_queue; + + /* Start of current packet chain */ + struct nb8800_tx_buf *tx_chain; + + /* Next buffer to reclaim */ + u32 tx_done; + + /* Lock for DMA activation */ + spinlock_t tx_lock; + + struct mii_bus *mii_bus; + struct device_node *phy_node; + struct phy_device *phydev; + + /* PHY connection type from DT */ + int phy_mode; + + /* Current link status */ + int speed; + int duplex; + int link; + + /* Pause settings */ + bool pause_aneg; + bool pause_rx; + bool pause_tx; + + /* DMA base address of rx descriptors, see rx_descs above */ + dma_addr_t rx_desc_dma; + + /* DMA base address of tx descriptors, see tx_descs above */ + dma_addr_t tx_desc_dma; + + struct clk *clk; +}; + +struct nb8800_ops { + int (*init)(struct net_device *dev); + int (*reset)(struct net_device *dev); +}; + +#endif /* _NB8800_H_ */ |