diff options
| -rw-r--r-- | arch/i386/Kconfig | 309 | ||||
| -rw-r--r-- | arch/i386/Kconfig.cpu | 309 | ||||
| -rw-r--r-- | arch/i386/Makefile | 31 | ||||
| -rw-r--r-- | arch/i386/Makefile.cpu | 33 | ||||
| -rw-r--r-- | arch/um/Kconfig | 6 | ||||
| -rw-r--r-- | arch/um/Makefile-i386 | 10 | ||||
| -rw-r--r-- | include/asm-um/cache.h | 19 |
7 files changed, 376 insertions, 341 deletions
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 35d3cff30057..5383e5e2d9b7 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -155,309 +155,7 @@ config ES7000_CLUSTERED_APIC default y depends on SMP && X86_ES7000 && MPENTIUMIII -if !X86_ELAN - -choice - prompt "Processor family" - default M686 - -config M386 - bool "386" - ---help--- - This is the processor type of your CPU. This information is used for - optimizing purposes. In order to compile a kernel that can run on - all x86 CPU types (albeit not optimally fast), you can specify - "386" here. - - The kernel will not necessarily run on earlier architectures than - the one you have chosen, e.g. a Pentium optimized kernel will run on - a PPro, but not necessarily on a i486. - - Here are the settings recommended for greatest speed: - - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI - 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels - will run on a 386 class machine. - - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or - SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. - - "586" for generic Pentium CPUs lacking the TSC - (time stamp counter) register. - - "Pentium-Classic" for the Intel Pentium. - - "Pentium-MMX" for the Intel Pentium MMX. - - "Pentium-Pro" for the Intel Pentium Pro. - - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron. - - "Pentium-III" for the Intel Pentium III or Coppermine Celeron. - - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron. - - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D). - - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird). - - "Crusoe" for the Transmeta Crusoe series. - - "Efficeon" for the Transmeta Efficeon series. - - "Winchip-C6" for original IDT Winchip. - - "Winchip-2" for IDT Winchip 2. - - "Winchip-2A" for IDT Winchips with 3dNow! capabilities. - - "GeodeGX1" for Geode GX1 (Cyrix MediaGX). - - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. - - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above). - - If you don't know what to do, choose "386". - -config M486 - bool "486" - help - Select this for a 486 series processor, either Intel or one of the - compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX, - DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or - U5S. - -config M586 - bool "586/K5/5x86/6x86/6x86MX" - help - Select this for an 586 or 686 series processor such as the AMD K5, - the Cyrix 5x86, 6x86 and 6x86MX. This choice does not - assume the RDTSC (Read Time Stamp Counter) instruction. - -config M586TSC - bool "Pentium-Classic" - help - Select this for a Pentium Classic processor with the RDTSC (Read - Time Stamp Counter) instruction for benchmarking. - -config M586MMX - bool "Pentium-MMX" - help - Select this for a Pentium with the MMX graphics/multimedia - extended instructions. - -config M686 - bool "Pentium-Pro" - help - Select this for Intel Pentium Pro chips. This enables the use of - Pentium Pro extended instructions, and disables the init-time guard - against the f00f bug found in earlier Pentiums. - -config MPENTIUMII - bool "Pentium-II/Celeron(pre-Coppermine)" - help - Select this for Intel chips based on the Pentium-II and - pre-Coppermine Celeron core. This option enables an unaligned - copy optimization, compiles the kernel with optimization flags - tailored for the chip, and applies any applicable Pentium Pro - optimizations. - -config MPENTIUMIII - bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon" - help - Select this for Intel chips based on the Pentium-III and - Celeron-Coppermine core. This option enables use of some - extended prefetch instructions in addition to the Pentium II - extensions. - -config MPENTIUMM - bool "Pentium M" - help - Select this for Intel Pentium M (not Pentium-4 M) - notebook chips. - -config MPENTIUM4 - bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon" - help - Select this for Intel Pentium 4 chips. This includes the - Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M - (not Pentium M) chips. This option enables compile flags - optimized for the chip, uses the correct cache shift, and - applies any applicable Pentium III optimizations. - -config MK6 - bool "K6/K6-II/K6-III" - help - Select this for an AMD K6-family processor. Enables use of - some extended instructions, and passes appropriate optimization - flags to GCC. - -config MK7 - bool "Athlon/Duron/K7" - help - Select this for an AMD Athlon K7-family processor. Enables use of - some extended instructions, and passes appropriate optimization - flags to GCC. - -config MK8 - bool "Opteron/Athlon64/Hammer/K8" - help - Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables - use of some extended instructions, and passes appropriate optimization - flags to GCC. - -config MCRUSOE - bool "Crusoe" - help - Select this for a Transmeta Crusoe processor. Treats the processor - like a 586 with TSC, and sets some GCC optimization flags (like a - Pentium Pro with no alignment requirements). - -config MEFFICEON - bool "Efficeon" - help - Select this for a Transmeta Efficeon processor. - -config MWINCHIPC6 - bool "Winchip-C6" - help - Select this for an IDT Winchip C6 chip. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment requirements. - -config MWINCHIP2 - bool "Winchip-2" - help - Select this for an IDT Winchip-2. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment requirements. - -config MWINCHIP3D - bool "Winchip-2A/Winchip-3" - help - Select this for an IDT Winchip-2A or 3. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment reqirements. Also enable out of order memory - stores for this CPU, which can increase performance of some - operations. - -config MGEODEGX1 - bool "GeodeGX1" - help - Select this for a Geode GX1 (Cyrix MediaGX) chip. - -config MCYRIXIII - bool "CyrixIII/VIA-C3" - help - Select this for a Cyrix III or C3 chip. Presently Linux and GCC - treat this chip as a generic 586. Whilst the CPU is 686 class, - it lacks the cmov extension which gcc assumes is present when - generating 686 code. - Note that Nehemiah (Model 9) and above will not boot with this - kernel due to them lacking the 3DNow! instructions used in earlier - incarnations of the CPU. - -config MVIAC3_2 - bool "VIA C3-2 (Nehemiah)" - help - Select this for a VIA C3 "Nehemiah". Selecting this enables usage - of SSE and tells gcc to treat the CPU as a 686. - Note, this kernel will not boot on older (pre model 9) C3s. - -endchoice - -config X86_GENERIC - bool "Generic x86 support" - help - Instead of just including optimizations for the selected - x86 variant (e.g. PII, Crusoe or Athlon), include some more - generic optimizations as well. This will make the kernel - perform better on x86 CPUs other than that selected. - - This is really intended for distributors who need more - generic optimizations. - -endif - -# -# Define implied options from the CPU selection here -# -config X86_CMPXCHG - bool - depends on !M386 - default y - -config X86_XADD - bool - depends on !M386 - default y - -config X86_L1_CACHE_SHIFT - int - default "7" if MPENTIUM4 || X86_GENERIC - default "4" if X86_ELAN || M486 || M386 - default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1 - default "6" if MK7 || MK8 || MPENTIUMM - -config RWSEM_GENERIC_SPINLOCK - bool - depends on M386 - default y - -config RWSEM_XCHGADD_ALGORITHM - bool - depends on !M386 - default y - -config GENERIC_CALIBRATE_DELAY - bool - default y - -config X86_PPRO_FENCE - bool - depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1 - default y - -config X86_F00F_BUG - bool - depends on M586MMX || M586TSC || M586 || M486 || M386 - default y - -config X86_WP_WORKS_OK - bool - depends on !M386 - default y - -config X86_INVLPG - bool - depends on !M386 - default y - -config X86_BSWAP - bool - depends on !M386 - default y - -config X86_POPAD_OK - bool - depends on !M386 - default y - -config X86_CMPXCHG64 - bool - depends on !M386 && !M486 - default y - -config X86_ALIGNMENT_16 - bool - depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 - default y - -config X86_GOOD_APIC - bool - depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON - default y - -config X86_INTEL_USERCOPY - bool - depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON - default y - -config X86_USE_PPRO_CHECKSUM - bool - depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON - default y - -config X86_USE_3DNOW - bool - depends on MCYRIXIII || MK7 - default y - -config X86_OOSTORE - bool - depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR - default y +source "arch/i386/Kconfig.cpu" config HPET_TIMER bool "HPET Timer Support" @@ -570,11 +268,6 @@ config X86_VISWS_APIC depends on X86_VISWS default y -config X86_TSC - bool - depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ - default y - config X86_MCE bool "Machine Check Exception" depends on !X86_VOYAGER diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu new file mode 100644 index 000000000000..53bbb3c008ee --- /dev/null +++ b/arch/i386/Kconfig.cpu @@ -0,0 +1,309 @@ +# Put here option for CPU selection and depending optimization +if !X86_ELAN + +choice + prompt "Processor family" + default M686 + +config M386 + bool "386" + ---help--- + This is the processor type of your CPU. This information is used for + optimizing purposes. In order to compile a kernel that can run on + all x86 CPU types (albeit not optimally fast), you can specify + "386" here. + + The kernel will not necessarily run on earlier architectures than + the one you have chosen, e.g. a Pentium optimized kernel will run on + a PPro, but not necessarily on a i486. + + Here are the settings recommended for greatest speed: + - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI + 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels + will run on a 386 class machine. + - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or + SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. + - "586" for generic Pentium CPUs lacking the TSC + (time stamp counter) register. + - "Pentium-Classic" for the Intel Pentium. + - "Pentium-MMX" for the Intel Pentium MMX. + - "Pentium-Pro" for the Intel Pentium Pro. + - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron. + - "Pentium-III" for the Intel Pentium III or Coppermine Celeron. + - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron. + - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D). + - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird). + - "Crusoe" for the Transmeta Crusoe series. + - "Efficeon" for the Transmeta Efficeon series. + - "Winchip-C6" for original IDT Winchip. + - "Winchip-2" for IDT Winchip 2. + - "Winchip-2A" for IDT Winchips with 3dNow! capabilities. + - "GeodeGX1" for Geode GX1 (Cyrix MediaGX). + - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. + - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above). + + If you don't know what to do, choose "386". + +config M486 + bool "486" + help + Select this for a 486 series processor, either Intel or one of the + compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX, + DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or + U5S. + +config M586 + bool "586/K5/5x86/6x86/6x86MX" + help + Select this for an 586 or 686 series processor such as the AMD K5, + the Cyrix 5x86, 6x86 and 6x86MX. This choice does not + assume the RDTSC (Read Time Stamp Counter) instruction. + +config M586TSC + bool "Pentium-Classic" + help + Select this for a Pentium Classic processor with the RDTSC (Read + Time Stamp Counter) instruction for benchmarking. + +config M586MMX + bool "Pentium-MMX" + help + Select this for a Pentium with the MMX graphics/multimedia + extended instructions. + +config M686 + bool "Pentium-Pro" + help + Select this for Intel Pentium Pro chips. This enables the use of + Pentium Pro extended instructions, and disables the init-time guard + against the f00f bug found in earlier Pentiums. + +config MPENTIUMII + bool "Pentium-II/Celeron(pre-Coppermine)" + help + Select this for Intel chips based on the Pentium-II and + pre-Coppermine Celeron core. This option enables an unaligned + copy optimization, compiles the kernel with optimization flags + tailored for the chip, and applies any applicable Pentium Pro + optimizations. + +config MPENTIUMIII + bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon" + help + Select this for Intel chips based on the Pentium-III and + Celeron-Coppermine core. This option enables use of some + extended prefetch instructions in addition to the Pentium II + extensions. + +config MPENTIUMM + bool "Pentium M" + help + Select this for Intel Pentium M (not Pentium-4 M) + notebook chips. + +config MPENTIUM4 + bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon" + help + Select this for Intel Pentium 4 chips. This includes the + Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M + (not Pentium M) chips. This option enables compile flags + optimized for the chip, uses the correct cache shift, and + applies any applicable Pentium III optimizations. + +config MK6 + bool "K6/K6-II/K6-III" + help + Select this for an AMD K6-family processor. Enables use of + some extended instructions, and passes appropriate optimization + flags to GCC. + +config MK7 + bool "Athlon/Duron/K7" + help + Select this for an AMD Athlon K7-family processor. Enables use of + some extended instructions, and passes appropriate optimization + flags to GCC. + +config MK8 + bool "Opteron/Athlon64/Hammer/K8" + help + Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables + use of some extended instructions, and passes appropriate optimization + flags to GCC. + +config MCRUSOE + bool "Crusoe" + help + Select this for a Transmeta Crusoe processor. Treats the processor + like a 586 with TSC, and sets some GCC optimization flags (like a + Pentium Pro with no alignment requirements). + +config MEFFICEON + bool "Efficeon" + help + Select this for a Transmeta Efficeon processor. + +config MWINCHIPC6 + bool "Winchip-C6" + help + Select this for an IDT Winchip C6 chip. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment requirements. + +config MWINCHIP2 + bool "Winchip-2" + help + Select this for an IDT Winchip-2. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment requirements. + +config MWINCHIP3D + bool "Winchip-2A/Winchip-3" + help + Select this for an IDT Winchip-2A or 3. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment reqirements. Also enable out of order memory + stores for this CPU, which can increase performance of some + operations. + +config MGEODEGX1 + bool "GeodeGX1" + help + Select this for a Geode GX1 (Cyrix MediaGX) chip. + +config MCYRIXIII + bool "CyrixIII/VIA-C3" + help + Select this for a Cyrix III or C3 chip. Presently Linux and GCC + treat this chip as a generic 586. Whilst the CPU is 686 class, + it lacks the cmov extension which gcc assumes is present when + generating 686 code. + Note that Nehemiah (Model 9) and above will not boot with this + kernel due to them lacking the 3DNow! instructions used in earlier + incarnations of the CPU. + +config MVIAC3_2 + bool "VIA C3-2 (Nehemiah)" + help + Select this for a VIA C3 "Nehemiah". Selecting this enables usage + of SSE and tells gcc to treat the CPU as a 686. + Note, this kernel will not boot on older (pre model 9) C3s. + +endchoice + +config X86_GENERIC + bool "Generic x86 support" + help + Instead of just including optimizations for the selected + x86 variant (e.g. PII, Crusoe or Athlon), include some more + generic optimizations as well. This will make the kernel + perform better on x86 CPUs other than that selected. + + This is really intended for distributors who need more + generic optimizations. + +endif + +# +# Define implied options from the CPU selection here +# +config X86_CMPXCHG + bool + depends on !M386 + default y + +config X86_XADD + bool + depends on !M386 + default y + +config X86_L1_CACHE_SHIFT + int + default "7" if MPENTIUM4 || X86_GENERIC + default "4" if X86_ELAN || M486 || M386 + default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1 + default "6" if MK7 || MK8 || MPENTIUMM + +config RWSEM_GENERIC_SPINLOCK + bool + depends on M386 + default y + +config RWSEM_XCHGADD_ALGORITHM + bool + depends on !M386 + default y + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config X86_PPRO_FENCE + bool + depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1 + default y + +config X86_F00F_BUG + bool + depends on M586MMX || M586TSC || M586 || M486 || M386 + default y + +config X86_WP_WORKS_OK + bool + depends on !M386 + default y + +config X86_INVLPG + bool + depends on !M386 + default y + +config X86_BSWAP + bool + depends on !M386 + default y + +config X86_POPAD_OK + bool + depends on !M386 + default y + +config X86_CMPXCHG64 + bool + depends on !M386 && !M486 + default y + +config X86_ALIGNMENT_16 + bool + depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 + default y + +config X86_GOOD_APIC + bool + depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON + default y + +config X86_INTEL_USERCOPY + bool + depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON + default y + +config X86_USE_PPRO_CHECKSUM + bool + depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON + default y + +config X86_USE_3DNOW + bool + depends on MCYRIXIII || MK7 + default y + +config X86_OOSTORE + bool + depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR + default y + +config X86_TSC + bool + depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ + default y diff --git a/arch/i386/Makefile b/arch/i386/Makefile index 09951990a622..d121ea18460f 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -34,35 +34,8 @@ CFLAGS += -pipe -msoft-float # prevent gcc from keeping the stack 16 byte aligned CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) -align := $(cc-option-align) -cflags-$(CONFIG_M386) += -march=i386 -cflags-$(CONFIG_M486) += -march=i486 -cflags-$(CONFIG_M586) += -march=i586 -cflags-$(CONFIG_M586TSC) += -march=i586 -cflags-$(CONFIG_M586MMX) += $(call cc-option,-march=pentium-mmx,-march=i586) -cflags-$(CONFIG_M686) += -march=i686 -cflags-$(CONFIG_MPENTIUMII) += -march=i686 $(call cc-option,-mtune=pentium2) -cflags-$(CONFIG_MPENTIUMIII) += -march=i686 $(call cc-option,-mtune=pentium3) -cflags-$(CONFIG_MPENTIUMM) += -march=i686 $(call cc-option,-mtune=pentium3) -cflags-$(CONFIG_MPENTIUM4) += -march=i686 $(call cc-option,-mtune=pentium4) -cflags-$(CONFIG_MK6) += -march=k6 -# Please note, that patches that add -march=athlon-xp and friends are pointless. -# They make zero difference whatsosever to performance at this time. -cflags-$(CONFIG_MK7) += $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4) -cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)) -cflags-$(CONFIG_MCRUSOE) += -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 -cflags-$(CONFIG_MEFFICEON) += -march=i686 $(call cc-option,-mtune=pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 -cflags-$(CONFIG_MWINCHIPC6) += $(call cc-option,-march=winchip-c6,-march=i586) -cflags-$(CONFIG_MWINCHIP2) += $(call cc-option,-march=winchip2,-march=i586) -cflags-$(CONFIG_MWINCHIP3D) += $(call cc-option,-march=winchip2,-march=i586) -cflags-$(CONFIG_MCYRIXIII) += $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 -cflags-$(CONFIG_MVIAC3_2) += $(call cc-option,-march=c3-2,-march=i686) - -# AMD Elan support -cflags-$(CONFIG_X86_ELAN) += -march=i486 - -# Geode GX1 support -cflags-$(CONFIG_MGEODEGX1) += $(call cc-option,-march=pentium-mmx,-march=i486) +# CPU-specific tuning. Anything which can be shared with UML should go here. +include $(srctree)/arch/i386/Makefile.cpu # -mregparm=3 works ok on gcc-3.0 and later # diff --git a/arch/i386/Makefile.cpu b/arch/i386/Makefile.cpu new file mode 100644 index 000000000000..86c7bb1b95e5 --- /dev/null +++ b/arch/i386/Makefile.cpu @@ -0,0 +1,33 @@ +# CPU tuning section - shared with UML. +# Must change only cflags-y (or [yn]), not CFLAGS! That makes a difference for UML. + +align := $(cc-option-align) +cflags-$(CONFIG_M386) += -march=i386 +cflags-$(CONFIG_M486) += -march=i486 +cflags-$(CONFIG_M586) += -march=i586 +cflags-$(CONFIG_M586TSC) += -march=i586 +cflags-$(CONFIG_M586MMX) += $(call cc-option,-march=pentium-mmx,-march=i586) +cflags-$(CONFIG_M686) += -march=i686 +cflags-$(CONFIG_MPENTIUMII) += -march=i686 $(call cc-option,-mtune=pentium2) +cflags-$(CONFIG_MPENTIUMIII) += -march=i686 $(call cc-option,-mtune=pentium3) +cflags-$(CONFIG_MPENTIUMM) += -march=i686 $(call cc-option,-mtune=pentium3) +cflags-$(CONFIG_MPENTIUM4) += -march=i686 $(call cc-option,-mtune=pentium4) +cflags-$(CONFIG_MK6) += -march=k6 +# Please note, that patches that add -march=athlon-xp and friends are pointless. +# They make zero difference whatsosever to performance at this time. +cflags-$(CONFIG_MK7) += $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4) +cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)) +cflags-$(CONFIG_MCRUSOE) += -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 +cflags-$(CONFIG_MEFFICEON) += -march=i686 $(call cc-option,-mtune=pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 +cflags-$(CONFIG_MWINCHIPC6) += $(call cc-option,-march=winchip-c6,-march=i586) +cflags-$(CONFIG_MWINCHIP2) += $(call cc-option,-march=winchip2,-march=i586) +cflags-$(CONFIG_MWINCHIP3D) += $(call cc-option,-march=winchip2,-march=i586) +cflags-$(CONFIG_MCYRIXIII) += $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 +cflags-$(CONFIG_MVIAC3_2) += $(call cc-option,-march=c3-2,-march=i686) + +# AMD Elan support +cflags-$(CONFIG_X86_ELAN) += -march=i486 + +# Geode GX1 support +cflags-$(CONFIG_MGEODEGX1) += $(call cc-option,-march=pentium-mmx,-march=i486) + diff --git a/arch/um/Kconfig b/arch/um/Kconfig index 684e1f8b2755..ceaf6e4d2855 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -40,6 +40,12 @@ config IRQ_RELEASE_METHOD bool default y +menu "Host processor type and features" + +source "arch/i386/Kconfig.cpu" + +endmenu + menu "UML-specific options" config MODE_TT diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index 2ee8a2858117..4a0b375101eb 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -32,3 +32,13 @@ CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH) ifneq ($(CONFIG_GPROF),y) ARCH_CFLAGS += -DUM_FASTCALL endif + +# First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y. +include $(srctree)/arch/i386/Makefile.cpu + +# prevent gcc from keeping the stack 16 byte aligned. Taken from i386. +cflags-y += $(call cc-option,-mpreferred-stack-boundary=2) + +CFLAGS += $(cflags-y) +USER_CFLAGS += $(cflags-y) + diff --git a/include/asm-um/cache.h b/include/asm-um/cache.h index 4b134fe8504e..a10602a5b2d6 100644 --- a/include/asm-um/cache.h +++ b/include/asm-um/cache.h @@ -1,10 +1,21 @@ #ifndef __UM_CACHE_H #define __UM_CACHE_H -/* These are x86 numbers */ -#define L1_CACHE_SHIFT 5 -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) +#include <linux/config.h> -#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */ +#if defined(CONFIG_UML_X86) && !defined(CONFIG_64BIT) +# define L1_CACHE_SHIFT (CONFIG_X86_L1_CACHE_SHIFT) +#elif defined(CONFIG_UML_X86) /* 64-bit */ +# define L1_CACHE_SHIFT 6 /* Should be 7 on Intel */ +#else +/* XXX: this was taken from x86, now it's completely random. Luckily only + * affects SMP padding. */ +# define L1_CACHE_SHIFT 5 +#endif + +/* XXX: this is valid for x86 and x86_64. */ +#define L1_CACHE_SHIFT_MAX 7 /* largest L1 which this arch supports */ + +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) #endif |