diff options
Diffstat (limited to 'drivers/char/Kconfig')
| -rw-r--r-- | drivers/char/Kconfig | 165 |
1 files changed, 50 insertions, 115 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 26956c006987..fea084e0909b 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -7,28 +7,6 @@ menu "Character devices" source "drivers/tty/Kconfig" -config DEVMEM - bool "/dev/mem virtual device support" - default y - help - Say Y here if you want to support the /dev/mem device. - The /dev/mem device is used to access areas of physical - memory. - When in doubt, say "Y". - -config DEVKMEM - bool "/dev/kmem virtual device support" - # On arm64, VMALLOC_START < PAGE_OFFSET, which confuses kmem read/write - depends on !ARM64 - help - Say Y here if you want to support the /dev/kmem device. The - /dev/kmem device is rarely used, but can be used for certain - kind of kernel debugging operations. - When in doubt, say "N". - -source "drivers/tty/serial/Kconfig" -source "drivers/tty/serdev/Kconfig" - config TTY_PRINTK tristate "TTY driver to output user messages via printk" depends on EXPERT && TTY @@ -113,8 +91,6 @@ config PPDEV If unsure, say N. -source "drivers/tty/hvc/Kconfig" - config VIRTIO_CONSOLE tristate "Virtio console" depends on VIRTIO && TTY @@ -220,89 +196,6 @@ config NWFLASH source "drivers/char/hw_random/Kconfig" -config NVRAM - tristate "/dev/nvram support" - depends on X86 || HAVE_ARCH_NVRAM_OPS - default M68K || PPC - ---help--- - If you say Y here and create a character special file /dev/nvram - with major number 10 and minor number 144 using mknod ("man mknod"), - you get read and write access to the non-volatile memory. - - /dev/nvram may be used to view settings in NVRAM or to change them - (with some utility). It could also be used to frequently - save a few bits of very important data that may not be lost over - power-off and for which writing to disk is too insecure. Note - however that most NVRAM space in a PC belongs to the BIOS and you - should NEVER idly tamper with it. See Ralf Brown's interrupt list - for a guide to the use of CMOS bytes by your BIOS. - - This memory is conventionally called "NVRAM" on PowerPC machines, - "CMOS RAM" on PCs, "NVRAM" on Ataris and "PRAM" on Macintoshes. - - To compile this driver as a module, choose M here: the - module will be called nvram. - -# -# These legacy RTC drivers just cause too many conflicts with the generic -# RTC framework ... let's not even try to coexist any more. -# -if RTC_LIB=n - -config RTC - tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)" - depends on ALPHA - ---help--- - If you say Y here and create a character special file /dev/rtc with - major number 10 and minor number 135 using mknod ("man mknod"), you - will get access to the real time clock (or hardware clock) built - into your computer. - - Every PC has such a clock built in. It can be used to generate - signals from as low as 1Hz up to 8192Hz, and can also be used - as a 24 hour alarm. It reports status information via the file - /proc/driver/rtc and its behaviour is set by various ioctls on - /dev/rtc. - - If you run Linux on a multiprocessor machine and said Y to - "Symmetric Multi Processing" above, you should say Y here to read - and set the RTC in an SMP compatible fashion. - - If you think you have a use for such a device (such as periodic data - sampling), then say Y here, and read <file:Documentation/admin-guide/rtc.rst> - for details. - - To compile this driver as a module, choose M here: the - module will be called rtc. - -config JS_RTC - tristate "Enhanced Real Time Clock Support" - depends on SPARC32 && PCI - ---help--- - If you say Y here and create a character special file /dev/rtc with - major number 10 and minor number 135 using mknod ("man mknod"), you - will get access to the real time clock (or hardware clock) built - into your computer. - - Every PC has such a clock built in. It can be used to generate - signals from as low as 1Hz up to 8192Hz, and can also be used - as a 24 hour alarm. It reports status information via the file - /proc/driver/rtc and its behaviour is set by various ioctls on - /dev/rtc. - - If you think you have a use for such a device (such as periodic data - sampling), then say Y here, and read <file:Documentation/admin-guide/rtc.rst> - for details. - - To compile this driver as a module, choose M here: the - module will be called js-rtc. - -config EFI_RTC - bool "EFI Real Time Clock Services" - depends on IA64 - -endif # RTC_LIB - config DTLK tristate "Double Talk PC internal speech card support" depends on ISA @@ -431,6 +324,48 @@ config NSC_GPIO pc8736x_gpio drivers. If those drivers are built as modules, this one will be too, named nsc_gpio +config DEVMEM + bool "/dev/mem virtual device support" + default y + help + Say Y here if you want to support the /dev/mem device. + The /dev/mem device is used to access areas of physical + memory. + When in doubt, say "Y". + +config DEVKMEM + bool "/dev/kmem virtual device support" + # On arm64, VMALLOC_START < PAGE_OFFSET, which confuses kmem read/write + depends on !ARM64 + help + Say Y here if you want to support the /dev/kmem device. The + /dev/kmem device is rarely used, but can be used for certain + kind of kernel debugging operations. + When in doubt, say "N". + +config NVRAM + tristate "/dev/nvram support" + depends on X86 || HAVE_ARCH_NVRAM_OPS + default M68K || PPC + ---help--- + If you say Y here and create a character special file /dev/nvram + with major number 10 and minor number 144 using mknod ("man mknod"), + you get read and write access to the non-volatile memory. + + /dev/nvram may be used to view settings in NVRAM or to change them + (with some utility). It could also be used to frequently + save a few bits of very important data that may not be lost over + power-off and for which writing to disk is too insecure. Note + however that most NVRAM space in a PC belongs to the BIOS and you + should NEVER idly tamper with it. See Ralf Brown's interrupt list + for a guide to the use of CMOS bytes by your BIOS. + + This memory is conventionally called "NVRAM" on PowerPC machines, + "CMOS RAM" on PCs, "NVRAM" on Ataris and "PRAM" on Macintoshes. + + To compile this driver as a module, choose M here: the + module will be called nvram. + config RAW_DRIVER tristate "RAW driver (/dev/raw/rawN)" depends on BLOCK @@ -452,6 +387,14 @@ config MAX_RAW_DEVS Default is 256. Increase this number in case you need lots of raw devices. +config DEVPORT + bool "/dev/port character device" + depends on ISA || PCI + default y + help + Say Y here if you want to support the /dev/port device. The /dev/port + device is similar to /dev/mem, but for I/O ports. + config HPET bool "HPET - High Precision Event Timer" if (X86 || IA64) default n @@ -511,14 +454,6 @@ config TELCLOCK /sys/devices/platform/telco_clock, with a number of files for controlling the behavior of this hardware. -config DEVPORT - bool "/dev/port character device" - depends on ISA || PCI - default y - help - Say Y here if you want to support the /dev/port device. The /dev/port - device is similar to /dev/mem, but for I/O ports. - source "drivers/s390/char/Kconfig" source "drivers/char/xillybus/Kconfig" |