diff options
| -rw-r--r-- | MAINTAINERS | 8 | ||||
| -rw-r--r-- | drivers/phy/hisilicon/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/phy/hisilicon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/phy/hisilicon/phy-hi3660-usb3.c | 233 |
4 files changed, 252 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 1d308fd7afaa..eec8ef97f3b2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16079,6 +16079,14 @@ L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/roles/intel-xhci-usb-role-switch.c +USB IP DRIVER FOR HISILICON KIRIN +M: Yu Chen <chenyu56@huawei.com> +M: Binghui Wang <wangbinghui@hisilicon.com> +L: linux-usb@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt +F: drivers/phy/hisilicon/phy-hi3660-usb3.c + USB ISP116X DRIVER M: Olav Kongas <ok@artecdesign.ee> L: linux-usb@vger.kernel.org diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig index b40ee54a1a50..3c142f08987c 100644 --- a/drivers/phy/hisilicon/Kconfig +++ b/drivers/phy/hisilicon/Kconfig @@ -12,6 +12,16 @@ config PHY_HI6220_USB To compile this driver as a module, choose M here. +config PHY_HI3660_USB + tristate "hi3660 USB PHY support" + depends on (ARCH_HISI && ARM64) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the HISILICON HI3660 USB PHY. + + To compile this driver as a module, choose M here. + config PHY_HISTB_COMBPHY tristate "HiSilicon STB SoCs COMBPHY support" depends on (ARCH_HISI && ARM64) || COMPILE_TEST diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile index f662a4fe18d8..75ba64e2faf8 100644 --- a/drivers/phy/hisilicon/Makefile +++ b/drivers/phy/hisilicon/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o +obj-$(CONFIG_PHY_HI3660_USB) += phy-hi3660-usb3.o obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c new file mode 100644 index 000000000000..cc0af2c044d0 --- /dev/null +++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Phy provider for USB 3.0 controller on HiSilicon 3660 platform + * + * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd. + * http://www.huawei.com + * + * Authors: Yu Chen <chenyu56@huawei.com> + */ + +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define PERI_CRG_CLK_EN4 0x40 +#define PERI_CRG_CLK_DIS4 0x44 +#define GT_CLK_USB3OTG_REF BIT(0) +#define GT_ACLK_USB3OTG BIT(1) + +#define PERI_CRG_RSTEN4 0x90 +#define PERI_CRG_RSTDIS4 0x94 +#define IP_RST_USB3OTGPHY_POR BIT(3) +#define IP_RST_USB3OTG BIT(5) + +#define PERI_CRG_ISODIS 0x148 +#define USB_REFCLK_ISO_EN BIT(25) + +#define PCTRL_PERI_CTRL3 0x10 +#define PCTRL_PERI_CTRL3_MSK_START 16 +#define USB_TCXO_EN BIT(1) + +#define PCTRL_PERI_CTRL24 0x64 +#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25) + +#define USBOTG3_CTRL0 0x00 +#define SC_USB3PHY_ABB_GT_EN BIT(15) + +#define USBOTG3_CTRL2 0x08 +#define USBOTG3CTRL2_POWERDOWN_HSP BIT(0) +#define USBOTG3CTRL2_POWERDOWN_SSP BIT(1) + +#define USBOTG3_CTRL3 0x0C +#define USBOTG3_CTRL3_VBUSVLDEXT BIT(6) +#define USBOTG3_CTRL3_VBUSVLDEXTSEL BIT(5) + +#define USBOTG3_CTRL4 0x10 + +#define USBOTG3_CTRL7 0x1c +#define REF_SSP_EN BIT(16) + +/* This value config the default txtune parameter of the usb 2.0 phy */ +#define HI3660_USB_DEFAULT_PHY_PARAM 0x1c466e3 + +struct hi3660_priv { + struct device *dev; + struct regmap *peri_crg; + struct regmap *pctrl; + struct regmap *otg_bc; + u32 eye_diagram_param; +}; + +static int hi3660_phy_init(struct phy *phy) +{ + struct hi3660_priv *priv = phy_get_drvdata(phy); + u32 val, mask; + int ret; + + /* usb refclk iso disable */ + ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN); + if (ret) + goto out; + + /* enable usb_tcxo_en */ + val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START); + ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val); + if (ret) + goto out; + + /* assert phy */ + val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG; + ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val); + if (ret) + goto out; + + /* enable phy ref clk */ + val = SC_USB3PHY_ABB_GT_EN; + mask = val; + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val); + if (ret) + goto out; + + val = REF_SSP_EN; + mask = val; + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val); + if (ret) + goto out; + + /* exit from IDDQ mode */ + mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP; + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0); + if (ret) + goto out; + + /* delay for exit from IDDQ mode */ + usleep_range(100, 120); + + /* deassert phy */ + val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG; + ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val); + if (ret) + goto out; + + /* delay for phy deasserted */ + usleep_range(10000, 15000); + + /* fake vbus valid signal */ + val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL; + mask = val; + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val); + if (ret) + goto out; + + /* delay for vbus valid */ + usleep_range(100, 120); + + ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4, + priv->eye_diagram_param); + if (ret) + goto out; + + return 0; +out: + dev_err(priv->dev, "failed to init phy ret: %d\n", ret); + return ret; +} + +static int hi3660_phy_exit(struct phy *phy) +{ + struct hi3660_priv *priv = phy_get_drvdata(phy); + u32 val; + int ret; + + /* assert phy */ + val = IP_RST_USB3OTGPHY_POR; + ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val); + if (ret) + goto out; + + /* disable usb_tcxo_en */ + val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START; + ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val); + if (ret) + goto out; + + return 0; +out: + dev_err(priv->dev, "failed to exit phy ret: %d\n", ret); + return ret; +} + +static struct phy_ops hi3660_phy_ops = { + .init = hi3660_phy_init, + .exit = hi3660_phy_exit, + .owner = THIS_MODULE, +}; + +static int hi3660_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct phy *phy; + struct hi3660_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node, + "hisilicon,pericrg-syscon"); + if (IS_ERR(priv->peri_crg)) { + dev_err(dev, "no hisilicon,pericrg-syscon\n"); + return PTR_ERR(priv->peri_crg); + } + + priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node, + "hisilicon,pctrl-syscon"); + if (IS_ERR(priv->pctrl)) { + dev_err(dev, "no hisilicon,pctrl-syscon\n"); + return PTR_ERR(priv->pctrl); + } + + /* node of hi3660 phy is a sub-node of usb3_otg_bc */ + priv->otg_bc = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(priv->otg_bc)) { + dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n"); + return PTR_ERR(priv->otg_bc); + } + + if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param", + &(priv->eye_diagram_param))) + priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM; + + phy = devm_phy_create(dev, NULL, &hi3660_phy_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + phy_set_drvdata(phy, priv); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id hi3660_phy_of_match[] = { + {.compatible = "hisilicon,hi3660-usb-phy",}, + { } +}; +MODULE_DEVICE_TABLE(of, hi3660_phy_of_match); + +static struct platform_driver hi3660_phy_driver = { + .probe = hi3660_phy_probe, + .driver = { + .name = "hi3660-usb-phy", + .of_match_table = hi3660_phy_of_match, + } +}; +module_platform_driver(hi3660_phy_driver); + +MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver"); |