diff options
Diffstat (limited to 'drivers/ata/libata-scsi.c')
| -rw-r--r-- | drivers/ata/libata-scsi.c | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 512a3ee8caf6..340a616d226b 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -47,6 +47,7 @@ #include <linux/hdreg.h> #include <linux/uaccess.h> #include <linux/suspend.h> +#include <asm/unaligned.h> #include "libata.h" @@ -1963,6 +1964,7 @@ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf) 0x80, /* page 0x80, unit serial no page */ 0x83, /* page 0x83, device ident page */ 0x89, /* page 0x89, ata info page */ + 0xb0, /* page 0xb0, block limits page */ 0xb1, /* page 0xb1, block device characteristics page */ }; @@ -2084,6 +2086,41 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf) return 0; } +static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf) +{ + u32 min_io_sectors; + + rbuf[1] = 0xb0; + rbuf[3] = 0x3c; /* required VPD size with unmap support */ + + /* + * Optimal transfer length granularity. + * + * This is always one physical block, but for disks with a smaller + * logical than physical sector size we need to figure out what the + * latter is. + */ + if (ata_id_has_large_logical_sectors(args->id)) + min_io_sectors = ata_id_logical_per_physical_sectors(args->id); + else + min_io_sectors = 1; + put_unaligned_be16(min_io_sectors, &rbuf[6]); + + /* + * Optimal unmap granularity. + * + * The ATA spec doesn't even know about a granularity or alignment + * for the TRIM command. We can leave away most of the unmap related + * VPD page entries, but we have specifify a granularity to signal + * that we support some form of unmap - in thise case via WRITE SAME + * with the unmap bit set. + */ + if (ata_id_has_trim(args->id)) + put_unaligned_be32(1, &rbuf[28]); + + return 0; +} + static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf) { int form_factor = ata_id_form_factor(args->id); @@ -2373,6 +2410,9 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) rbuf[13] = log_per_phys; rbuf[14] = (lowest_aligned >> 8) & 0x3f; rbuf[15] = lowest_aligned; + + if (ata_id_has_trim(args->id)) + rbuf[14] |= 0x80; } return 0; @@ -2895,6 +2935,58 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) return 1; } +static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *tf = &qc->tf; + struct scsi_cmnd *scmd = qc->scsicmd; + struct ata_device *dev = qc->dev; + const u8 *cdb = scmd->cmnd; + u64 block; + u32 n_block; + u32 size; + void *buf; + + /* we may not issue DMA commands if no DMA mode is set */ + if (unlikely(!dev->dma_mode)) + goto invalid_fld; + + if (unlikely(scmd->cmd_len < 16)) + goto invalid_fld; + scsi_16_lba_len(cdb, &block, &n_block); + + /* for now we only support WRITE SAME with the unmap bit set */ + if (unlikely(!(cdb[1] & 0x8))) + goto invalid_fld; + + /* + * WRITE SAME always has a sector sized buffer as payload, this + * should never be a multiple entry S/G list. + */ + if (!scsi_sg_count(scmd)) + goto invalid_fld; + + buf = page_address(sg_page(scsi_sglist(scmd))); + size = ata_set_lba_range_entries(buf, 512 / 8, block, n_block); + + tf->protocol = ATA_PROT_DMA; + tf->hob_feature = 0; + tf->feature = ATA_DSM_TRIM; + tf->hob_nsect = (size / 512) >> 8; + tf->nsect = size / 512; + tf->command = ATA_CMD_DSM; + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 | + ATA_TFLAG_WRITE; + + ata_qc_set_pc_nbytes(qc); + + return 0; + + invalid_fld: + ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00); + /* "Invalid field in cdb" */ + return 1; +} + /** * ata_get_xlat_func - check if SCSI to ATA translation is possible * @dev: ATA device @@ -2919,6 +3011,9 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) case WRITE_16: return ata_scsi_rw_xlat; + case 0x93 /*WRITE_SAME_16*/: + return ata_scsi_write_same_xlat; + case SYNCHRONIZE_CACHE: if (ata_try_flush_cache(dev)) return ata_scsi_flush_xlat; @@ -3108,6 +3203,9 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, case 0x89: ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89); break; + case 0xb0: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b0); + break; case 0xb1: ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1); break; |