diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/kernel/topology.c | 54 |
1 files changed, 27 insertions, 27 deletions
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 3997c411c140..9d853189028b 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -26,30 +26,30 @@ #include <asm/topology.h> /* - * cpu power scale management + * cpu capacity scale management */ /* - * cpu power table + * cpu capacity table * This per cpu data structure describes the relative capacity of each core. * On a heteregenous system, cores don't have the same computation capacity - * and we reflect that difference in the cpu_power field so the scheduler can - * take this difference into account during load balance. A per cpu structure - * is preferred because each CPU updates its own cpu_power field during the - * load balance except for idle cores. One idle core is selected to run the - * rebalance_domains for all idle cores and the cpu_power can be updated - * during this sequence. + * and we reflect that difference in the cpu_capacity field so the scheduler + * can take this difference into account during load balance. A per cpu + * structure is preferred because each CPU updates its own cpu_capacity field + * during the load balance except for idle cores. One idle core is selected + * to run the rebalance_domains for all idle cores and the cpu_capacity can be + * updated during this sequence. */ static DEFINE_PER_CPU(unsigned long, cpu_scale); -unsigned long arch_scale_freq_power(struct sched_domain *sd, int cpu) +unsigned long arch_scale_freq_capacity(struct sched_domain *sd, int cpu) { return per_cpu(cpu_scale, cpu); } -static void set_power_scale(unsigned int cpu, unsigned long power) +static void set_capacity_scale(unsigned int cpu, unsigned long capacity) { - per_cpu(cpu_scale, cpu) = power; + per_cpu(cpu_scale, cpu) = capacity; } #ifdef CONFIG_OF @@ -62,11 +62,11 @@ struct cpu_efficiency { * Table of relative efficiency of each processors * The efficiency value must fit in 20bit and the final * cpu_scale value must be in the range - * 0 < cpu_scale < 3*SCHED_POWER_SCALE/2 + * 0 < cpu_scale < 3*SCHED_CAPACITY_SCALE/2 * in order to return at most 1 when DIV_ROUND_CLOSEST * is used to compute the capacity of a CPU. * Processors that are not defined in the table, - * use the default SCHED_POWER_SCALE value for cpu_scale. + * use the default SCHED_CAPACITY_SCALE value for cpu_scale. */ static const struct cpu_efficiency table_efficiency[] = { {"arm,cortex-a15", 3891}, @@ -83,9 +83,9 @@ static unsigned long middle_capacity = 1; * Iterate all CPUs' descriptor in DT and compute the efficiency * (as per table_efficiency). Also calculate a middle efficiency * as close as possible to (max{eff_i} - min{eff_i}) / 2 - * This is later used to scale the cpu_power field such that an - * 'average' CPU is of middle power. Also see the comments near - * table_efficiency[] and update_cpu_power(). + * This is later used to scale the cpu_capacity field such that an + * 'average' CPU is of middle capacity. Also see the comments near + * table_efficiency[] and update_cpu_capacity(). */ static void __init parse_dt_topology(void) { @@ -141,15 +141,15 @@ static void __init parse_dt_topology(void) * cpu_scale because all CPUs have the same capacity. Otherwise, we * compute a middle_capacity factor that will ensure that the capacity * of an 'average' CPU of the system will be as close as possible to - * SCHED_POWER_SCALE, which is the default value, but with the + * SCHED_CAPACITY_SCALE, which is the default value, but with the * constraint explained near table_efficiency[]. */ if (4*max_capacity < (3*(max_capacity + min_capacity))) middle_capacity = (min_capacity + max_capacity) - >> (SCHED_POWER_SHIFT+1); + >> (SCHED_CAPACITY_SHIFT+1); else middle_capacity = ((max_capacity / 3) - >> (SCHED_POWER_SHIFT-1)) + 1; + >> (SCHED_CAPACITY_SHIFT-1)) + 1; } @@ -158,20 +158,20 @@ static void __init parse_dt_topology(void) * boot. The update of all CPUs is in O(n^2) for heteregeneous system but the * function returns directly for SMP system. */ -static void update_cpu_power(unsigned int cpu) +static void update_cpu_capacity(unsigned int cpu) { if (!cpu_capacity(cpu)) return; - set_power_scale(cpu, cpu_capacity(cpu) / middle_capacity); + set_capacity_scale(cpu, cpu_capacity(cpu) / middle_capacity); - printk(KERN_INFO "CPU%u: update cpu_power %lu\n", - cpu, arch_scale_freq_power(NULL, cpu)); + printk(KERN_INFO "CPU%u: update cpu_capacity %lu\n", + cpu, arch_scale_freq_capacity(NULL, cpu)); } #else static inline void parse_dt_topology(void) {} -static inline void update_cpu_power(unsigned int cpuid) {} +static inline void update_cpu_capacity(unsigned int cpuid) {} #endif /* @@ -267,7 +267,7 @@ void store_cpu_topology(unsigned int cpuid) update_siblings_masks(cpuid); - update_cpu_power(cpuid); + update_cpu_capacity(cpuid); printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n", cpuid, cpu_topology[cpuid].thread_id, @@ -297,7 +297,7 @@ void __init init_cpu_topology(void) { unsigned int cpu; - /* init core mask and power*/ + /* init core mask and capacity */ for_each_possible_cpu(cpu) { struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]); @@ -307,7 +307,7 @@ void __init init_cpu_topology(void) cpumask_clear(&cpu_topo->core_sibling); cpumask_clear(&cpu_topo->thread_sibling); - set_power_scale(cpu, SCHED_POWER_SCALE); + set_capacity_scale(cpu, SCHED_CAPACITY_SCALE); } smp_wmb(); |