diff options
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.c | 99 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.h | 4 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_ctl.c | 54 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_ctl.h | 10 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_scsih.c | 1 |
5 files changed, 136 insertions, 32 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 8761bc58d965..fc8c45e15235 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -5481,7 +5481,7 @@ mpt3sas_atto_validate_nvram(struct MPT3SAS_ADAPTER *ioc, * mpt3sas_atto_get_sas_addr - get the ATTO SAS address from mfg page 1 * * @ioc : per adapter object - * @*sas_addr : return sas address + * @sas_addr : return sas address * Return: 0 for success, non-zero for failure. */ static int @@ -7914,26 +7914,22 @@ mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type) } /** - * _base_diag_reset - the "big hammer" start of day reset - * @ioc: per adapter object - * - * Return: 0 for success, non-zero for failure. - */ -static int -_base_diag_reset(struct MPT3SAS_ADAPTER *ioc) -{ - u32 host_diagnostic; - u32 ioc_state; - u32 count; - u32 hcb_size; - - ioc_info(ioc, "sending diag reset !!\n"); - - pci_cfg_access_lock(ioc->pdev); +* mpt3sas_base_unlock_and_get_host_diagnostic- enable Host Diagnostic Register writes +* @ioc: per adapter object +* @host_diagnostic: host diagnostic register content +* +* Return: 0 for success, non-zero for failure. +*/ - drsprintk(ioc, ioc_info(ioc, "clear interrupts\n")); +int +mpt3sas_base_unlock_and_get_host_diagnostic(struct MPT3SAS_ADAPTER *ioc, + u32 *host_diagnostic) +{ + u32 count; + *host_diagnostic = 0; count = 0; + do { /* Write magic sequence to WriteSequence register * Loop until in diagnostic mode @@ -7952,30 +7948,67 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) if (count++ > 20) { ioc_info(ioc, - "Stop writing magic sequence after 20 retries\n"); + "Stop writing magic sequence after 20 retries\n"); _base_dump_reg_set(ioc); - goto out; + return -EFAULT; } - host_diagnostic = ioc->base_readl_ext_retry(&ioc->chip->HostDiagnostic); + *host_diagnostic = ioc->base_readl_ext_retry(&ioc->chip->HostDiagnostic); drsprintk(ioc, - ioc_info(ioc, "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n", - count, host_diagnostic)); + ioc_info(ioc, "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n", + count, *host_diagnostic)); - } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0); + } while ((*host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0); + return 0; +} - hcb_size = ioc->base_readl(&ioc->chip->HCBSize); +/** + * mpt3sas_base_lock_host_diagnostic: Disable Host Diagnostic Register writes + * @ioc: per adapter object + */ +void +mpt3sas_base_lock_host_diagnostic(struct MPT3SAS_ADAPTER *ioc) +{ + drsprintk(ioc, ioc_info(ioc, "disable writes to the diagnostic register\n")); + writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); +} + +/** + * _base_diag_reset - the "big hammer" start of day reset + * @ioc: per adapter object + * + * Return: 0 for success, non-zero for failure. + */ +static int +_base_diag_reset(struct MPT3SAS_ADAPTER *ioc) +{ + u32 host_diagnostic; + u32 ioc_state; + u32 count; + u32 hcb_size; + + ioc_info(ioc, "sending diag reset !!\n"); + + pci_cfg_access_lock(ioc->pdev); + + drsprintk(ioc, ioc_info(ioc, "clear interrupts\n")); + + mutex_lock(&ioc->hostdiag_unlock_mutex); + if (mpt3sas_base_unlock_and_get_host_diagnostic(ioc, &host_diagnostic)) + goto out; + + hcb_size = ioc->base_readl(&ioc->chip->HCBSize); drsprintk(ioc, ioc_info(ioc, "diag reset: issued\n")); writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER, &ioc->chip->HostDiagnostic); - /*This delay allows the chip PCIe hardware time to finish reset tasks*/ + /* This delay allows the chip PCIe hardware time to finish reset tasks */ msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000); /* Approximately 300 second max wait */ for (count = 0; count < (300000000 / - MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) { + MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) { host_diagnostic = ioc->base_readl_ext_retry(&ioc->chip->HostDiagnostic); @@ -7988,13 +8021,15 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER)) break; - msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC / 1000); + /* Wait to pass the second read delay window */ + msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC/1000); } if (host_diagnostic & MPI2_DIAG_HCB_MODE) { drsprintk(ioc, - ioc_info(ioc, "restart the adapter assuming the HCB Address points to good F/W\n")); + ioc_info(ioc, "restart the adapter assuming the\n" + "HCB Address points to good F/W\n")); host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK; host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW; writel(host_diagnostic, &ioc->chip->HostDiagnostic); @@ -8008,9 +8043,8 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET, &ioc->chip->HostDiagnostic); - drsprintk(ioc, - ioc_info(ioc, "disable writes to the diagnostic register\n")); - writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); + mpt3sas_base_lock_host_diagnostic(ioc); + mutex_unlock(&ioc->hostdiag_unlock_mutex); drsprintk(ioc, ioc_info(ioc, "Wait for FW to go to the READY state\n")); ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20); @@ -8028,6 +8062,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) out: pci_cfg_access_unlock(ioc->pdev); ioc_err(ioc, "diag reset: FAILED\n"); + mutex_unlock(&ioc->hostdiag_unlock_mutex); return -EFAULT; } diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 6d0bc8c66700..de60ef8a7908 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1366,6 +1366,7 @@ struct MPT3SAS_ADAPTER { u8 got_task_abort_from_ioctl; struct mutex reset_in_progress_mutex; + struct mutex hostdiag_unlock_mutex; spinlock_t ioc_reset_in_progress_lock; u8 ioc_link_reset_in_progress; @@ -1790,6 +1791,9 @@ void mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc); int mpt3sas_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num); void mpt3sas_base_pause_mq_polling(struct MPT3SAS_ADAPTER *ioc); void mpt3sas_base_resume_mq_polling(struct MPT3SAS_ADAPTER *ioc); +int mpt3sas_base_unlock_and_get_host_diagnostic(struct MPT3SAS_ADAPTER *ioc, + u32 *host_diagnostic); +void mpt3sas_base_lock_host_diagnostic(struct MPT3SAS_ADAPTER *ioc); /* scsih shared API */ struct scsi_cmnd *mpt3sas_scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 147cb7088d55..1c9fd26195b8 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -2543,6 +2543,56 @@ out: return 0; } +/** + * _ctl_enable_diag_sbr_reload - enable sbr reload bit + * @ioc: per adapter object + * @arg: user space buffer containing ioctl content + * + * Enable the SBR reload bit + */ +static int +_ctl_enable_diag_sbr_reload(struct MPT3SAS_ADAPTER *ioc, void __user *arg) +{ + u32 ioc_state, host_diagnostic; + + if (ioc->shost_recovery || + ioc->pci_error_recovery || ioc->is_driver_loading || + ioc->remove_host) + return -EAGAIN; + + ioc_state = mpt3sas_base_get_iocstate(ioc, 1); + + if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) + return -EFAULT; + + host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic); + + if (host_diagnostic & MPI2_DIAG_SBR_RELOAD) + return 0; + + if (mutex_trylock(&ioc->hostdiag_unlock_mutex)) { + if (mpt3sas_base_unlock_and_get_host_diagnostic(ioc, &host_diagnostic)) { + mutex_unlock(&ioc->hostdiag_unlock_mutex); + return -EFAULT; + } + } else + return -EAGAIN; + + host_diagnostic |= MPI2_DIAG_SBR_RELOAD; + writel(host_diagnostic, &ioc->chip->HostDiagnostic); + host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic); + mpt3sas_base_lock_host_diagnostic(ioc); + mutex_unlock(&ioc->hostdiag_unlock_mutex); + + if (!(host_diagnostic & MPI2_DIAG_SBR_RELOAD)) { + ioc_err(ioc, "%s: Failed to set Diag SBR Reload Bit\n", __func__); + return -EFAULT; + } + + ioc_info(ioc, "%s: Successfully set the Diag SBR Reload Bit\n", __func__); + return 0; +} + #ifdef CONFIG_COMPAT /** * _ctl_compat_mpt_command - convert 32bit pointers to 64bit. @@ -2719,6 +2769,10 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg, if (_IOC_SIZE(cmd) == sizeof(struct mpt3_addnl_diag_query)) ret = _ctl_addnl_diag_query(ioc, arg); break; + case MPT3ENABLEDIAGSBRRELOAD: + if (_IOC_SIZE(cmd) == sizeof(struct mpt3_enable_diag_sbr_reload)) + ret = _ctl_enable_diag_sbr_reload(ioc, arg); + break; default: dctlprintk(ioc, ioc_info(ioc, "unsupported ioctl opcode(0x%08x)\n", diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h index 8f6ffb40261c..171709e91006 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.h +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h @@ -98,6 +98,8 @@ struct mpt3_diag_read_buffer) #define MPT3ADDNLDIAGQUERY _IOWR(MPT3_MAGIC_NUMBER, 32, \ struct mpt3_addnl_diag_query) +#define MPT3ENABLEDIAGSBRRELOAD _IOWR(MPT3_MAGIC_NUMBER, 33, \ + struct mpt3_enable_diag_sbr_reload) /* Trace Buffer default UniqueId */ #define MPT2DIAGBUFFUNIQUEID (0x07075900) @@ -448,4 +450,12 @@ struct mpt3_addnl_diag_query { uint32_t reserved2[2]; }; +/** + * struct mpt3_enable_diag_sbr_reload - enable sbr reload + * @hdr - generic header + */ +struct mpt3_enable_diag_sbr_reload { + struct mpt3_ioctl_header hdr; +}; + #endif /* MPT3SAS_CTL_H_INCLUDED */ diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 51b5788da040..ef8ee93005ea 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -12240,6 +12240,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* misc semaphores and spin locks */ mutex_init(&ioc->reset_in_progress_mutex); + mutex_init(&ioc->hostdiag_unlock_mutex); /* initializing pci_access_mutex lock */ mutex_init(&ioc->pci_access_mutex); spin_lock_init(&ioc->ioc_reset_in_progress_lock); |