diff options
| -rw-r--r-- | drivers/input/misc/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/input/misc/mma8450.c | 101 |
2 files changed, 46 insertions, 56 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index b108c992bb7a..e1309cb190e1 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -246,7 +246,6 @@ config INPUT_MC13783_PWRBUTTON config INPUT_MMA8450 tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer" depends on I2C - select INPUT_POLLDEV help Say Y here if you want to support Freescale's MMA8450 Accelerometer through I2C interface. diff --git a/drivers/input/misc/mma8450.c b/drivers/input/misc/mma8450.c index 49f5242bc54c..1b5a5e19230a 100644 --- a/drivers/input/misc/mma8450.c +++ b/drivers/input/misc/mma8450.c @@ -10,7 +10,7 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/i2c.h> -#include <linux/input-polldev.h> +#include <linux/input.h> #include <linux/of_device.h> #define MMA8450_DRV_NAME "mma8450" @@ -39,15 +39,8 @@ #define MMA8450_CTRL_REG1 0x38 #define MMA8450_CTRL_REG2 0x39 -/* mma8450 status */ -struct mma8450 { - struct i2c_client *client; - struct input_polled_dev *idev; -}; - -static int mma8450_read(struct mma8450 *m, unsigned off) +static int mma8450_read(struct i2c_client *c, unsigned int off) { - struct i2c_client *c = m->client; int ret; ret = i2c_smbus_read_byte_data(c, off); @@ -59,9 +52,8 @@ static int mma8450_read(struct mma8450 *m, unsigned off) return ret; } -static int mma8450_write(struct mma8450 *m, unsigned off, u8 v) +static int mma8450_write(struct i2c_client *c, unsigned int off, u8 v) { - struct i2c_client *c = m->client; int error; error = i2c_smbus_write_byte_data(c, off, v); @@ -75,10 +67,9 @@ static int mma8450_write(struct mma8450 *m, unsigned off, u8 v) return 0; } -static int mma8450_read_block(struct mma8450 *m, unsigned off, +static int mma8450_read_block(struct i2c_client *c, unsigned int off, u8 *buf, size_t size) { - struct i2c_client *c = m->client; int err; err = i2c_smbus_read_i2c_block_data(c, off, size, buf); @@ -92,21 +83,21 @@ static int mma8450_read_block(struct mma8450 *m, unsigned off, return 0; } -static void mma8450_poll(struct input_polled_dev *dev) +static void mma8450_poll(struct input_dev *input) { - struct mma8450 *m = dev->private; + struct i2c_client *c = input_get_drvdata(input); int x, y, z; int ret; u8 buf[6]; - ret = mma8450_read(m, MMA8450_STATUS); + ret = mma8450_read(c, MMA8450_STATUS); if (ret < 0) return; if (!(ret & MMA8450_STATUS_ZXYDR)) return; - ret = mma8450_read_block(m, MMA8450_OUT_X_LSB, buf, sizeof(buf)); + ret = mma8450_read_block(c, MMA8450_OUT_X_LSB, buf, sizeof(buf)); if (ret < 0) return; @@ -114,41 +105,42 @@ static void mma8450_poll(struct input_polled_dev *dev) y = ((int)(s8)buf[3] << 4) | (buf[2] & 0xf); z = ((int)(s8)buf[5] << 4) | (buf[4] & 0xf); - input_report_abs(dev->input, ABS_X, x); - input_report_abs(dev->input, ABS_Y, y); - input_report_abs(dev->input, ABS_Z, z); - input_sync(dev->input); + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + input_report_abs(input, ABS_Z, z); + input_sync(input); } /* Initialize the MMA8450 chip */ -static void mma8450_open(struct input_polled_dev *dev) +static int mma8450_open(struct input_dev *input) { - struct mma8450 *m = dev->private; + struct i2c_client *c = input_get_drvdata(input); int err; /* enable all events from X/Y/Z, no FIFO */ - err = mma8450_write(m, MMA8450_XYZ_DATA_CFG, 0x07); + err = mma8450_write(c, MMA8450_XYZ_DATA_CFG, 0x07); if (err) - return; + return err; /* * Sleep mode poll rate - 50Hz * System output data rate - 400Hz * Full scale selection - Active, +/- 2G */ - err = mma8450_write(m, MMA8450_CTRL_REG1, 0x01); - if (err < 0) - return; + err = mma8450_write(c, MMA8450_CTRL_REG1, 0x01); + if (err) + return err; msleep(MODE_CHANGE_DELAY_MS); + return 0; } -static void mma8450_close(struct input_polled_dev *dev) +static void mma8450_close(struct input_dev *input) { - struct mma8450 *m = dev->private; + struct i2c_client *c = input_get_drvdata(input); - mma8450_write(m, MMA8450_CTRL_REG1, 0x00); - mma8450_write(m, MMA8450_CTRL_REG2, 0x01); + mma8450_write(c, MMA8450_CTRL_REG1, 0x00); + mma8450_write(c, MMA8450_CTRL_REG2, 0x01); } /* @@ -157,38 +149,37 @@ static void mma8450_close(struct input_polled_dev *dev) static int mma8450_probe(struct i2c_client *c, const struct i2c_device_id *id) { - struct input_polled_dev *idev; - struct mma8450 *m; + struct input_dev *input; int err; - m = devm_kzalloc(&c->dev, sizeof(*m), GFP_KERNEL); - if (!m) + input = devm_input_allocate_device(&c->dev); + if (!input) return -ENOMEM; - idev = devm_input_allocate_polled_device(&c->dev); - if (!idev) - return -ENOMEM; + input_set_drvdata(input, c); + + input->name = MMA8450_DRV_NAME; + input->id.bustype = BUS_I2C; + + input->open = mma8450_open; + input->close = mma8450_close; - m->client = c; - m->idev = idev; + input_set_abs_params(input, ABS_X, -2048, 2047, 32, 32); + input_set_abs_params(input, ABS_Y, -2048, 2047, 32, 32); + input_set_abs_params(input, ABS_Z, -2048, 2047, 32, 32); - idev->private = m; - idev->input->name = MMA8450_DRV_NAME; - idev->input->id.bustype = BUS_I2C; - idev->poll = mma8450_poll; - idev->poll_interval = POLL_INTERVAL; - idev->poll_interval_max = POLL_INTERVAL_MAX; - idev->open = mma8450_open; - idev->close = mma8450_close; + err = input_setup_polling(input, mma8450_poll); + if (err) { + dev_err(&c->dev, "failed to set up polling\n"); + return err; + } - __set_bit(EV_ABS, idev->input->evbit); - input_set_abs_params(idev->input, ABS_X, -2048, 2047, 32, 32); - input_set_abs_params(idev->input, ABS_Y, -2048, 2047, 32, 32); - input_set_abs_params(idev->input, ABS_Z, -2048, 2047, 32, 32); + input_set_poll_interval(input, POLL_INTERVAL); + input_set_max_poll_interval(input, POLL_INTERVAL_MAX); - err = input_register_polled_device(idev); + err = input_register_device(input); if (err) { - dev_err(&c->dev, "failed to register polled input device\n"); + dev_err(&c->dev, "failed to register input device\n"); return err; } |