diff options
90 files changed, 1227 insertions, 2729 deletions
diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt index 40282e617913..8b1a4451422e 100644 --- a/Documentation/cpu-freq/cpu-drivers.txt +++ b/Documentation/cpu-freq/cpu-drivers.txt @@ -23,8 +23,8 @@ Contents: 1.1 Initialization 1.2 Per-CPU Initialization 1.3 verify -1.4 target or setpolicy? -1.5 target +1.4 target/target_index or setpolicy? +1.5 target/target_index 1.6 setpolicy 2. Frequency Table Helpers @@ -56,7 +56,8 @@ cpufreq_driver.init - A pointer to the per-CPU initialization cpufreq_driver.verify - A pointer to a "verification" function. cpufreq_driver.setpolicy _or_ -cpufreq_driver.target - See below on the differences. +cpufreq_driver.target/ +target_index - See below on the differences. And optionally @@ -66,7 +67,7 @@ cpufreq_driver.resume - A pointer to a per-CPU resume function which is called with interrupts disabled and _before_ the pre-suspend frequency and/or policy is restored by a call to - ->target or ->setpolicy. + ->target/target_index or ->setpolicy. cpufreq_driver.attr - A pointer to a NULL-terminated list of "struct freq_attr" which allow to @@ -103,8 +104,8 @@ policy->governor must contain the "default policy" for this CPU. A few moments later, cpufreq_driver.verify and either cpufreq_driver.setpolicy or - cpufreq_driver.target is called with - these values. + cpufreq_driver.target/target_index is called + with these values. For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the frequency table helpers might be helpful. See the section 2 for more information @@ -133,20 +134,28 @@ range) is within policy->min and policy->max. If necessary, increase policy->max first, and only if this is no solution, decrease policy->min. -1.4 target or setpolicy? +1.4 target/target_index or setpolicy? ---------------------------- Most cpufreq drivers or even most cpu frequency scaling algorithms only allow the CPU to be set to one frequency. For these, you use the -->target call. +->target/target_index call. Some cpufreq-capable processors switch the frequency between certain limits on their own. These shall use the ->setpolicy call -1.4. target +1.4. target/target_index ------------- +The target_index call has two arguments: struct cpufreq_policy *policy, +and unsigned int index (into the exposed frequency table). + +The CPUfreq driver must set the new frequency when called here. The +actual frequency must be determined by freq_table[index].frequency. + +Deprecated: +---------- The target call has three arguments: struct cpufreq_policy *policy, unsigned int target_frequency, unsigned int relation. diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt index 219970ba54b7..77ec21574fb1 100644 --- a/Documentation/cpu-freq/governors.txt +++ b/Documentation/cpu-freq/governors.txt @@ -40,7 +40,7 @@ Most cpufreq drivers (in fact, all except one, longrun) or even most cpu frequency scaling algorithms only offer the CPU to be set to one frequency. In order to offer dynamic frequency scaling, the cpufreq core must be able to tell these drivers of a "target frequency". So -these specific drivers will be transformed to offer a "->target" +these specific drivers will be transformed to offer a "->target/target_index" call instead of the existing "->setpolicy" call. For "longrun", all stays the same, though. @@ -71,7 +71,7 @@ CPU can be set to switch independently | CPU can only be set / the limits of policy->{min,max} / \ / \ - Using the ->setpolicy call, Using the ->target call, + Using the ->setpolicy call, Using the ->target/target_index call, the limits and the the frequency closest "policy" is set. to target_freq is set. It is assured that it diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt index 425c51d56aef..b8a907dc0169 100644 --- a/Documentation/power/opp.txt +++ b/Documentation/power/opp.txt @@ -42,7 +42,7 @@ We can represent these as three OPPs as the following {Hz, uV} tuples: OPP library provides a set of helper functions to organize and query the OPP information. The library is located in drivers/base/power/opp.c and the header -is located in include/linux/opp.h. OPP library can be enabled by enabling +is located in include/linux/pm_opp.h. OPP library can be enabled by enabling CONFIG_PM_OPP from power management menuconfig menu. OPP library depends on CONFIG_PM as certain SoCs such as Texas Instrument's OMAP framework allows to optionally boot at a certain OPP without needing cpufreq. @@ -71,14 +71,14 @@ operations until that OPP could be re-enabled if possible. OPP library facilitates this concept in it's implementation. The following operational functions operate only on available opps: -opp_find_freq_{ceil, floor}, opp_get_voltage, opp_get_freq, opp_get_opp_count -and opp_init_cpufreq_table +opp_find_freq_{ceil, floor}, dev_pm_opp_get_voltage, dev_pm_opp_get_freq, dev_pm_opp_get_opp_count +and dev_pm_opp_init_cpufreq_table -opp_find_freq_exact is meant to be used to find the opp pointer which can then -be used for opp_enable/disable functions to make an opp available as required. +dev_pm_opp_find_freq_exact is meant to be used to find the opp pointer which can then +be used for dev_pm_opp_enable/disable functions to make an opp available as required. WARNING: Users of OPP library should refresh their availability count using -get_opp_count if opp_enable/disable functions are invoked for a device, the +get_opp_count if dev_pm_opp_enable/disable functions are invoked for a device, the exact mechanism to trigger these or the notification mechanism to other dependent subsystems such as cpufreq are left to the discretion of the SoC specific framework which uses the OPP library. Similar care needs to be taken @@ -96,24 +96,24 @@ using RCU read locks. The opp_find_freq_{exact,ceil,floor}, opp_get_{voltage, freq, opp_count} fall into this category. opp_{add,enable,disable} are updaters which use mutex and implement it's own -RCU locking mechanisms. opp_init_cpufreq_table acts as an updater and uses +RCU locking mechanisms. dev_pm_opp_init_cpufreq_table acts as an updater and uses mutex to implment RCU updater strategy. These functions should *NOT* be called under RCU locks and other contexts that prevent blocking functions in RCU or mutex operations from working. 2. Initial OPP List Registration ================================ -The SoC implementation calls opp_add function iteratively to add OPPs per +The SoC implementation calls dev_pm_opp_add function iteratively to add OPPs per device. It is expected that the SoC framework will register the OPP entries optimally- typical numbers range to be less than 5. The list generated by registering the OPPs is maintained by OPP library throughout the device operation. The SoC framework can subsequently control the availability of the -OPPs dynamically using the opp_enable / disable functions. +OPPs dynamically using the dev_pm_opp_enable / disable functions. -opp_add - Add a new OPP for a specific domain represented by the device pointer. +dev_pm_opp_add - Add a new OPP for a specific domain represented by the device pointer. The OPP is defined using the frequency and voltage. Once added, the OPP is assumed to be available and control of it's availability can be done - with the opp_enable/disable functions. OPP library internally stores + with the dev_pm_opp_enable/disable functions. OPP library internally stores and manages this information in the opp struct. This function may be used by SoC framework to define a optimal list as per the demands of SoC usage environment. @@ -124,7 +124,7 @@ opp_add - Add a new OPP for a specific domain represented by the device pointer. soc_pm_init() { /* Do things */ - r = opp_add(mpu_dev, 1000000, 900000); + r = dev_pm_opp_add(mpu_dev, 1000000, 900000); if (!r) { pr_err("%s: unable to register mpu opp(%d)\n", r); goto no_cpufreq; @@ -143,44 +143,44 @@ functions return the matching pointer representing the opp if a match is found, else returns error. These errors are expected to be handled by standard error checks such as IS_ERR() and appropriate actions taken by the caller. -opp_find_freq_exact - Search for an OPP based on an *exact* frequency and +dev_pm_opp_find_freq_exact - Search for an OPP based on an *exact* frequency and availability. This function is especially useful to enable an OPP which is not available by default. Example: In a case when SoC framework detects a situation where a higher frequency could be made available, it can use this function to - find the OPP prior to call the opp_enable to actually make it available. + find the OPP prior to call the dev_pm_opp_enable to actually make it available. rcu_read_lock(); - opp = opp_find_freq_exact(dev, 1000000000, false); + opp = dev_pm_opp_find_freq_exact(dev, 1000000000, false); rcu_read_unlock(); /* dont operate on the pointer.. just do a sanity check.. */ if (IS_ERR(opp)) { pr_err("frequency not disabled!\n"); /* trigger appropriate actions.. */ } else { - opp_enable(dev,1000000000); + dev_pm_opp_enable(dev,1000000000); } NOTE: This is the only search function that operates on OPPs which are not available. -opp_find_freq_floor - Search for an available OPP which is *at most* the +dev_pm_opp_find_freq_floor - Search for an available OPP which is *at most* the provided frequency. This function is useful while searching for a lesser match OR operating on OPP information in the order of decreasing frequency. Example: To find the highest opp for a device: freq = ULONG_MAX; rcu_read_lock(); - opp_find_freq_floor(dev, &freq); + dev_pm_opp_find_freq_floor(dev, &freq); rcu_read_unlock(); -opp_find_freq_ceil - Search for an available OPP which is *at least* the +dev_pm_opp_find_freq_ceil - Search for an available OPP which is *at least* the provided frequency. This function is useful while searching for a higher match OR operating on OPP information in the order of increasing frequency. Example 1: To find the lowest opp for a device: freq = 0; rcu_read_lock(); - opp_find_freq_ceil(dev, &freq); + dev_pm_opp_find_freq_ceil(dev, &freq); rcu_read_unlock(); Example 2: A simplified implementation of a SoC cpufreq_driver->target: soc_cpufreq_target(..) @@ -188,7 +188,7 @@ opp_find_freq_ceil - Search for an available OPP which is *at least* the /* Do stuff like policy checks etc. */ /* Find the best frequency match for the req */ rcu_read_lock(); - opp = opp_find_freq_ceil(dev, &freq); + opp = dev_pm_opp_find_freq_ceil(dev, &freq); rcu_read_unlock(); if (!IS_ERR(opp)) soc_switch_to_freq_voltage(freq); @@ -208,34 +208,34 @@ as thermal considerations (e.g. don't use OPPx until the temperature drops). WARNING: Do not use these functions in interrupt context. -opp_enable - Make a OPP available for operation. +dev_pm_opp_enable - Make a OPP available for operation. Example: Lets say that 1GHz OPP is to be made available only if the SoC temperature is lower than a certain threshold. The SoC framework implementation might choose to do something as follows: if (cur_temp < temp_low_thresh) { /* Enable 1GHz if it was disabled */ rcu_read_lock(); - opp = opp_find_freq_exact(dev, 1000000000, false); + opp = dev_pm_opp_find_freq_exact(dev, 1000000000, false); rcu_read_unlock(); /* just error check */ if (!IS_ERR(opp)) - ret = opp_enable(dev, 1000000000); + ret = dev_pm_opp_enable(dev, 1000000000); else goto try_something_else; } -opp_disable - Make an OPP to be not available for operation +dev_pm_opp_disable - Make an OPP to be not available for operation Example: Lets say that 1GHz OPP is to be disabled if the temperature exceeds a threshold value. The SoC framework implementation might choose to do something as follows: if (cur_temp > temp_high_thresh) { /* Disable 1GHz if it was enabled */ rcu_read_lock(); - opp = opp_find_freq_exact(dev, 1000000000, true); + opp = dev_pm_opp_find_freq_exact(dev, 1000000000, true); rcu_read_unlock(); /* just error check */ if (!IS_ERR(opp)) - ret = opp_disable(dev, 1000000000); + ret = dev_pm_opp_disable(dev, 1000000000); else goto try_something_else; } @@ -247,7 +247,7 @@ information from the OPP structure is necessary. Once an OPP pointer is retrieved using the search functions, the following functions can be used by SoC framework to retrieve the information represented inside the OPP layer. -opp_get_voltage - Retrieve the voltage represented by the opp pointer. +dev_pm_opp_get_voltage - Retrieve the voltage represented by the opp pointer. Example: At a cpufreq transition to a different frequency, SoC framework requires to set the voltage represented by the OPP using the regulator framework to the Power Management chip providing the @@ -256,15 +256,15 @@ opp_get_voltage - Retrieve the voltage represented by the opp pointer. { /* do things */ rcu_read_lock(); - opp = opp_find_freq_ceil(dev, &freq); - v = opp_get_voltage(opp); + opp = dev_pm_opp_find_freq_ceil(dev, &freq); + v = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); if (v) regulator_set_voltage(.., v); /* do other things */ } -opp_get_freq - Retrieve the freq represented by the opp pointer. +dev_pm_opp_get_freq - Retrieve the freq represented by the opp pointer. Example: Lets say the SoC framework uses a couple of helper functions we could pass opp pointers instead of doing additional parameters to handle quiet a bit of data parameters. @@ -273,8 +273,8 @@ opp_get_freq - Retrieve the freq represented by the opp pointer. /* do things.. */ max_freq = ULONG_MAX; rcu_read_lock(); - max_opp = opp_find_freq_floor(dev,&max_freq); - requested_opp = opp_find_freq_ceil(dev,&freq); + max_opp = dev_pm_opp_find_freq_floor(dev,&max_freq); + requested_opp = dev_pm_opp_find_freq_ceil(dev,&freq); if (!IS_ERR(max_opp) && !IS_ERR(requested_opp)) r = soc_test_validity(max_opp, requested_opp); rcu_read_unlock(); @@ -282,25 +282,25 @@ opp_get_freq - Retrieve the freq represented by the opp pointer. } soc_test_validity(..) { - if(opp_get_voltage(max_opp) < opp_get_voltage(requested_opp)) + if(dev_pm_opp_get_voltage(max_opp) < dev_pm_opp_get_voltage(requested_opp)) return -EINVAL; - if(opp_get_freq(max_opp) < opp_get_freq(requested_opp)) + if(dev_pm_opp_get_freq(max_opp) < dev_pm_opp_get_freq(requested_opp)) return -EINVAL; /* do things.. */ } -opp_get_opp_count - Retrieve the number of available opps for a device +dev_pm_opp_get_opp_count - Retrieve the number of available opps for a device Example: Lets say a co-processor in the SoC needs to know the available frequencies in a table, the main processor can notify as following: soc_notify_coproc_available_frequencies() { /* Do things */ rcu_read_lock(); - num_available = opp_get_opp_count(dev); + num_available = dev_pm_opp_get_opp_count(dev); speeds = kzalloc(sizeof(u32) * num_available, GFP_KERNEL); /* populate the table in increasing order */ freq = 0; - while (!IS_ERR(opp = opp_find_freq_ceil(dev, &freq))) { + while (!IS_ERR(opp = dev_pm_opp_find_freq_ceil(dev, &freq))) { speeds[i] = freq; freq++; i++; @@ -313,7 +313,7 @@ opp_get_opp_count - Retrieve the number of available opps for a device 6. Cpufreq Table Generation =========================== -opp_init_cpufreq_table - cpufreq framework typically is initialized with +dev_pm_opp_init_cpufreq_table - cpufreq framework typically is initialized with cpufreq_frequency_table_cpuinfo which is provided with the list of frequencies that are available for operation. This function provides a ready to use conversion routine to translate the OPP layer's internal @@ -326,7 +326,7 @@ opp_init_cpufreq_table - cpufreq framework typically is initialized with soc_pm_init() { /* Do things */ - r = opp_init_cpufreq_table(dev, &freq_table); + r = dev_pm_opp_init_cpufreq_table(dev, &freq_table); if (!r) cpufreq_frequency_table_cpuinfo(policy, freq_table); /* Do other things */ @@ -336,7 +336,7 @@ opp_init_cpufreq_table - cpufreq framework typically is initialized with addition to CONFIG_PM as power management feature is required to dynamically scale voltage and frequency in a system. -opp_free_cpufreq_table - Free up the table allocated by opp_init_cpufreq_table +dev_pm_opp_free_cpufreq_table - Free up the table allocated by dev_pm_opp_init_cpufreq_table 7. Data Structures ================== @@ -358,16 +358,16 @@ accessed by various functions as described above. However, the structures representing the actual OPPs and domains are internal to the OPP library itself to allow for suitable abstraction reusable across systems. -struct opp - The internal data structure of OPP library which is used to +struct dev_pm_opp - The internal data structure of OPP library which is used to represent an OPP. In addition to the freq, voltage, availability information, it also contains internal book keeping information required for the OPP library to operate on. Pointer to this structure is provided back to the users such as SoC framework to be used as a identifier for OPP in the interactions with OPP layer. - WARNING: The struct opp pointer should not be parsed or modified by the - users. The defaults of for an instance is populated by opp_add, but the - availability of the OPP can be modified by opp_enable/disable functions. + WARNING: The struct dev_pm_opp pointer should not be parsed or modified by the + users. The defaults of for an instance is populated by dev_pm_opp_add, but the + availability of the OPP can be modified by dev_pm_opp_enable/disable functions. struct device - This is used to identify a domain to the OPP layer. The nature of the device and it's implementation is left to the user of @@ -377,19 +377,19 @@ Overall, in a simplistic view, the data structure operations is represented as following: Initialization / modification: - +-----+ /- opp_enable -opp_add --> | opp | <------- - | +-----+ \- opp_disable + +-----+ /- dev_pm_opp_enable +dev_pm_opp_add --> | opp | <------- + | +-----+ \- dev_pm_opp_disable \-------> domain_info(device) Search functions: - /-- opp_find_freq_ceil ---\ +-----+ -domain_info<---- opp_find_freq_exact -----> | opp | - \-- opp_find_freq_floor ---/ +-----+ + /-- dev_pm_opp_find_freq_ceil ---\ +-----+ +domain_info<---- dev_pm_opp_find_freq_exact -----> | opp | + \-- dev_pm_opp_find_freq_floor ---/ +-----+ Retrieval functions: -+-----+ /- opp_get_voltage ++-----+ /- dev_pm_opp_get_voltage | opp | <--- -+-----+ \- opp_get_freq ++-----+ \- dev_pm_opp_get_freq -domain_info <- opp_get_opp_count +domain_info <- dev_pm_opp_get_opp_count diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index e026b19b23ea..a075b3e0c5c7 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -40,7 +40,6 @@ config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" select ARCH_DAVINCI_DA8XX select ARCH_HAS_CPUFREQ - select CPU_FREQ_TABLE select CP_INTC config ARCH_DAVINCI_DA8XX diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 90372a21087f..699aabe296e1 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -25,7 +25,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/phy.h> #include <linux/reboot.h> #include <linux/regmap.h> @@ -226,7 +226,7 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev) val = readl_relaxed(base + OCOTP_CFG3); val >>= OCOTP_CFG3_SPEED_SHIFT; if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ) - if (opp_disable(cpu_dev, 1200000000)) + if (dev_pm_opp_disable(cpu_dev, 1200000000)) pr_warn("failed to disable 1.2 GHz OPP\n"); put_node: diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index f26918467efc..6432ab8d9207 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -25,7 +25,7 @@ #include <linux/gpio.h> #include <linux/input.h> #include <linux/gpio_keys.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/cpu.h> #include <linux/mtd/mtd.h> @@ -522,11 +522,11 @@ static int __init beagle_opp_init(void) return -ENODEV; } /* Enable MPU 1GHz and lower opps */ - r = opp_enable(mpu_dev, 800000000); + r = dev_pm_opp_enable(mpu_dev, 800000000); /* TODO: MPU 1GHz needs SR and ABB */ /* Enable IVA 800MHz and lower opps */ - r |= opp_enable(iva_dev, 660000000); + r |= dev_pm_opp_enable(iva_dev, 660000000); /* TODO: DSP 800MHz needs SR and ABB */ if (r) { pr_err("%s: failed to enable higher opp %d\n", @@ -535,8 +535,8 @@ static int __init beagle_opp_init(void) * Cleanup - disable the higher freqs - we dont care * about the results */ - opp_disable(mpu_dev, 800000000); - opp_disable(iva_dev, 660000000); + dev_pm_opp_disable(mpu_dev, 800000000); + dev_pm_opp_disable(iva_dev, 660000000); } } return 0; diff --git a/arch/arm/mach-omap2/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h index 67faa7b8fe92..1d777e63e05c 100644 --- a/arch/arm/mach-omap2/omap-pm.h +++ b/arch/arm/mach-omap2/omap-pm.h @@ -17,7 +17,7 @@ #include <linux/device.h> #include <linux/cpufreq.h> #include <linux/clk.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> /* * agent_id values for use with omap_pm_set_min_bus_tput(): diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index bd41d59a7cab..ec21e6eb03e1 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -17,7 +17,7 @@ * GNU General Public License for more details. */ #include <linux/module.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/cpu.h> #include "omap_device.h" @@ -81,14 +81,14 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, dev = &oh->od->pdev->dev; } - r = opp_add(dev, opp_def->freq, opp_def->u_volt); + r = dev_pm_opp_add(dev, opp_def->freq, opp_def->u_volt); if (r) { dev_err(dev, "%s: add OPP %ld failed for %s [%d] result=%d\n", __func__, opp_def->freq, opp_def->hwmod_name, i, r); } else { if (!opp_def->default_available) - r = opp_disable(dev, opp_def->freq); + r = dev_pm_opp_disable(dev, opp_def->freq); if (r) dev_err(dev, "%s: disable %ld failed for %s [%d] result=%d\n", __func__, opp_def->freq, diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index e742118fcfd2..2f569b3c3092 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/err.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/export.h> #include <linux/suspend.h> #include <linux/cpu.h> @@ -131,7 +131,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, { struct voltagedomain *voltdm; struct clk *clk; - struct opp *opp; + struct dev_pm_opp *opp; unsigned long freq, bootup_volt; struct device *dev; @@ -172,7 +172,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, clk_put(clk); rcu_read_lock(); - opp = opp_find_freq_ceil(dev, &freq); + opp = dev_pm_opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) { rcu_read_unlock(); pr_err("%s: unable to find boot up OPP for vdd_%s\n", @@ -180,7 +180,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, goto exit; } - bootup_volt = opp_get_voltage(opp); + bootup_volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); if (!bootup_volt) { pr_err("%s: unable to find voltage corresponding to the bootup OPP for vdd_%s\n", diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index a8427115ee07..96100dbf5a2e 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -615,14 +615,12 @@ endmenu config PXA25x bool select CPU_XSCALE - select CPU_FREQ_TABLE if CPU_FREQ help Select code specific to PXA21x/25x/26x variants config PXA27x bool select CPU_XSCALE - select CPU_FREQ_TABLE if CPU_FREQ help Select code specific to PXA27x variants @@ -635,7 +633,6 @@ config CPU_PXA26x config PXA3xx bool select CPU_XSC3 - select CPU_FREQ_TABLE if CPU_FREQ help Select code specific to PXA3xx variants diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index f25b6119e028..d4ea142c4edd 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -42,74 +42,31 @@ EXPORT_SYMBOL(reset_status); /* * This table is setup for a 3.6864MHz Crystal. */ -static const unsigned short cclk_frequency_100khz[NR_FREQS] = { - 590, /* 59.0 MHz */ - 737, /* 73.7 MHz */ - 885, /* 88.5 MHz */ - 1032, /* 103.2 MHz */ - 1180, /* 118.0 MHz */ - 1327, /* 132.7 MHz */ - 1475, /* 147.5 MHz */ - 1622, /* 162.2 MHz */ - 1769, /* 176.9 MHz */ - 1917, /* 191.7 MHz */ - 2064, /* 206.4 MHz */ - 2212, /* 221.2 MHz */ - 2359, /* 235.9 MHz */ - 2507, /* 250.7 MHz */ - 2654, /* 265.4 MHz */ - 2802 /* 280.2 MHz */ +struct cpufreq_frequency_table sa11x0_freq_table[NR_FREQS+1] = { + { .frequency = 59000, /* 59.0 MHz */}, + { .frequency = 73700, /* 73.7 MHz */}, + { .frequency = 88500, /* 88.5 MHz */}, + { .frequency = 103200, /* 103.2 MHz */}, + { .frequency = 118000, /* 118.0 MHz */}, + { .frequency = 132700, /* 132.7 MHz */}, + { .frequency = 147500, /* 147.5 MHz */}, + { .frequency = 162200, /* 162.2 MHz */}, + { .frequency = 176900, /* 176.9 MHz */}, + { .frequency = 191700, /* 191.7 MHz */}, + { .frequency = 206400, /* 206.4 MHz */}, + { .frequency = 221200, /* 221.2 MHz */}, + { .frequency = 235900, /* 235.9 MHz */}, + { .frequency = 250700, /* 250.7 MHz */}, + { .frequency = 265400, /* 265.4 MHz */}, + { .frequency = 280200, /* 280.2 MHz */}, + { .frequency = CPUFREQ_TABLE_END, }, }; -/* rounds up(!) */ -unsigned int sa11x0_freq_to_ppcr(unsigned int khz) -{ - int i; - - khz /= 100; - - for (i = 0; i < NR_FREQS; i++) - if (cclk_frequency_100khz[i] >= khz) - break; - - return i; -} - -unsigned int sa11x0_ppcr_to_freq(unsigned int idx) -{ - unsigned int freq = 0; - if (idx < NR_FREQS) - freq = cclk_frequency_100khz[idx] * 100; - return freq; -} - - -/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on - * this platform, anyway. - */ -int sa11x0_verify_speed(struct cpufreq_policy *policy) -{ - unsigned int tmp; - if (policy->cpu) - return -EINVAL; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - - /* make sure that at least one frequency is within the policy */ - tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100; - if (tmp > policy->max) - policy->max = tmp; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - - return 0; -} - unsigned int sa11x0_getspeed(unsigned int cpu) { if (cpu) return 0; - return cclk_frequency_100khz[PPCR & 0xf] * 100; + return sa11x0_freq_table[PPCR & 0xf].frequency; } /* diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index 9a33695c9492..0d92e119b36b 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -3,6 +3,7 @@ * * Author: Nicolas Pitre */ +#include <linux/cpufreq.h> #include <linux/reboot.h> extern void sa1100_timer_init(void); @@ -19,12 +20,8 @@ extern void sa11x0_init_late(void); extern void sa1110_mb_enable(void); extern void sa1110_mb_disable(void); -struct cpufreq_policy; - -extern unsigned int sa11x0_freq_to_ppcr(unsigned int khz); -extern int sa11x0_verify_speed(struct cpufreq_policy *policy); +extern struct cpufreq_frequency_table sa11x0_freq_table[]; extern unsigned int sa11x0_getspeed(unsigned int cpu); -extern unsigned int sa11x0_ppcr_to_freq(unsigned int idx); struct flash_platform_data; struct resource; diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 99a28d628297..7a3fc1af6944 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -34,7 +34,6 @@ config UX500_SOC_COMMON config UX500_SOC_DB8500 bool - select CPU_FREQ_TABLE if CPU_FREQ select MFD_DB8500_PRCMU select PINCTRL_DB8500 select PINCTRL_DB8540 diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index f78c9a2c7e28..eb382aedd9a2 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1429,7 +1429,6 @@ source "drivers/cpufreq/Kconfig" config BFIN_CPU_FREQ bool depends on CPU_FREQ - select CPU_FREQ_TABLE default y config CPU_VOLTAGE diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 02380bed189c..9c957c81c688 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -130,13 +130,11 @@ config SVINTO_SIM config ETRAXFS bool "ETRAX-FS-V32" - select CPU_FREQ_TABLE if CPU_FREQ help Support CRIS V32. config CRIS_MACH_ARTPEC3 bool "ARTPEC-3" - select CPU_FREQ_TABLE if CPU_FREQ help Support Axis ARTPEC-3. diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index ef89897c6043..fa4187418440 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -21,7 +21,7 @@ #include <linux/list.h> #include <linux/rculist.h> #include <linux/rcupdate.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/of.h> #include <linux/export.h> @@ -42,7 +42,7 @@ */ /** - * struct opp - Generic OPP description structure + * struct dev_pm_opp - Generic OPP description structure * @node: opp list node. The nodes are maintained throughout the lifetime * of boot. It is expected only an optimal set of OPPs are * added to the library by the SoC framework. @@ -59,7 +59,7 @@ * * This structure stores the OPP information for a given device. */ -struct opp { +struct dev_pm_opp { struct list_head node; bool available; @@ -136,7 +136,7 @@ static struct device_opp *find_device_opp(struct device *dev) } /** - * opp_get_voltage() - Gets the voltage corresponding to an available opp + * dev_pm_opp_get_voltage() - Gets the voltage corresponding to an available opp * @opp: opp for which voltage has to be returned for * * Return voltage in micro volt corresponding to the opp, else @@ -150,9 +150,9 @@ static struct device_opp *find_device_opp(struct device *dev) * prior to unlocking with rcu_read_unlock() to maintain the integrity of the * pointer. */ -unsigned long opp_get_voltage(struct opp *opp) +unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp) { - struct opp *tmp_opp; + struct dev_pm_opp *tmp_opp; unsigned long v = 0; tmp_opp = rcu_dereference(opp); @@ -163,10 +163,10 @@ unsigned long opp_get_voltage(struct opp *opp) return v; } -EXPORT_SYMBOL_GPL(opp_get_voltage); +EXPORT_SYMBOL_GPL(dev_pm_opp_get_voltage); /** - * opp_get_freq() - Gets the frequency corresponding to an available opp + * dev_pm_opp_get_freq() - Gets the frequency corresponding to an available opp * @opp: opp for which frequency has to be returned for * * Return frequency in hertz corresponding to the opp, else @@ -180,9 +180,9 @@ EXPORT_SYMBOL_GPL(opp_get_voltage); * prior to unlocking with rcu_read_unlock() to maintain the integrity of the * pointer. */ -unsigned long opp_get_freq(struct opp *opp) +unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp) { - struct opp *tmp_opp; + struct dev_pm_opp *tmp_opp; unsigned long f = 0; tmp_opp = rcu_dereference(opp); @@ -193,10 +193,10 @@ unsigned long opp_get_freq(struct opp *opp) return f; } -EXPORT_SYMBOL_GPL(opp_get_freq); +EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); /** - * opp_get_opp_count() - Get number of opps available in the opp list + * dev_pm_opp_get_opp_count() - Get number of opps available in the opp list * @dev: device for which we do this operation * * This function returns the number of available opps if there are any, @@ -206,10 +206,10 @@ EXPORT_SYMBOL_GPL(opp_get_freq); * internally references two RCU protected structures: device_opp and opp which * are safe as long as we are under a common RCU locked section. */ -int opp_get_opp_count(struct device *dev) +int dev_pm_opp_get_opp_count(struct device *dev) { struct device_opp *dev_opp; - struct opp *temp_opp; + struct dev_pm_opp *temp_opp; int count = 0; dev_opp = find_device_opp(dev); @@ -226,10 +226,10 @@ int opp_get_opp_count(struct device *dev) return count; } -EXPORT_SYMBOL_GPL(opp_get_opp_count); +EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count); /** - * opp_find_freq_exact() - search for an exact frequency + * dev_pm_opp_find_freq_exact() - search for an exact frequency * @dev: device for which we do this operation * @freq: frequency to search for * @available: true/false - match for available opp @@ -254,11 +254,12 @@ EXPORT_SYMBOL_GPL(opp_get_opp_count); * under the locked area. The pointer returned must be used prior to unlocking * with rcu_read_unlock() to maintain the integrity of the pointer. */ -struct opp *opp_find_freq_exact(struct device *dev, unsigned long freq, - bool available) +struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, + unsigned long freq, + bool available) { struct device_opp *dev_opp; - struct opp *temp_opp, *opp = ERR_PTR(-ERANGE); + struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); dev_opp = find_device_opp(dev); if (IS_ERR(dev_opp)) { @@ -277,10 +278,10 @@ struct opp *opp_find_freq_exact(struct device *dev, unsigned long freq, return opp; } -EXPORT_SYMBOL_GPL(opp_find_freq_exact); +EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_exact); /** - * opp_find_freq_ceil() - Search for an rounded ceil freq + * dev_pm_opp_find_freq_ceil() - Search for an rounded ceil freq * @dev: device for which we do this operation * @freq: Start frequency * @@ -300,10 +301,11 @@ EXPORT_SYMBOL_GPL(opp_find_freq_exact); * under the locked area. The pointer returned must be used prior to unlocking * with rcu_read_unlock() to maintain the integrity of the pointer. */ -struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq) +struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev, + unsigned long *freq) { struct device_opp *dev_opp; - struct opp *temp_opp, *opp = ERR_PTR(-ERANGE); + struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); if (!dev || !freq) { dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq); @@ -324,10 +326,10 @@ struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq) return opp; } -EXPORT_SYMBOL_GPL(opp_find_freq_ceil); +EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil); /** - * opp_find_freq_floor() - Search for a rounded floor freq + * dev_pm_opp_find_freq_floor() - Search for a rounded floor freq * @dev: device for which we do this operation * @freq: Start frequency * @@ -347,10 +349,11 @@ EXPORT_SYMBOL_GPL(opp_find_freq_ceil); * under the locked area. The pointer returned must be used prior to unlocking * with rcu_read_unlock() to maintain the integrity of the pointer. */ -struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq) +struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, + unsigned long *freq) { struct device_opp *dev_opp; - struct opp *temp_opp, *opp = ERR_PTR(-ERANGE); + struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE); if (!dev || !freq) { dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq); @@ -375,17 +378,17 @@ struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq) return opp; } -EXPORT_SYMBOL_GPL(opp_find_freq_floor); +EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor); /** - * opp_add() - Add an OPP table from a table definitions + * dev_pm_opp_add() - Add an OPP table from a table definitions * @dev: device for which we do this operation * @freq: Frequency in Hz for this OPP * @u_volt: Voltage in uVolts for this OPP * * This function adds an opp definition to the opp list and returns status. * The opp is made available by default and it can be controlled using - * opp_enable/disable functions. + * dev_pm_opp_enable/disable functions. * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function internally uses RCU updater strategy with mutex locks @@ -393,14 +396,14 @@ EXPORT_SYMBOL_GPL(opp_find_freq_floor); * that this function is *NOT* called under RCU protection or in contexts where * mutex cannot be locked. */ -int opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) +int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) { struct device_opp *dev_opp = NULL; - struct opp *opp, *new_opp; + struct dev_pm_opp *opp, *new_opp; struct list_head *head; /* allocate new OPP node */ - new_opp = kzalloc(sizeof(struct opp), GFP_KERNEL); + new_opp = kzalloc(sizeof(*new_opp), GFP_KERNEL); if (!new_opp) { dev_warn(dev, "%s: Unable to create new OPP node\n", __func__); return -ENOMEM; @@ -460,7 +463,7 @@ int opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_ADD, new_opp); return 0; } -EXPORT_SYMBOL_GPL(opp_add); +EXPORT_SYMBOL_GPL(dev_pm_opp_add); /** * opp_set_availability() - helper to set the availability of an opp @@ -485,11 +488,11 @@ static int opp_set_availability(struct device *dev, unsigned long freq, bool availability_req) { struct device_opp *tmp_dev_opp, *dev_opp = ERR_PTR(-ENODEV); - struct opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV); + struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV); int r = 0; /* keep the node allocated */ - new_opp = kmalloc(sizeof(struct opp), GFP_KERNEL); + new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL); if (!new_opp) { dev_warn(dev, "%s: Unable to create OPP\n", __func__); return -ENOMEM; @@ -552,13 +555,13 @@ unlock: } /** - * opp_enable() - Enable a specific OPP + * dev_pm_opp_enable() - Enable a specific OPP * @dev: device for which we do this operation * @freq: OPP frequency to enable * * Enables a provided opp. If the operation is valid, this returns 0, else the * corresponding error value. It is meant to be used for users an OPP available - * after being temporarily made unavailable with opp_disable. + * after being temporarily made unavailable with dev_pm_opp_disable. * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function indirectly uses RCU and mutex locks to keep the @@ -566,21 +569,21 @@ unlock: * this function is *NOT* called under RCU protection or in contexts where * mutex locking or synchronize_rcu() blocking calls cannot be used. */ -int opp_enable(struct device *dev, unsigned long freq) +int dev_pm_opp_enable(struct device *dev, unsigned long freq) { return opp_set_availability(dev, freq, true); } -EXPORT_SYMBOL_GPL(opp_enable); +EXPORT_SYMBOL_GPL(dev_pm_opp_enable); /** - * opp_disable() - Disable a specific OPP + * dev_pm_opp_disable() - Disable a specific OPP * @dev: device for which we do this operation * @freq: OPP frequency to disable * * Disables a provided opp. If the operation is valid, this returns * 0, else the corresponding error value. It is meant to be a temporary * control by users to make this OPP not available until the circumstances are - * right to make it available again (with a call to opp_enable). + * right to make it available again (with a call to dev_pm_opp_enable). * * Locking: The internal device_opp and opp structures are RCU protected. * Hence this function indirectly uses RCU and mutex locks to keep the @@ -588,15 +591,15 @@ EXPORT_SYMBOL_GPL(opp_enable); * this function is *NOT* called under RCU protection or in contexts where * mutex locking or synchronize_rcu() blocking calls cannot be used. */ -int opp_disable(struct device *dev, unsigned long freq) +int dev_pm_opp_disable(struct device *dev, unsigned long freq) { return opp_set_availability(dev, freq, false); } -EXPORT_SYMBOL_GPL(opp_disable); +EXPORT_SYMBOL_GPL(dev_pm_opp_disable); #ifdef CONFIG_CPU_FREQ /** - * opp_init_cpufreq_table() - create a cpufreq table for a device + * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device * @dev: device for which we do this operation * @table: Cpufreq table returned back to caller * @@ -619,11 +622,11 @@ EXPORT_SYMBOL_GPL(opp_disable); * Callers should ensure that this function is *NOT* called under RCU protection * or in contexts where mutex locking cannot be used. */ -int opp_init_cpufreq_table(struct device *dev, +int dev_pm_opp_init_cpufreq_table(struct device *dev, struct cpufreq_frequency_table **table) { struct device_opp *dev_opp; - struct opp *opp; + struct dev_pm_opp *opp; struct cpufreq_frequency_table *freq_table; int i = 0; @@ -639,7 +642,7 @@ int opp_init_cpufreq_table(struct device *dev, } freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * - (opp_get_opp_count(dev) + 1), GFP_KERNEL); + (dev_pm_opp_get_opp_count(dev) + 1), GFP_KERNEL); if (!freq_table) { mutex_unlock(&dev_opp_list_lock); dev_warn(dev, "%s: Unable to allocate frequency table\n", @@ -663,16 +666,16 @@ int opp_init_cpufreq_table(struct device *dev, return 0; } -EXPORT_SYMBOL_GPL(opp_init_cpufreq_table); +EXPORT_SYMBOL_GPL(dev_pm_opp_init_cpufreq_table); /** - * opp_free_cpufreq_table() - free the cpufreq table + * dev_pm_opp_free_cpufreq_table() - free the cpufreq table * @dev: device for which we do this operation * @table: table to free * - * Free up the table allocated by opp_init_cpufreq_table + * Free up the table allocated by dev_pm_opp_init_cpufreq_table */ -void opp_free_cpufreq_table(struct device *dev, +void dev_pm_opp_free_cpufreq_table(struct device *dev, struct cpufreq_frequency_table **table) { if (!table) @@ -681,14 +684,14 @@ void opp_free_cpufreq_table(struct device *dev, kfree(*table); *table = NULL; } -EXPORT_SYMBOL_GPL(opp_free_cpufreq_table); +EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table); #endif /* CONFIG_CPU_FREQ */ /** - * opp_get_notifier() - find notifier_head of the device with opp + * dev_pm_opp_get_notifier() - find notifier_head of the device with opp * @dev: device pointer used to lookup device OPPs. */ -struct srcu_notifier_head *opp_get_notifier(struct device *dev) +struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev) { struct device_opp *dev_opp = find_device_opp(dev); @@ -732,7 +735,7 @@ int of_init_opp_table(struct device *dev) unsigned long freq = be32_to_cpup(val++) * 1000; unsigned long volt = be32_to_cpup(val++); - if (opp_add(dev, freq, volt)) { + if (dev_pm_opp_add(dev, freq, volt)) { dev_warn(dev, "%s: Failed to add OPP %ld\n", __func__, freq); continue; diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 534fcb825153..38093e272377 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -17,15 +17,11 @@ config CPU_FREQ if CPU_FREQ -config CPU_FREQ_TABLE - tristate - config CPU_FREQ_GOV_COMMON bool config CPU_FREQ_STAT tristate "CPU frequency translation statistics" - select CPU_FREQ_TABLE default y help This driver exports CPU frequency statistics information through sysfs @@ -143,7 +139,6 @@ config CPU_FREQ_GOV_USERSPACE config CPU_FREQ_GOV_ONDEMAND tristate "'ondemand' cpufreq policy governor" - select CPU_FREQ_TABLE select CPU_FREQ_GOV_COMMON help 'ondemand' - This driver adds a dynamic cpufreq policy governor. @@ -187,7 +182,6 @@ config CPU_FREQ_GOV_CONSERVATIVE config GENERIC_CPUFREQ_CPU0 tristate "Generic CPU0 cpufreq driver" depends on HAVE_CLK && REGULATOR && PM_OPP && OF - select CPU_FREQ_TABLE help This adds a generic cpufreq driver for CPU0 frequency management. It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) @@ -223,7 +217,6 @@ depends on IA64 config IA64_ACPI_CPUFREQ tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE depends on ACPI_PROCESSOR help This driver adds a CPUFreq driver which utilizes the ACPI @@ -240,7 +233,6 @@ depends on MIPS config LOONGSON2_CPUFREQ tristate "Loongson2 CPUFreq Driver" - select CPU_FREQ_TABLE help This option adds a CPUFreq driver for loongson processors which support software configurable cpu frequency. @@ -262,7 +254,6 @@ menu "SPARC CPU frequency scaling drivers" depends on SPARC64 config SPARC_US3_CPUFREQ tristate "UltraSPARC-III CPU Frequency driver" - select CPU_FREQ_TABLE help This adds the CPUFreq driver for UltraSPARC-III processors. @@ -272,7 +263,6 @@ config SPARC_US3_CPUFREQ config SPARC_US2E_CPUFREQ tristate "UltraSPARC-IIe CPU Frequency driver" - select CPU_FREQ_TABLE help This adds the CPUFreq driver for UltraSPARC-IIe processors. @@ -285,7 +275,6 @@ menu "SH CPU Frequency scaling" depends on SUPERH config SH_CPU_FREQ tristate "SuperH CPU Frequency driver" - select CPU_FREQ_TABLE help This adds the cpufreq driver for SuperH. Any CPU that supports clock rate rounding through the clock framework can use this diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 0fa204b244bd..701ec95ce954 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -5,7 +5,6 @@ config ARM_BIG_LITTLE_CPUFREQ tristate "Generic ARM big LITTLE CPUfreq driver" depends on ARM_CPU_TOPOLOGY && PM_OPP && HAVE_CLK - select CPU_FREQ_TABLE help This enables the Generic CPUfreq driver for ARM big.LITTLE platforms. @@ -18,7 +17,6 @@ config ARM_DT_BL_CPUFREQ config ARM_EXYNOS_CPUFREQ bool - select CPU_FREQ_TABLE config ARM_EXYNOS4210_CPUFREQ bool "SAMSUNG EXYNOS4210" @@ -58,7 +56,6 @@ config ARM_EXYNOS5440_CPUFREQ depends on SOC_EXYNOS5440 depends on HAVE_CLK && PM_OPP && OF default y - select CPU_FREQ_TABLE help This adds the CPUFreq driver for Samsung EXYNOS5440 SoC. The nature of exynos5440 clock controller is @@ -85,7 +82,6 @@ config ARM_IMX6Q_CPUFREQ tristate "Freescale i.MX6Q cpufreq support" depends on SOC_IMX6Q depends on REGULATOR_ANATOP - select CPU_FREQ_TABLE help This adds cpufreq driver support for Freescale i.MX6Q SOC. @@ -101,7 +97,6 @@ config ARM_INTEGRATOR config ARM_KIRKWOOD_CPUFREQ def_bool ARCH_KIRKWOOD && OF - select CPU_FREQ_TABLE help This adds the CPUFreq driver for Marvell Kirkwood SoCs. @@ -110,7 +105,6 @@ config ARM_OMAP2PLUS_CPUFREQ bool "TI OMAP2+" depends on ARCH_OMAP2PLUS default ARCH_OMAP2PLUS - select CPU_FREQ_TABLE config ARM_S3C_CPUFREQ bool @@ -165,7 +159,6 @@ config ARM_S3C2412_CPUFREQ config ARM_S3C2416_CPUFREQ bool "S3C2416 CPU Frequency scaling support" depends on CPU_S3C2416 - select CPU_FREQ_TABLE help This adds the CPUFreq driver for the Samsung S3C2416 and S3C2450 SoC. The S3C2416 supports changing the rate of the @@ -196,7 +189,6 @@ config ARM_S3C2440_CPUFREQ config ARM_S3C64XX_CPUFREQ bool "Samsung S3C64XX" depends on CPU_S3C6410 - select CPU_FREQ_TABLE default y help This adds the CPUFreq driver for Samsung S3C6410 SoC. @@ -206,7 +198,6 @@ config ARM_S3C64XX_CPUFREQ config ARM_S5PV210_CPUFREQ bool "Samsung S5PV210 and S5PC110" depends on CPU_S5PV210 - select CPU_FREQ_TABLE default y help This adds the CPUFreq driver for Samsung S5PV210 and @@ -223,7 +214,6 @@ config ARM_SA1110_CPUFREQ config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR - select CPU_FREQ_TABLE default y help This adds the CPUFreq driver support for SPEAr SOCs. @@ -231,7 +221,6 @@ config ARM_SPEAR_CPUFREQ config ARM_TEGRA_CPUFREQ bool "TEGRA CPUFreq support" depends on ARCH_TEGRA - select CPU_FREQ_TABLE default y help This adds the CPUFreq driver support for TEGRA SOCs. diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc index 25ca9db62e09..ca0021a96e19 100644 --- a/drivers/cpufreq/Kconfig.powerpc +++ b/drivers/cpufreq/Kconfig.powerpc @@ -1,7 +1,6 @@ config CPU_FREQ_CBE tristate "CBE frequency scaling" depends on CBE_RAS && PPC_CELL - select CPU_FREQ_TABLE default m help This adds the cpufreq driver for Cell BE processors. @@ -20,7 +19,6 @@ config CPU_FREQ_CBE_PMI config CPU_FREQ_MAPLE bool "Support for Maple 970FX Evaluation Board" depends on PPC_MAPLE - select CPU_FREQ_TABLE help This adds support for frequency switching on Maple 970FX Evaluation Board and compatible boards (IBM JS2x blades). @@ -28,7 +26,6 @@ config CPU_FREQ_MAPLE config PPC_CORENET_CPUFREQ tristate "CPU frequency scaling driver for Freescale E500MC SoCs" depends on PPC_E500MC && OF && COMMON_CLK - select CPU_FREQ_TABLE select CLK_PPC_CORENET help This adds the CPUFreq driver support for Freescale e500mc, @@ -38,7 +35,6 @@ config PPC_CORENET_CPUFREQ config CPU_FREQ_PMAC bool "Support for Apple PowerBooks" depends on ADB_PMU && PPC32 - select CPU_FREQ_TABLE help This adds support for frequency switching on Apple PowerBooks, this currently includes some models of iBook & Titanium @@ -47,7 +43,6 @@ config CPU_FREQ_PMAC config CPU_FREQ_PMAC64 bool "Support for some Apple G5s" depends on PPC_PMAC && PPC64 - select CPU_FREQ_TABLE help This adds support for frequency switching on Apple iMac G5, and some of the more recent desktop G5 machines as well. @@ -55,7 +50,6 @@ config CPU_FREQ_PMAC64 config PPC_PASEMI_CPUFREQ bool "Support for PA Semi PWRficient" depends on PPC_PASEMI - select CPU_FREQ_TABLE default y help This adds the support for frequency switching on PA Semi diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index e2b6eabef221..6897ad85b046 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -31,7 +31,6 @@ config X86_PCC_CPUFREQ config X86_ACPI_CPUFREQ tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE depends on ACPI_PROCESSOR help This driver adds a CPUFreq driver which utilizes the ACPI @@ -60,7 +59,6 @@ config X86_ACPI_CPUFREQ_CPB config ELAN_CPUFREQ tristate "AMD Elan SC400 and SC410" - select CPU_FREQ_TABLE depends on MELAN ---help--- This adds the CPUFreq driver for AMD Elan SC400 and SC410 @@ -76,7 +74,6 @@ config ELAN_CPUFREQ config SC520_CPUFREQ tristate "AMD Elan SC520" - select CPU_FREQ_TABLE depends on MELAN ---help--- This adds the CPUFreq driver for AMD Elan SC520 processor. @@ -88,7 +85,6 @@ config SC520_CPUFREQ config X86_POWERNOW_K6 tristate "AMD Mobile K6-2/K6-3 PowerNow!" - select CPU_FREQ_TABLE depends on X86_32 help This adds the CPUFreq driver for mobile AMD K6-2+ and mobile @@ -100,7 +96,6 @@ config X86_POWERNOW_K6 config X86_POWERNOW_K7 tristate "AMD Mobile Athlon/Duron PowerNow!" - select CPU_FREQ_TABLE depends on X86_32 help This adds the CPUFreq driver for mobile AMD K7 mobile processors. @@ -118,7 +113,6 @@ config X86_POWERNOW_K7_ACPI config X86_POWERNOW_K8 tristate "AMD Opteron/Athlon64 PowerNow!" - select CPU_FREQ_TABLE depends on ACPI && ACPI_PROCESSOR && X86_ACPI_CPUFREQ help This adds the CPUFreq driver for K8/early Opteron/Athlon64 processors. @@ -132,7 +126,6 @@ config X86_POWERNOW_K8 config X86_AMD_FREQ_SENSITIVITY tristate "AMD frequency sensitivity feedback powersave bias" depends on CPU_FREQ_GOV_ONDEMAND && X86_ACPI_CPUFREQ && CPU_SUP_AMD - select CPU_FREQ_TABLE help This adds AMD-specific powersave bias function to the ondemand governor, which allows it to make more power-conscious frequency @@ -160,7 +153,6 @@ config X86_GX_SUSPMOD config X86_SPEEDSTEP_CENTRINO tristate "Intel Enhanced SpeedStep (deprecated)" - select CPU_FREQ_TABLE select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32 depends on X86_32 || (X86_64 && ACPI_PROCESSOR) help @@ -190,7 +182,6 @@ config X86_SPEEDSTEP_CENTRINO_TABLE config X86_SPEEDSTEP_ICH tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" - select CPU_FREQ_TABLE depends on X86_32 help This adds the CPUFreq driver for certain mobile Intel Pentium III @@ -204,7 +195,6 @@ config X86_SPEEDSTEP_ICH config X86_SPEEDSTEP_SMI tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" - select CPU_FREQ_TABLE depends on X86_32 help This adds the CPUFreq driver for certain mobile Intel Pentium III @@ -217,7 +207,6 @@ config X86_SPEEDSTEP_SMI config X86_P4_CLOCKMOD tristate "Intel Pentium 4 clock modulation" - select CPU_FREQ_TABLE help This adds the CPUFreq driver for Intel Pentium 4 / XEON processors. When enabled it will lower CPU temperature by skipping @@ -259,7 +248,6 @@ config X86_LONGRUN config X86_LONGHAUL tristate "VIA Cyrix III Longhaul" - select CPU_FREQ_TABLE depends on X86_32 && ACPI_PROCESSOR help This adds the CPUFreq driver for VIA Samuel/CyrixIII, @@ -272,7 +260,6 @@ config X86_LONGHAUL config X86_E_POWERSAVER tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)" - select CPU_FREQ_TABLE depends on X86_32 && ACPI_PROCESSOR help This adds the CPUFreq driver for VIA C7 processors. However, this driver diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index ad5866c2ada0..b7948bbbbf1f 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -1,5 +1,5 @@ # CPUfreq core -obj-$(CONFIG_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o freq_table.o # CPUfreq stats obj-$(CONFIG_CPU_FREQ_STAT) += cpufreq_stats.o @@ -11,9 +11,6 @@ obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o -# CPUfreq cross-arch helpers -obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o - obj-$(CONFIG_GENERIC_CPUFREQ_CPU0) += cpufreq-cpu0.o ################################################################################## diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 506fd23c7550..e4bc19552d2b 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -424,17 +424,17 @@ static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq, } static int acpi_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) + unsigned int index) { struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); struct acpi_processor_performance *perf; struct cpufreq_freqs freqs; struct drv_cmd cmd; - unsigned int next_state = 0; /* Index into freq_table */ unsigned int next_perf_state = 0; /* Index into perf table */ int result = 0; - pr_debug("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu); + pr_debug("acpi_cpufreq_target %d (%d)\n", + data->freq_table[index].frequency, policy->cpu); if (unlikely(data == NULL || data->acpi_data == NULL || data->freq_table == NULL)) { @@ -442,16 +442,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, } perf = data->acpi_data; - result = cpufreq_frequency_table_target(policy, - data->freq_table, - target_freq, - relation, &next_state); - if (unlikely(result)) { - result = -ENODEV; - goto out; - } - - next_perf_state = data->freq_table[next_state].driver_data; + next_perf_state = data->freq_table[index].driver_data; if (perf->state == next_perf_state) { if (unlikely(data->resume)) { pr_debug("Called after resume, resetting to P%d\n", @@ -493,7 +484,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, cmd.mask = cpumask_of(policy->cpu); freqs.old = perf->states[perf->state].core_frequency * 1000; - freqs.new = data->freq_table[next_state].frequency; + freqs.new = data->freq_table[index].frequency; cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); drv_write(&cmd); @@ -516,15 +507,6 @@ out: return result; } -static int acpi_cpufreq_verify(struct cpufreq_policy *policy) -{ - struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); - - pr_debug("acpi_cpufreq_verify\n"); - - return cpufreq_frequency_table_verify(policy, data->freq_table); -} - static unsigned long acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu) { @@ -837,7 +819,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END; perf->state = 0; - result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table); + result = cpufreq_table_validate_and_show(policy, data->freq_table); if (result) goto err_freqfree; @@ -846,12 +828,16 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) switch (perf->control_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: - /* Current speed is unknown and not detectable by IO port */ + /* + * The core will not set policy->cur, because + * cpufreq_driver->get is NULL, so we need to set it here. + * However, we have to guess it, because the current speed is + * unknown and not detectable via IO ports. + */ policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu); break; case ACPI_ADR_SPACE_FIXED_HARDWARE: acpi_cpufreq_driver.get = get_cur_freq_on_cpu; - policy->cur = get_cur_freq_on_cpu(cpu); break; default: break; @@ -868,8 +854,6 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) (u32) perf->states[i].power, (u32) perf->states[i].transition_latency); - cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); - /* * the first call to ->target() should result in us actually * writing something to the appropriate registers. @@ -929,8 +913,8 @@ static struct freq_attr *acpi_cpufreq_attr[] = { }; static struct cpufreq_driver acpi_cpufreq_driver = { - .verify = acpi_cpufreq_verify, - .target = acpi_cpufreq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = acpi_cpufreq_target, .bios_limit = acpi_processor_get_bios_limit, .init = acpi_cpufreq_cpu_init, .exit = acpi_cpufreq_cpu_exit, diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c index 3549f0784af1..163e3378fe17 100644 --- a/drivers/cpufreq/arm_big_little.c +++ b/drivers/cpufreq/arm_big_little.c @@ -25,7 +25,7 @@ #include <linux/cpumask.h> #include <linux/export.h> #include <linux/of_platform.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/slab.h> #include <linux/topology.h> #include <linux/types.h> @@ -47,38 +47,23 @@ static unsigned int bL_cpufreq_get(unsigned int cpu) return clk_get_rate(clk[cur_cluster]) / 1000; } -/* Validate policy frequency range */ -static int bL_cpufreq_verify_policy(struct cpufreq_policy *policy) -{ - u32 cur_cluster = cpu_to_cluster(policy->cpu); - - return cpufreq_frequency_table_verify(policy, freq_table[cur_cluster]); -} - /* Set clock frequency */ static int bL_cpufreq_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) + unsigned int index) { struct cpufreq_freqs freqs; - u32 cpu = policy->cpu, freq_tab_idx, cur_cluster; + u32 cpu = policy->cpu, cur_cluster; int ret = 0; cur_cluster = cpu_to_cluster(policy->cpu); freqs.old = bL_cpufreq_get(policy->cpu); - - /* Determine valid target frequency using freq_table */ - cpufreq_frequency_table_target(policy, freq_table[cur_cluster], - target_freq, relation, &freq_tab_idx); - freqs.new = freq_table[cur_cluster][freq_tab_idx].frequency; + freqs.new = freq_table[cur_cluster][index].frequency; pr_debug("%s: cpu: %d, cluster: %d, oldfreq: %d, target freq: %d, new freq: %d\n", - __func__, cpu, cur_cluster, freqs.old, target_freq, + __func__, cpu, cur_cluster, freqs.old, freqs.new, freqs.new); - if (freqs.old == freqs.new) - return 0; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); ret = clk_set_rate(clk[cur_cluster], freqs.new * 1000); @@ -98,7 +83,7 @@ static void put_cluster_clk_and_freq_table(struct device *cpu_dev) if (!atomic_dec_return(&cluster_usage[cluster])) { clk_put(clk[cluster]); - opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]); dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster); } } @@ -119,7 +104,7 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev) goto atomic_dec; } - ret = opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]); + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]); if (ret) { dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d, err: %d\n", __func__, cpu_dev->id, ret); @@ -127,7 +112,7 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev) } name[12] = cluster + '0'; - clk[cluster] = clk_get_sys(name, NULL); + clk[cluster] = clk_get(cpu_dev, name); if (!IS_ERR(clk[cluster])) { dev_dbg(cpu_dev, "%s: clk: %p & freq table: %p, cluster: %d\n", __func__, clk[cluster], freq_table[cluster], @@ -138,7 +123,7 @@ static int get_cluster_clk_and_freq_table(struct device *cpu_dev) dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d, cluster: %d\n", __func__, cpu_dev->id, cluster); ret = PTR_ERR(clk[cluster]); - opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]); atomic_dec: atomic_dec(&cluster_usage[cluster]); @@ -165,7 +150,7 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy) if (ret) return ret; - ret = cpufreq_frequency_table_cpuinfo(policy, freq_table[cur_cluster]); + ret = cpufreq_table_validate_and_show(policy, freq_table[cur_cluster]); if (ret) { dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n", policy->cpu, cur_cluster); @@ -173,16 +158,12 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy) return ret; } - cpufreq_frequency_table_get_attr(freq_table[cur_cluster], policy->cpu); - if (arm_bL_ops->get_transition_latency) policy->cpuinfo.transition_latency = arm_bL_ops->get_transition_latency(cpu_dev); else policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = bL_cpufreq_get(policy->cpu); - cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu)); dev_info(cpu_dev, "%s: CPU %d initialized\n", __func__, policy->cpu); @@ -200,28 +181,23 @@ static int bL_cpufreq_exit(struct cpufreq_policy *policy) return -ENODEV; } + cpufreq_frequency_table_put_attr(policy->cpu); put_cluster_clk_and_freq_table(cpu_dev); dev_dbg(cpu_dev, "%s: Exited, cpu: %d\n", __func__, policy->cpu); return 0; } -/* Export freq_table to sysfs */ -static struct freq_attr *bL_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver bL_cpufreq_driver = { .name = "arm-big-little", - .flags = CPUFREQ_STICKY, - .verify = bL_cpufreq_verify_policy, - .target = bL_cpufreq_set_target, + .flags = CPUFREQ_STICKY | + CPUFREQ_HAVE_GOVERNOR_PER_POLICY, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = bL_cpufreq_set_target, .get = bL_cpufreq_get, .init = bL_cpufreq_init, .exit = bL_cpufreq_exit, - .have_governor_per_policy = true, - .attr = bL_cpufreq_attr, + .attr = cpufreq_generic_attr, }; int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops) diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c index 480c0bd0468d..8d9d59108906 100644 --- a/drivers/cpufreq/arm_big_little_dt.c +++ b/drivers/cpufreq/arm_big_little_dt.c @@ -24,7 +24,7 @@ #include <linux/export.h> #include <linux/module.h> #include <linux/of_device.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/types.h> diff --git a/drivers/cpufreq/at32ap-cpufreq.c b/drivers/cpufreq/at32ap-cpufreq.c index e0c38d938997..81d07527bde6 100644 --- a/drivers/cpufreq/at32ap-cpufreq.c +++ b/drivers/cpufreq/at32ap-cpufreq.c @@ -19,18 +19,10 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/export.h> +#include <linux/slab.h> static struct clk *cpuclk; - -static int at32_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - return 0; -} +static struct cpufreq_frequency_table *freq_table; static unsigned int at32_get_speed(unsigned int cpu) { @@ -43,25 +35,12 @@ static unsigned int at32_get_speed(unsigned int cpu) static unsigned int ref_freq; static unsigned long loops_per_jiffy_ref; -static int at32_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int at32_set_target(struct cpufreq_policy *policy, unsigned int index) { struct cpufreq_freqs freqs; - long freq; - - /* Convert target_freq from kHz to Hz */ - freq = clk_round_rate(cpuclk, target_freq * 1000); - - /* Check if policy->min <= new_freq <= policy->max */ - if(freq < (policy->min * 1000) || freq > (policy->max * 1000)) - return -EINVAL; - - pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000); freqs.old = at32_get_speed(0); - freqs.new = (freq + 500) / 1000; - freqs.flags = 0; + freqs.new = freq_table[index].frequency; if (!ref_freq) { ref_freq = freqs.old; @@ -72,45 +51,82 @@ static int at32_set_target(struct cpufreq_policy *policy, if (freqs.old < freqs.new) boot_cpu_data.loops_per_jiffy = cpufreq_scale( loops_per_jiffy_ref, ref_freq, freqs.new); - clk_set_rate(cpuclk, freq); + clk_set_rate(cpuclk, freqs.new * 1000); if (freqs.new < freqs.old) boot_cpu_data.loops_per_jiffy = cpufreq_scale( loops_per_jiffy_ref, ref_freq, freqs.new); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - pr_debug("cpufreq: set frequency %lu Hz\n", freq); + pr_debug("cpufreq: set frequency %u Hz\n", freqs.new * 1000); return 0; } static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy) { + unsigned int frequency, rate, min_freq; + int retval, steps, i; + if (policy->cpu != 0) return -EINVAL; cpuclk = clk_get(NULL, "cpu"); if (IS_ERR(cpuclk)) { pr_debug("cpufreq: could not get CPU clk\n"); - return PTR_ERR(cpuclk); + retval = PTR_ERR(cpuclk); + goto out_err; } - policy->cpuinfo.min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000; - policy->cpuinfo.max_freq = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; + min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000; + frequency = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; policy->cpuinfo.transition_latency = 0; - policy->cur = at32_get_speed(0); - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - printk("cpufreq: AT32AP CPU frequency driver\n"); + /* + * AVR32 CPU frequency rate scales in power of two between maximum and + * minimum, also add space for the table end marker. + * + * Further validate that the frequency is usable, and append it to the + * frequency table. + */ + steps = fls(frequency / min_freq) + 1; + freq_table = kzalloc(steps * sizeof(struct cpufreq_frequency_table), + GFP_KERNEL); + if (!freq_table) { + retval = -ENOMEM; + goto out_err_put_clk; + } - return 0; + for (i = 0; i < (steps - 1); i++) { + rate = clk_round_rate(cpuclk, frequency * 1000) / 1000; + + if (rate != frequency) + freq_table[i].frequency = CPUFREQ_ENTRY_INVALID; + else + freq_table[i].frequency = frequency; + + frequency /= 2; + } + + freq_table[steps - 1].frequency = CPUFREQ_TABLE_END; + + retval = cpufreq_table_validate_and_show(policy, freq_table); + if (!retval) { + printk("cpufreq: AT32AP CPU frequency driver\n"); + return 0; + } + + kfree(freq_table); +out_err_put_clk: + clk_put(cpuclk); +out_err: + return retval; } static struct cpufreq_driver at32_driver = { .name = "at32ap", .init = at32_cpufreq_driver_init, - .verify = at32_verify_speed, - .target = at32_set_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = at32_set_target, .get = at32_get_speed, .flags = CPUFREQ_STICKY, }; diff --git a/drivers/cpufreq/blackfin-cpufreq.c b/drivers/cpufreq/blackfin-cpufreq.c index ef05978a7237..12528b28d45d 100644 --- a/drivers/cpufreq/blackfin-cpufreq.c +++ b/drivers/cpufreq/blackfin-cpufreq.c @@ -127,14 +127,11 @@ unsigned long cpu_set_cclk(int cpu, unsigned long new) } #endif -static int bfin_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) +static int bfin_target(struct cpufreq_policy *policy, unsigned int index) { #ifndef CONFIG_BF60x unsigned int plldiv; #endif - unsigned int index; - unsigned long cclk_hz; struct cpufreq_freqs freqs; static unsigned long lpj_ref; static unsigned int lpj_ref_freq; @@ -144,17 +141,11 @@ static int bfin_target(struct cpufreq_policy *policy, cycles_t cycles; #endif - if (cpufreq_frequency_table_target(policy, bfin_freq_table, target_freq, - relation, &index)) - return -EINVAL; - - cclk_hz = bfin_freq_table[index].frequency; - freqs.old = bfin_getfreq_khz(0); - freqs.new = cclk_hz; + freqs.new = bfin_freq_table[index].frequency; pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n", - cclk_hz, target_freq, freqs.old); + freqs.new, freqs.new, freqs.old); cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); #ifndef CONFIG_BF60x @@ -191,11 +182,6 @@ static int bfin_target(struct cpufreq_policy *policy, return ret; } -static int bfin_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, bfin_freq_table); -} - static int __bfin_cpu_init(struct cpufreq_policy *policy) { @@ -209,23 +195,17 @@ static int __bfin_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.transition_latency = 50000; /* 50us assumed */ - policy->cur = cclk; - cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table); + return cpufreq_table_validate_and_show(policy, bfin_freq_table); } -static struct freq_attr *bfin_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver bfin_driver = { - .verify = bfin_verify_speed, - .target = bfin_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = bfin_target, .get = bfin_getfreq_khz, .init = __bfin_cpu_init, + .exit = cpufreq_generic_exit, .name = "bfin cpufreq", - .attr = bfin_freq_attr, + .attr = cpufreq_generic_attr, }; static int __init bfin_cpu_init(void) diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index c522a95c0e16..4dbe7efd86e5 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -17,7 +17,7 @@ #include <linux/err.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> @@ -30,34 +30,19 @@ static struct clk *cpu_clk; static struct regulator *cpu_reg; static struct cpufreq_frequency_table *freq_table; -static int cpu0_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, freq_table); -} - static unsigned int cpu0_get_speed(unsigned int cpu) { return clk_get_rate(cpu_clk) / 1000; } -static int cpu0_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) +static int cpu0_set_target(struct cpufreq_policy *policy, unsigned int index) { struct cpufreq_freqs freqs; - struct opp *opp; + struct dev_pm_opp *opp; unsigned long volt = 0, volt_old = 0, tol = 0; long freq_Hz, freq_exact; - unsigned int index; int ret; - ret = cpufreq_frequency_table_target(policy, freq_table, target_freq, - relation, &index); - if (ret) { - pr_err("failed to match target freqency %d: %d\n", - target_freq, ret); - return ret; - } - freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000); if (freq_Hz < 0) freq_Hz = freq_table[index].frequency * 1000; @@ -65,14 +50,11 @@ static int cpu0_set_target(struct cpufreq_policy *policy, freqs.new = freq_Hz / 1000; freqs.old = clk_get_rate(cpu_clk) / 1000; - if (freqs.old == freqs.new) - return 0; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); if (!IS_ERR(cpu_reg)) { rcu_read_lock(); - opp = opp_find_freq_ceil(cpu_dev, &freq_Hz); + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz); if (IS_ERR(opp)) { rcu_read_unlock(); pr_err("failed to find OPP for %ld\n", freq_Hz); @@ -80,7 +62,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy, ret = PTR_ERR(opp); goto post_notify; } - volt = opp_get_voltage(opp); + volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); tol = volt * voltage_tolerance / 100; volt_old = regulator_get_voltage(cpu_reg); @@ -127,50 +109,18 @@ post_notify: static int cpu0_cpufreq_init(struct cpufreq_policy *policy) { - int ret; - - ret = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (ret) { - pr_err("invalid frequency table: %d\n", ret); - return ret; - } - - policy->cpuinfo.transition_latency = transition_latency; - policy->cur = clk_get_rate(cpu_clk) / 1000; - - /* - * The driver only supports the SMP configuartion where all processors - * share the clock and voltage and clock. Use cpufreq affected_cpus - * interface to have all CPUs scaled together. - */ - cpumask_setall(policy->cpus); - - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - - return 0; + return cpufreq_generic_init(policy, freq_table, transition_latency); } -static int cpu0_cpufreq_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - - return 0; -} - -static struct freq_attr *cpu0_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver cpu0_cpufreq_driver = { .flags = CPUFREQ_STICKY, - .verify = cpu0_verify_speed, - .target = cpu0_set_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = cpu0_set_target, .get = cpu0_get_speed, .init = cpu0_cpufreq_init, - .exit = cpu0_cpufreq_exit, + .exit = cpufreq_generic_exit, .name = "generic_cpu0", - .attr = cpu0_cpufreq_attr, + .attr = cpufreq_generic_attr, }; static int cpu0_cpufreq_probe(struct platform_device *pdev) @@ -218,7 +168,7 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) goto out_put_node; } - ret = opp_init_cpufreq_table(cpu_dev, &freq_table); + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); if (ret) { pr_err("failed to init cpufreq table: %d\n", ret); goto out_put_node; @@ -230,7 +180,7 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) transition_latency = CPUFREQ_ETERNAL; if (!IS_ERR(cpu_reg)) { - struct opp *opp; + struct dev_pm_opp *opp; unsigned long min_uV, max_uV; int i; @@ -242,12 +192,12 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) ; rcu_read_lock(); - opp = opp_find_freq_exact(cpu_dev, + opp = dev_pm_opp_find_freq_exact(cpu_dev, freq_table[0].frequency * 1000, true); - min_uV = opp_get_voltage(opp); - opp = opp_find_freq_exact(cpu_dev, + min_uV = dev_pm_opp_get_voltage(opp); + opp = dev_pm_opp_find_freq_exact(cpu_dev, freq_table[i-1].frequency * 1000, true); - max_uV = opp_get_voltage(opp); + max_uV = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV); if (ret > 0) @@ -264,7 +214,7 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev) return 0; out_free_table: - opp_free_cpufreq_table(cpu_dev, &freq_table); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); out_put_node: of_node_put(np); return ret; @@ -273,7 +223,7 @@ out_put_node: static int cpu0_cpufreq_remove(struct platform_device *pdev) { cpufreq_unregister_driver(&cpu0_cpufreq_driver); - opp_free_cpufreq_table(cpu_dev, &freq_table); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); return 0; } diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c index b83d45f68574..a05b876f375e 100644 --- a/drivers/cpufreq/cpufreq-nforce2.c +++ b/drivers/cpufreq/cpufreq-nforce2.c @@ -303,9 +303,7 @@ static int nforce2_verify(struct cpufreq_policy *policy) if (policy->min < (fsb_pol_max * fid * 100)) policy->max = (fsb_pol_max + 1) * fid * 100; - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + cpufreq_verify_within_cpu_limits(policy); return 0; } @@ -362,7 +360,6 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) policy->min = policy->cpuinfo.min_freq = min_fsb * fid * 100; policy->max = policy->cpuinfo.max_freq = max_fsb * fid * 100; policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = nforce2_get(policy->cpu); return 0; } diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 04548f7023af..6c9cbb9ebd1f 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -47,49 +47,11 @@ static LIST_HEAD(cpufreq_policy_list); static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif -/* - * cpu_policy_rwsem is a per CPU reader-writer semaphore designed to cure - * all cpufreq/hotplug/workqueue/etc related lock issues. - * - * The rules for this semaphore: - * - Any routine that wants to read from the policy structure will - * do a down_read on this semaphore. - * - Any routine that will write to the policy structure and/or may take away - * the policy altogether (eg. CPU hotplug), will hold this lock in write - * mode before doing so. - * - * Additional rules: - * - Governor routines that can be called in cpufreq hotplug path should not - * take this sem as top level hotplug notifier handler takes this. - * - Lock should not be held across - * __cpufreq_governor(data, CPUFREQ_GOV_STOP); - */ -static DEFINE_PER_CPU(struct rw_semaphore, cpu_policy_rwsem); - -#define lock_policy_rwsem(mode, cpu) \ -static int lock_policy_rwsem_##mode(int cpu) \ -{ \ - struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); \ - BUG_ON(!policy); \ - down_##mode(&per_cpu(cpu_policy_rwsem, policy->cpu)); \ - \ - return 0; \ -} - -lock_policy_rwsem(read, cpu); -lock_policy_rwsem(write, cpu); - -#define unlock_policy_rwsem(mode, cpu) \ -static void unlock_policy_rwsem_##mode(int cpu) \ -{ \ - struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); \ - BUG_ON(!policy); \ - up_##mode(&per_cpu(cpu_policy_rwsem, policy->cpu)); \ +static inline bool has_target(void) +{ + return cpufreq_driver->target_index || cpufreq_driver->target; } -unlock_policy_rwsem(read, cpu); -unlock_policy_rwsem(write, cpu); - /* * rwsem to guarantee that cpufreq driver module doesn't unload during critical * sections @@ -135,7 +97,7 @@ static DEFINE_MUTEX(cpufreq_governor_mutex); bool have_governor_per_policy(void) { - return cpufreq_driver->have_governor_per_policy; + return !!(cpufreq_driver->flags & CPUFREQ_HAVE_GOVERNOR_PER_POLICY); } EXPORT_SYMBOL_GPL(have_governor_per_policy); @@ -183,6 +145,37 @@ u64 get_cpu_idle_time(unsigned int cpu, u64 *wall, int io_busy) } EXPORT_SYMBOL_GPL(get_cpu_idle_time); +/* + * This is a generic cpufreq init() routine which can be used by cpufreq + * drivers of SMP systems. It will do following: + * - validate & show freq table passed + * - set policies transition latency + * - policy->cpus with all possible CPUs + */ +int cpufreq_generic_init(struct cpufreq_policy *policy, + struct cpufreq_frequency_table *table, + unsigned int transition_latency) +{ + int ret; + + ret = cpufreq_table_validate_and_show(policy, table); + if (ret) { + pr_err("%s: invalid frequency table: %d\n", __func__, ret); + return ret; + } + + policy->cpuinfo.transition_latency = transition_latency; + + /* + * The driver only supports the SMP configuartion where all processors + * share the clock and voltage and clock. + */ + cpumask_setall(policy->cpus); + + return 0; +} +EXPORT_SYMBOL_GPL(cpufreq_generic_init); + struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu) { struct cpufreq_policy *policy = NULL; @@ -363,7 +356,7 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, *policy = CPUFREQ_POLICY_POWERSAVE; err = 0; } - } else if (cpufreq_driver->target) { + } else if (has_target()) { struct cpufreq_governor *t; mutex_lock(&cpufreq_governor_mutex); @@ -414,7 +407,7 @@ show_one(scaling_min_freq, min); show_one(scaling_max_freq, max); show_one(scaling_cur_freq, cur); -static int __cpufreq_set_policy(struct cpufreq_policy *policy, +static int cpufreq_set_policy(struct cpufreq_policy *policy, struct cpufreq_policy *new_policy); /** @@ -435,7 +428,7 @@ static ssize_t store_##file_name \ if (ret != 1) \ return -EINVAL; \ \ - ret = __cpufreq_set_policy(policy, &new_policy); \ + ret = cpufreq_set_policy(policy, &new_policy); \ policy->user_policy.object = policy->object; \ \ return ret ? ret : count; \ @@ -493,11 +486,7 @@ static ssize_t store_scaling_governor(struct cpufreq_policy *policy, &new_policy.governor)) return -EINVAL; - /* - * Do not use cpufreq_set_policy here or the user_policy.max - * will be wrongly overridden - */ - ret = __cpufreq_set_policy(policy, &new_policy); + ret = cpufreq_set_policy(policy, &new_policy); policy->user_policy.policy = policy->policy; policy->user_policy.governor = policy->governor; @@ -525,7 +514,7 @@ static ssize_t show_scaling_available_governors(struct cpufreq_policy *policy, ssize_t i = 0; struct cpufreq_governor *t; - if (!cpufreq_driver->target) { + if (!has_target()) { i += sprintf(buf, "performance powersave"); goto out; } @@ -653,24 +642,21 @@ static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) { struct cpufreq_policy *policy = to_policy(kobj); struct freq_attr *fattr = to_attr(attr); - ssize_t ret = -EINVAL; + ssize_t ret; if (!down_read_trylock(&cpufreq_rwsem)) - goto exit; + return -EINVAL; - if (lock_policy_rwsem_read(policy->cpu) < 0) - goto up_read; + down_read(&policy->rwsem); if (fattr->show) ret = fattr->show(policy, buf); else ret = -EIO; - unlock_policy_rwsem_read(policy->cpu); - -up_read: + up_read(&policy->rwsem); up_read(&cpufreq_rwsem); -exit: + return ret; } @@ -689,17 +675,15 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr, if (!down_read_trylock(&cpufreq_rwsem)) goto unlock; - if (lock_policy_rwsem_write(policy->cpu) < 0) - goto up_read; + down_write(&policy->rwsem); if (fattr->store) ret = fattr->store(policy, buf, count); else ret = -EIO; - unlock_policy_rwsem_write(policy->cpu); + up_write(&policy->rwsem); -up_read: up_read(&cpufreq_rwsem); unlock: put_online_cpus(); @@ -815,7 +799,7 @@ static int cpufreq_add_dev_interface(struct cpufreq_policy *policy, if (ret) goto err_out_kobj_put; } - if (cpufreq_driver->target) { + if (has_target()) { ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); if (ret) goto err_out_kobj_put; @@ -844,11 +828,11 @@ static void cpufreq_init_policy(struct cpufreq_policy *policy) int ret = 0; memcpy(&new_policy, policy, sizeof(*policy)); - /* assure that the starting sequence is run in __cpufreq_set_policy */ + /* assure that the starting sequence is run in cpufreq_set_policy */ policy->governor = NULL; /* set default policy */ - ret = __cpufreq_set_policy(policy, &new_policy); + ret = cpufreq_set_policy(policy, &new_policy); policy->user_policy.policy = policy->policy; policy->user_policy.governor = policy->governor; @@ -864,10 +848,10 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu, struct device *dev, bool frozen) { - int ret = 0, has_target = !!cpufreq_driver->target; + int ret = 0; unsigned long flags; - if (has_target) { + if (has_target()) { ret = __cpufreq_governor(policy, CPUFREQ_GOV_STOP); if (ret) { pr_err("%s: Failed to stop governor\n", __func__); @@ -875,7 +859,7 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, } } - lock_policy_rwsem_write(policy->cpu); + down_write(&policy->rwsem); write_lock_irqsave(&cpufreq_driver_lock, flags); @@ -883,9 +867,9 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, per_cpu(cpufreq_cpu_data, cpu) = policy; write_unlock_irqrestore(&cpufreq_driver_lock, flags); - unlock_policy_rwsem_write(policy->cpu); + up_write(&policy->rwsem); - if (has_target) { + if (has_target()) { if ((ret = __cpufreq_governor(policy, CPUFREQ_GOV_START)) || (ret = __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS))) { pr_err("%s: Failed to start governor\n", __func__); @@ -930,6 +914,8 @@ static struct cpufreq_policy *cpufreq_policy_alloc(void) goto err_free_cpumask; INIT_LIST_HEAD(&policy->policy_list); + init_rwsem(&policy->rwsem); + return policy; err_free_cpumask: @@ -949,26 +935,17 @@ static void cpufreq_policy_free(struct cpufreq_policy *policy) static void update_policy_cpu(struct cpufreq_policy *policy, unsigned int cpu) { - if (cpu == policy->cpu) + if (WARN_ON(cpu == policy->cpu)) return; - /* - * Take direct locks as lock_policy_rwsem_write wouldn't work here. - * Also lock for last cpu is enough here as contention will happen only - * after policy->cpu is changed and after it is changed, other threads - * will try to acquire lock for new cpu. And policy is already updated - * by then. - */ - down_write(&per_cpu(cpu_policy_rwsem, policy->cpu)); + down_write(&policy->rwsem); policy->last_cpu = policy->cpu; policy->cpu = cpu; - up_write(&per_cpu(cpu_policy_rwsem, policy->last_cpu)); + up_write(&policy->rwsem); -#ifdef CONFIG_CPU_FREQ_TABLE cpufreq_frequency_table_update_policy_cpu(policy); -#endif blocking_notifier_call_chain(&cpufreq_policy_notifier_list, CPUFREQ_UPDATE_POLICY_CPU, policy); } @@ -1053,6 +1030,14 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif, goto err_set_policy_cpu; } + if (cpufreq_driver->get) { + policy->cur = cpufreq_driver->get(policy->cpu); + if (!policy->cur) { + pr_err("%s: ->get() failed\n", __func__); + goto err_get_freq; + } + } + /* related cpus should atleast have policy->cpus */ cpumask_or(policy->related_cpus, policy->related_cpus, policy->cpus); @@ -1107,6 +1092,9 @@ err_out_unregister: per_cpu(cpufreq_cpu_data, j) = NULL; write_unlock_irqrestore(&cpufreq_driver_lock, flags); +err_get_freq: + if (cpufreq_driver->exit) + cpufreq_driver->exit(policy); err_set_policy_cpu: cpufreq_policy_free(policy); nomem_out: @@ -1147,9 +1135,9 @@ static int cpufreq_nominate_new_policy_cpu(struct cpufreq_policy *policy, if (ret) { pr_err("%s: Failed to move kobj: %d", __func__, ret); - WARN_ON(lock_policy_rwsem_write(old_cpu)); + down_write(&policy->rwsem); cpumask_set_cpu(old_cpu, policy->cpus); - unlock_policy_rwsem_write(old_cpu); + up_write(&policy->rwsem); ret = sysfs_create_link(&cpu_dev->kobj, &policy->kobj, "cpufreq"); @@ -1186,7 +1174,7 @@ static int __cpufreq_remove_dev_prepare(struct device *dev, return -EINVAL; } - if (cpufreq_driver->target) { + if (has_target()) { ret = __cpufreq_governor(policy, CPUFREQ_GOV_STOP); if (ret) { pr_err("%s: Failed to stop governor\n", __func__); @@ -1200,22 +1188,21 @@ static int __cpufreq_remove_dev_prepare(struct device *dev, policy->governor->name, CPUFREQ_NAME_LEN); #endif - lock_policy_rwsem_read(cpu); + down_read(&policy->rwsem); cpus = cpumask_weight(policy->cpus); - unlock_policy_rwsem_read(cpu); + up_read(&policy->rwsem); if (cpu != policy->cpu) { if (!frozen) sysfs_remove_link(&dev->kobj, "cpufreq"); } else if (cpus > 1) { - new_cpu = cpufreq_nominate_new_policy_cpu(policy, cpu, frozen); if (new_cpu >= 0) { update_policy_cpu(policy, new_cpu); if (!frozen) { - pr_debug("%s: policy Kobject moved to cpu: %d " - "from: %d\n",__func__, new_cpu, cpu); + pr_debug("%s: policy Kobject moved to cpu: %d from: %d\n", + __func__, new_cpu, cpu); } } } @@ -1243,16 +1230,16 @@ static int __cpufreq_remove_dev_finish(struct device *dev, return -EINVAL; } - WARN_ON(lock_policy_rwsem_write(cpu)); + down_write(&policy->rwsem); cpus = cpumask_weight(policy->cpus); if (cpus > 1) cpumask_clear_cpu(cpu, policy->cpus); - unlock_policy_rwsem_write(cpu); + up_write(&policy->rwsem); /* If cpu is last user of policy, free policy */ if (cpus == 1) { - if (cpufreq_driver->target) { + if (has_target()) { ret = __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT); if (ret) { @@ -1263,10 +1250,10 @@ static int __cpufreq_remove_dev_finish(struct device *dev, } if (!frozen) { - lock_policy_rwsem_read(cpu); + down_read(&policy->rwsem); kobj = &policy->kobj; cmp = &policy->kobj_unregister; - unlock_policy_rwsem_read(cpu); + up_read(&policy->rwsem); kobject_put(kobj); /* @@ -1295,7 +1282,7 @@ static int __cpufreq_remove_dev_finish(struct device *dev, if (!frozen) cpufreq_policy_free(policy); } else { - if (cpufreq_driver->target) { + if (has_target()) { if ((ret = __cpufreq_governor(policy, CPUFREQ_GOV_START)) || (ret = __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS))) { pr_err("%s: Failed to start governor\n", @@ -1310,36 +1297,24 @@ static int __cpufreq_remove_dev_finish(struct device *dev, } /** - * __cpufreq_remove_dev - remove a CPU device + * cpufreq_remove_dev - remove a CPU device * * Removes the cpufreq interface for a CPU device. - * Caller should already have policy_rwsem in write mode for this CPU. - * This routine frees the rwsem before returning. */ -static inline int __cpufreq_remove_dev(struct device *dev, - struct subsys_interface *sif, - bool frozen) -{ - int ret; - - ret = __cpufreq_remove_dev_prepare(dev, sif, frozen); - - if (!ret) - ret = __cpufreq_remove_dev_finish(dev, sif, frozen); - - return ret; -} - static int cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif) { unsigned int cpu = dev->id; - int retval; + int ret; if (cpu_is_offline(cpu)) return 0; - retval = __cpufreq_remove_dev(dev, sif, false); - return retval; + ret = __cpufreq_remove_dev_prepare(dev, sif, false); + + if (!ret) + ret = __cpufreq_remove_dev_finish(dev, sif, false); + + return ret; } static void handle_update(struct work_struct *work) @@ -1458,22 +1433,22 @@ static unsigned int __cpufreq_get(unsigned int cpu) */ unsigned int cpufreq_get(unsigned int cpu) { + struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu); unsigned int ret_freq = 0; if (cpufreq_disabled() || !cpufreq_driver) return -ENOENT; + BUG_ON(!policy); + if (!down_read_trylock(&cpufreq_rwsem)) return 0; - if (unlikely(lock_policy_rwsem_read(cpu))) - goto out_policy; + down_read(&policy->rwsem); ret_freq = __cpufreq_get(cpu); - unlock_policy_rwsem_read(cpu); - -out_policy: + up_read(&policy->rwsem); up_read(&cpufreq_rwsem); return ret_freq; @@ -1681,12 +1656,41 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy, pr_debug("target for CPU %u: %u kHz, relation %u, requested %u kHz\n", policy->cpu, target_freq, relation, old_target_freq); + /* + * This might look like a redundant call as we are checking it again + * after finding index. But it is left intentionally for cases where + * exactly same freq is called again and so we can save on few function + * calls. + */ if (target_freq == policy->cur) return 0; if (cpufreq_driver->target) retval = cpufreq_driver->target(policy, target_freq, relation); + else if (cpufreq_driver->target_index) { + struct cpufreq_frequency_table *freq_table; + int index; + + freq_table = cpufreq_frequency_get_table(policy->cpu); + if (unlikely(!freq_table)) { + pr_err("%s: Unable to find freq_table\n", __func__); + goto out; + } + + retval = cpufreq_frequency_table_target(policy, freq_table, + target_freq, relation, &index); + if (unlikely(retval)) { + pr_err("%s: Unable to find matching freq\n", __func__); + goto out; + } + if (freq_table[index].frequency == policy->cur) + retval = 0; + else + retval = cpufreq_driver->target_index(policy, index); + } + +out: return retval; } EXPORT_SYMBOL_GPL(__cpufreq_driver_target); @@ -1697,14 +1701,12 @@ int cpufreq_driver_target(struct cpufreq_policy *policy, { int ret = -EINVAL; - if (unlikely(lock_policy_rwsem_write(policy->cpu))) - goto fail; + down_write(&policy->rwsem); ret = __cpufreq_driver_target(policy, target_freq, relation); - unlock_policy_rwsem_write(policy->cpu); + up_write(&policy->rwsem); -fail: return ret; } EXPORT_SYMBOL_GPL(cpufreq_driver_target); @@ -1871,10 +1873,10 @@ int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu) EXPORT_SYMBOL(cpufreq_get_policy); /* - * data : current policy. - * policy : policy to be set. + * policy : current policy. + * new_policy: policy to be set. */ -static int __cpufreq_set_policy(struct cpufreq_policy *policy, +static int cpufreq_set_policy(struct cpufreq_policy *policy, struct cpufreq_policy *new_policy) { int ret = 0, failed = 1; @@ -1934,10 +1936,10 @@ static int __cpufreq_set_policy(struct cpufreq_policy *policy, /* end old governor */ if (policy->governor) { __cpufreq_governor(policy, CPUFREQ_GOV_STOP); - unlock_policy_rwsem_write(new_policy->cpu); + up_write(&policy->rwsem); __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT); - lock_policy_rwsem_write(new_policy->cpu); + down_write(&policy->rwsem); } /* start new governor */ @@ -1946,10 +1948,10 @@ static int __cpufreq_set_policy(struct cpufreq_policy *policy, if (!__cpufreq_governor(policy, CPUFREQ_GOV_START)) { failed = 0; } else { - unlock_policy_rwsem_write(new_policy->cpu); + up_write(&policy->rwsem); __cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT); - lock_policy_rwsem_write(new_policy->cpu); + down_write(&policy->rwsem); } } @@ -1995,10 +1997,7 @@ int cpufreq_update_policy(unsigned int cpu) goto no_policy; } - if (unlikely(lock_policy_rwsem_write(cpu))) { - ret = -EINVAL; - goto fail; - } + down_write(&policy->rwsem); pr_debug("updating policy for CPU %u\n", cpu); memcpy(&new_policy, policy, sizeof(*policy)); @@ -2017,17 +2016,16 @@ int cpufreq_update_policy(unsigned int cpu) pr_debug("Driver did not initialize current freq"); policy->cur = new_policy.cur; } else { - if (policy->cur != new_policy.cur && cpufreq_driver->target) + if (policy->cur != new_policy.cur && has_target()) cpufreq_out_of_sync(cpu, policy->cur, new_policy.cur); } } - ret = __cpufreq_set_policy(policy, &new_policy); + ret = cpufreq_set_policy(policy, &new_policy); - unlock_policy_rwsem_write(cpu); + up_write(&policy->rwsem); -fail: cpufreq_cpu_put(policy); no_policy: return ret; @@ -2096,7 +2094,8 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data) return -ENODEV; if (!driver_data || !driver_data->verify || !driver_data->init || - ((!driver_data->setpolicy) && (!driver_data->target))) + !(driver_data->setpolicy || driver_data->target_index || + driver_data->target)) return -EINVAL; pr_debug("trying to register driver %s\n", driver_data->name); @@ -2183,14 +2182,9 @@ EXPORT_SYMBOL_GPL(cpufreq_unregister_driver); static int __init cpufreq_core_init(void) { - int cpu; - if (cpufreq_disabled()) return -ENODEV; - for_each_possible_cpu(cpu) - init_rwsem(&per_cpu(cpu_policy_rwsem, cpu)); - cpufreq_global_kobject = kobject_create(); BUG_ON(!cpufreq_global_kobject); register_syscore_ops(&cpufreq_syscore_ops); diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h index 88cd39f7b0e9..b5f2b8618949 100644 --- a/drivers/cpufreq/cpufreq_governor.h +++ b/drivers/cpufreq/cpufreq_governor.h @@ -191,7 +191,10 @@ struct common_dbs_data { struct attribute_group *attr_group_gov_sys; /* one governor - system */ struct attribute_group *attr_group_gov_pol; /* one governor - policy */ - /* Common data for platforms that don't set have_governor_per_policy */ + /* + * Common data for platforms that don't set + * CPUFREQ_HAVE_GOVERNOR_PER_POLICY + */ struct dbs_data *gdbs_data; struct cpu_dbs_common_info *(*get_cpu_cdbs)(int cpu); diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c index 03078090b5f7..4dbf1db16aca 100644 --- a/drivers/cpufreq/cpufreq_userspace.c +++ b/drivers/cpufreq/cpufreq_userspace.c @@ -38,18 +38,7 @@ static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq) if (!per_cpu(cpu_is_managed, policy->cpu)) goto err; - /* - * We're safe from concurrent calls to ->target() here - * as we hold the userspace_mutex lock. If we were calling - * cpufreq_driver_target, a deadlock situation might occur: - * A: cpufreq_set (lock userspace_mutex) -> - * cpufreq_driver_target(lock policy->lock) - * B: cpufreq_set_policy(lock policy->lock) -> - * __cpufreq_governor -> - * cpufreq_governor_userspace (lock userspace_mutex) - */ ret = __cpufreq_driver_target(policy, freq, CPUFREQ_RELATION_L); - err: mutex_unlock(&userspace_mutex); return ret; diff --git a/drivers/cpufreq/cris-artpec3-cpufreq.c b/drivers/cpufreq/cris-artpec3-cpufreq.c index cb8276dd19ca..841857cf1562 100644 --- a/drivers/cpufreq/cris-artpec3-cpufreq.c +++ b/drivers/cpufreq/cris-artpec3-cpufreq.c @@ -27,8 +27,7 @@ static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu) return clk_ctrl.pll ? 200000 : 6000; } -static void cris_freq_set_cpu_state(struct cpufreq_policy *policy, - unsigned int state) +static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state) { struct cpufreq_freqs freqs; reg_clkgen_rw_clk_ctrl clk_ctrl; @@ -52,66 +51,23 @@ static void cris_freq_set_cpu_state(struct cpufreq_policy *policy, local_irq_enable(); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); -}; - -static int cris_freq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &cris_freq_table[0]); -} - -static int cris_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, cris_freq_table, - target_freq, relation, &newstate)) - return -EINVAL; - - cris_freq_set_cpu_state(policy, newstate); return 0; } static int cris_freq_cpu_init(struct cpufreq_policy *policy) { - int result; - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 1000000; /* 1ms */ - policy->cur = cris_freq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, cris_freq_table); - if (result) - return (result); - - cpufreq_frequency_table_get_attr(cris_freq_table, policy->cpu); - - return 0; -} - - -static int cris_freq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; + return cpufreq_generic_init(policy, cris_freq_table, 1000000); } - -static struct freq_attr *cris_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver cris_freq_driver = { .get = cris_freq_get_cpu_frequency, - .verify = cris_freq_verify, - .target = cris_freq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = cris_freq_target, .init = cris_freq_cpu_init, - .exit = cris_freq_cpu_exit, + .exit = cpufreq_generic_exit, .name = "cris_freq", - .attr = cris_freq_attr, + .attr = cpufreq_generic_attr, }; static int __init cris_freq_init(void) diff --git a/drivers/cpufreq/cris-etraxfs-cpufreq.c b/drivers/cpufreq/cris-etraxfs-cpufreq.c index 72328f77dc53..c58811abd961 100644 --- a/drivers/cpufreq/cris-etraxfs-cpufreq.c +++ b/drivers/cpufreq/cris-etraxfs-cpufreq.c @@ -27,8 +27,7 @@ static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu) return clk_ctrl.pll ? 200000 : 6000; } -static void cris_freq_set_cpu_state(struct cpufreq_policy *policy, - unsigned int state) +static int cris_freq_target(struct cpufreq_policy *policy, unsigned int state) { struct cpufreq_freqs freqs; reg_config_rw_clk_ctrl clk_ctrl; @@ -52,63 +51,23 @@ static void cris_freq_set_cpu_state(struct cpufreq_policy *policy, local_irq_enable(); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); -}; - -static int cris_freq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &cris_freq_table[0]); -} - -static int cris_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target - (policy, cris_freq_table, target_freq, relation, &newstate)) - return -EINVAL; - - cris_freq_set_cpu_state(policy, newstate); return 0; } static int cris_freq_cpu_init(struct cpufreq_policy *policy) { - int result; - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 1000000; /* 1ms */ - policy->cur = cris_freq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, cris_freq_table); - if (result) - return (result); - - cpufreq_frequency_table_get_attr(cris_freq_table, policy->cpu); - - return 0; + return cpufreq_generic_init(policy, cris_freq_table, 1000000); } -static int cris_freq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *cris_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver cris_freq_driver = { .get = cris_freq_get_cpu_frequency, - .verify = cris_freq_verify, - .target = cris_freq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = cris_freq_target, .init = cris_freq_cpu_init, - .exit = cris_freq_cpu_exit, + .exit = cpufreq_generic_exit, .name = "cris_freq", - .attr = cris_freq_attr, + .attr = cpufreq_generic_attr, }; static int __init cris_freq_init(void) diff --git a/drivers/cpufreq/davinci-cpufreq.c b/drivers/cpufreq/davinci-cpufreq.c index 551dd655c6f2..1f5d8a569c77 100644 --- a/drivers/cpufreq/davinci-cpufreq.c +++ b/drivers/cpufreq/davinci-cpufreq.c @@ -50,9 +50,7 @@ static int davinci_verify_speed(struct cpufreq_policy *policy) if (policy->cpu) return -EINVAL; - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - + cpufreq_verify_within_cpu_limits(policy); policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000; policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000; cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, @@ -68,28 +66,18 @@ static unsigned int davinci_getspeed(unsigned int cpu) return clk_get_rate(cpufreq.armclk) / 1000; } -static int davinci_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) +static int davinci_target(struct cpufreq_policy *policy, unsigned int idx) { int ret = 0; - unsigned int idx; struct cpufreq_freqs freqs; struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; struct clk *armclk = cpufreq.armclk; freqs.old = davinci_getspeed(0); - freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000; - - if (freqs.old == freqs.new) - return ret; + freqs.new = pdata->freq_table[idx].frequency; dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); - ret = cpufreq_frequency_table_target(policy, pdata->freq_table, - freqs.new, relation, &idx); - if (ret) - return -EINVAL; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* if moving to higher frequency, up the voltage beforehand */ @@ -138,47 +126,24 @@ static int davinci_cpu_init(struct cpufreq_policy *policy) return result; } - policy->cur = davinci_getspeed(0); - - result = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (result) { - pr_err("%s: cpufreq_frequency_table_cpuinfo() failed", - __func__); - return result; - } - - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - /* * Time measurement across the target() function yields ~1500-1800us * time taken with no drivers on notification list. * Setting the latency to 2000 us to accommodate addition of drivers * to pre/post change notification list. */ - policy->cpuinfo.transition_latency = 2000 * 1000; - return 0; -} - -static int davinci_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; + return cpufreq_generic_init(policy, freq_table, 2000 * 1000); } -static struct freq_attr *davinci_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver davinci_driver = { .flags = CPUFREQ_STICKY, .verify = davinci_verify_speed, - .target = davinci_target, + .target_index = davinci_target, .get = davinci_getspeed, .init = davinci_cpu_init, - .exit = davinci_cpu_exit, + .exit = cpufreq_generic_exit, .name = "davinci", - .attr = davinci_cpufreq_attr, + .attr = cpufreq_generic_attr, }; static int __init davinci_cpufreq_probe(struct platform_device *pdev) diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c index 26321cdc1946..238b16976be1 100644 --- a/drivers/cpufreq/dbx500-cpufreq.c +++ b/drivers/cpufreq/dbx500-cpufreq.c @@ -19,34 +19,14 @@ static struct cpufreq_frequency_table *freq_table; static struct clk *armss_clk; -static struct freq_attr *dbx500_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static int dbx500_cpufreq_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, freq_table); -} - static int dbx500_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int index) { struct cpufreq_freqs freqs; - unsigned int idx; int ret; - /* Lookup the next frequency */ - if (cpufreq_frequency_table_target(policy, freq_table, target_freq, - relation, &idx)) - return -EINVAL; - freqs.old = policy->cur; - freqs.new = freq_table[idx].frequency; - - if (freqs.old == freqs.new) - return 0; + freqs.new = freq_table[index].frequency; /* pre-change notification */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); @@ -84,43 +64,17 @@ static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu) static int dbx500_cpufreq_init(struct cpufreq_policy *policy) { - int res; - - /* get policy fields based on the table */ - res = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (!res) - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - else { - pr_err("dbx500-cpufreq: Failed to read policy table\n"); - return res; - } - - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - policy->cur = dbx500_cpufreq_getspeed(policy->cpu); - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - /* - * FIXME : Need to take time measurement across the target() - * function with no/some/all drivers in the notification - * list. - */ - policy->cpuinfo.transition_latency = 20 * 1000; /* in ns */ - - /* policy sharing between dual CPUs */ - cpumask_setall(policy->cpus); - - return 0; + return cpufreq_generic_init(policy, freq_table, 20 * 1000); } static struct cpufreq_driver dbx500_cpufreq_driver = { .flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS, - .verify = dbx500_cpufreq_verify_speed, - .target = dbx500_cpufreq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = dbx500_cpufreq_target, .get = dbx500_cpufreq_getspeed, .init = dbx500_cpufreq_init, .name = "DBX500", - .attr = dbx500_cpufreq_attr, + .attr = cpufreq_generic_attr, }; static int dbx500_cpufreq_probe(struct platform_device *pdev) diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c index 09f64cc83019..b39c4ef60a7a 100644 --- a/drivers/cpufreq/e_powersaver.c +++ b/drivers/cpufreq/e_powersaver.c @@ -168,12 +168,9 @@ postchange: return err; } -static int eps_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int eps_target(struct cpufreq_policy *policy, unsigned int index) { struct eps_cpu_data *centaur; - unsigned int newstate = 0; unsigned int cpu = policy->cpu; unsigned int dest_state; int ret; @@ -182,28 +179,14 @@ static int eps_target(struct cpufreq_policy *policy, return -ENODEV; centaur = eps_cpu[cpu]; - if (unlikely(cpufreq_frequency_table_target(policy, - &eps_cpu[cpu]->freq_table[0], - target_freq, - relation, - &newstate))) { - return -EINVAL; - } - /* Make frequency transition */ - dest_state = centaur->freq_table[newstate].driver_data & 0xffff; + dest_state = centaur->freq_table[index].driver_data & 0xffff; ret = eps_set_state(centaur, policy, dest_state); if (ret) printk(KERN_ERR "eps: Timeout!\n"); return ret; } -static int eps_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - &eps_cpu[policy->cpu]->freq_table[0]); -} - static int eps_cpu_init(struct cpufreq_policy *policy) { unsigned int i; @@ -401,15 +384,13 @@ static int eps_cpu_init(struct cpufreq_policy *policy) } policy->cpuinfo.transition_latency = 140000; /* 844mV -> 700mV in ns */ - policy->cur = fsb * current_multiplier; - ret = cpufreq_frequency_table_cpuinfo(policy, ¢aur->freq_table[0]); + ret = cpufreq_table_validate_and_show(policy, ¢aur->freq_table[0]); if (ret) { kfree(centaur); return ret; } - cpufreq_frequency_table_get_attr(¢aur->freq_table[0], policy->cpu); return 0; } @@ -424,19 +405,14 @@ static int eps_cpu_exit(struct cpufreq_policy *policy) return 0; } -static struct freq_attr *eps_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver eps_driver = { - .verify = eps_verify, - .target = eps_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = eps_target, .init = eps_cpu_init, .exit = eps_cpu_exit, .get = eps_get, .name = "e_powersaver", - .attr = eps_attr, + .attr = cpufreq_generic_attr, }; diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c index 823a400d98fd..4ab41539514f 100644 --- a/drivers/cpufreq/elanfreq.c +++ b/drivers/cpufreq/elanfreq.c @@ -105,20 +105,8 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) } -/** - * elanfreq_set_cpu_frequency: Change the CPU core frequency - * @cpu: cpu number - * @freq: frequency in kHz - * - * This function takes a frequency value and changes the CPU frequency - * according to this. Note that the frequency has to be checked by - * elanfreq_validatespeed() for correctness! - * - * There is no return value. - */ - -static void elanfreq_set_cpu_state(struct cpufreq_policy *policy, - unsigned int state) +static int elanfreq_target(struct cpufreq_policy *policy, + unsigned int state) { struct cpufreq_freqs freqs; @@ -162,38 +150,9 @@ static void elanfreq_set_cpu_state(struct cpufreq_policy *policy, local_irq_enable(); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); -}; - - -/** - * elanfreq_validatespeed: test if frequency range is valid - * @policy: the policy to validate - * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. - */ - -static int elanfreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]); -} - -static int elanfreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], - target_freq, relation, &newstate)) - return -EINVAL; - - elanfreq_set_cpu_state(policy, newstate); return 0; } - - /* * Module init and exit code */ @@ -202,7 +161,6 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *c = &cpu_data(0); unsigned int i; - int result; /* capability check */ if ((c->x86_vendor != X86_VENDOR_AMD) || @@ -221,21 +179,8 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) /* cpuinfo and default policy values */ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = elanfreq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table); - if (result) - return result; - - cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); - return 0; -} - -static int elanfreq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; + return cpufreq_table_validate_and_show(policy, elanfreq_table); } @@ -261,20 +206,14 @@ __setup("elanfreq=", elanfreq_setup); #endif -static struct freq_attr *elanfreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - static struct cpufreq_driver elanfreq_driver = { .get = elanfreq_get_cpu_frequency, - .verify = elanfreq_verify, - .target = elanfreq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = elanfreq_target, .init = elanfreq_cpu_init, - .exit = elanfreq_cpu_exit, + .exit = cpufreq_generic_exit, .name = "elanfreq", - .attr = elanfreq_attr, + .attr = cpufreq_generic_attr, }; static const struct x86_cpu_id elan_id[] = { diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index 0fac34439e31..9982fcb82257 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -31,12 +31,6 @@ static unsigned int locking_frequency; static bool frequency_locked; static DEFINE_MUTEX(cpufreq_lock); -static int exynos_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - exynos_info->freq_table); -} - static unsigned int exynos_getspeed(unsigned int cpu) { return clk_get_rate(exynos_info->cpu_clk) / 1000; @@ -71,9 +65,6 @@ static int exynos_cpufreq_scale(unsigned int target_freq) freqs.old = policy->cur; freqs.new = target_freq; - if (freqs.new == freqs.old) - goto out; - /* * The policy max have been changed so that we cannot get proper * old_index with cpufreq_frequency_table_target(). Thus, ignore @@ -141,7 +132,7 @@ post_notify: if ((freqs.new < freqs.old) || ((freqs.new > freqs.old) && safe_arm_volt)) { /* down the voltage after frequency change */ - regulator_set_voltage(arm_regulator, arm_volt, + ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt); if (ret) { pr_err("%s: failed to set cpu voltage to %d\n", @@ -157,13 +148,9 @@ out: return ret; } -static int exynos_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int exynos_target(struct cpufreq_policy *policy, unsigned int index) { struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; - unsigned int index; - unsigned int new_freq; int ret = 0; mutex_lock(&cpufreq_lock); @@ -171,15 +158,7 @@ static int exynos_target(struct cpufreq_policy *policy, if (frequency_locked) goto out; - if (cpufreq_frequency_table_target(policy, freq_table, - target_freq, relation, &index)) { - ret = -EINVAL; - goto out; - } - - new_freq = freq_table[index].frequency; - - ret = exynos_cpufreq_scale(new_freq); + ret = exynos_cpufreq_scale(freq_table[index].frequency); out: mutex_unlock(&cpufreq_lock); @@ -247,38 +226,18 @@ static struct notifier_block exynos_cpufreq_nb = { static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy) { - policy->cur = policy->min = policy->max = exynos_getspeed(policy->cpu); - - cpufreq_frequency_table_get_attr(exynos_info->freq_table, policy->cpu); - - /* set the transition latency value */ - policy->cpuinfo.transition_latency = 100000; - - cpumask_setall(policy->cpus); - - return cpufreq_frequency_table_cpuinfo(policy, exynos_info->freq_table); + return cpufreq_generic_init(policy, exynos_info->freq_table, 100000); } -static int exynos_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *exynos_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver exynos_driver = { .flags = CPUFREQ_STICKY, - .verify = exynos_verify_speed, - .target = exynos_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = exynos_target, .get = exynos_getspeed, .init = exynos_cpufreq_cpu_init, - .exit = exynos_cpufreq_cpu_exit, + .exit = cpufreq_generic_exit, .name = "exynos_cpufreq", - .attr = exynos_cpufreq_attr, + .attr = cpufreq_generic_attr, #ifdef CONFIG_PM .suspend = exynos_cpufreq_suspend, .resume = exynos_cpufreq_resume, diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c index add7fbec4fc9..f2c75065ce19 100644 --- a/drivers/cpufreq/exynos4210-cpufreq.c +++ b/drivers/cpufreq/exynos4210-cpufreq.c @@ -81,9 +81,9 @@ static void exynos4210_set_clkdiv(unsigned int div_index) static void exynos4210_set_apll(unsigned int index) { - unsigned int tmp; + unsigned int tmp, freq = apll_freq_4210[index].freq; - /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ + /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ clk_set_parent(moutcore, mout_mpll); do { @@ -92,21 +92,9 @@ static void exynos4210_set_apll(unsigned int index) tmp &= 0x7; } while (tmp != 0x2); - /* 2. Set APLL Lock time */ - __raw_writel(EXYNOS4_APLL_LOCKTIME, EXYNOS4_APLL_LOCK); - - /* 3. Change PLL PMS values */ - tmp = __raw_readl(EXYNOS4_APLL_CON0); - tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0)); - tmp |= apll_freq_4210[index].mps; - __raw_writel(tmp, EXYNOS4_APLL_CON0); + clk_set_rate(mout_apll, freq * 1000); - /* 4. wait_lock_time */ - do { - tmp = __raw_readl(EXYNOS4_APLL_CON0); - } while (!(tmp & (0x1 << EXYNOS4_APLLCON0_LOCKED_SHIFT))); - - /* 5. MUX_CORE_SEL = APLL */ + /* MUX_CORE_SEL = APLL */ clk_set_parent(moutcore, mout_apll); do { @@ -115,53 +103,15 @@ static void exynos4210_set_apll(unsigned int index) } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)); } -static bool exynos4210_pms_change(unsigned int old_index, unsigned int new_index) -{ - unsigned int old_pm = apll_freq_4210[old_index].mps >> 8; - unsigned int new_pm = apll_freq_4210[new_index].mps >> 8; - - return (old_pm == new_pm) ? 0 : 1; -} - static void exynos4210_set_frequency(unsigned int old_index, unsigned int new_index) { - unsigned int tmp; - if (old_index > new_index) { - if (!exynos4210_pms_change(old_index, new_index)) { - /* 1. Change the system clock divider values */ - exynos4210_set_clkdiv(new_index); - - /* 2. Change just s value in apll m,p,s value */ - tmp = __raw_readl(EXYNOS4_APLL_CON0); - tmp &= ~(0x7 << 0); - tmp |= apll_freq_4210[new_index].mps & 0x7; - __raw_writel(tmp, EXYNOS4_APLL_CON0); - } else { - /* Clock Configuration Procedure */ - /* 1. Change the system clock divider values */ - exynos4210_set_clkdiv(new_index); - /* 2. Change the apll m,p,s value */ - exynos4210_set_apll(new_index); - } + exynos4210_set_clkdiv(new_index); + exynos4210_set_apll(new_index); } else if (old_index < new_index) { - if (!exynos4210_pms_change(old_index, new_index)) { - /* 1. Change just s value in apll m,p,s value */ - tmp = __raw_readl(EXYNOS4_APLL_CON0); - tmp &= ~(0x7 << 0); - tmp |= apll_freq_4210[new_index].mps & 0x7; - __raw_writel(tmp, EXYNOS4_APLL_CON0); - - /* 2. Change the system clock divider values */ - exynos4210_set_clkdiv(new_index); - } else { - /* Clock Configuration Procedure */ - /* 1. Change the apll m,p,s value */ - exynos4210_set_apll(new_index); - /* 2. Change the system clock divider values */ - exynos4210_set_clkdiv(new_index); - } + exynos4210_set_apll(new_index); + exynos4210_set_clkdiv(new_index); } } @@ -194,7 +144,6 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info) info->volt_table = exynos4210_volt_table; info->freq_table = exynos4210_freq_table; info->set_freq = exynos4210_set_frequency; - info->need_apll_change = exynos4210_pms_change; return 0; diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c index 08b7477b0aa2..8683304ce62c 100644 --- a/drivers/cpufreq/exynos4x12-cpufreq.c +++ b/drivers/cpufreq/exynos4x12-cpufreq.c @@ -128,9 +128,9 @@ static void exynos4x12_set_clkdiv(unsigned int div_index) static void exynos4x12_set_apll(unsigned int index) { - unsigned int tmp, pdiv; + unsigned int tmp, freq = apll_freq_4x12[index].freq; - /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ + /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ clk_set_parent(moutcore, mout_mpll); do { @@ -140,24 +140,9 @@ static void exynos4x12_set_apll(unsigned int index) tmp &= 0x7; } while (tmp != 0x2); - /* 2. Set APLL Lock time */ - pdiv = ((apll_freq_4x12[index].mps >> 8) & 0x3f); + clk_set_rate(mout_apll, freq * 1000); - __raw_writel((pdiv * 250), EXYNOS4_APLL_LOCK); - - /* 3. Change PLL PMS values */ - tmp = __raw_readl(EXYNOS4_APLL_CON0); - tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0)); - tmp |= apll_freq_4x12[index].mps; - __raw_writel(tmp, EXYNOS4_APLL_CON0); - - /* 4. wait_lock_time */ - do { - cpu_relax(); - tmp = __raw_readl(EXYNOS4_APLL_CON0); - } while (!(tmp & (0x1 << EXYNOS4_APLLCON0_LOCKED_SHIFT))); - - /* 5. MUX_CORE_SEL = APLL */ + /* MUX_CORE_SEL = APLL */ clk_set_parent(moutcore, mout_apll); do { @@ -167,52 +152,15 @@ static void exynos4x12_set_apll(unsigned int index) } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)); } -static bool exynos4x12_pms_change(unsigned int old_index, unsigned int new_index) -{ - unsigned int old_pm = apll_freq_4x12[old_index].mps >> 8; - unsigned int new_pm = apll_freq_4x12[new_index].mps >> 8; - - return (old_pm == new_pm) ? 0 : 1; -} - static void exynos4x12_set_frequency(unsigned int old_index, unsigned int new_index) { - unsigned int tmp; - if (old_index > new_index) { - if (!exynos4x12_pms_change(old_index, new_index)) { - /* 1. Change the system clock divider values */ - exynos4x12_set_clkdiv(new_index); - /* 2. Change just s value in apll m,p,s value */ - tmp = __raw_readl(EXYNOS4_APLL_CON0); - tmp &= ~(0x7 << 0); - tmp |= apll_freq_4x12[new_index].mps & 0x7; - __raw_writel(tmp, EXYNOS4_APLL_CON0); - - } else { - /* Clock Configuration Procedure */ - /* 1. Change the system clock divider values */ - exynos4x12_set_clkdiv(new_index); - /* 2. Change the apll m,p,s value */ - exynos4x12_set_apll(new_index); - } + exynos4x12_set_clkdiv(new_index); + exynos4x12_set_apll(new_index); } else if (old_index < new_index) { - if (!exynos4x12_pms_change(old_index, new_index)) { - /* 1. Change just s value in apll m,p,s value */ - tmp = __raw_readl(EXYNOS4_APLL_CON0); - tmp &= ~(0x7 << 0); - tmp |= apll_freq_4x12[new_index].mps & 0x7; - __raw_writel(tmp, EXYNOS4_APLL_CON0); - /* 2. Change the system clock divider values */ - exynos4x12_set_clkdiv(new_index); - } else { - /* Clock Configuration Procedure */ - /* 1. Change the apll m,p,s value */ - exynos4x12_set_apll(new_index); - /* 2. Change the system clock divider values */ - exynos4x12_set_clkdiv(new_index); - } + exynos4x12_set_apll(new_index); + exynos4x12_set_clkdiv(new_index); } } @@ -250,7 +198,6 @@ int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) info->volt_table = exynos4x12_volt_table; info->freq_table = exynos4x12_freq_table; info->set_freq = exynos4x12_set_frequency; - info->need_apll_change = exynos4x12_pms_change; return 0; diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c index be5380ecdcd4..1bf9b060d522 100644 --- a/drivers/cpufreq/exynos5440-cpufreq.c +++ b/drivers/cpufreq/exynos5440-cpufreq.c @@ -20,7 +20,7 @@ #include <linux/module.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/platform_device.h> #include <linux/slab.h> @@ -118,12 +118,12 @@ static int init_div_table(void) struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table; unsigned int tmp, clk_div, ema_div, freq, volt_id; int i = 0; - struct opp *opp; + struct dev_pm_opp *opp; rcu_read_lock(); for (i = 0; freq_tbl[i].frequency != CPUFREQ_TABLE_END; i++) { - opp = opp_find_freq_exact(dvfs_info->dev, + opp = dev_pm_opp_find_freq_exact(dvfs_info->dev, freq_tbl[i].frequency * 1000, true); if (IS_ERR(opp)) { rcu_read_unlock(); @@ -142,7 +142,7 @@ static int init_div_table(void) << P0_7_CSCLKDEV_SHIFT; /* Calculate EMA */ - volt_id = opp_get_voltage(opp); + volt_id = dev_pm_opp_get_voltage(opp); volt_id = (MAX_VOLTAGE - volt_id) / VOLTAGE_STEP; if (volt_id < PMIC_HIGH_VOLT) { ema_div = (CPUEMA_HIGH << P0_7_CPUEMA_SHIFT) | @@ -209,38 +209,22 @@ static void exynos_enable_dvfs(void) dvfs_info->base + XMU_DVFS_CTRL); } -static int exynos_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - dvfs_info->freq_table); -} - static unsigned int exynos_getspeed(unsigned int cpu) { return dvfs_info->cur_frequency; } -static int exynos_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int exynos_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int index, tmp; - int ret = 0, i; + unsigned int tmp; + int i; struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table; mutex_lock(&cpufreq_lock); - ret = cpufreq_frequency_table_target(policy, freq_table, - target_freq, relation, &index); - if (ret) - goto out; - freqs.old = dvfs_info->cur_frequency; freqs.new = freq_table[index].frequency; - if (freqs.old == freqs.new) - goto out; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Set the target frequency in all C0_3_PSTATE register */ @@ -251,9 +235,8 @@ static int exynos_target(struct cpufreq_policy *policy, __raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + i * 4); } -out: mutex_unlock(&cpufreq_lock); - return ret; + return 0; } static void exynos_cpufreq_work(struct work_struct *work) @@ -324,30 +307,19 @@ static void exynos_sort_descend_freq_table(void) static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy) { - int ret; - - ret = cpufreq_frequency_table_cpuinfo(policy, dvfs_info->freq_table); - if (ret) { - dev_err(dvfs_info->dev, "Invalid frequency table: %d\n", ret); - return ret; - } - - policy->cur = dvfs_info->cur_frequency; - policy->cpuinfo.transition_latency = dvfs_info->latency; - cpumask_setall(policy->cpus); - - cpufreq_frequency_table_get_attr(dvfs_info->freq_table, policy->cpu); - - return 0; + return cpufreq_generic_init(policy, dvfs_info->freq_table, + dvfs_info->latency); } static struct cpufreq_driver exynos_driver = { .flags = CPUFREQ_STICKY, - .verify = exynos_verify_speed, - .target = exynos_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = exynos_target, .get = exynos_getspeed, .init = exynos_cpufreq_cpu_init, + .exit = cpufreq_generic_exit, .name = CPUFREQ_NAME, + .attr = cpufreq_generic_attr, }; static const struct of_device_id exynos_cpufreq_match[] = { @@ -399,13 +371,14 @@ static int exynos_cpufreq_probe(struct platform_device *pdev) goto err_put_node; } - ret = opp_init_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table); + ret = dev_pm_opp_init_cpufreq_table(dvfs_info->dev, + &dvfs_info->freq_table); if (ret) { dev_err(dvfs_info->dev, "failed to init cpufreq table: %d\n", ret); goto err_put_node; } - dvfs_info->freq_count = opp_get_opp_count(dvfs_info->dev); + dvfs_info->freq_count = dev_pm_opp_get_opp_count(dvfs_info->dev); exynos_sort_descend_freq_table(); if (of_property_read_u32(np, "clock-latency", &dvfs_info->latency)) @@ -454,7 +427,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev) return 0; err_free_table: - opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table); + dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table); err_put_node: of_node_put(np); dev_err(&pdev->dev, "%s: failed initialization\n", __func__); @@ -464,7 +437,7 @@ err_put_node: static int exynos_cpufreq_remove(struct platform_device *pdev) { cpufreq_unregister_driver(&exynos_driver); - opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table); + dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table); return 0; } diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index f111454a7aea..3458d27f63b4 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -54,31 +54,30 @@ EXPORT_SYMBOL_GPL(cpufreq_frequency_table_cpuinfo); int cpufreq_frequency_table_verify(struct cpufreq_policy *policy, struct cpufreq_frequency_table *table) { - unsigned int next_larger = ~0; - unsigned int i; - unsigned int count = 0; + unsigned int next_larger = ~0, freq, i = 0; + bool found = false; pr_debug("request for verification of policy (%u - %u kHz) for cpu %u\n", policy->min, policy->max, policy->cpu); - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + cpufreq_verify_within_cpu_limits(policy); - for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) { - unsigned int freq = table[i].frequency; + for (; freq = table[i].frequency, freq != CPUFREQ_TABLE_END; i++) { if (freq == CPUFREQ_ENTRY_INVALID) continue; - if ((freq >= policy->min) && (freq <= policy->max)) - count++; - else if ((next_larger > freq) && (freq > policy->max)) + if ((freq >= policy->min) && (freq <= policy->max)) { + found = true; + break; + } + + if ((next_larger > freq) && (freq > policy->max)) next_larger = freq; } - if (!count) + if (!found) { policy->max = next_larger; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + cpufreq_verify_within_cpu_limits(policy); + } pr_debug("verification lead to (%u - %u kHz) for cpu %u\n", policy->min, policy->max, policy->cpu); @@ -87,6 +86,20 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy, } EXPORT_SYMBOL_GPL(cpufreq_frequency_table_verify); +/* + * Generic routine to verify policy & frequency table, requires driver to call + * cpufreq_frequency_table_get_attr() prior to it. + */ +int cpufreq_generic_frequency_table_verify(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *table = + cpufreq_frequency_get_table(policy->cpu); + if (!table) + return -ENODEV; + + return cpufreq_frequency_table_verify(policy, table); +} +EXPORT_SYMBOL_GPL(cpufreq_generic_frequency_table_verify); int cpufreq_frequency_table_target(struct cpufreq_policy *policy, struct cpufreq_frequency_table *table, @@ -200,6 +213,12 @@ struct freq_attr cpufreq_freq_attr_scaling_available_freqs = { }; EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs); +struct freq_attr *cpufreq_generic_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; +EXPORT_SYMBOL_GPL(cpufreq_generic_attr); + /* * if you use these, you must assure that the frequency table is valid * all the time between get_attr and put_attr! @@ -219,6 +238,18 @@ void cpufreq_frequency_table_put_attr(unsigned int cpu) } EXPORT_SYMBOL_GPL(cpufreq_frequency_table_put_attr); +int cpufreq_table_validate_and_show(struct cpufreq_policy *policy, + struct cpufreq_frequency_table *table) +{ + int ret = cpufreq_frequency_table_cpuinfo(policy, table); + + if (!ret) + cpufreq_frequency_table_get_attr(table, policy->cpu); + + return ret; +} +EXPORT_SYMBOL_GPL(cpufreq_table_validate_and_show); + void cpufreq_frequency_table_update_policy_cpu(struct cpufreq_policy *policy) { pr_debug("Updating show_table for new_cpu %u from last_cpu %u\n", diff --git a/drivers/cpufreq/gx-suspmod.c b/drivers/cpufreq/gx-suspmod.c index 70442c7b5e71..d83e8266a58e 100644 --- a/drivers/cpufreq/gx-suspmod.c +++ b/drivers/cpufreq/gx-suspmod.c @@ -401,7 +401,7 @@ static int cpufreq_gx_target(struct cpufreq_policy *policy, static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) { - unsigned int maxfreq, curfreq; + unsigned int maxfreq; if (!policy || policy->cpu != 0) return -ENODEV; @@ -415,10 +415,8 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; stock_freq = maxfreq; - curfreq = gx_get_cpuspeed(0); pr_debug("cpu max frequency is %d.\n", maxfreq); - pr_debug("cpu current frequency is %dkHz.\n", curfreq); /* setup basic struct for cpufreq API */ policy->cpu = 0; @@ -428,7 +426,6 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) else policy->min = maxfreq / POLICY_MIN_DIV; policy->max = maxfreq; - policy->cur = curfreq; policy->cpuinfo.min_freq = maxfreq / max_duration; policy->cpuinfo.max_freq = maxfreq; policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c index 794123fcf3e3..bf8902a0866d 100644 --- a/drivers/cpufreq/highbank-cpufreq.c +++ b/drivers/cpufreq/highbank-cpufreq.c @@ -66,7 +66,8 @@ static int hb_cpufreq_driver_init(void) struct device_node *np; int ret; - if (!of_machine_is_compatible("calxeda,highbank")) + if ((!of_machine_is_compatible("calxeda,highbank")) && + (!of_machine_is_compatible("calxeda,ecx-2000"))) return -ENODEV; cpu_dev = get_cpu_device(0); diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c index 3e14f0317175..4695fa22406a 100644 --- a/drivers/cpufreq/ia64-acpi-cpufreq.c +++ b/drivers/cpufreq/ia64-acpi-cpufreq.c @@ -227,42 +227,11 @@ acpi_cpufreq_get ( static int acpi_cpufreq_target ( struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int index) { - struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; - unsigned int next_state = 0; - unsigned int result = 0; - - pr_debug("acpi_cpufreq_setpolicy\n"); - - result = cpufreq_frequency_table_target(policy, - data->freq_table, target_freq, relation, &next_state); - if (result) - return (result); - - result = processor_set_freq(data, policy, next_state); - - return (result); + return processor_set_freq(acpi_io_data[policy->cpu], policy, index); } - -static int -acpi_cpufreq_verify ( - struct cpufreq_policy *policy) -{ - unsigned int result = 0; - struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; - - pr_debug("acpi_cpufreq_verify\n"); - - result = cpufreq_frequency_table_verify(policy, - data->freq_table); - - return (result); -} - - static int acpi_cpufreq_cpu_init ( struct cpufreq_policy *policy) @@ -321,7 +290,6 @@ acpi_cpufreq_cpu_init ( data->acpi_data.states[i].transition_latency * 1000; } } - policy->cur = processor_get_freq(data, policy->cpu); /* table init */ for (i = 0; i <= data->acpi_data.state_count; i++) @@ -335,7 +303,7 @@ acpi_cpufreq_cpu_init ( } } - result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table); + result = cpufreq_table_validate_and_show(policy, data->freq_table); if (result) { goto err_freqfree; } @@ -356,8 +324,6 @@ acpi_cpufreq_cpu_init ( (u32) data->acpi_data.states[i].status, (u32) data->acpi_data.states[i].control); - cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); - /* the first call to ->target() should result in us actually * writing something to the appropriate registers. */ data->resume = 1; @@ -396,20 +362,14 @@ acpi_cpufreq_cpu_exit ( } -static struct freq_attr* acpi_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - static struct cpufreq_driver acpi_cpufreq_driver = { - .verify = acpi_cpufreq_verify, - .target = acpi_cpufreq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = acpi_cpufreq_target, .get = acpi_cpufreq_get, .init = acpi_cpufreq_cpu_init, .exit = acpi_cpufreq_cpu_exit, .name = "acpi-cpufreq", - .attr = acpi_cpufreq_attr, + .attr = cpufreq_generic_attr, }; diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index c3fd2a101ca0..07af3b0de069 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -13,7 +13,7 @@ #include <linux/err.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> @@ -35,49 +35,31 @@ static struct device *cpu_dev; static struct cpufreq_frequency_table *freq_table; static unsigned int transition_latency; -static int imx6q_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, freq_table); -} - static unsigned int imx6q_get_speed(unsigned int cpu) { return clk_get_rate(arm_clk) / 1000; } -static int imx6q_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) +static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) { struct cpufreq_freqs freqs; - struct opp *opp; + struct dev_pm_opp *opp; unsigned long freq_hz, volt, volt_old; - unsigned int index; int ret; - ret = cpufreq_frequency_table_target(policy, freq_table, target_freq, - relation, &index); - if (ret) { - dev_err(cpu_dev, "failed to match target frequency %d: %d\n", - target_freq, ret); - return ret; - } - freqs.new = freq_table[index].frequency; freq_hz = freqs.new * 1000; freqs.old = clk_get_rate(arm_clk) / 1000; - if (freqs.old == freqs.new) - return 0; - rcu_read_lock(); - opp = opp_find_freq_ceil(cpu_dev, &freq_hz); + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz); if (IS_ERR(opp)) { rcu_read_unlock(); dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz); return PTR_ERR(opp); } - volt = opp_get_voltage(opp); + volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); volt_old = regulator_get_voltage(arm_reg); @@ -159,47 +141,23 @@ post_notify: static int imx6q_cpufreq_init(struct cpufreq_policy *policy) { - int ret; - - ret = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (ret) { - dev_err(cpu_dev, "invalid frequency table: %d\n", ret); - return ret; - } - - policy->cpuinfo.transition_latency = transition_latency; - policy->cur = clk_get_rate(arm_clk) / 1000; - cpumask_setall(policy->cpus); - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - - return 0; -} - -static int imx6q_cpufreq_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; + return cpufreq_generic_init(policy, freq_table, transition_latency); } -static struct freq_attr *imx6q_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver imx6q_cpufreq_driver = { - .verify = imx6q_verify_speed, - .target = imx6q_set_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = imx6q_set_target, .get = imx6q_get_speed, .init = imx6q_cpufreq_init, - .exit = imx6q_cpufreq_exit, + .exit = cpufreq_generic_exit, .name = "imx6q-cpufreq", - .attr = imx6q_cpufreq_attr, + .attr = cpufreq_generic_attr, }; static int imx6q_cpufreq_probe(struct platform_device *pdev) { struct device_node *np; - struct opp *opp; + struct dev_pm_opp *opp; unsigned long min_volt, max_volt; int num, ret; @@ -237,14 +195,14 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) } /* We expect an OPP table supplied by platform */ - num = opp_get_opp_count(cpu_dev); + num = dev_pm_opp_get_opp_count(cpu_dev); if (num < 0) { ret = num; dev_err(cpu_dev, "no OPP table is found: %d\n", ret); goto put_node; } - ret = opp_init_cpufreq_table(cpu_dev, &freq_table); + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); if (ret) { dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); goto put_node; @@ -259,12 +217,12 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) * same order. */ rcu_read_lock(); - opp = opp_find_freq_exact(cpu_dev, + opp = dev_pm_opp_find_freq_exact(cpu_dev, freq_table[0].frequency * 1000, true); - min_volt = opp_get_voltage(opp); - opp = opp_find_freq_exact(cpu_dev, + min_volt = dev_pm_opp_get_voltage(opp); + opp = dev_pm_opp_find_freq_exact(cpu_dev, freq_table[--num].frequency * 1000, true); - max_volt = opp_get_voltage(opp); + max_volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); ret = regulator_set_voltage_time(arm_reg, min_volt, max_volt); if (ret > 0) @@ -292,7 +250,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) return 0; free_freq_table: - opp_free_cpufreq_table(cpu_dev, &freq_table); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); put_node: of_node_put(np); return ret; @@ -301,7 +259,7 @@ put_node: static int imx6q_cpufreq_remove(struct platform_device *pdev) { cpufreq_unregister_driver(&imx6q_cpufreq_driver); - opp_free_cpufreq_table(cpu_dev, &freq_table); + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); return 0; } diff --git a/drivers/cpufreq/integrator-cpufreq.c b/drivers/cpufreq/integrator-cpufreq.c index f7c99df0880b..babf3e40e9fa 100644 --- a/drivers/cpufreq/integrator-cpufreq.c +++ b/drivers/cpufreq/integrator-cpufreq.c @@ -59,9 +59,7 @@ static int integrator_verify_policy(struct cpufreq_policy *policy) { struct icst_vco vco; - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + cpufreq_verify_within_cpu_limits(policy); vco = icst_hz_to_vco(&cclk_params, policy->max * 1000); policy->max = icst_hz(&cclk_params, vco) / 1000; @@ -69,10 +67,7 @@ static int integrator_verify_policy(struct cpufreq_policy *policy) vco = icst_hz_to_vco(&cclk_params, policy->min * 1000); policy->min = icst_hz(&cclk_params, vco) / 1000; - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - + cpufreq_verify_within_cpu_limits(policy); return 0; } @@ -186,10 +181,9 @@ static int integrator_cpufreq_init(struct cpufreq_policy *policy) { /* set default policy and cpuinfo */ - policy->cpuinfo.max_freq = 160000; - policy->cpuinfo.min_freq = 12000; + policy->max = policy->cpuinfo.max_freq = 160000; + policy->min = policy->cpuinfo.min_freq = 12000; policy->cpuinfo.transition_latency = 1000000; /* 1 ms, assumed */ - policy->cur = policy->min = policy->max = integrator_get(policy->cpu); return 0; } diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index eb3fdc755000..89925513fea5 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -33,6 +33,8 @@ #define SAMPLE_COUNT 3 +#define BYT_RATIOS 0x66a + #define FRAC_BITS 8 #define int_tofp(X) ((int64_t)(X) << FRAC_BITS) #define fp_toint(X) ((X) >> FRAC_BITS) @@ -78,7 +80,6 @@ struct cpudata { struct timer_list timer; - struct pstate_adjust_policy *pstate_policy; struct pstate_data pstate; struct _pid pid; @@ -100,15 +101,21 @@ struct pstate_adjust_policy { int i_gain_pct; }; -static struct pstate_adjust_policy default_policy = { - .sample_rate_ms = 10, - .deadband = 0, - .setpoint = 97, - .p_gain_pct = 20, - .d_gain_pct = 0, - .i_gain_pct = 0, +struct pstate_funcs { + int (*get_max)(void); + int (*get_min)(void); + int (*get_turbo)(void); + void (*set)(int pstate); +}; + +struct cpu_defaults { + struct pstate_adjust_policy pid_policy; + struct pstate_funcs funcs; }; +static struct pstate_adjust_policy pid_params; +static struct pstate_funcs pstate_funcs; + struct perf_limits { int no_turbo; int max_perf_pct; @@ -185,14 +192,14 @@ static signed int pid_calc(struct _pid *pid, int32_t busy) static inline void intel_pstate_busy_pid_reset(struct cpudata *cpu) { - pid_p_gain_set(&cpu->pid, cpu->pstate_policy->p_gain_pct); - pid_d_gain_set(&cpu->pid, cpu->pstate_policy->d_gain_pct); - pid_i_gain_set(&cpu->pid, cpu->pstate_policy->i_gain_pct); + pid_p_gain_set(&cpu->pid, pid_params.p_gain_pct); + pid_d_gain_set(&cpu->pid, pid_params.d_gain_pct); + pid_i_gain_set(&cpu->pid, pid_params.i_gain_pct); pid_reset(&cpu->pid, - cpu->pstate_policy->setpoint, + pid_params.setpoint, 100, - cpu->pstate_policy->deadband, + pid_params.deadband, 0); } @@ -226,12 +233,12 @@ struct pid_param { }; static struct pid_param pid_files[] = { - {"sample_rate_ms", &default_policy.sample_rate_ms}, - {"d_gain_pct", &default_policy.d_gain_pct}, - {"i_gain_pct", &default_policy.i_gain_pct}, - {"deadband", &default_policy.deadband}, - {"setpoint", &default_policy.setpoint}, - {"p_gain_pct", &default_policy.p_gain_pct}, + {"sample_rate_ms", &pid_params.sample_rate_ms}, + {"d_gain_pct", &pid_params.d_gain_pct}, + {"i_gain_pct", &pid_params.i_gain_pct}, + {"deadband", &pid_params.deadband}, + {"setpoint", &pid_params.setpoint}, + {"p_gain_pct", &pid_params.p_gain_pct}, {NULL, NULL} }; @@ -336,33 +343,92 @@ static void intel_pstate_sysfs_expose_params(void) } /************************** sysfs end ************************/ +static int byt_get_min_pstate(void) +{ + u64 value; + rdmsrl(BYT_RATIOS, value); + return value & 0xFF; +} + +static int byt_get_max_pstate(void) +{ + u64 value; + rdmsrl(BYT_RATIOS, value); + return (value >> 16) & 0xFF; +} -static int intel_pstate_min_pstate(void) +static int core_get_min_pstate(void) { u64 value; rdmsrl(MSR_PLATFORM_INFO, value); return (value >> 40) & 0xFF; } -static int intel_pstate_max_pstate(void) +static int core_get_max_pstate(void) { u64 value; rdmsrl(MSR_PLATFORM_INFO, value); return (value >> 8) & 0xFF; } -static int intel_pstate_turbo_pstate(void) +static int core_get_turbo_pstate(void) { u64 value; int nont, ret; rdmsrl(MSR_NHM_TURBO_RATIO_LIMIT, value); - nont = intel_pstate_max_pstate(); + nont = core_get_max_pstate(); ret = ((value) & 255); if (ret <= nont) ret = nont; return ret; } +static void core_set_pstate(int pstate) +{ + u64 val; + + val = pstate << 8; + if (limits.no_turbo) + val |= (u64)1 << 32; + + wrmsrl(MSR_IA32_PERF_CTL, val); +} + +static struct cpu_defaults core_params = { + .pid_policy = { + .sample_rate_ms = 10, + .deadband = 0, + .setpoint = 97, + .p_gain_pct = 20, + .d_gain_pct = 0, + .i_gain_pct = 0, + }, + .funcs = { + .get_max = core_get_max_pstate, + .get_min = core_get_min_pstate, + .get_turbo = core_get_turbo_pstate, + .set = core_set_pstate, + }, +}; + +static struct cpu_defaults byt_params = { + .pid_policy = { + .sample_rate_ms = 10, + .deadband = 0, + .setpoint = 97, + .p_gain_pct = 14, + .d_gain_pct = 0, + .i_gain_pct = 4, + }, + .funcs = { + .get_max = byt_get_max_pstate, + .get_min = byt_get_min_pstate, + .get_turbo = byt_get_max_pstate, + .set = core_set_pstate, + }, +}; + + static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max) { int max_perf = cpu->pstate.turbo_pstate; @@ -383,7 +449,6 @@ static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max) static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) { int max_perf, min_perf; - u64 val; intel_pstate_get_min_max(cpu, &min_perf, &max_perf); @@ -395,11 +460,8 @@ static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) trace_cpu_frequency(pstate * 100000, cpu->cpu); cpu->pstate.current_pstate = pstate; - val = pstate << 8; - if (limits.no_turbo) - val |= (u64)1 << 32; - wrmsrl(MSR_IA32_PERF_CTL, val); + pstate_funcs.set(pstate); } static inline void intel_pstate_pstate_increase(struct cpudata *cpu, int steps) @@ -421,9 +483,9 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) { sprintf(cpu->name, "Intel 2nd generation core"); - cpu->pstate.min_pstate = intel_pstate_min_pstate(); - cpu->pstate.max_pstate = intel_pstate_max_pstate(); - cpu->pstate.turbo_pstate = intel_pstate_turbo_pstate(); + cpu->pstate.min_pstate = pstate_funcs.get_min(); + cpu->pstate.max_pstate = pstate_funcs.get_max(); + cpu->pstate.turbo_pstate = pstate_funcs.get_turbo(); /* * goto max pstate so we don't slow up boot if we are built-in if we are @@ -465,7 +527,7 @@ static inline void intel_pstate_set_sample_time(struct cpudata *cpu) { int sample_time, delay; - sample_time = cpu->pstate_policy->sample_rate_ms; + sample_time = pid_params.sample_rate_ms; delay = msecs_to_jiffies(sample_time); mod_timer_pinned(&cpu->timer, jiffies + delay); } @@ -521,14 +583,15 @@ static void intel_pstate_timer_func(unsigned long __data) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, (unsigned long)&policy } static const struct x86_cpu_id intel_pstate_cpu_ids[] = { - ICPU(0x2a, default_policy), - ICPU(0x2d, default_policy), - ICPU(0x3a, default_policy), - ICPU(0x3c, default_policy), - ICPU(0x3e, default_policy), - ICPU(0x3f, default_policy), - ICPU(0x45, default_policy), - ICPU(0x46, default_policy), + ICPU(0x2a, core_params), + ICPU(0x2d, core_params), + ICPU(0x37, byt_params), + ICPU(0x3a, core_params), + ICPU(0x3c, core_params), + ICPU(0x3e, core_params), + ICPU(0x3f, core_params), + ICPU(0x45, core_params), + ICPU(0x46, core_params), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); @@ -552,8 +615,7 @@ static int intel_pstate_init_cpu(unsigned int cpunum) intel_pstate_get_cpu_pstates(cpu); cpu->cpu = cpunum; - cpu->pstate_policy = - (struct pstate_adjust_policy *)id->driver_data; + init_timer_deferrable(&cpu->timer); cpu->timer.function = intel_pstate_timer_func; cpu->timer.data = @@ -613,9 +675,7 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) static int intel_pstate_verify_policy(struct cpufreq_policy *policy) { - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + cpufreq_verify_within_cpu_limits(policy); if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) && (policy->policy != CPUFREQ_POLICY_PERFORMANCE)) @@ -683,9 +743,9 @@ static int intel_pstate_msrs_not_valid(void) rdmsrl(MSR_IA32_APERF, aperf); rdmsrl(MSR_IA32_MPERF, mperf); - if (!intel_pstate_min_pstate() || - !intel_pstate_max_pstate() || - !intel_pstate_turbo_pstate()) + if (!pstate_funcs.get_max() || + !pstate_funcs.get_min() || + !pstate_funcs.get_turbo()) return -ENODEV; rdmsrl(MSR_IA32_APERF, tmp); @@ -698,10 +758,30 @@ static int intel_pstate_msrs_not_valid(void) return 0; } + +void copy_pid_params(struct pstate_adjust_policy *policy) +{ + pid_params.sample_rate_ms = policy->sample_rate_ms; + pid_params.p_gain_pct = policy->p_gain_pct; + pid_params.i_gain_pct = policy->i_gain_pct; + pid_params.d_gain_pct = policy->d_gain_pct; + pid_params.deadband = policy->deadband; + pid_params.setpoint = policy->setpoint; +} + +void copy_cpu_funcs(struct pstate_funcs *funcs) +{ + pstate_funcs.get_max = funcs->get_max; + pstate_funcs.get_min = funcs->get_min; + pstate_funcs.get_turbo = funcs->get_turbo; + pstate_funcs.set = funcs->set; +} + static int __init intel_pstate_init(void) { int cpu, rc = 0; const struct x86_cpu_id *id; + struct cpu_defaults *cpu_info; if (no_load) return -ENODEV; @@ -710,6 +790,11 @@ static int __init intel_pstate_init(void) if (!id) return -ENODEV; + cpu_info = (struct cpu_defaults *)id->driver_data; + + copy_pid_params(&cpu_info->pid_policy); + copy_cpu_funcs(&cpu_info->funcs); + if (intel_pstate_msrs_not_valid()) return -ENODEV; diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index ba10658a9394..0ae4dd7e1f2d 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -55,8 +55,8 @@ static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu) return kirkwood_freq_table[0].frequency; } -static void kirkwood_cpufreq_set_cpu_state(struct cpufreq_policy *policy, - unsigned int index) +static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) { struct cpufreq_freqs freqs; unsigned int state = kirkwood_freq_table[index].driver_data; @@ -100,24 +100,6 @@ static void kirkwood_cpufreq_set_cpu_state(struct cpufreq_policy *policy, local_irq_enable(); } cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); -}; - -static int kirkwood_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, kirkwood_freq_table); -} - -static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int index = 0; - - if (cpufreq_frequency_table_target(policy, kirkwood_freq_table, - target_freq, relation, &index)) - return -EINVAL; - - kirkwood_cpufreq_set_cpu_state(policy, index); return 0; } @@ -125,40 +107,17 @@ static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, /* Module init and exit code */ static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy) { - int result; - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 5000; /* 5uS */ - policy->cur = kirkwood_cpufreq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, kirkwood_freq_table); - if (result) - return result; - - cpufreq_frequency_table_get_attr(kirkwood_freq_table, policy->cpu); - - return 0; -} - -static int kirkwood_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; + return cpufreq_generic_init(policy, kirkwood_freq_table, 5000); } -static struct freq_attr *kirkwood_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver kirkwood_cpufreq_driver = { .get = kirkwood_cpufreq_get_cpu_frequency, - .verify = kirkwood_cpufreq_verify, - .target = kirkwood_cpufreq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = kirkwood_cpufreq_target, .init = kirkwood_cpufreq_cpu_init, - .exit = kirkwood_cpufreq_cpu_exit, + .exit = cpufreq_generic_exit, .name = "kirkwood-cpufreq", - .attr = kirkwood_cpufreq_attr, + .attr = cpufreq_generic_attr, }; static int kirkwood_cpufreq_probe(struct platform_device *pdev) diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c index 4ada1cccb052..45bafddfd8ea 100644 --- a/drivers/cpufreq/longhaul.c +++ b/drivers/cpufreq/longhaul.c @@ -625,28 +625,13 @@ static void longhaul_setup_voltagescaling(void) } -static int longhaul_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, longhaul_table); -} - - static int longhaul_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) + unsigned int table_index) { - unsigned int table_index = 0; unsigned int i; unsigned int dir = 0; u8 vid, current_vid; - if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, - relation, &table_index)) - return -EINVAL; - - /* Don't set same frequency again */ - if (longhaul_index == table_index) - return 0; - if (!can_scale_voltage) longhaul_setstate(policy, table_index); else { @@ -919,36 +904,18 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_setup_voltagescaling(); policy->cpuinfo.transition_latency = 200000; /* nsec */ - policy->cur = calc_speed(longhaul_get_cpu_mult()); - - ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table); - if (ret) - return ret; - - cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu); - return 0; + return cpufreq_table_validate_and_show(policy, longhaul_table); } -static int longhaul_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *longhaul_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver longhaul_driver = { - .verify = longhaul_verify, - .target = longhaul_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = longhaul_target, .get = longhaul_get, .init = longhaul_cpu_init, - .exit = longhaul_cpu_exit, + .exit = cpufreq_generic_exit, .name = "longhaul", - .attr = longhaul_attr, + .attr = cpufreq_generic_attr, }; static const struct x86_cpu_id longhaul_id[] = { diff --git a/drivers/cpufreq/longrun.c b/drivers/cpufreq/longrun.c index 5aa031612d53..074971b12635 100644 --- a/drivers/cpufreq/longrun.c +++ b/drivers/cpufreq/longrun.c @@ -129,9 +129,7 @@ static int longrun_verify_policy(struct cpufreq_policy *policy) return -EINVAL; policy->cpu = 0; - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + cpufreq_verify_within_cpu_limits(policy); if ((policy->policy != CPUFREQ_POLICY_POWERSAVE) && (policy->policy != CPUFREQ_POLICY_PERFORMANCE)) diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index 7bc3c44d34e2..41a8e2cdf940 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -53,11 +53,9 @@ static unsigned int loongson2_cpufreq_get(unsigned int cpu) * Here we notify other drivers of the proposed change and the final change. */ static int loongson2_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int index) { unsigned int cpu = policy->cpu; - unsigned int newstate = 0; cpumask_t cpus_allowed; struct cpufreq_freqs freqs; unsigned int freq; @@ -65,26 +63,17 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy, cpus_allowed = current->cpus_allowed; set_cpus_allowed_ptr(current, cpumask_of(cpu)); - if (cpufreq_frequency_table_target - (policy, &loongson2_clockmod_table[0], target_freq, relation, - &newstate)) - return -EINVAL; - freq = ((cpu_clock_freq / 1000) * - loongson2_clockmod_table[newstate].driver_data) / 8; - if (freq < policy->min || freq > policy->max) - return -EINVAL; + loongson2_clockmod_table[index].driver_data) / 8; - pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000); + pr_debug("cpufreq: requested frequency %u Hz\n", + loongson2_clockmod_table[index].frequency * 1000); freqs.old = loongson2_cpufreq_get(cpu); freqs.new = freq; freqs.flags = 0; - if (freqs.new == freqs.old) - return 0; - /* notifiers */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); @@ -131,40 +120,24 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) return ret; } - policy->cur = loongson2_cpufreq_get(policy->cpu); - - cpufreq_frequency_table_get_attr(&loongson2_clockmod_table[0], - policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, - &loongson2_clockmod_table[0]); -} - -static int loongson2_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - &loongson2_clockmod_table[0]); + return cpufreq_generic_init(policy, &loongson2_clockmod_table[0], 0); } static int loongson2_cpufreq_exit(struct cpufreq_policy *policy) { + cpufreq_frequency_table_put_attr(policy->cpu); clk_put(cpuclk); return 0; } -static struct freq_attr *loongson2_table_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver loongson2_cpufreq_driver = { .name = "loongson2", .init = loongson2_cpufreq_cpu_init, - .verify = loongson2_cpufreq_verify, - .target = loongson2_cpufreq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = loongson2_cpufreq_target, .get = loongson2_cpufreq_get, .exit = loongson2_cpufreq_exit, - .attr = loongson2_table_attr, + .attr = cpufreq_generic_attr, }; static struct platform_device_id platform_device_ids[] = { diff --git a/drivers/cpufreq/maple-cpufreq.c b/drivers/cpufreq/maple-cpufreq.c index 6168d77b296d..4e2da0874bfb 100644 --- a/drivers/cpufreq/maple-cpufreq.c +++ b/drivers/cpufreq/maple-cpufreq.c @@ -64,11 +64,6 @@ static struct cpufreq_frequency_table maple_cpu_freqs[] = { {0, CPUFREQ_TABLE_END}, }; -static struct freq_attr *maple_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - /* Power mode data is an array of the 32 bits PCR values to use for * the various frequencies, retrieved from the device-tree */ @@ -135,32 +130,19 @@ static int maple_scom_query_freq(void) * Common interface to the cpufreq core */ -static int maple_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, maple_cpu_freqs); -} - static int maple_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) + unsigned int index) { - unsigned int newstate = 0; struct cpufreq_freqs freqs; int rc; - if (cpufreq_frequency_table_target(policy, maple_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - if (maple_pmode_cur == newstate) - return 0; - mutex_lock(&maple_switch_mutex); freqs.old = maple_cpu_freqs[maple_pmode_cur].frequency; - freqs.new = maple_cpu_freqs[newstate].frequency; + freqs.new = maple_cpu_freqs[index].frequency; cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - rc = maple_scom_switch_freq(newstate); + rc = maple_scom_switch_freq(index); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); mutex_unlock(&maple_switch_mutex); @@ -175,27 +157,17 @@ static unsigned int maple_cpufreq_get_speed(unsigned int cpu) static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy) { - policy->cpuinfo.transition_latency = 12000; - policy->cur = maple_cpu_freqs[maple_scom_query_freq()].frequency; - /* secondary CPUs are tied to the primary one by the - * cpufreq core if in the secondary policy we tell it that - * it actually must be one policy together with all others. */ - cpumask_setall(policy->cpus); - cpufreq_frequency_table_get_attr(maple_cpu_freqs, policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, - maple_cpu_freqs); + return cpufreq_generic_init(policy, maple_cpu_freqs, 12000); } - static struct cpufreq_driver maple_cpufreq_driver = { .name = "maple", .flags = CPUFREQ_CONST_LOOPS, .init = maple_cpufreq_cpu_init, - .verify = maple_cpufreq_verify, - .target = maple_cpufreq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = maple_cpufreq_target, .get = maple_cpufreq_get_speed, - .attr = maple_cpu_freqs_attr, + .attr = cpufreq_generic_attr, }; static int __init maple_cpufreq_init(void) diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index f31fcfcad514..b5512712298f 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -22,7 +22,7 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/cpu.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -40,13 +40,6 @@ static struct clk *mpu_clk; static struct device *mpu_dev; static struct regulator *mpu_reg; -static int omap_verify_speed(struct cpufreq_policy *policy) -{ - if (!freq_table) - return -EINVAL; - return cpufreq_frequency_table_verify(policy, freq_table); -} - static unsigned int omap_getspeed(unsigned int cpu) { unsigned long rate; @@ -58,40 +51,15 @@ static unsigned int omap_getspeed(unsigned int cpu) return rate; } -static int omap_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int omap_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int i; int r, ret = 0; struct cpufreq_freqs freqs; - struct opp *opp; + struct dev_pm_opp *opp; unsigned long freq, volt = 0, volt_old = 0, tol = 0; - if (!freq_table) { - dev_err(mpu_dev, "%s: cpu%d: no freq table!\n", __func__, - policy->cpu); - return -EINVAL; - } - - ret = cpufreq_frequency_table_target(policy, freq_table, target_freq, - relation, &i); - if (ret) { - dev_dbg(mpu_dev, "%s: cpu%d: no freq match for %d(ret=%d)\n", - __func__, policy->cpu, target_freq, ret); - return ret; - } - freqs.new = freq_table[i].frequency; - if (!freqs.new) { - dev_err(mpu_dev, "%s: cpu%d: no match for freq %d\n", __func__, - policy->cpu, target_freq); - return -EINVAL; - } - freqs.old = omap_getspeed(policy->cpu); - - if (freqs.old == freqs.new && policy->cur == freqs.new) - return ret; + freqs.new = freq_table[index].frequency; freq = freqs.new * 1000; ret = clk_round_rate(mpu_clk, freq); @@ -105,14 +73,14 @@ static int omap_target(struct cpufreq_policy *policy, if (mpu_reg) { rcu_read_lock(); - opp = opp_find_freq_ceil(mpu_dev, &freq); + opp = dev_pm_opp_find_freq_ceil(mpu_dev, &freq); if (IS_ERR(opp)) { rcu_read_unlock(); dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n", __func__, freqs.new); return -EINVAL; } - volt = opp_get_voltage(opp); + volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); tol = volt * OPP_TOLERANCE / 100; volt_old = regulator_get_voltage(mpu_reg); @@ -162,86 +130,57 @@ done: static inline void freq_table_free(void) { if (atomic_dec_and_test(&freq_table_users)) - opp_free_cpufreq_table(mpu_dev, &freq_table); + dev_pm_opp_free_cpufreq_table(mpu_dev, &freq_table); } static int omap_cpu_init(struct cpufreq_policy *policy) { - int result = 0; + int result; mpu_clk = clk_get(NULL, "cpufreq_ck"); if (IS_ERR(mpu_clk)) return PTR_ERR(mpu_clk); - if (policy->cpu >= NR_CPUS) { - result = -EINVAL; - goto fail_ck; - } - - policy->cur = omap_getspeed(policy->cpu); - - if (!freq_table) - result = opp_init_cpufreq_table(mpu_dev, &freq_table); - - if (result) { - dev_err(mpu_dev, "%s: cpu%d: failed creating freq table[%d]\n", + if (!freq_table) { + result = dev_pm_opp_init_cpufreq_table(mpu_dev, &freq_table); + if (result) { + dev_err(mpu_dev, + "%s: cpu%d: failed creating freq table[%d]\n", __func__, policy->cpu, result); - goto fail_ck; + goto fail; + } } atomic_inc_return(&freq_table_users); - result = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (result) - goto fail_table; - - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - - policy->cur = omap_getspeed(policy->cpu); - - /* - * On OMAP SMP configuartion, both processors share the voltage - * and clock. So both CPUs needs to be scaled together and hence - * needs software co-ordination. Use cpufreq affected_cpus - * interface to handle this scenario. Additional is_smp() check - * is to keep SMP_ON_UP build working. - */ - if (is_smp()) - cpumask_setall(policy->cpus); - /* FIXME: what's the actual transition time? */ - policy->cpuinfo.transition_latency = 300 * 1000; - - return 0; + result = cpufreq_generic_init(policy, freq_table, 300 * 1000); + if (!result) + return 0; -fail_table: freq_table_free(); -fail_ck: +fail: clk_put(mpu_clk); return result; } static int omap_cpu_exit(struct cpufreq_policy *policy) { + cpufreq_frequency_table_put_attr(policy->cpu); freq_table_free(); clk_put(mpu_clk); return 0; } -static struct freq_attr *omap_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver omap_driver = { .flags = CPUFREQ_STICKY, - .verify = omap_verify_speed, - .target = omap_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = omap_target, .get = omap_getspeed, .init = omap_cpu_init, .exit = omap_cpu_exit, .name = "omap", - .attr = omap_cpufreq_attr, + .attr = cpufreq_generic_attr, }; static int omap_cpufreq_probe(struct platform_device *pdev) diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c index 2f0a2a65c37f..3c23053afdfd 100644 --- a/drivers/cpufreq/p4-clockmod.c +++ b/drivers/cpufreq/p4-clockmod.c @@ -105,23 +105,13 @@ static struct cpufreq_frequency_table p4clockmod_table[] = { }; -static int cpufreq_p4_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int cpufreq_p4_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int newstate = DC_RESV; struct cpufreq_freqs freqs; int i; - if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], - target_freq, relation, &newstate)) - return -EINVAL; - freqs.old = cpufreq_p4_get(policy->cpu); - freqs.new = stock_freq * p4clockmod_table[newstate].driver_data / 8; - - if (freqs.new == freqs.old) - return 0; + freqs.new = stock_freq * p4clockmod_table[index].driver_data / 8; /* notifiers */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); @@ -131,7 +121,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, * Developer's Manual, Volume 3 */ for_each_cpu(i, policy->cpus) - cpufreq_p4_setdc(i, p4clockmod_table[newstate].driver_data); + cpufreq_p4_setdc(i, p4clockmod_table[index].driver_data); /* notifiers */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); @@ -140,12 +130,6 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, } -static int cpufreq_p4_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &p4clockmod_table[0]); -} - - static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) { if (c->x86 == 0x06) { @@ -230,25 +214,17 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) else p4clockmod_table[i].frequency = (stock_freq * i)/8; } - cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); /* cpuinfo and default policy values */ /* the transition latency is set to be 1 higher than the maximum * transition latency of the ondemand governor */ policy->cpuinfo.transition_latency = 10000001; - policy->cur = stock_freq; - return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]); + return cpufreq_table_validate_and_show(policy, &p4clockmod_table[0]); } -static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - static unsigned int cpufreq_p4_get(unsigned int cpu) { u32 l, h; @@ -267,19 +243,14 @@ static unsigned int cpufreq_p4_get(unsigned int cpu) return stock_freq; } -static struct freq_attr *p4clockmod_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver p4clockmod_driver = { - .verify = cpufreq_p4_verify, - .target = cpufreq_p4_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = cpufreq_p4_target, .init = cpufreq_p4_cpu_init, - .exit = cpufreq_p4_cpu_exit, + .exit = cpufreq_generic_exit, .get = cpufreq_p4_get, .name = "p4-clockmod", - .attr = p4clockmod_attr, + .attr = cpufreq_generic_attr, }; static const struct x86_cpu_id cpufreq_p4_id[] = { diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c index 534e43a60d1f..17424ddc7f67 100644 --- a/drivers/cpufreq/pasemi-cpufreq.c +++ b/drivers/cpufreq/pasemi-cpufreq.c @@ -69,11 +69,6 @@ static struct cpufreq_frequency_table pas_freqs[] = { {0, CPUFREQ_TABLE_END}, }; -static struct freq_attr *pas_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - /* * hardware specific functions */ @@ -209,22 +204,13 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) pr_debug("%d: %d\n", i, pas_freqs[i].frequency); } - policy->cpuinfo.transition_latency = get_gizmo_latency(); - cur_astate = get_cur_astate(policy->cpu); pr_debug("current astate is at %d\n",cur_astate); policy->cur = pas_freqs[cur_astate].frequency; - cpumask_copy(policy->cpus, cpu_online_mask); - ppc_proc_freq = policy->cur * 1000ul; - cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu); - - /* this ensures that policy->cpuinfo_min and policy->cpuinfo_max - * are set correctly - */ - return cpufreq_frequency_table_cpuinfo(policy, pas_freqs); + return cpufreq_generic_init(policy, pas_freqs, get_gizmo_latency()); out_unmap_sdcpwr: iounmap(sdcpwr_mapbase); @@ -253,25 +239,12 @@ static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) return 0; } -static int pas_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pas_freqs); -} - static int pas_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int pas_astate_new) { struct cpufreq_freqs freqs; - int pas_astate_new; int i; - cpufreq_frequency_table_target(policy, - pas_freqs, - target_freq, - relation, - &pas_astate_new); - freqs.old = policy->cur; freqs.new = pas_freqs[pas_astate_new].frequency; @@ -300,9 +273,9 @@ static struct cpufreq_driver pas_cpufreq_driver = { .flags = CPUFREQ_CONST_LOOPS, .init = pas_cpufreq_cpu_init, .exit = pas_cpufreq_cpu_exit, - .verify = pas_cpufreq_verify, - .target = pas_cpufreq_target, - .attr = pas_cpu_freqs_attr, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pas_cpufreq_target, + .attr = cpufreq_generic_attr, }; /* diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c index 70438de5c0e4..e2b4f40ff69a 100644 --- a/drivers/cpufreq/pcc-cpufreq.c +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -111,8 +111,7 @@ static struct pcc_cpu __percpu *pcc_cpu_info; static int pcc_cpufreq_verify(struct cpufreq_policy *policy) { - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + cpufreq_verify_within_cpu_limits(policy); return 0; } @@ -559,13 +558,6 @@ static int pcc_cpufreq_cpu_init(struct cpufreq_policy *policy) ioread32(&pcch_hdr->nominal) * 1000; policy->min = policy->cpuinfo.min_freq = ioread32(&pcch_hdr->minimum_frequency) * 1000; - policy->cur = pcc_get_freq(cpu); - - if (!policy->cur) { - pr_debug("init: Unable to get current CPU frequency\n"); - result = -EINVAL; - goto out; - } pr_debug("init: policy->max is %d, policy->min is %d\n", policy->max, policy->min); diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c index a096cd3fa23d..05f705e1b7a2 100644 --- a/drivers/cpufreq/pmac32-cpufreq.c +++ b/drivers/cpufreq/pmac32-cpufreq.c @@ -86,11 +86,6 @@ static struct cpufreq_frequency_table pmac_cpu_freqs[] = { {0, CPUFREQ_TABLE_END}, }; -static struct freq_attr* pmac_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static inline void local_delay(unsigned long ms) { if (no_schedule) @@ -378,23 +373,12 @@ static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) return cur_freq; } -static int pmac_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); -} - static int pmac_cpufreq_target( struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int index) { - unsigned int newstate = 0; int rc; - if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - rc = do_set_cpu_speed(policy, newstate, 1); + rc = do_set_cpu_speed(policy, index, 1); ppc_proc_freq = cur_freq * 1000ul; return rc; @@ -402,14 +386,7 @@ static int pmac_cpufreq_target( struct cpufreq_policy *policy, static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) { - if (policy->cpu != 0) - return -ENODEV; - - policy->cpuinfo.transition_latency = transition_latency; - policy->cur = cur_freq; - - cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); + return cpufreq_generic_init(policy, pmac_cpu_freqs, transition_latency); } static u32 read_gpio(struct device_node *np) @@ -469,14 +446,14 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy) } static struct cpufreq_driver pmac_cpufreq_driver = { - .verify = pmac_cpufreq_verify, - .target = pmac_cpufreq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pmac_cpufreq_target, .get = pmac_cpufreq_get_speed, .init = pmac_cpufreq_cpu_init, .suspend = pmac_cpufreq_suspend, .resume = pmac_cpufreq_resume, .flags = CPUFREQ_PM_NO_WARN, - .attr = pmac_cpu_freqs_attr, + .attr = cpufreq_generic_attr, .name = "powermac", }; diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c index 3a51ad7e47c8..234b598ce416 100644 --- a/drivers/cpufreq/pmac64-cpufreq.c +++ b/drivers/cpufreq/pmac64-cpufreq.c @@ -70,11 +70,6 @@ static struct cpufreq_frequency_table g5_cpu_freqs[] = { {0, CPUFREQ_TABLE_END}, }; -static struct freq_attr* g5_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - /* Power mode data is an array of the 32 bits PCR values to use for * the various frequencies, retrieved from the device-tree */ @@ -142,7 +137,7 @@ static void g5_vdnap_switch_volt(int speed_mode) pmf_call_one(pfunc_vdnap0_complete, &args); if (done) break; - msleep(1); + usleep_range(1000, 1000); } if (done == 0) printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); @@ -241,7 +236,7 @@ static void g5_pfunc_switch_volt(int speed_mode) if (pfunc_cpu1_volt_low) pmf_call_one(pfunc_cpu1_volt_low, NULL); } - msleep(10); /* should be faster , to fix */ + usleep_range(10000, 10000); /* should be faster , to fix */ } /* @@ -286,7 +281,7 @@ static int g5_pfunc_switch_freq(int speed_mode) pmf_call_one(pfunc_slewing_done, &args); if (done) break; - msleep(1); + usleep_range(500, 500); } if (done == 0) printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); @@ -317,32 +312,18 @@ static int g5_pfunc_query_freq(void) * Common interface to the cpufreq core */ -static int g5_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, g5_cpu_freqs); -} - -static int g5_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) +static int g5_cpufreq_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int newstate = 0; struct cpufreq_freqs freqs; int rc; - if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - if (g5_pmode_cur == newstate) - return 0; - mutex_lock(&g5_switch_mutex); freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; - freqs.new = g5_cpu_freqs[newstate].frequency; + freqs.new = g5_cpu_freqs[index].frequency; cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - rc = g5_switch_freq(newstate); + rc = g5_switch_freq(index); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); mutex_unlock(&g5_switch_mutex); @@ -357,27 +338,17 @@ static unsigned int g5_cpufreq_get_speed(unsigned int cpu) static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) { - policy->cpuinfo.transition_latency = transition_latency; - policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; - /* secondary CPUs are tied to the primary one by the - * cpufreq core if in the secondary policy we tell it that - * it actually must be one policy together with all others. */ - cpumask_copy(policy->cpus, cpu_online_mask); - cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, - g5_cpu_freqs); + return cpufreq_generic_init(policy, g5_cpu_freqs, transition_latency); } - static struct cpufreq_driver g5_cpufreq_driver = { .name = "powermac", .flags = CPUFREQ_CONST_LOOPS, .init = g5_cpufreq_cpu_init, - .verify = g5_cpufreq_verify, - .target = g5_cpufreq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = g5_cpufreq_target, .get = g5_cpufreq_get_speed, - .attr = g5_cpu_freqs_attr, + .attr = cpufreq_generic_attr, }; @@ -397,7 +368,8 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode) /* Check supported platforms */ if (of_machine_is_compatible("PowerMac8,1") || of_machine_is_compatible("PowerMac8,2") || - of_machine_is_compatible("PowerMac9,1")) + of_machine_is_compatible("PowerMac9,1") || + of_machine_is_compatible("PowerMac12,1")) use_volts_smu = 1; else if (of_machine_is_compatible("PowerMac11,2")) use_volts_vdnap = 1; @@ -647,8 +619,10 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode) g5_cpu_freqs[0].frequency = max_freq; g5_cpu_freqs[1].frequency = min_freq; + /* Based on a measurement on Xserve G5, rounded up. */ + transition_latency = 10 * NSEC_PER_MSEC; + /* Set callbacks */ - transition_latency = CPUFREQ_ETERNAL; g5_switch_volt = g5_pfunc_switch_volt; g5_switch_freq = g5_pfunc_switch_freq; g5_query_freq = g5_pfunc_query_freq; diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c index 85f1c8c25ddc..643e7952cad3 100644 --- a/drivers/cpufreq/powernow-k6.c +++ b/drivers/cpufreq/powernow-k6.c @@ -63,12 +63,12 @@ static int powernow_k6_get_cpu_multiplier(void) /** - * powernow_k6_set_state - set the PowerNow! multiplier + * powernow_k6_target - set the PowerNow! multiplier * @best_i: clock_ratio[best_i] is the target multiplier * * Tries to change the PowerNow! multiplier */ -static void powernow_k6_set_state(struct cpufreq_policy *policy, +static int powernow_k6_target(struct cpufreq_policy *policy, unsigned int best_i) { unsigned long outvalue = 0, invalue = 0; @@ -77,7 +77,7 @@ static void powernow_k6_set_state(struct cpufreq_policy *policy, if (clock_ratio[best_i].driver_data > max_multiplier) { printk(KERN_ERR PFX "invalid target frequency\n"); - return; + return -EINVAL; } freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); @@ -100,44 +100,6 @@ static void powernow_k6_set_state(struct cpufreq_policy *policy, cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - return; -} - - -/** - * powernow_k6_verify - verifies a new CPUfreq policy - * @policy: new policy - * - * Policy must be within lowest and highest possible CPU Frequency, - * and at least one possible state must be within min and max. - */ -static int powernow_k6_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &clock_ratio[0]); -} - - -/** - * powernow_k6_setpolicy - sets a new CPUFreq policy - * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) - * - * sets a new CPUFreq policy - */ -static int powernow_k6_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, &clock_ratio[0], - target_freq, relation, &newstate)) - return -EINVAL; - - powernow_k6_set_state(policy, newstate); - return 0; } @@ -145,7 +107,6 @@ static int powernow_k6_target(struct cpufreq_policy *policy, static int powernow_k6_cpu_init(struct cpufreq_policy *policy) { unsigned int i, f; - int result; if (policy->cpu != 0) return -ENODEV; @@ -165,15 +126,8 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) /* cpuinfo and default policy values */ policy->cpuinfo.transition_latency = 200000; - policy->cur = busfreq * max_multiplier; - - result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio); - if (result) - return result; - - cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu); - return 0; + return cpufreq_table_validate_and_show(policy, clock_ratio); } @@ -182,7 +136,7 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) unsigned int i; for (i = 0; i < 8; i++) { if (i == max_multiplier) - powernow_k6_set_state(policy, i); + powernow_k6_target(policy, i); } cpufreq_frequency_table_put_attr(policy->cpu); return 0; @@ -195,19 +149,14 @@ static unsigned int powernow_k6_get(unsigned int cpu) return ret; } -static struct freq_attr *powernow_k6_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver powernow_k6_driver = { - .verify = powernow_k6_verify, - .target = powernow_k6_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = powernow_k6_target, .init = powernow_k6_cpu_init, .exit = powernow_k6_cpu_exit, .get = powernow_k6_get, .name = "powernow-k6", - .attr = powernow_k6_attr, + .attr = cpufreq_generic_attr, }; static const struct x86_cpu_id powernow_k6_ids[] = { diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c index 14ce480be8ab..946708a1d745 100644 --- a/drivers/cpufreq/powernow-k7.c +++ b/drivers/cpufreq/powernow-k7.c @@ -248,7 +248,7 @@ static void change_VID(int vid) } -static void change_speed(struct cpufreq_policy *policy, unsigned int index) +static int powernow_target(struct cpufreq_policy *policy, unsigned int index) { u8 fid, vid; struct cpufreq_freqs freqs; @@ -291,6 +291,8 @@ static void change_speed(struct cpufreq_policy *policy, unsigned int index) local_irq_enable(); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); + + return 0; } @@ -533,27 +535,6 @@ static int powernow_decode_bios(int maxfid, int startvid) } -static int powernow_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate; - - if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, - relation, &newstate)) - return -EINVAL; - - change_speed(policy, newstate); - - return 0; -} - - -static int powernow_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, powernow_table); -} - /* * We use the fact that the bus frequency is somehow * a multiple of 100000/3 khz, then we compute sgtc according @@ -678,11 +659,7 @@ static int powernow_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency); - policy->cur = powernow_get(0); - - cpufreq_frequency_table_get_attr(powernow_table, policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, powernow_table); + return cpufreq_table_validate_and_show(policy, powernow_table); } static int powernow_cpu_exit(struct cpufreq_policy *policy) @@ -701,14 +678,9 @@ static int powernow_cpu_exit(struct cpufreq_policy *policy) return 0; } -static struct freq_attr *powernow_table_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver powernow_driver = { - .verify = powernow_verify, - .target = powernow_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = powernow_target, .get = powernow_get, #ifdef CONFIG_X86_POWERNOW_K7_ACPI .bios_limit = acpi_processor_get_bios_limit, @@ -716,7 +688,7 @@ static struct cpufreq_driver powernow_driver = { .init = powernow_cpu_init, .exit = powernow_cpu_exit, .name = "powernow-k7", - .attr = powernow_table_attr, + .attr = cpufreq_generic_attr, }; static int __init powernow_init(void) diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index 2344a9ed17f3..62a1ce47d3df 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -977,20 +977,17 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, struct powernowk8_target_arg { struct cpufreq_policy *pol; - unsigned targfreq; - unsigned relation; + unsigned newstate; }; static long powernowk8_target_fn(void *arg) { struct powernowk8_target_arg *pta = arg; struct cpufreq_policy *pol = pta->pol; - unsigned targfreq = pta->targfreq; - unsigned relation = pta->relation; + unsigned newstate = pta->newstate; struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); u32 checkfid; u32 checkvid; - unsigned int newstate; int ret; if (!data) @@ -1004,8 +1001,9 @@ static long powernowk8_target_fn(void *arg) return -EIO; } - pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n", - pol->cpu, targfreq, pol->min, pol->max, relation); + pr_debug("targ: cpu %d, %d kHz, min %d, max %d\n", + pol->cpu, data->powernow_table[newstate].frequency, pol->min, + pol->max); if (query_current_values_with_pending_wait(data)) return -EIO; @@ -1021,10 +1019,6 @@ static long powernowk8_target_fn(void *arg) checkvid, data->currvid); } - if (cpufreq_frequency_table_target(pol, data->powernow_table, - targfreq, relation, &newstate)) - return -EIO; - mutex_lock(&fidvid_mutex); powernow_k8_acpi_pst_values(data, newstate); @@ -1044,26 +1038,13 @@ static long powernowk8_target_fn(void *arg) } /* Driver entry point to switch to the target frequency */ -static int powernowk8_target(struct cpufreq_policy *pol, - unsigned targfreq, unsigned relation) +static int powernowk8_target(struct cpufreq_policy *pol, unsigned index) { - struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq, - .relation = relation }; + struct powernowk8_target_arg pta = { .pol = pol, .newstate = index }; return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta); } -/* Driver entry point to verify the policy and range of frequencies */ -static int powernowk8_verify(struct cpufreq_policy *pol) -{ - struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); - - if (!data) - return -EINVAL; - - return cpufreq_frequency_table_verify(pol, data->powernow_table); -} - struct init_on_cpu { struct powernow_k8_data *data; int rc; @@ -1152,11 +1133,8 @@ static int powernowk8_cpu_init(struct cpufreq_policy *pol) cpumask_copy(pol->cpus, cpu_core_mask(pol->cpu)); data->available_cores = pol->cpus; - pol->cur = find_khz_freq_from_fid(data->currfid); - pr_debug("policy current frequency %d kHz\n", pol->cur); - /* min/max the cpu is capable of */ - if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) { + if (cpufreq_table_validate_and_show(pol, data->powernow_table)) { printk(KERN_ERR FW_BUG PFX "invalid powernow_table\n"); powernow_k8_cpu_exit_acpi(data); kfree(data->powernow_table); @@ -1164,8 +1142,6 @@ static int powernowk8_cpu_init(struct cpufreq_policy *pol) return -EINVAL; } - cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); - pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); @@ -1227,20 +1203,15 @@ out: return khz; } -static struct freq_attr *powernow_k8_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver cpufreq_amd64_driver = { - .verify = powernowk8_verify, - .target = powernowk8_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = powernowk8_target, .bios_limit = acpi_processor_get_bios_limit, .init = powernowk8_cpu_init, .exit = powernowk8_cpu_exit, .get = powernowk8_get, .name = "powernow-k8", - .attr = powernow_k8_attr, + .attr = cpufreq_generic_attr, }; static void __request_acpi_cpufreq(void) diff --git a/drivers/cpufreq/ppc-corenet-cpufreq.c b/drivers/cpufreq/ppc-corenet-cpufreq.c index 60e81d524ea8..79d8e9c46b6d 100644 --- a/drivers/cpufreq/ppc-corenet-cpufreq.c +++ b/drivers/cpufreq/ppc-corenet-cpufreq.c @@ -202,7 +202,7 @@ static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy) table[i].frequency = CPUFREQ_TABLE_END; /* set the min and max frequency properly */ - ret = cpufreq_frequency_table_cpuinfo(policy, table); + ret = cpufreq_table_validate_and_show(policy, table); if (ret) { pr_err("invalid frequency table: %d\n", ret); goto err_nomem1; @@ -217,9 +217,6 @@ static int corenet_cpufreq_cpu_init(struct cpufreq_policy *policy) per_cpu(cpu_data, i) = data; policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = corenet_cpufreq_get_speed(policy->cpu); - - cpufreq_frequency_table_get_attr(table, cpu); of_node_put(np); return 0; @@ -253,36 +250,21 @@ static int __exit corenet_cpufreq_cpu_exit(struct cpufreq_policy *policy) return 0; } -static int corenet_cpufreq_verify(struct cpufreq_policy *policy) -{ - struct cpufreq_frequency_table *table = - per_cpu(cpu_data, policy->cpu)->table; - - return cpufreq_frequency_table_verify(policy, table); -} - static int corenet_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) + unsigned int index) { struct cpufreq_freqs freqs; - unsigned int new; struct clk *parent; int ret; struct cpu_data *data = per_cpu(cpu_data, policy->cpu); - cpufreq_frequency_table_target(policy, data->table, - target_freq, relation, &new); - - if (policy->cur == data->table[new].frequency) - return 0; - freqs.old = policy->cur; - freqs.new = data->table[new].frequency; + freqs.new = data->table[index].frequency; mutex_lock(&cpufreq_lock); cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - parent = of_clk_get(data->parent, data->table[new].driver_data); + parent = of_clk_get(data->parent, data->table[index].driver_data); ret = clk_set_parent(data->clk, parent); if (ret) freqs.new = freqs.old; @@ -293,20 +275,15 @@ static int corenet_cpufreq_target(struct cpufreq_policy *policy, return ret; } -static struct freq_attr *corenet_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver ppc_corenet_cpufreq_driver = { .name = "ppc_cpufreq", .flags = CPUFREQ_CONST_LOOPS, .init = corenet_cpufreq_cpu_init, .exit = __exit_p(corenet_cpufreq_cpu_exit), - .verify = corenet_cpufreq_verify, - .target = corenet_cpufreq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = corenet_cpufreq_target, .get = corenet_cpufreq_get_speed, - .attr = corenet_cpufreq_attr, + .attr = cpufreq_generic_attr, }; static const struct of_device_id node_matches[] __initdata = { diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c index 2e448f0bbdc5..52f707d5f458 100644 --- a/drivers/cpufreq/ppc_cbe_cpufreq.c +++ b/drivers/cpufreq/ppc_cbe_cpufreq.c @@ -123,37 +123,16 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); #endif - cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu); - /* this ensures that policy->cpuinfo_min * and policy->cpuinfo_max are set correctly */ - return cpufreq_frequency_table_cpuinfo(policy, cbe_freqs); -} - -static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static int cbe_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, cbe_freqs); + return cpufreq_table_validate_and_show(policy, cbe_freqs); } static int cbe_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int cbe_pmode_new) { int rc; struct cpufreq_freqs freqs; - unsigned int cbe_pmode_new; - - cpufreq_frequency_table_target(policy, - cbe_freqs, - target_freq, - relation, - &cbe_pmode_new); freqs.old = policy->cur; freqs.new = cbe_freqs[cbe_pmode_new].frequency; @@ -176,10 +155,10 @@ static int cbe_cpufreq_target(struct cpufreq_policy *policy, } static struct cpufreq_driver cbe_cpufreq_driver = { - .verify = cbe_cpufreq_verify, - .target = cbe_cpufreq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = cbe_cpufreq_target, .init = cbe_cpufreq_cpu_init, - .exit = cbe_cpufreq_cpu_exit, + .exit = cpufreq_generic_exit, .name = "cbe-cpufreq", .flags = CPUFREQ_CONST_LOOPS, }; diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c index 8749eaf18793..183bc13f13e5 100644 --- a/drivers/cpufreq/pxa2xx-cpufreq.c +++ b/drivers/cpufreq/pxa2xx-cpufreq.c @@ -262,36 +262,16 @@ static u32 mdrefr_dri(unsigned int freq) return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32; } -/* find a valid frequency point */ -static int pxa_verify_policy(struct cpufreq_policy *policy) -{ - struct cpufreq_frequency_table *pxa_freqs_table; - pxa_freqs_t *pxa_freqs; - int ret; - - find_freq_tables(&pxa_freqs_table, &pxa_freqs); - ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table); - - if (freq_debug) - pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n", - policy->min, policy->max); - - return ret; -} - static unsigned int pxa_cpufreq_get(unsigned int cpu) { return get_clk_frequency_khz(0); } -static int pxa_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx) { struct cpufreq_frequency_table *pxa_freqs_table; pxa_freqs_t *pxa_freq_settings; struct cpufreq_freqs freqs; - unsigned int idx; unsigned long flags; unsigned int new_freq_cpu, new_freq_mem; unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg; @@ -300,12 +280,6 @@ static int pxa_set_target(struct cpufreq_policy *policy, /* Get the current policy */ find_freq_tables(&pxa_freqs_table, &pxa_freq_settings); - /* Lookup the next frequency */ - if (cpufreq_frequency_table_target(policy, pxa_freqs_table, - target_freq, relation, &idx)) { - return -EINVAL; - } - new_freq_cpu = pxa_freq_settings[idx].khz; new_freq_mem = pxa_freq_settings[idx].membus; freqs.old = policy->cur; @@ -414,8 +388,6 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) /* set default policy and cpuinfo */ policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ - policy->cur = get_clk_frequency_khz(0); /* current freq */ - policy->min = policy->max = policy->cur; /* Generate pxa25x the run cpufreq_frequency_table struct */ for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { @@ -453,10 +425,12 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) find_freq_tables(&pxa255_freq_table, &pxa255_freqs); pr_info("PXA255 cpufreq using %s frequency table\n", pxa255_turbo_table ? "turbo" : "run"); - cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table); + + cpufreq_table_validate_and_show(policy, pxa255_freq_table); + } + else if (cpu_is_pxa27x()) { + cpufreq_table_validate_and_show(policy, pxa27x_freq_table); } - else if (cpu_is_pxa27x()) - cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table); printk(KERN_INFO "PXA CPU frequency change support initialized\n"); @@ -464,9 +438,10 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) } static struct cpufreq_driver pxa_cpufreq_driver = { - .verify = pxa_verify_policy, - .target = pxa_set_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pxa_set_target, .init = pxa_cpufreq_init, + .exit = cpufreq_generic_exit, .get = pxa_cpufreq_get, .name = "PXA2xx", }; diff --git a/drivers/cpufreq/pxa3xx-cpufreq.c b/drivers/cpufreq/pxa3xx-cpufreq.c index d26306fb00d2..132e37d578c2 100644 --- a/drivers/cpufreq/pxa3xx-cpufreq.c +++ b/drivers/cpufreq/pxa3xx-cpufreq.c @@ -108,7 +108,7 @@ static int setup_freqs_table(struct cpufreq_policy *policy, pxa3xx_freqs_num = num; pxa3xx_freqs_table = table; - return cpufreq_frequency_table_cpuinfo(policy, table); + return cpufreq_table_validate_and_show(policy, table); } static void __update_core_freq(struct pxa3xx_freq_info *info) @@ -150,34 +150,21 @@ static void __update_bus_freq(struct pxa3xx_freq_info *info) cpu_relax(); } -static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table); -} - static unsigned int pxa3xx_cpufreq_get(unsigned int cpu) { return pxa3xx_get_clk_frequency_khz(0); } -static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, unsigned int index) { struct pxa3xx_freq_info *next; struct cpufreq_freqs freqs; unsigned long flags; - int idx; if (policy->cpu != 0) return -EINVAL; - /* Lookup the next frequency */ - if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table, - target_freq, relation, &idx)) - return -EINVAL; - - next = &pxa3xx_freqs[idx]; + next = &pxa3xx_freqs[index]; freqs.old = policy->cur; freqs.new = next->cpufreq_mhz * 1000; @@ -186,9 +173,6 @@ static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, freqs.old / 1000, freqs.new / 1000, (freqs.old == freqs.new) ? " (skipped)" : ""); - if (freqs.old == target_freq) - return 0; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); local_irq_save(flags); @@ -206,11 +190,10 @@ static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) int ret = -EINVAL; /* set default policy and cpuinfo */ - policy->cpuinfo.min_freq = 104000; - policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000; + policy->min = policy->cpuinfo.min_freq = 104000; + policy->max = policy->cpuinfo.max_freq = + (cpu_is_pxa320()) ? 806000 : 624000; policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ - policy->max = pxa3xx_get_clk_frequency_khz(0); - policy->cur = policy->min = policy->max; if (cpu_is_pxa300() || cpu_is_pxa310()) ret = setup_freqs_table(policy, pxa300_freqs, @@ -230,9 +213,10 @@ static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) } static struct cpufreq_driver pxa3xx_cpufreq_driver = { - .verify = pxa3xx_cpufreq_verify, - .target = pxa3xx_cpufreq_set, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pxa3xx_cpufreq_set, .init = pxa3xx_cpufreq_init, + .exit = cpufreq_generic_exit, .get = pxa3xx_cpufreq_get, .name = "pxa3xx-cpufreq", }; diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c index 22dcb81ef9d0..4188accd34ab 100644 --- a/drivers/cpufreq/s3c2416-cpufreq.c +++ b/drivers/cpufreq/s3c2416-cpufreq.c @@ -87,16 +87,6 @@ static struct cpufreq_frequency_table s3c2450_freq_table[] = { { 0, CPUFREQ_TABLE_END }, }; -static int s3c2416_cpufreq_verify_speed(struct cpufreq_policy *policy) -{ - struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; - - if (policy->cpu != 0) - return -EINVAL; - - return cpufreq_frequency_table_verify(policy, s3c_freq->freq_table); -} - static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu) { struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; @@ -227,24 +217,15 @@ static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx) } static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int index) { struct s3c2416_data *s3c_freq = &s3c2416_cpufreq; struct cpufreq_freqs freqs; int idx, ret, to_dvs = 0; - unsigned int i; mutex_lock(&cpufreq_lock); - pr_debug("cpufreq: to %dKHz, relation %d\n", target_freq, relation); - - ret = cpufreq_frequency_table_target(policy, s3c_freq->freq_table, - target_freq, relation, &i); - if (ret != 0) - goto out; - - idx = s3c_freq->freq_table[i].driver_data; + idx = s3c_freq->freq_table[index].driver_data; if (idx == SOURCE_HCLK) to_dvs = 1; @@ -266,7 +247,7 @@ static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy, */ freqs.new = (s3c_freq->is_dvs && !to_dvs) ? clk_get_rate(s3c_freq->hclk) / 1000 - : s3c_freq->freq_table[i].frequency; + : s3c_freq->freq_table[index].frequency; pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new); @@ -486,20 +467,14 @@ static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy) freq++; } - policy->cur = clk_get_rate(s3c_freq->armclk) / 1000; - /* Datasheet says PLL stabalisation time must be at least 300us, * so but add some fudge. (reference in LOCKCON0 register description) */ - policy->cpuinfo.transition_latency = (500 * 1000) + - s3c_freq->regulator_latency; - - ret = cpufreq_frequency_table_cpuinfo(policy, s3c_freq->freq_table); + ret = cpufreq_generic_init(policy, s3c_freq->freq_table, + (500 * 1000) + s3c_freq->regulator_latency); if (ret) goto err_freq_table; - cpufreq_frequency_table_get_attr(s3c_freq->freq_table, 0); - register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier); return 0; @@ -518,19 +493,14 @@ err_hclk: return ret; } -static struct freq_attr *s3c2416_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver s3c2416_cpufreq_driver = { .flags = 0, - .verify = s3c2416_cpufreq_verify_speed, - .target = s3c2416_cpufreq_set_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = s3c2416_cpufreq_set_target, .get = s3c2416_cpufreq_get_speed, .init = s3c2416_cpufreq_driver_init, .name = "s3c2416", - .attr = s3c2416_cpufreq_attr, + .attr = cpufreq_generic_attr, }; static int __init s3c2416_cpufreq_init(void) diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c index b0f343fcb7ee..485088253358 100644 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -373,23 +373,7 @@ struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) static int s3c_cpufreq_init(struct cpufreq_policy *policy) { - printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy); - - if (policy->cpu != 0) - return -EINVAL; - - policy->cur = s3c_cpufreq_get(0); - policy->min = policy->cpuinfo.min_freq = 0; - policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000; - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - /* feed the latency information from the cpu driver */ - policy->cpuinfo.transition_latency = cpu_cur.info->latency; - - if (ftab) - cpufreq_frequency_table_cpuinfo(policy, ftab); - - return 0; + return cpufreq_generic_init(policy, ftab, cpu_cur.info->latency); } static int __init s3c_cpufreq_initclks(void) @@ -416,14 +400,6 @@ static int __init s3c_cpufreq_initclks(void) return 0; } -static int s3c_cpufreq_verify(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - return 0; -} - #ifdef CONFIG_PM static struct cpufreq_frequency_table suspend_pll; static unsigned int suspend_freq; @@ -473,7 +449,6 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy) static struct cpufreq_driver s3c24xx_driver = { .flags = CPUFREQ_STICKY, - .verify = s3c_cpufreq_verify, .target = s3c_cpufreq_target, .get = s3c_cpufreq_get, .init = s3c_cpufreq_init, diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c index 15631f92ab7d..8bdcf32a4418 100644 --- a/drivers/cpufreq/s3c64xx-cpufreq.c +++ b/drivers/cpufreq/s3c64xx-cpufreq.c @@ -54,14 +54,6 @@ static struct cpufreq_frequency_table s3c64xx_freq_table[] = { }; #endif -static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table); -} - static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu) { if (cpu != 0) @@ -71,26 +63,16 @@ static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu) } static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) + unsigned int index) { int ret; - unsigned int i; struct cpufreq_freqs freqs; struct s3c64xx_dvfs *dvfs; - ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table, - target_freq, relation, &i); - if (ret != 0) - return ret; - freqs.old = clk_get_rate(armclk) / 1000; - freqs.new = s3c64xx_freq_table[i].frequency; + freqs.new = s3c64xx_freq_table[index].frequency; freqs.flags = 0; - dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].driver_data]; - - if (freqs.old == freqs.new) - return 0; + dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[index].driver_data]; pr_debug("Transition %d-%dkHz\n", freqs.old, freqs.new); @@ -243,15 +225,12 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) freq++; } - policy->cur = clk_get_rate(armclk) / 1000; - /* Datasheet says PLL stabalisation time (if we were to use * the PLLs, which we don't currently) is ~300us worst case, * but add some fudge. */ - policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency; - - ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table); + ret = cpufreq_generic_init(policy, s3c64xx_freq_table, + (500 * 1000) + regulator_latency); if (ret != 0) { pr_err("Failed to configure frequency table: %d\n", ret); @@ -264,8 +243,8 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) static struct cpufreq_driver s3c64xx_cpufreq_driver = { .flags = 0, - .verify = s3c64xx_cpufreq_verify_speed, - .target = s3c64xx_cpufreq_set_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = s3c64xx_cpufreq_set_target, .get = s3c64xx_cpufreq_get_speed, .init = s3c64xx_cpufreq_driver_init, .name = "s3c", diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c index 5c7757073793..5978b94e0340 100644 --- a/drivers/cpufreq/s5pv210-cpufreq.c +++ b/drivers/cpufreq/s5pv210-cpufreq.c @@ -36,16 +36,7 @@ static DEFINE_MUTEX(set_freq_lock); /* Use 800MHz when entering sleep mode */ #define SLEEP_FREQ (800 * 1000) -/* - * relation has an additional symantics other than the standard of cpufreq - * DISALBE_FURTHER_CPUFREQ: disable further access to target - * ENABLE_FURTUER_CPUFREQ: enable access to target - */ -enum cpufreq_access { - DISABLE_FURTHER_CPUFREQ = 0x10, - ENABLE_FURTHER_CPUFREQ = 0x20, -}; - +/* Tracks if cpu freqency can be updated anymore */ static bool no_cpufreq_access; /* @@ -174,14 +165,6 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) __raw_writel(tmp1, reg); } -static int s5pv210_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu) - return -EINVAL; - - return cpufreq_frequency_table_verify(policy, s5pv210_freq_table); -} - static unsigned int s5pv210_getspeed(unsigned int cpu) { if (cpu) @@ -190,12 +173,10 @@ static unsigned int s5pv210_getspeed(unsigned int cpu) return clk_get_rate(cpu_clk) / 1000; } -static int s5pv210_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index) { unsigned long reg; - unsigned int index, priv_index; + unsigned int priv_index; unsigned int pll_changing = 0; unsigned int bus_speed_changing = 0; int arm_volt, int_volt; @@ -203,9 +184,6 @@ static int s5pv210_target(struct cpufreq_policy *policy, mutex_lock(&set_freq_lock); - if (relation & ENABLE_FURTHER_CPUFREQ) - no_cpufreq_access = false; - if (no_cpufreq_access) { #ifdef CONFIG_PM_VERBOSE pr_err("%s:%d denied access to %s as it is disabled" @@ -215,27 +193,13 @@ static int s5pv210_target(struct cpufreq_policy *policy, goto exit; } - if (relation & DISABLE_FURTHER_CPUFREQ) - no_cpufreq_access = true; - - relation &= ~(ENABLE_FURTHER_CPUFREQ | DISABLE_FURTHER_CPUFREQ); - freqs.old = s5pv210_getspeed(0); - - if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, - target_freq, relation, &index)) { - ret = -EINVAL; - goto exit; - } - freqs.new = s5pv210_freq_table[index].frequency; - if (freqs.new == freqs.old) - goto exit; - /* Finding current running level index */ if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, - freqs.old, relation, &priv_index)) { + freqs.old, CPUFREQ_RELATION_H, + &priv_index)) { ret = -EINVAL; goto exit; } @@ -551,13 +515,7 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy) s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000); s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk); - policy->cur = policy->min = policy->max = s5pv210_getspeed(0); - - cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu); - - policy->cpuinfo.transition_latency = 40000; - - return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table); + return cpufreq_generic_init(policy, s5pv210_freq_table, 40000); out_dmc1: clk_put(dmc0_clk); @@ -573,16 +531,18 @@ static int s5pv210_cpufreq_notifier_event(struct notifier_block *this, switch (event) { case PM_SUSPEND_PREPARE: - ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, - DISABLE_FURTHER_CPUFREQ); + ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, 0); if (ret < 0) return NOTIFY_BAD; + /* Disable updation of cpu frequency */ + no_cpufreq_access = true; return NOTIFY_OK; case PM_POST_RESTORE: case PM_POST_SUSPEND: - cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, - ENABLE_FURTHER_CPUFREQ); + /* Enable updation of cpu frequency */ + no_cpufreq_access = false; + cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, 0); return NOTIFY_OK; } @@ -595,18 +555,18 @@ static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this, { int ret; - ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, - DISABLE_FURTHER_CPUFREQ); + ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, 0); if (ret < 0) return NOTIFY_BAD; + no_cpufreq_access = true; return NOTIFY_DONE; } static struct cpufreq_driver s5pv210_driver = { .flags = CPUFREQ_STICKY, - .verify = s5pv210_verify_speed, - .target = s5pv210_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = s5pv210_target, .get = s5pv210_getspeed, .init = s5pv210_cpu_init, .name = "s5pv210", diff --git a/drivers/cpufreq/sa1100-cpufreq.c b/drivers/cpufreq/sa1100-cpufreq.c index cff18e87ca58..b0da1fe40b1d 100644 --- a/drivers/cpufreq/sa1100-cpufreq.c +++ b/drivers/cpufreq/sa1100-cpufreq.c @@ -177,36 +177,20 @@ static void sa1100_update_dram_timings(int current_speed, int new_speed) } } -static int sa1100_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int sa1100_target(struct cpufreq_policy *policy, unsigned int ppcr) { unsigned int cur = sa11x0_getspeed(0); - unsigned int new_ppcr; struct cpufreq_freqs freqs; - new_ppcr = sa11x0_freq_to_ppcr(target_freq); - switch (relation) { - case CPUFREQ_RELATION_L: - if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max) - new_ppcr--; - break; - case CPUFREQ_RELATION_H: - if ((sa11x0_ppcr_to_freq(new_ppcr) > target_freq) && - (sa11x0_ppcr_to_freq(new_ppcr - 1) >= policy->min)) - new_ppcr--; - break; - } - freqs.old = cur; - freqs.new = sa11x0_ppcr_to_freq(new_ppcr); + freqs.new = sa11x0_freq_table[ppcr].frequency; cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); if (freqs.new > cur) sa1100_update_dram_timings(cur, freqs.new); - PPCR = new_ppcr; + PPCR = ppcr; if (freqs.new < cur) sa1100_update_dram_timings(cur, freqs.new); @@ -218,19 +202,13 @@ static int sa1100_target(struct cpufreq_policy *policy, static int __init sa1100_cpu_init(struct cpufreq_policy *policy) { - if (policy->cpu != 0) - return -EINVAL; - policy->cur = policy->min = policy->max = sa11x0_getspeed(0); - policy->cpuinfo.min_freq = 59000; - policy->cpuinfo.max_freq = 287000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - return 0; + return cpufreq_generic_init(policy, sa11x0_freq_table, CPUFREQ_ETERNAL); } static struct cpufreq_driver sa1100_driver __refdata = { .flags = CPUFREQ_STICKY, - .verify = sa11x0_verify_speed, - .target = sa1100_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = sa1100_target, .get = sa11x0_getspeed, .init = sa1100_cpu_init, .name = "sa1100", diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c index 39c90b6f4286..55b1818c3e49 100644 --- a/drivers/cpufreq/sa1110-cpufreq.c +++ b/drivers/cpufreq/sa1110-cpufreq.c @@ -229,34 +229,16 @@ sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram) /* * Ok, set the CPU frequency. */ -static int sa1110_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int sa1110_target(struct cpufreq_policy *policy, unsigned int ppcr) { struct sdram_params *sdram = &sdram_params; struct cpufreq_freqs freqs; struct sdram_info sd; unsigned long flags; - unsigned int ppcr, unused; - - switch (relation) { - case CPUFREQ_RELATION_L: - ppcr = sa11x0_freq_to_ppcr(target_freq); - if (sa11x0_ppcr_to_freq(ppcr) > policy->max) - ppcr--; - break; - case CPUFREQ_RELATION_H: - ppcr = sa11x0_freq_to_ppcr(target_freq); - if (ppcr && (sa11x0_ppcr_to_freq(ppcr) > target_freq) && - (sa11x0_ppcr_to_freq(ppcr-1) >= policy->min)) - ppcr--; - break; - default: - return -EINVAL; - } + unsigned int unused; freqs.old = sa11x0_getspeed(0); - freqs.new = sa11x0_ppcr_to_freq(ppcr); + freqs.new = sa11x0_freq_table[ppcr].frequency; sdram_calculate_timing(&sd, freqs.new, sdram); @@ -332,21 +314,15 @@ static int sa1110_target(struct cpufreq_policy *policy, static int __init sa1110_cpu_init(struct cpufreq_policy *policy) { - if (policy->cpu != 0) - return -EINVAL; - policy->cur = policy->min = policy->max = sa11x0_getspeed(0); - policy->cpuinfo.min_freq = 59000; - policy->cpuinfo.max_freq = 287000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - return 0; + return cpufreq_generic_init(policy, sa11x0_freq_table, CPUFREQ_ETERNAL); } /* sa1110_driver needs __refdata because it must remain after init registers * it with cpufreq_register_driver() */ static struct cpufreq_driver sa1110_driver __refdata = { .flags = CPUFREQ_STICKY, - .verify = sa11x0_verify_speed, - .target = sa1110_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = sa1110_target, .get = sa11x0_getspeed, .init = sa1110_cpu_init, .name = "sa1110", diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c index d6f6c6f4efa7..6c86452e1737 100644 --- a/drivers/cpufreq/sc520_freq.c +++ b/drivers/cpufreq/sc520_freq.c @@ -53,8 +53,7 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) } } -static void sc520_freq_set_cpu_state(struct cpufreq_policy *policy, - unsigned int state) +static int sc520_freq_target(struct cpufreq_policy *policy, unsigned int state) { struct cpufreq_freqs freqs; @@ -76,29 +75,10 @@ static void sc520_freq_set_cpu_state(struct cpufreq_policy *policy, local_irq_enable(); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); -}; - -static int sc520_freq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); -} - -static int sc520_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, sc520_freq_table, - target_freq, relation, &newstate)) - return -EINVAL; - - sc520_freq_set_cpu_state(policy, newstate); return 0; } - /* * Module init and exit code */ @@ -106,7 +86,6 @@ static int sc520_freq_target(struct cpufreq_policy *policy, static int sc520_freq_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *c = &cpu_data(0); - int result; /* capability check */ if (c->x86_vendor != X86_VENDOR_AMD || @@ -115,39 +94,19 @@ static int sc520_freq_cpu_init(struct cpufreq_policy *policy) /* cpuinfo and default policy values */ policy->cpuinfo.transition_latency = 1000000; /* 1ms */ - policy->cur = sc520_freq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); - if (result) - return result; - cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); - - return 0; -} - - -static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; + return cpufreq_table_validate_and_show(policy, sc520_freq_table); } -static struct freq_attr *sc520_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - static struct cpufreq_driver sc520_freq_driver = { .get = sc520_freq_get_cpu_frequency, - .verify = sc520_freq_verify, - .target = sc520_freq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = sc520_freq_target, .init = sc520_freq_cpu_init, - .exit = sc520_freq_cpu_exit, + .exit = cpufreq_generic_exit, .name = "sc520_freq", - .attr = sc520_freq_attr, + .attr = cpufreq_generic_attr, }; static const struct x86_cpu_id sc520_ids[] = { diff --git a/drivers/cpufreq/sh-cpufreq.c b/drivers/cpufreq/sh-cpufreq.c index ffc6d24b0cfb..387af12503a6 100644 --- a/drivers/cpufreq/sh-cpufreq.c +++ b/drivers/cpufreq/sh-cpufreq.c @@ -87,15 +87,12 @@ static int sh_cpufreq_verify(struct cpufreq_policy *policy) if (freq_table) return cpufreq_frequency_table_verify(policy, freq_table); - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); + cpufreq_verify_within_cpu_limits(policy); policy->min = (clk_round_rate(cpuclk, 1) + 500) / 1000; policy->max = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - + cpufreq_verify_within_cpu_limits(policy); return 0; } @@ -114,15 +111,13 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy) return PTR_ERR(cpuclk); } - policy->cur = sh_cpufreq_get(cpu); - freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL; if (freq_table) { int result; - result = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (!result) - cpufreq_frequency_table_get_attr(freq_table, cpu); + result = cpufreq_table_validate_and_show(policy, freq_table); + if (result) + return result; } else { dev_notice(dev, "no frequency table found, falling back " "to rate rounding.\n"); @@ -154,11 +149,6 @@ static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy) return 0; } -static struct freq_attr *sh_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver sh_cpufreq_driver = { .name = "sh", .get = sh_cpufreq_get, @@ -166,7 +156,7 @@ static struct cpufreq_driver sh_cpufreq_driver = { .verify = sh_cpufreq_verify, .init = sh_cpufreq_cpu_init, .exit = sh_cpufreq_cpu_exit, - .attr = sh_freq_attr, + .attr = cpufreq_generic_attr, }; static int __init sh_cpufreq_module_init(void) diff --git a/drivers/cpufreq/sparc-us2e-cpufreq.c b/drivers/cpufreq/sparc-us2e-cpufreq.c index cf5bc2ca16fa..3bf5b8f03661 100644 --- a/drivers/cpufreq/sparc-us2e-cpufreq.c +++ b/drivers/cpufreq/sparc-us2e-cpufreq.c @@ -245,8 +245,7 @@ static unsigned int us2e_freq_get(unsigned int cpu) return clock_tick / estar_to_divisor(estar); } -static void us2e_set_cpu_divider_index(struct cpufreq_policy *policy, - unsigned int index) +static int us2e_freq_target(struct cpufreq_policy *policy, unsigned int index) { unsigned int cpu = policy->cpu; unsigned long new_bits, new_freq; @@ -277,30 +276,10 @@ static void us2e_set_cpu_divider_index(struct cpufreq_policy *policy, cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); set_cpus_allowed_ptr(current, &cpus_allowed); -} - -static int us2e_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int new_index = 0; - - if (cpufreq_frequency_table_target(policy, - &us2e_freq_table[policy->cpu].table[0], - target_freq, relation, &new_index)) - return -EINVAL; - - us2e_set_cpu_divider_index(policy, new_index); return 0; } -static int us2e_freq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - &us2e_freq_table[policy->cpu].table[0]); -} - static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy) { unsigned int cpu = policy->cpu; @@ -324,13 +303,15 @@ static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.transition_latency = 0; policy->cur = clock_tick; - return cpufreq_frequency_table_cpuinfo(policy, table); + return cpufreq_table_validate_and_show(policy, table); } static int us2e_freq_cpu_exit(struct cpufreq_policy *policy) { - if (cpufreq_us2e_driver) - us2e_set_cpu_divider_index(policy, 0); + if (cpufreq_us2e_driver) { + cpufreq_frequency_table_put_attr(policy->cpu); + us2e_freq_target(policy, 0); + } return 0; } @@ -361,8 +342,8 @@ static int __init us2e_freq_init(void) goto err_out; driver->init = us2e_freq_cpu_init; - driver->verify = us2e_freq_verify; - driver->target = us2e_freq_target; + driver->verify = cpufreq_generic_frequency_table_verify; + driver->target_index = us2e_freq_target; driver->get = us2e_freq_get; driver->exit = us2e_freq_cpu_exit; strcpy(driver->name, "UltraSPARC-IIe"); diff --git a/drivers/cpufreq/sparc-us3-cpufreq.c b/drivers/cpufreq/sparc-us3-cpufreq.c index ac76b489979d..2e54d55915df 100644 --- a/drivers/cpufreq/sparc-us3-cpufreq.c +++ b/drivers/cpufreq/sparc-us3-cpufreq.c @@ -93,8 +93,7 @@ static unsigned int us3_freq_get(unsigned int cpu) return ret; } -static void us3_set_cpu_divider_index(struct cpufreq_policy *policy, - unsigned int index) +static int us3_freq_target(struct cpufreq_policy *policy, unsigned int index) { unsigned int cpu = policy->cpu; unsigned long new_bits, new_freq, reg; @@ -136,32 +135,10 @@ static void us3_set_cpu_divider_index(struct cpufreq_policy *policy, cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); set_cpus_allowed_ptr(current, &cpus_allowed); -} - -static int us3_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int new_index = 0; - - if (cpufreq_frequency_table_target(policy, - &us3_freq_table[policy->cpu].table[0], - target_freq, - relation, - &new_index)) - return -EINVAL; - - us3_set_cpu_divider_index(policy, new_index); return 0; } -static int us3_freq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - &us3_freq_table[policy->cpu].table[0]); -} - static int __init us3_freq_cpu_init(struct cpufreq_policy *policy) { unsigned int cpu = policy->cpu; @@ -181,13 +158,15 @@ static int __init us3_freq_cpu_init(struct cpufreq_policy *policy) policy->cpuinfo.transition_latency = 0; policy->cur = clock_tick; - return cpufreq_frequency_table_cpuinfo(policy, table); + return cpufreq_table_validate_and_show(policy, table); } static int us3_freq_cpu_exit(struct cpufreq_policy *policy) { - if (cpufreq_us3_driver) - us3_set_cpu_divider_index(policy, 0); + if (cpufreq_us3_driver) { + cpufreq_frequency_table_put_attr(policy->cpu); + us3_freq_target(policy, 0); + } return 0; } @@ -222,8 +201,8 @@ static int __init us3_freq_init(void) goto err_out; driver->init = us3_freq_cpu_init; - driver->verify = us3_freq_verify; - driver->target = us3_freq_target; + driver->verify = cpufreq_generic_frequency_table_verify; + driver->target_index = us3_freq_target; driver->get = us3_freq_get; driver->exit = us3_freq_cpu_exit; strcpy(driver->name, "UltraSPARC-III"); diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c index 3f418166ce02..11a65be3fd76 100644 --- a/drivers/cpufreq/spear-cpufreq.c +++ b/drivers/cpufreq/spear-cpufreq.c @@ -30,11 +30,6 @@ static struct { u32 cnt; } spear_cpufreq; -static int spear_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, spear_cpufreq.freq_tbl); -} - static unsigned int spear_cpufreq_get(unsigned int cpu) { return clk_get_rate(spear_cpufreq.clk) / 1000; @@ -110,20 +105,16 @@ static int spear1340_set_cpu_rate(struct clk *sys_pclk, unsigned long newfreq) } static int spear_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) + unsigned int index) { struct cpufreq_freqs freqs; long newfreq; struct clk *srcclk; - int index, ret, mult = 1; - - if (cpufreq_frequency_table_target(policy, spear_cpufreq.freq_tbl, - target_freq, relation, &index)) - return -EINVAL; + int ret, mult = 1; freqs.old = spear_cpufreq_get(0); - newfreq = spear_cpufreq.freq_tbl[index].frequency * 1000; + if (of_machine_is_compatible("st,spear1340")) { /* * SPEAr1340 is special in the sense that due to the possibility @@ -176,43 +167,19 @@ static int spear_cpufreq_target(struct cpufreq_policy *policy, static int spear_cpufreq_init(struct cpufreq_policy *policy) { - int ret; - - ret = cpufreq_frequency_table_cpuinfo(policy, spear_cpufreq.freq_tbl); - if (ret) { - pr_err("cpufreq_frequency_table_cpuinfo() failed"); - return ret; - } - - cpufreq_frequency_table_get_attr(spear_cpufreq.freq_tbl, policy->cpu); - policy->cpuinfo.transition_latency = spear_cpufreq.transition_latency; - policy->cur = spear_cpufreq_get(0); - - cpumask_setall(policy->cpus); - - return 0; -} - -static int spear_cpufreq_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; + return cpufreq_generic_init(policy, spear_cpufreq.freq_tbl, + spear_cpufreq.transition_latency); } -static struct freq_attr *spear_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver spear_cpufreq_driver = { .name = "cpufreq-spear", .flags = CPUFREQ_STICKY, - .verify = spear_cpufreq_verify, - .target = spear_cpufreq_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = spear_cpufreq_target, .get = spear_cpufreq_get, .init = spear_cpufreq_init, - .exit = spear_cpufreq_exit, - .attr = spear_cpufreq_attr, + .exit = cpufreq_generic_exit, + .attr = cpufreq_generic_attr, }; static int spear_cpufreq_driver_init(void) diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c index f897d5105842..c51ec8c0e3a8 100644 --- a/drivers/cpufreq/speedstep-centrino.c +++ b/drivers/cpufreq/speedstep-centrino.c @@ -343,9 +343,7 @@ static unsigned int get_cur_freq(unsigned int cpu) static int centrino_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu); - unsigned freq; unsigned l, h; - int ret; int i; /* Only Intel makes Enhanced Speedstep-capable CPUs */ @@ -373,9 +371,8 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) return -ENODEV; } - if (centrino_cpu_init_table(policy)) { + if (centrino_cpu_init_table(policy)) return -ENODEV; - } /* Check to see if Enhanced SpeedStep is enabled, and try to enable it if not. */ @@ -395,22 +392,11 @@ static int centrino_cpu_init(struct cpufreq_policy *policy) } } - freq = get_cur_freq(policy->cpu); policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */ - policy->cur = freq; - - pr_debug("centrino_cpu_init: cur=%dkHz\n", policy->cur); - ret = cpufreq_frequency_table_cpuinfo(policy, + return cpufreq_table_validate_and_show(policy, per_cpu(centrino_model, policy->cpu)->op_points); - if (ret) - return (ret); - - cpufreq_frequency_table_get_attr( - per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu); - - return 0; } static int centrino_cpu_exit(struct cpufreq_policy *policy) @@ -428,36 +414,19 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy) } /** - * centrino_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within this model's frequency range at least one - * border included. - */ -static int centrino_verify (struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - per_cpu(centrino_model, policy->cpu)->op_points); -} - -/** * centrino_setpolicy - set a new CPUFreq policy * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @index: index of target frequency * * Sets a new CPUFreq policy. */ -static int centrino_target (struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int centrino_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int newstate = 0; unsigned int msr, oldmsr = 0, h = 0, cpu = policy->cpu; struct cpufreq_freqs freqs; int retval = 0; unsigned int j, first_cpu, tmp; + struct cpufreq_frequency_table *op_points; cpumask_var_t covered_cpus; if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) @@ -468,16 +437,8 @@ static int centrino_target (struct cpufreq_policy *policy, goto out; } - if (unlikely(cpufreq_frequency_table_target(policy, - per_cpu(centrino_model, cpu)->op_points, - target_freq, - relation, - &newstate))) { - retval = -EINVAL; - goto out; - } - first_cpu = 1; + op_points = &per_cpu(centrino_model, cpu)->op_points[index]; for_each_cpu(j, policy->cpus) { int good_cpu; @@ -501,7 +462,7 @@ static int centrino_target (struct cpufreq_policy *policy, break; } - msr = per_cpu(centrino_model, cpu)->op_points[newstate].driver_data; + msr = op_points->driver_data; if (first_cpu) { rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); @@ -516,7 +477,8 @@ static int centrino_target (struct cpufreq_policy *policy, freqs.new = extract_clock(msr, cpu, 0); pr_debug("target=%dkHz old=%d new=%d msr=%04x\n", - target_freq, freqs.old, freqs.new, msr); + op_points->frequency, freqs.old, freqs.new, + msr); cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); @@ -561,20 +523,15 @@ out: return retval; } -static struct freq_attr* centrino_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver centrino_driver = { .name = "centrino", /* should be speedstep-centrino, but there's a 16 char limit */ .init = centrino_cpu_init, .exit = centrino_cpu_exit, - .verify = centrino_verify, - .target = centrino_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = centrino_target, .get = get_cur_freq, - .attr = centrino_attr, + .attr = cpufreq_generic_attr, }; /* diff --git a/drivers/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c index 5355abb69afc..707721ebb853 100644 --- a/drivers/cpufreq/speedstep-ich.c +++ b/drivers/cpufreq/speedstep-ich.c @@ -251,36 +251,24 @@ static unsigned int speedstep_get(unsigned int cpu) /** * speedstep_target - set a new CPUFreq policy * @policy: new policy - * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency - * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @index: index of target frequency * * Sets a new CPUFreq policy. */ -static int speedstep_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int speedstep_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int newstate = 0, policy_cpu; + unsigned int policy_cpu; struct cpufreq_freqs freqs; - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], - target_freq, relation, &newstate)) - return -EINVAL; - policy_cpu = cpumask_any_and(policy->cpus, cpu_online_mask); freqs.old = speedstep_get(policy_cpu); - freqs.new = speedstep_freqs[newstate].frequency; + freqs.new = speedstep_freqs[index].frequency; pr_debug("transiting from %u to %u kHz\n", freqs.old, freqs.new); - /* no transition necessary */ - if (freqs.old == freqs.new) - return 0; - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - smp_call_function_single(policy_cpu, _speedstep_set_state, &newstate, + smp_call_function_single(policy_cpu, _speedstep_set_state, &index, true); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); @@ -289,18 +277,6 @@ static int speedstep_target(struct cpufreq_policy *policy, } -/** - * speedstep_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within speedstep_low_freq and speedstep_high_freq, with - * at least one border included. - */ -static int speedstep_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); -} - struct get_freqs { struct cpufreq_policy *policy; int ret; @@ -320,8 +296,7 @@ static void get_freqs_on_cpu(void *_get_freqs) static int speedstep_cpu_init(struct cpufreq_policy *policy) { - int result; - unsigned int policy_cpu, speed; + unsigned int policy_cpu; struct get_freqs gf; /* only run on CPU to be set, or on its sibling */ @@ -336,49 +311,18 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) if (gf.ret) return gf.ret; - /* get current speed setting */ - speed = speedstep_get(policy_cpu); - if (!speed) - return -EIO; - - pr_debug("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) - ? "low" : "high", - (speed / 1000)); - - /* cpuinfo and default policy values */ - policy->cur = speed; - - result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); - if (result) - return result; - - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); - - return 0; + return cpufreq_table_validate_and_show(policy, speedstep_freqs); } -static int speedstep_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *speedstep_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - static struct cpufreq_driver speedstep_driver = { .name = "speedstep-ich", - .verify = speedstep_verify, - .target = speedstep_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = speedstep_target, .init = speedstep_cpu_init, - .exit = speedstep_cpu_exit, + .exit = cpufreq_generic_exit, .get = speedstep_get, - .attr = speedstep_attr, + .attr = cpufreq_generic_attr, }; static const struct x86_cpu_id ss_smi_ids[] = { diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c index abfba4f731eb..19446e479ccc 100644 --- a/drivers/cpufreq/speedstep-smi.c +++ b/drivers/cpufreq/speedstep-smi.c @@ -235,52 +235,28 @@ static void speedstep_set_state(unsigned int state) /** * speedstep_target - set a new CPUFreq policy * @policy: new policy - * @target_freq: new freq - * @relation: + * @index: index of new freq * * Sets a new CPUFreq policy/freq. */ -static int speedstep_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) +static int speedstep_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int newstate = 0; struct cpufreq_freqs freqs; - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], - target_freq, relation, &newstate)) - return -EINVAL; - freqs.old = speedstep_freqs[speedstep_get_state()].frequency; - freqs.new = speedstep_freqs[newstate].frequency; - - if (freqs.old == freqs.new) - return 0; + freqs.new = speedstep_freqs[index].frequency; cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - speedstep_set_state(newstate); + speedstep_set_state(index); cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return 0; } -/** - * speedstep_verify - verifies a new CPUFreq policy - * @policy: new policy - * - * Limit must be within speedstep_low_freq and speedstep_high_freq, with - * at least one border included. - */ -static int speedstep_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); -} - - static int speedstep_cpu_init(struct cpufreq_policy *policy) { int result; - unsigned int speed, state; unsigned int *low, *high; /* capability check */ @@ -316,32 +292,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) pr_debug("workaround worked.\n"); } - /* get current speed setting */ - state = speedstep_get_state(); - speed = speedstep_freqs[state].frequency; - - pr_debug("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) - ? "low" : "high", - (speed / 1000)); - - /* cpuinfo and default policy values */ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - policy->cur = speed; - - result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); - if (result) - return result; - - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); - - return 0; -} - -static int speedstep_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; + return cpufreq_table_validate_and_show(policy, speedstep_freqs); } static unsigned int speedstep_get(unsigned int cpu) @@ -362,20 +314,15 @@ static int speedstep_resume(struct cpufreq_policy *policy) return result; } -static struct freq_attr *speedstep_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver speedstep_driver = { .name = "speedstep-smi", - .verify = speedstep_verify, - .target = speedstep_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = speedstep_target, .init = speedstep_cpu_init, - .exit = speedstep_cpu_exit, + .exit = cpufreq_generic_exit, .get = speedstep_get, .resume = speedstep_resume, - .attr = speedstep_attr, + .attr = cpufreq_generic_attr, }; static const struct x86_cpu_id ss_smi_ids[] = { diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c index a7b876fdc1d8..bd7d89c013a5 100644 --- a/drivers/cpufreq/tegra-cpufreq.c +++ b/drivers/cpufreq/tegra-cpufreq.c @@ -51,11 +51,6 @@ static unsigned long target_cpu_speed[NUM_CPUS]; static DEFINE_MUTEX(tegra_cpu_lock); static bool is_suspended; -static int tegra_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, freq_table); -} - static unsigned int tegra_getspeed(unsigned int cpu) { unsigned long rate; @@ -155,11 +150,8 @@ static unsigned long tegra_cpu_highest_speed(void) return rate; } -static int tegra_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) +static int tegra_target(struct cpufreq_policy *policy, unsigned int index) { - unsigned int idx; unsigned int freq; int ret = 0; @@ -170,10 +162,7 @@ static int tegra_target(struct cpufreq_policy *policy, goto out; } - cpufreq_frequency_table_target(policy, freq_table, target_freq, - relation, &idx); - - freq = freq_table[idx].frequency; + freq = freq_table[index].frequency; target_cpu_speed[policy->cpu] = freq; @@ -209,21 +198,23 @@ static struct notifier_block tegra_cpu_pm_notifier = { static int tegra_cpu_init(struct cpufreq_policy *policy) { + int ret; + if (policy->cpu >= NUM_CPUS) return -EINVAL; clk_prepare_enable(emc_clk); clk_prepare_enable(cpu_clk); - cpufreq_frequency_table_cpuinfo(policy, freq_table); - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - policy->cur = tegra_getspeed(policy->cpu); - target_cpu_speed[policy->cpu] = policy->cur; + target_cpu_speed[policy->cpu] = tegra_getspeed(policy->cpu); /* FIXME: what's the actual transition time? */ - policy->cpuinfo.transition_latency = 300 * 1000; - - cpumask_copy(policy->cpus, cpu_possible_mask); + ret = cpufreq_generic_init(policy, freq_table, 300 * 1000); + if (ret) { + clk_disable_unprepare(cpu_clk); + clk_disable_unprepare(emc_clk); + return ret; + } if (policy->cpu == 0) register_pm_notifier(&tegra_cpu_pm_notifier); @@ -233,24 +224,20 @@ static int tegra_cpu_init(struct cpufreq_policy *policy) static int tegra_cpu_exit(struct cpufreq_policy *policy) { - cpufreq_frequency_table_cpuinfo(policy, freq_table); + cpufreq_frequency_table_put_attr(policy->cpu); + clk_disable_unprepare(cpu_clk); clk_disable_unprepare(emc_clk); return 0; } -static struct freq_attr *tegra_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - static struct cpufreq_driver tegra_cpufreq_driver = { - .verify = tegra_verify_speed, - .target = tegra_target, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = tegra_target, .get = tegra_getspeed, .init = tegra_cpu_init, .exit = tegra_cpu_exit, .name = "tegra", - .attr = tegra_cpufreq_attr, + .attr = cpufreq_generic_attr, }; static int __init tegra_cpufreq_init(void) diff --git a/drivers/cpufreq/unicore2-cpufreq.c b/drivers/cpufreq/unicore2-cpufreq.c index b225f04d8ae5..653ae2955b55 100644 --- a/drivers/cpufreq/unicore2-cpufreq.c +++ b/drivers/cpufreq/unicore2-cpufreq.c @@ -29,9 +29,7 @@ static int ucv2_verify_speed(struct cpufreq_policy *policy) if (policy->cpu) return -EINVAL; - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - + cpufreq_verify_within_cpu_limits(policy); return 0; } @@ -68,7 +66,6 @@ static int __init ucv2_cpu_init(struct cpufreq_policy *policy) { if (policy->cpu != 0) return -EINVAL; - policy->cur = ucv2_getspeed(0); policy->min = policy->cpuinfo.min_freq = 250000; policy->max = policy->cpuinfo.max_freq = 1000000; policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index c99c00d35d34..2e23b12c350b 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -18,7 +18,7 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/stat.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/devfreq.h> #include <linux/workqueue.h> #include <linux/platform_device.h> @@ -902,13 +902,13 @@ static ssize_t available_frequencies_show(struct device *d, { struct devfreq *df = to_devfreq(d); struct device *dev = df->dev.parent; - struct opp *opp; + struct dev_pm_opp *opp; ssize_t count = 0; unsigned long freq = 0; rcu_read_lock(); do { - opp = opp_find_freq_ceil(dev, &freq); + opp = dev_pm_opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) break; @@ -1029,25 +1029,26 @@ module_exit(devfreq_exit); * under the locked area. The pointer returned must be used prior to unlocking * with rcu_read_unlock() to maintain the integrity of the pointer. */ -struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, - u32 flags) +struct dev_pm_opp *devfreq_recommended_opp(struct device *dev, + unsigned long *freq, + u32 flags) { - struct opp *opp; + struct dev_pm_opp *opp; if (flags & DEVFREQ_FLAG_LEAST_UPPER_BOUND) { /* The freq is an upper bound. opp should be lower */ - opp = opp_find_freq_floor(dev, freq); + opp = dev_pm_opp_find_freq_floor(dev, freq); /* If not available, use the closest opp */ if (opp == ERR_PTR(-ERANGE)) - opp = opp_find_freq_ceil(dev, freq); + opp = dev_pm_opp_find_freq_ceil(dev, freq); } else { /* The freq is an lower bound. opp should be higher */ - opp = opp_find_freq_ceil(dev, freq); + opp = dev_pm_opp_find_freq_ceil(dev, freq); /* If not available, use the closest opp */ if (opp == ERR_PTR(-ERANGE)) - opp = opp_find_freq_floor(dev, freq); + opp = dev_pm_opp_find_freq_floor(dev, freq); } return opp; @@ -1066,7 +1067,7 @@ int devfreq_register_opp_notifier(struct device *dev, struct devfreq *devfreq) int ret = 0; rcu_read_lock(); - nh = opp_get_notifier(dev); + nh = dev_pm_opp_get_notifier(dev); if (IS_ERR(nh)) ret = PTR_ERR(nh); rcu_read_unlock(); @@ -1092,7 +1093,7 @@ int devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq) int ret = 0; rcu_read_lock(); - nh = opp_get_notifier(dev); + nh = dev_pm_opp_get_notifier(dev); if (IS_ERR(nh)) ret = PTR_ERR(nh); rcu_read_unlock(); diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c index c5f86d8caca3..cede6f71cd63 100644 --- a/drivers/devfreq/exynos/exynos4_bus.c +++ b/drivers/devfreq/exynos/exynos4_bus.c @@ -19,7 +19,7 @@ #include <linux/slab.h> #include <linux/mutex.h> #include <linux/suspend.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/devfreq.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> @@ -639,7 +639,7 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, struct platform_device *pdev = container_of(dev, struct platform_device, dev); struct busfreq_data *data = platform_get_drvdata(pdev); - struct opp *opp; + struct dev_pm_opp *opp; unsigned long freq; unsigned long old_freq = data->curr_oppinfo.rate; struct busfreq_opp_info new_oppinfo; @@ -650,8 +650,8 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq, rcu_read_unlock(); return PTR_ERR(opp); } - new_oppinfo.rate = opp_get_freq(opp); - new_oppinfo.volt = opp_get_voltage(opp); + new_oppinfo.rate = dev_pm_opp_get_freq(opp); + new_oppinfo.volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); freq = new_oppinfo.rate; @@ -873,7 +873,7 @@ static int exynos4210_init_tables(struct busfreq_data *data) exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i]; for (i = LV_0; i < EX4210_LV_NUM; i++) { - err = opp_add(data->dev, exynos4210_busclk_table[i].clk, + err = dev_pm_opp_add(data->dev, exynos4210_busclk_table[i].clk, exynos4210_busclk_table[i].volt); if (err) { dev_err(data->dev, "Cannot add opp entries.\n"); @@ -940,7 +940,7 @@ static int exynos4x12_init_tables(struct busfreq_data *data) } for (i = 0; i < EX4x12_LV_NUM; i++) { - ret = opp_add(data->dev, exynos4x12_mifclk_table[i].clk, + ret = dev_pm_opp_add(data->dev, exynos4x12_mifclk_table[i].clk, exynos4x12_mifclk_table[i].volt); if (ret) { dev_err(data->dev, "Fail to add opp entries.\n"); @@ -956,7 +956,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, { struct busfreq_data *data = container_of(this, struct busfreq_data, pm_notifier); - struct opp *opp; + struct dev_pm_opp *opp; struct busfreq_opp_info new_oppinfo; unsigned long maxfreq = ULONG_MAX; int err = 0; @@ -969,7 +969,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, data->disabled = true; rcu_read_lock(); - opp = opp_find_freq_floor(data->dev, &maxfreq); + opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq); if (IS_ERR(opp)) { rcu_read_unlock(); dev_err(data->dev, "%s: unable to find a min freq\n", @@ -977,8 +977,8 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this, mutex_unlock(&data->lock); return PTR_ERR(opp); } - new_oppinfo.rate = opp_get_freq(opp); - new_oppinfo.volt = opp_get_voltage(opp); + new_oppinfo.rate = dev_pm_opp_get_freq(opp); + new_oppinfo.volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); err = exynos4_bus_setvolt(data, &new_oppinfo, @@ -1020,7 +1020,7 @@ unlock: static int exynos4_busfreq_probe(struct platform_device *pdev) { struct busfreq_data *data; - struct opp *opp; + struct dev_pm_opp *opp; struct device *dev = &pdev->dev; int err = 0; @@ -1065,15 +1065,16 @@ static int exynos4_busfreq_probe(struct platform_device *pdev) } rcu_read_lock(); - opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq); + opp = dev_pm_opp_find_freq_floor(dev, + &exynos4_devfreq_profile.initial_freq); if (IS_ERR(opp)) { rcu_read_unlock(); dev_err(dev, "Invalid initial frequency %lu kHz.\n", exynos4_devfreq_profile.initial_freq); return PTR_ERR(opp); } - data->curr_oppinfo.rate = opp_get_freq(opp); - data->curr_oppinfo.volt = opp_get_voltage(opp); + data->curr_oppinfo.rate = dev_pm_opp_get_freq(opp); + data->curr_oppinfo.volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); platform_set_drvdata(pdev, data); diff --git a/drivers/devfreq/exynos/exynos5_bus.c b/drivers/devfreq/exynos/exynos5_bus.c index 93c29f4085bd..0e0bfc17cd5b 100644 --- a/drivers/devfreq/exynos/exynos5_bus.c +++ b/drivers/devfreq/exynos/exynos5_bus.c @@ -15,7 +15,7 @@ #include <linux/module.h> #include <linux/devfreq.h> #include <linux/io.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #include <linux/slab.h> #include <linux/suspend.h> #include <linux/clk.h> @@ -131,7 +131,7 @@ static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq, struct platform_device *pdev = container_of(dev, struct platform_device, dev); struct busfreq_data_int *data = platform_get_drvdata(pdev); - struct opp *opp; + struct dev_pm_opp *opp; unsigned long old_freq, freq; unsigned long volt; @@ -143,8 +143,8 @@ static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq, return PTR_ERR(opp); } - freq = opp_get_freq(opp); - volt = opp_get_voltage(opp); + freq = dev_pm_opp_get_freq(opp); + volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); old_freq = data->curr_freq; @@ -245,7 +245,7 @@ static int exynos5250_init_int_tables(struct busfreq_data_int *data) int i, err = 0; for (i = LV_0; i < _LV_END; i++) { - err = opp_add(data->dev, exynos5_int_opp_table[i].clk, + err = dev_pm_opp_add(data->dev, exynos5_int_opp_table[i].clk, exynos5_int_opp_table[i].volt); if (err) { dev_err(data->dev, "Cannot add opp entries.\n"); @@ -261,7 +261,7 @@ static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this, { struct busfreq_data_int *data = container_of(this, struct busfreq_data_int, pm_notifier); - struct opp *opp; + struct dev_pm_opp *opp; unsigned long maxfreq = ULONG_MAX; unsigned long freq; unsigned long volt; @@ -275,14 +275,14 @@ static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this, data->disabled = true; rcu_read_lock(); - opp = opp_find_freq_floor(data->dev, &maxfreq); + opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq); if (IS_ERR(opp)) { rcu_read_unlock(); err = PTR_ERR(opp); goto unlock; } - freq = opp_get_freq(opp); - volt = opp_get_voltage(opp); + freq = dev_pm_opp_get_freq(opp); + volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); err = exynos5_int_setvolt(data, volt); @@ -315,7 +315,7 @@ unlock: static int exynos5_busfreq_int_probe(struct platform_device *pdev) { struct busfreq_data_int *data; - struct opp *opp; + struct dev_pm_opp *opp; struct device *dev = &pdev->dev; struct device_node *np; unsigned long initial_freq; @@ -367,7 +367,7 @@ static int exynos5_busfreq_int_probe(struct platform_device *pdev) } rcu_read_lock(); - opp = opp_find_freq_floor(dev, + opp = dev_pm_opp_find_freq_floor(dev, &exynos5_devfreq_int_profile.initial_freq); if (IS_ERR(opp)) { rcu_read_unlock(); @@ -376,8 +376,8 @@ static int exynos5_busfreq_int_probe(struct platform_device *pdev) err = PTR_ERR(opp); goto err_opp_add; } - initial_freq = opp_get_freq(opp); - initial_volt = opp_get_voltage(opp); + initial_freq = dev_pm_opp_get_freq(opp); + initial_volt = dev_pm_opp_get_voltage(opp); rcu_read_unlock(); data->curr_freq = initial_freq; diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index dbfc390330ac..5ef596765060 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -78,7 +78,6 @@ config THERMAL_GOV_USER_SPACE config CPU_THERMAL bool "generic cpu cooling support" depends on CPU_FREQ - select CPU_FREQ_TABLE help This implements the generic cpu cooling mechanism through frequency reduction. An ACPI version of this already exists diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index fcabc42d66ab..93a8c34d6c7f 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -85,6 +85,20 @@ struct cpufreq_policy { struct list_head policy_list; struct kobject kobj; struct completion kobj_unregister; + + /* + * The rules for this semaphore: + * - Any routine that wants to read from the policy structure will + * do a down_read on this semaphore. + * - Any routine that will write to the policy structure and/or may take away + * the policy altogether (eg. CPU hotplug), will hold this lock in write + * mode before doing so. + * + * Additional rules: + * - Lock should not be held across + * __cpufreq_governor(data, CPUFREQ_GOV_POLICY_EXIT); + */ + struct rw_semaphore rwsem; }; /* Only for ACPI */ @@ -180,13 +194,6 @@ __ATTR(_name, 0644, show_##_name, store_##_name) struct cpufreq_driver { char name[CPUFREQ_NAME_LEN]; u8 flags; - /* - * This should be set by platforms having multiple clock-domains, i.e. - * supporting multiple policies. With this sysfs directories of governor - * would be created in cpu/cpu<num>/cpufreq/ directory and so they can - * use the same governor with different tunables for different clusters. - */ - bool have_governor_per_policy; /* needed by all drivers */ int (*init) (struct cpufreq_policy *policy); @@ -194,9 +201,11 @@ struct cpufreq_driver { /* define one out of two */ int (*setpolicy) (struct cpufreq_policy *policy); - int (*target) (struct cpufreq_policy *policy, + int (*target) (struct cpufreq_policy *policy, /* Deprecated */ unsigned int target_freq, unsigned int relation); + int (*target_index) (struct cpufreq_policy *policy, + unsigned int index); /* should be defined, if possible */ unsigned int (*get) (unsigned int cpu); @@ -211,13 +220,22 @@ struct cpufreq_driver { }; /* flags */ -#define CPUFREQ_STICKY 0x01 /* the driver isn't removed even if - * all ->init() calls failed */ -#define CPUFREQ_CONST_LOOPS 0x02 /* loops_per_jiffy or other kernel - * "constants" aren't affected by - * frequency transitions */ -#define CPUFREQ_PM_NO_WARN 0x04 /* don't warn on suspend/resume speed - * mismatches */ +#define CPUFREQ_STICKY (1 << 0) /* driver isn't removed even if + all ->init() calls failed */ +#define CPUFREQ_CONST_LOOPS (1 << 1) /* loops_per_jiffy or other + kernel "constants" aren't + affected by frequency + transitions */ +#define CPUFREQ_PM_NO_WARN (1 << 2) /* don't warn on suspend/resume + speed mismatches */ + +/* + * This should be set by platforms having multiple clock-domains, i.e. + * supporting multiple policies. With this sysfs directories of governor would + * be created in cpu/cpu<num>/cpufreq/ directory and so they can use the same + * governor with different tunables for different clusters. + */ +#define CPUFREQ_HAVE_GOVERNOR_PER_POLICY (1 << 3) int cpufreq_register_driver(struct cpufreq_driver *driver_data); int cpufreq_unregister_driver(struct cpufreq_driver *driver_data); @@ -240,6 +258,13 @@ static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy, return; } +static inline void +cpufreq_verify_within_cpu_limits(struct cpufreq_policy *policy) +{ + cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, + policy->cpuinfo.max_freq); +} + /********************************************************************* * CPUFREQ NOTIFIER INTERFACE * *********************************************************************/ @@ -392,6 +417,7 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy, int cpufreq_frequency_table_verify(struct cpufreq_policy *policy, struct cpufreq_frequency_table *table); +int cpufreq_generic_frequency_table_verify(struct cpufreq_policy *policy); int cpufreq_frequency_table_target(struct cpufreq_policy *policy, struct cpufreq_frequency_table *table, @@ -407,8 +433,20 @@ struct cpufreq_frequency_table *cpufreq_frequency_get_table(unsigned int cpu); /* the following are really really optional */ extern struct freq_attr cpufreq_freq_attr_scaling_available_freqs; +extern struct freq_attr *cpufreq_generic_attr[]; void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table, unsigned int cpu); void cpufreq_frequency_table_put_attr(unsigned int cpu); +int cpufreq_table_validate_and_show(struct cpufreq_policy *policy, + struct cpufreq_frequency_table *table); + +int cpufreq_generic_init(struct cpufreq_policy *policy, + struct cpufreq_frequency_table *table, + unsigned int transition_latency); +static inline int cpufreq_generic_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} #endif /* _LINUX_CPUFREQ_H */ diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index 5f1ab92107e6..7a7cc74d7f27 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -15,7 +15,7 @@ #include <linux/device.h> #include <linux/notifier.h> -#include <linux/opp.h> +#include <linux/pm_opp.h> #define DEVFREQ_NAME_LEN 16 @@ -187,7 +187,7 @@ extern int devfreq_suspend_device(struct devfreq *devfreq); extern int devfreq_resume_device(struct devfreq *devfreq); /* Helper functions for devfreq user device driver with OPP. */ -extern struct opp *devfreq_recommended_opp(struct device *dev, +extern struct dev_pm_opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags); extern int devfreq_register_opp_notifier(struct device *dev, struct devfreq *devfreq); @@ -238,7 +238,7 @@ static inline int devfreq_resume_device(struct devfreq *devfreq) return 0; } -static inline struct opp *devfreq_recommended_opp(struct device *dev, +static inline struct dev_pm_opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags) { return ERR_PTR(-EINVAL); diff --git a/include/linux/opp.h b/include/linux/opp.h deleted file mode 100644 index 3aca2b8def33..000000000000 --- a/include/linux/opp.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * Generic OPP Interface - * - * Copyright (C) 2009-2010 Texas Instruments Incorporated. - * Nishanth Menon - * Romit Dasgupta - * Kevin Hilman - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __LINUX_OPP_H__ -#define __LINUX_OPP_H__ - -#include <linux/err.h> -#include <linux/cpufreq.h> -#include <linux/notifier.h> - -struct opp; -struct device; - -enum opp_event { - OPP_EVENT_ADD, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE, -}; - -#if defined(CONFIG_PM_OPP) - -unsigned long opp_get_voltage(struct opp *opp); - -unsigned long opp_get_freq(struct opp *opp); - -int opp_get_opp_count(struct device *dev); - -struct opp *opp_find_freq_exact(struct device *dev, unsigned long freq, - bool available); - -struct opp *opp_find_freq_floor(struct device *dev, unsigned long *freq); - -struct opp *opp_find_freq_ceil(struct device *dev, unsigned long *freq); - -int opp_add(struct device *dev, unsigned long freq, unsigned long u_volt); - -int opp_enable(struct device *dev, unsigned long freq); - -int opp_disable(struct device *dev, unsigned long freq); - -struct srcu_notifier_head *opp_get_notifier(struct device *dev); -#else -static inline unsigned long opp_get_voltage(struct opp *opp) -{ - return 0; -} - -static inline unsigned long opp_get_freq(struct opp *opp) -{ - return 0; -} - -static inline int opp_get_opp_count(struct device *dev) -{ - return 0; -} - -static inline struct opp *opp_find_freq_exact(struct device *dev, - unsigned long freq, bool available) -{ - return ERR_PTR(-EINVAL); -} - -static inline struct opp *opp_find_freq_floor(struct device *dev, - unsigned long *freq) -{ - return ERR_PTR(-EINVAL); -} - -static inline struct opp *opp_find_freq_ceil(struct device *dev, - unsigned long *freq) -{ - return ERR_PTR(-EINVAL); -} - -static inline int opp_add(struct device *dev, unsigned long freq, - unsigned long u_volt) -{ - return -EINVAL; -} - -static inline int opp_enable(struct device *dev, unsigned long freq) -{ - return 0; -} - -static inline int opp_disable(struct device *dev, unsigned long freq) -{ - return 0; -} - -static inline struct srcu_notifier_head *opp_get_notifier(struct device *dev) -{ - return ERR_PTR(-EINVAL); -} -#endif /* CONFIG_PM_OPP */ - -#if defined(CONFIG_PM_OPP) && defined(CONFIG_OF) -int of_init_opp_table(struct device *dev); -#else -static inline int of_init_opp_table(struct device *dev) -{ - return -EINVAL; -} -#endif - -#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP) -int opp_init_cpufreq_table(struct device *dev, - struct cpufreq_frequency_table **table); -void opp_free_cpufreq_table(struct device *dev, - struct cpufreq_frequency_table **table); -#else -static inline int opp_init_cpufreq_table(struct device *dev, - struct cpufreq_frequency_table **table) -{ - return -EINVAL; -} - -static inline -void opp_free_cpufreq_table(struct device *dev, - struct cpufreq_frequency_table **table) -{ -} -#endif /* CONFIG_CPU_FREQ */ - -#endif /* __LINUX_OPP_H__ */ diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h new file mode 100644 index 000000000000..5151b0059585 --- /dev/null +++ b/include/linux/pm_opp.h @@ -0,0 +1,139 @@ +/* + * Generic OPP Interface + * + * Copyright (C) 2009-2010 Texas Instruments Incorporated. + * Nishanth Menon + * Romit Dasgupta + * Kevin Hilman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_OPP_H__ +#define __LINUX_OPP_H__ + +#include <linux/err.h> +#include <linux/cpufreq.h> +#include <linux/notifier.h> + +struct dev_pm_opp; +struct device; + +enum dev_pm_opp_event { + OPP_EVENT_ADD, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE, +}; + +#if defined(CONFIG_PM_OPP) + +unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp); + +unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp); + +int dev_pm_opp_get_opp_count(struct device *dev); + +struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, + unsigned long freq, + bool available); + +struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, + unsigned long *freq); + +struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev, + unsigned long *freq); + +int dev_pm_opp_add(struct device *dev, unsigned long freq, + unsigned long u_volt); + +int dev_pm_opp_enable(struct device *dev, unsigned long freq); + +int dev_pm_opp_disable(struct device *dev, unsigned long freq); + +struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev); +#else +static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp) +{ + return 0; +} + +static inline unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp) +{ + return 0; +} + +static inline int dev_pm_opp_get_opp_count(struct device *dev) +{ + return 0; +} + +static inline struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev, + unsigned long freq, bool available) +{ + return ERR_PTR(-EINVAL); +} + +static inline struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, + unsigned long *freq) +{ + return ERR_PTR(-EINVAL); +} + +static inline struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev, + unsigned long *freq) +{ + return ERR_PTR(-EINVAL); +} + +static inline int dev_pm_opp_add(struct device *dev, unsigned long freq, + unsigned long u_volt) +{ + return -EINVAL; +} + +static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq) +{ + return 0; +} + +static inline int dev_pm_opp_disable(struct device *dev, unsigned long freq) +{ + return 0; +} + +static inline struct srcu_notifier_head *dev_pm_opp_get_notifier( + struct device *dev) +{ + return ERR_PTR(-EINVAL); +} +#endif /* CONFIG_PM_OPP */ + +#if defined(CONFIG_PM_OPP) && defined(CONFIG_OF) +int of_init_opp_table(struct device *dev); +#else +static inline int of_init_opp_table(struct device *dev) +{ + return -EINVAL; +} +#endif + +#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP) +int dev_pm_opp_init_cpufreq_table(struct device *dev, + struct cpufreq_frequency_table **table); +void dev_pm_opp_free_cpufreq_table(struct device *dev, + struct cpufreq_frequency_table **table); +#else +static inline int dev_pm_opp_init_cpufreq_table(struct device *dev, + struct cpufreq_frequency_table **table) +{ + return -EINVAL; +} + +static inline +void dev_pm_opp_free_cpufreq_table(struct device *dev, + struct cpufreq_frequency_table **table) +{ +} +#endif /* CONFIG_CPU_FREQ */ + +#endif /* __LINUX_OPP_H__ */ |