diff options
Diffstat (limited to 'Documentation')
4 files changed, 74 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt index 2117d4ac1ae5..5ddef1dc0c1a 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt @@ -31,6 +31,17 @@ Required properties: - interrupts: specifies the interrupt line(s) in the interrupt-parent controller node; valid values depend on the type of parent interrupt controller +Optional properties: + +- brcm,irq-can-wake: If present, this means the L1 controller can be used as a + wakeup source for system suspend/resume. + +Optional properties: + +- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts + have already been configured by the firmware and should be left unmanaged. + This should have one 32-bit word per status/set/clear/mask group. + If multiple reg ranges and interrupt-parent entries are present on an SMP system, the driver will allow IRQ SMP affinity to be set up through the /proc/irq/ interface. In the simplest possible configuration, only one diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt new file mode 100644 index 000000000000..f0ad7801e8cf --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt @@ -0,0 +1,49 @@ +* Freescale Layerscape external IRQs + +Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting +the polarity of certain external interrupt lines. + +The device node must be a child of the node representing the +Supplemental Configuration Unit (SCFG). + +Required properties: +- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq". +- #interrupt-cells: Must be 2. The first element is the index of the + external interrupt line. The second element is the trigger type. +- #address-cells: Must be 0. +- interrupt-controller: Identifies the node as an interrupt controller +- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in + the SCFG. +- interrupt-map: Specifies the mapping from external interrupts to GIC + interrupts. +- interrupt-map-mask: Must be <0xffffffff 0>. + +Example: + scfg: scfg@1570000 { + compatible = "fsl,ls1021a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1570000 0x10000>; + + extirq: interrupt-controller@1ac { + compatible = "fsl,ls1021a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1ac 4>; + interrupt-map = + <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; + }; + + + interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <&extirq 1 IRQ_TYPE_LEVEL_LOW>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt index 4a3ee253f7f0..4ebfa0008781 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt @@ -108,3 +108,15 @@ commonly used: sensitivity = <7>; }; }; + +3) Interrupt wakeup parent +-------------------------- + +Some interrupt controllers in a SoC, are always powered on and have a select +interrupts routed to them, so that they can wakeup the SoC from suspend. These +interrupt controllers do not fall into the category of a parent interrupt +controller and can be specified by the "wakeup-parent" property and contain a +single phandle referring to the wakeup capable interrupt controller. + + Example: + wakeup-parent = <&pdc_intc>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt index 8e0797cb1487..1df293953327 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt @@ -17,7 +17,8 @@ Properties: - compatible: Usage: required Value type: <string> - Definition: Should contain "qcom,<soc>-pdc" + Definition: Should contain "qcom,<soc>-pdc" and "qcom,pdc" + - "qcom,sc7180-pdc": For SC7180 - "qcom,sdm845-pdc": For SDM845 - reg: |