diff options
Diffstat (limited to 'arch/arm/boot/dts/omap3-gta04.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/omap3-gta04.dtsi | 39 |
1 files changed, 38 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 93b420934e8e..04f2b53d4d3d 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -32,6 +32,14 @@ display1 = &tv0; }; + ldo_3v3: fixedregulator { + compatible = "regulator-fixed"; + regulator-name = "ldo_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + /* fixed 26MHz oscillator */ hfclk_26m: oscillator { #clock-cells = <0>; @@ -116,6 +124,7 @@ spi-cpol; spi-cpha; + backlight= <&backlight>; label = "lcd"; port { lcd_in: endpoint { @@ -125,7 +134,7 @@ }; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm11 0 12000000 0>; pwm-names = "backlight"; @@ -224,6 +233,15 @@ }; }; +&omap3_pmx_wkup { + gpio1_pins: pinmux_gpio1_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */ + OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_clkout.gpio_10 */ + >; + }; +}; + &omap3_pmx_core { pinctrl-names = "default"; pinctrl-0 = < @@ -312,6 +330,12 @@ >; }; + gps_pins: pinmux_gps_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */ + >; + }; + hdq_pins: hdq_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ @@ -636,6 +660,11 @@ status = "disabled"; }; +&gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; @@ -644,6 +673,14 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; + gnss: gnss { + compatible = "wi2wi,w2sg0004"; + pinctrl-names = "default"; + pinctrl-0 = <&gps_pins>; + sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; + lna-supply = <&vsim>; + vcc-supply = <&ldo_3v3>; + }; }; &uart3 { |