diff options
Diffstat (limited to 'arch/arm')
29 files changed, 155 insertions, 148 deletions
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index a874dbfb5ae6..e6138310e5ce 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -51,11 +51,11 @@ dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; ecc@80008000 { - reg = <0x80008000 2000>; + reg = <0x80008000 0x2000>; status = "disabled"; }; @@ -63,7 +63,7 @@ compatible = "fsl,imx23-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; @@ -72,14 +72,14 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <15 14>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; etm@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; status = "disabled"; }; @@ -87,7 +87,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx23-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; @@ -273,32 +273,32 @@ }; emi@80020000 { - reg = <0x80020000 2000>; + reg = <0x80020000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; @@ -310,14 +310,14 @@ }; ssp1: ssp@80034000 { - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <2 20>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; tvenc@80038000 { - reg = <0x80038000 2000>; + reg = <0x80038000 0x2000>; status = "disabled"; }; }; @@ -330,37 +330,37 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; status = "disabled"; }; audio-out@80048000 { - reg = <0x80048000 2000>; + reg = <0x80048000 0x2000>; status = "disabled"; }; audio-in@8004c000 { - reg = <0x8004c000 2000>; + reg = <0x8004c000 0x2000>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; @@ -370,26 +370,26 @@ }; i2c@80058000 { - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; status = "disabled"; }; rtc@8005c000 { compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x8005c000 2000>; + reg = <0x8005c000 0x2000>; interrupts = <22>; }; pwm: pwm@80064000 { compatible = "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <5>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; @@ -429,7 +429,7 @@ ranges; usbctrl@80080000 { - reg = <0x80080000 0x10000>; + reg = <0x80080000 0x40000>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index d3f8296e19e0..0a8978a40ece 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -27,7 +27,7 @@ status = "okay"; }; - uart@1000a000 { + uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 00bae3aad5ab..5303ab680a34 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -19,6 +19,12 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; }; avic: avic-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 787efac68da8..3fa6d190fab4 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -57,18 +57,18 @@ }; hsadc@80002000 { - reg = <0x80002000 2000>; + reg = <0x80002000 0x2000>; interrupts = <13 87>; status = "disabled"; }; dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; - reg = <0x80004000 2000>; + reg = <0x80004000 0x2000>; }; perfmon@80006000 { - reg = <0x80006000 800>; + reg = <0x80006000 0x800>; interrupts = <27>; status = "disabled"; }; @@ -77,7 +77,7 @@ compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; - reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>; reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; @@ -86,28 +86,28 @@ }; ssp0: ssp@80010000 { - reg = <0x80010000 2000>; + reg = <0x80010000 0x2000>; interrupts = <96 82>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp@80012000 { - reg = <0x80012000 2000>; + reg = <0x80012000 0x2000>; interrupts = <97 83>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp@80014000 { - reg = <0x80014000 2000>; + reg = <0x80014000 0x2000>; interrupts = <98 84>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp@80016000 { - reg = <0x80016000 2000>; + reg = <0x80016000 0x2000>; interrupts = <99 85>; fsl,ssp-dma-channel = <3>; status = "disabled"; @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-pinctrl", "simple-bus"; - reg = <0x80018000 2000>; + reg = <0x80018000 0x2000>; gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; @@ -510,96 +510,96 @@ }; digctl@8001c000 { - reg = <0x8001c000 2000>; + reg = <0x8001c000 0x2000>; interrupts = <89>; status = "disabled"; }; etm@80022000 { - reg = <0x80022000 2000>; + reg = <0x80022000 0x2000>; status = "disabled"; }; dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; - reg = <0x80024000 2000>; + reg = <0x80024000 0x2000>; }; dcp@80028000 { - reg = <0x80028000 2000>; + reg = <0x80028000 0x2000>; interrupts = <52 53 54>; status = "disabled"; }; pxp@8002a000 { - reg = <0x8002a000 2000>; + reg = <0x8002a000 0x2000>; interrupts = <39>; status = "disabled"; }; ocotp@8002c000 { - reg = <0x8002c000 2000>; + reg = <0x8002c000 0x2000>; status = "disabled"; }; axi-ahb@8002e000 { - reg = <0x8002e000 2000>; + reg = <0x8002e000 0x2000>; status = "disabled"; }; lcdif@80030000 { compatible = "fsl,imx28-lcdif"; - reg = <0x80030000 2000>; + reg = <0x80030000 0x2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80032000 2000>; + reg = <0x80032000 0x2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; - reg = <0x80034000 2000>; + reg = <0x80034000 0x2000>; interrupts = <9>; status = "disabled"; }; simdbg@8003c000 { - reg = <0x8003c000 200>; + reg = <0x8003c000 0x200>; status = "disabled"; }; simgpmisel@8003c200 { - reg = <0x8003c200 100>; + reg = <0x8003c200 0x100>; status = "disabled"; }; simsspsel@8003c300 { - reg = <0x8003c300 100>; + reg = <0x8003c300 0x100>; status = "disabled"; }; simmemsel@8003c400 { - reg = <0x8003c400 100>; + reg = <0x8003c400 0x100>; status = "disabled"; }; gpiomon@8003c500 { - reg = <0x8003c500 100>; + reg = <0x8003c500 0x100>; status = "disabled"; }; simenet@8003c700 { - reg = <0x8003c700 100>; + reg = <0x8003c700 0x100>; status = "disabled"; }; armjtag@8003c800 { - reg = <0x8003c800 100>; + reg = <0x8003c800 0x100>; status = "disabled"; }; }; @@ -612,45 +612,45 @@ ranges; clkctl@80040000 { - reg = <0x80040000 2000>; + reg = <0x80040000 0x2000>; status = "disabled"; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; - reg = <0x80042000 2000>; + reg = <0x80042000 0x2000>; interrupts = <59 80>; fsl,saif-dma-channel = <4>; status = "disabled"; }; power@80044000 { - reg = <0x80044000 2000>; + reg = <0x80044000 0x2000>; status = "disabled"; }; saif1: saif@80046000 { compatible = "fsl,imx28-saif"; - reg = <0x80046000 2000>; + reg = <0x80046000 0x2000>; interrupts = <58 81>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc@80050000 { - reg = <0x80050000 2000>; + reg = <0x80050000 0x2000>; status = "disabled"; }; spdif@80054000 { - reg = <0x80054000 2000>; + reg = <0x80054000 0x2000>; interrupts = <45 66>; status = "disabled"; }; rtc@80056000 { compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; - reg = <0x80056000 2000>; + reg = <0x80056000 0x2000>; interrupts = <29>; }; @@ -658,7 +658,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x80058000 2000>; + reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; status = "disabled"; @@ -668,7 +668,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-i2c"; - reg = <0x8005a000 2000>; + reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; status = "disabled"; @@ -676,14 +676,14 @@ pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timrot@80068000 { - reg = <0x80068000 2000>; + reg = <0x80068000 0x2000>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index de065b5976e6..cd86177a3ea2 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -53,7 +53,7 @@ spi-max-frequency = <6000000>; reg = <0>; interrupt-parent = <&gpio1>; - interrupts = <8>; + interrupts = <8 0x4>; regulators { sw1_reg: sw1 { diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 53cbaa3d4f90..aba28dc87fc8 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -17,6 +17,10 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; }; tzic: tz-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 5b8eafcdbeec..da895e93a999 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -64,12 +64,32 @@ reg = <0xf4000000 0x2000000>; phy-mode = "mii"; interrupt-parent = <&gpio2>; - interrupts = <31>; + interrupts = <31 0x8>; reg-io-width = <4>; + /* + * VDD33A and VDDVARIO of LAN9220 are supplied by + * SW4_3V3 of LTC3589. Before the regulator driver + * for this PMIC is available, we use a fixed dummy + * 3V3 regulator to get LAN9220 driver probing work. + */ + vdd33a-supply = <®_3p3v>; + vddvario-supply = <®_3p3v>; smsc,irq-push-pull; }; }; + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index fc79cdc4b4e6..cd37165edce5 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; tzic: tz-interrupt-controller@0fffc000 { diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index d42e851ceb97..72f30f3e6171 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -53,6 +53,7 @@ fsl,pins = < 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ >; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 3d3c64b014e6..fd57079f71a9 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; cpus { diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index f725b9637b33..3c9f32f9b6b4 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y +CONFIG_MXS_DMA=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index ccdb6357fb74..4edcfb4e4dee 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -34,7 +34,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_AUTO_ZRELADDR=y CONFIG_FPE_NWFPE=y CONFIG_NET=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 1d24f8458bef..71277a1591ba 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_KALLSYMS is not set -# CONFIG_BUG is not set +# CONFIG_BUGVERBOSE is not set # CONFIG_ELF_CORE is not set # CONFIG_SHMEM is not set CONFIG_SLOB=y diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 5de69f2fcca9..f6b9fc70161b 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void) dm644x_init(); } -/* - I2C initialization -*/ -static struct davinci_i2c_platform_data ntosd2_i2c_pdata = { - .bus_freq = 20 /* kHz */, - .bus_delay = 100 /* usec */, -}; - -static struct i2c_board_info __initdata ntosd2_i2c_info[] = { -}; - -static int ntosd2_init_i2c(void) -{ - int status; - - davinci_init_i2c(&ntosd2_i2c_pdata); - status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type); - if (status == 0) { - status = gpio_direction_input(NTOSD2_MSP430_IRQ); - if (status == 0) { - status = gpio_to_irq(NTOSD2_MSP430_IRQ); - if (status > 0) { - ntosd2_i2c_info[0].irq = status; - i2c_register_board_info(1, - ntosd2_i2c_info, - ARRAY_SIZE(ntosd2_i2c_info)); - } - } - } - return status; -} - static struct davinci_mmc_config davinci_ntosd2_mmc_config = { .wires = 4, .version = MMC_CTLR_VERSION_1 @@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void) { struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; - int status; aemif_clk = clk_get(NULL, "aemif"); clk_enable(aemif_clk); @@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void) platform_add_devices(davinci_ntosd2_devices, ARRAY_SIZE(davinci_ntosd2_devices)); - /* Initialize I2C interface specific for this board */ - status = ntosd2_init_i2c(); - if (status < 0) - pr_warning("davinci_ntosd2_init: msp430 irq setup failed:" - " %d\n", status); - davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_ntosd2_snd_data); diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 373c3c00d24c..c0bc83a7663e 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -115,7 +115,7 @@ static __init int exynos_pm_dt_parse_domains(void) } #endif /* CONFIG_OF */ -static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, +static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 7aa6313fb167..f69ca4680049 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0"); - clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0"); + clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc"); @@ -250,8 +250,10 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1"); clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0"); clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma"); - clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma"); + clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0"); + clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); + clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 8e19e70f90f9..1253af2d9971 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -130,7 +130,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], "kpp", NULL); + clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0"); clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index f6086693ebd2..4bdcaa97bd98 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -303,6 +303,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_prepare_enable(clk[aips_tz2]); /* fec */ clk_prepare_enable(clk[spba]); clk_prepare_enable(clk[emi_fast_gate]); /* fec */ + clk_prepare_enable(clk[emi_slow_gate]); /* eim */ clk_prepare_enable(clk[tmax1]); clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */ diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index ebf680bebdf2..3fa6c51390da 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/export.h> #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/irq.h> diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 7b1055c8e0b9..3b2267529f5e 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -456,7 +456,7 @@ static void __init ap_init_timer(void) clk = clk_get_sys("ap_timer", NULL); BUG_ON(IS_ERR(clk)); - clk_enable(clk); + clk_prepare_enable(clk); rate = clk_get_rate(clk); writel(0, TIMER0_VA_BASE + TIMER_CTRL); diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 2a576abf409b..a5717558ee89 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -9,5 +9,5 @@ dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb -dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb -dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb +dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index ccdf83b17cf1..9a8bbda195b2 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -2,9 +2,6 @@ if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig" -config MXS_OCOTP - bool - config SOC_IMX23 bool select ARM_AMBA @@ -66,7 +63,6 @@ config MACH_MX28EVK select MXS_HAVE_PLATFORM_MXS_SAIF select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_RTC_STMP3XXX - select MXS_OCOTP help Include support for MX28EVK platform. This includes specific configurations for the board and its peripherals. @@ -94,7 +90,6 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXSFB - select MXS_OCOTP config MODULE_APX4 bool @@ -106,7 +101,6 @@ config MODULE_APX4 select MXS_HAVE_PLATFORM_MXS_I2C select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_SAIF - select MXS_OCOTP config MACH_TX28 bool "Ka-Ro TX28 module" diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index e41590ccb437..fed3695a1339 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,7 +1,6 @@ # Common support -obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o +obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o -obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 5905ed130e94..d89d87ae144c 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = { static struct eeti_ts_platform_data eeti_ts_pdata = { .irq_active_high = 1, + .irq_gpio = GPIO_TOUCH_IRQ, }; static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = { .type = "eeti_ts", .addr = 0x0a, - .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ), .platform_data = &eeti_ts_pdata, }; diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index e24961109b70..d56b0f7f2b20 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02 select I2C select POWER_SUPPLY select MACH_NEO1973 - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_USB_HOST help Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone @@ -493,7 +493,7 @@ config MACH_RX1950 select S3C24XX_DCLK select PM_H1940 if PM select I2C - select S3C2410_PWM + select S3C24XX_PWM select S3C_DEV_NAND select S3C2410_IOTIMING if S3C2440_CPUFREQ select S3C2440_XTAL_16934400 diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c index 6a2352436e62..f8e47235babe 100644 --- a/arch/arm/mach-sa1100/leds-hackkit.c +++ b/arch/arm/mach-sa1100/leds-hackkit.c @@ -10,6 +10,7 @@ * as cpu led, the green one is used as timer led. */ #include <linux/init.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/leds.h> diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 8fd387bf31f0..b7344beec102 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -51,7 +51,7 @@ static struct regulator_init_data ldo0_data = { .consumer_supplies = tps658621_ldo0_supply, }; -#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv) \ +#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\ static struct regulator_init_data _id##_data = { \ .supply_regulator = _supply, \ .constraints = { \ @@ -63,21 +63,22 @@ static struct regulator_init_data ldo0_data = { .valid_ops_mask = (REGULATOR_CHANGE_MODE | \ REGULATOR_CHANGE_STATUS | \ REGULATOR_CHANGE_VOLTAGE), \ + .always_on = _on, \ }, \ } -HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500); -HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550); -HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500); -HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475); -HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300); -HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300); -HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300); +HARMONY_REGULATOR_INIT(sm0, "vdd_sm0", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm1, "vdd_sm1", "vdd_sys", 725, 1500, 1); +HARMONY_REGULATOR_INIT(sm2, "vdd_sm2", "vdd_sys", 3000, 4550, 1); +HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1); +HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0); +HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1); +HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL, 1250, 3300, 1); +HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0); +HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1); #define TPS_REG(_id, _data) \ { \ @@ -119,9 +120,10 @@ static struct i2c_board_info __initdata harmony_regulators[] = { int __init harmony_regulator_init(void) { + regulator_register_always_on(0, "vdd_sys", + NULL, 0, 5000000); + if (machine_is_harmony()) { - regulator_register_always_on(0, "vdd_sys", - NULL, 0, 5000000); i2c_register_board_info(3, harmony_regulators, 1); } else { /* Harmony, booted using device tree */ struct device_node *np; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c2cdf6500f75..4e7d1182e8a3 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -358,7 +358,7 @@ void __init dma_contiguous_remap(void) if (end > arm_lowmem_limit) end = arm_lowmem_limit; if (start >= end) - return; + continue; map.pfn = __phys_to_pfn(start); map.virtual = __phys_to_virt(start); @@ -423,7 +423,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) unsigned int pageno; unsigned long flags; void *ptr = NULL; - size_t align; + unsigned long align_mask; if (!pool->vaddr) { WARN(1, "coherent pool not initialised!\n"); @@ -435,11 +435,11 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) * small, so align them to their order in pages, minimum is a page * size. This helps reduce fragmentation of the DMA space. */ - align = PAGE_SIZE << get_order(size); + align_mask = (1 << get_order(size)) - 1; spin_lock_irqsave(&pool->lock, flags); pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages, - 0, count, (1 << align) - 1); + 0, count, align_mask); if (pageno < pool->nr_pages) { bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; @@ -648,12 +648,12 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, if (arch_is_coherent() || nommu()) { __dma_free_buffer(page, size); + } else if (__free_from_pool(cpu_addr, size)) { + return; } else if (!IS_ENABLED(CONFIG_CMA)) { __dma_free_remap(cpu_addr, size); __dma_free_buffer(page, size); } else { - if (__free_from_pool(cpu_addr, size)) - return; /* * Non-atomic allocations cannot be freed with IRQs disabled */ diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 7aca31c1df1f..9c3b90c3538e 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -403,7 +403,8 @@ config S5P_DEV_USB_EHCI config S3C24XX_PWM bool "PWM device support" - select HAVE_PWM + select PWM + select PWM_SAMSUNG help Support for exporting the PWM timer blocks via the pwm device system |