Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Remove socket skb caches

   - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
     avoid memory accounting overhead on each message sent

   - Introduce managed neighbor entries - added by control plane and
     resolved by the kernel for use in acceleration paths (BPF / XDP
     right now, HW offload users will benefit as well)

   - Make neighbor eviction on link down controllable by userspace to
     work around WiFi networks with bad roaming implementations

   - vrf: Rework interaction with netfilter/conntrack

   - fq_codel: implement L4S style ce_threshold_ect1 marking

   - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()

  BPF:

   - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
     as implemented in LLVM14

   - Introduce bpf_get_branch_snapshot() to capture Last Branch Records

   - Implement variadic trace_printk helper

   - Add a new Bloomfilter map type

   - Track <8-byte scalar spill and refill

   - Access hw timestamp through BPF's __sk_buff

   - Disallow unprivileged BPF by default

   - Document BPF licensing

  Netfilter:

   - Introduce egress hook for looking at raw outgoing packets

   - Allow matching on and modifying inner headers / payload data

   - Add NFT_META_IFTYPE to match on the interface type either from
     ingress or egress

  Protocols:

   - Multi-Path TCP:
      - increase default max additional subflows to 2
      - rework forward memory allocation
      - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS

   - MCTP flow support allowing lower layer drivers to configure msg
     muxing as needed

   - Automatic Multicast Tunneling (AMT) driver based on RFC7450

   - HSR support the redbox supervision frames (IEC-62439-3:2018)

   - Support for the ip6ip6 encapsulation of IOAM

   - Netlink interface for CAN-FD's Transmitter Delay Compensation

   - Support SMC-Rv2 eliminating the current same-subnet restriction, by
     exploiting the UDP encapsulation feature of RoCE adapters

   - TLS: add SM4 GCM/CCM crypto support

   - Bluetooth: initial support for link quality and audio/codec offload

  Driver APIs:

   - Add a batched interface for RX buffer allocation in AF_XDP buffer
     pool

   - ethtool: Add ability to control transceiver modules' power mode

   - phy: Introduce supported interfaces bitmap to express MAC
     capabilities and simplify PHY code

   - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks

  New drivers:

   - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)

   - Ethernet driver for ASIX AX88796C SPI device (x88796c)

  Drivers:

   - Broadcom PHYs
      - support 72165, 7712 16nm PHYs
      - support IDDQ-SR for additional power savings

   - PHY support for QCA8081, QCA9561 PHYs

   - NXP DPAA2: support for IRQ coalescing

   - NXP Ethernet (enetc): support for software TCP segmentation

   - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
     Gigabit-capable IP found on RZ/G2L SoC

   - Intel 100G Ethernet
      - support for eswitch offload of TC/OvS flow API, including
        offload of GRE, VxLAN, Geneve tunneling
      - support application device queues - ability to assign Rx and Tx
        queues to application threads
      - PTP and PPS (pulse-per-second) extensions

   - Broadcom Ethernet (bnxt)
      - devlink health reporting and device reload extensions

   - Mellanox Ethernet (mlx5)
      - offload macvlan interfaces
      - support HW offload of TC rules involving OVS internal ports
      - support HW-GRO and header/data split
      - support application device queues

   - Marvell OcteonTx2:
      - add XDP support for PF
      - add PTP support for VF

   - Qualcomm Ethernet switch (qca8k): support for QCA8328

   - Realtek Ethernet DSA switch (rtl8366rb)
      - support bridge offload
      - support STP, fast aging, disabling address learning
      - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch

   - Mellanox Ethernet/IB switch (mlxsw)
      - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
      - offload root TBF qdisc as port shaper
      - support multiple routing interface MAC address prefixes
      - support for IP-in-IP with IPv6 underlay

   - MediaTek WiFi (mt76)
      - mt7921 - ASPM, 6GHz, SDIO and testmode support
      - mt7915 - LED and TWT support

   - Qualcomm WiFi (ath11k)
      - include channel rx and tx time in survey dump statistics
      - support for 80P80 and 160 MHz bandwidths
      - support channel 2 in 6 GHz band
      - spectral scan support for QCN9074
      - support for rx decapsulation offload (data frames in 802.3
        format)

   - Qualcomm phone SoC WiFi (wcn36xx)
      - enable Idle Mode Power Save (IMPS) to reduce power consumption
        during idle

   - Bluetooth driver support for MediaTek MT7922 and MT7921

   - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
     Realtek 8822C/8852A

   - Microsoft vNIC driver (mana)
      - support hibernation and kexec

   - Google vNIC driver (gve)
      - support for jumbo frames
      - implement Rx page reuse

  Refactor:

   - Make all writes to netdev->dev_addr go thru helpers, so that we can
     add this address to the address rbtree and handle the updates

   - Various TCP cleanups and optimizations including improvements to
     CPU cache use

   - Simplify the gnet_stats, Qdisc stats' handling and remove
     qdisc->running sequence counter

   - Driver changes and API updates to address devlink locking
     deficiencies"

* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
  Revert "net: avoid double accounting for pure zerocopy skbs"
  selftests: net: add arp_ndisc_evict_nocarrier
  net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
  net: arp: introduce arp_evict_nocarrier sysctl parameter
  libbpf: Deprecate AF_XDP support
  kbuild: Unify options for BTF generation for vmlinux and modules
  selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
  bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
  bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
  net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
  net: avoid double accounting for pure zerocopy skbs
  tcp: rename sk_wmem_free_skb
  netdevsim: fix uninit value in nsim_drv_configure_vfs()
  selftests/bpf: Fix also no-alu32 strobemeta selftest
  bpf: Add missing map_delete_elem method to bloom filter map
  selftests/bpf: Add bloom map success test for userspace calls
  bpf: Add alignment padding for "map_extra" + consolidate holes
  bpf: Bloom filter map naming fixups
  selftests/bpf: Add test cases for struct_ops prog
  bpf: Add dummy BPF STRUCT_OPS for test purpose
  ...

2 files changed, 108 insertions, 23 deletions

diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 791f31dd0abe..ba5af15e25f5 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -906,6 +906,7 @@ enum bpf_map_type {
 	BPF_MAP_TYPE_RINGBUF,
 	BPF_MAP_TYPE_INODE_STORAGE,
 	BPF_MAP_TYPE_TASK_STORAGE,
+	BPF_MAP_TYPE_BLOOM_FILTER,
 };
 
 /* Note that tracing related programs such as
@@ -1274,6 +1275,13 @@ union bpf_attr {
 						   * struct stored as the
 						   * map value
 						   */
+		/* Any per-map-type extra fields
+		 *
+		 * BPF_MAP_TYPE_BLOOM_FILTER - the lowest 4 bits indicate the
+		 * number of hash functions (if 0, the bloom filter will default
+		 * to using 5 hash functions).
+		 */
+		__u64	map_extra;
 	};
 
 	struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
@@ -1629,7 +1637,7 @@ union bpf_attr {
  * u32 bpf_get_smp_processor_id(void)
  * 	Description
  * 		Get the SMP (symmetric multiprocessing) processor id. Note that
- * 		all programs run with preemption disabled, which means that the
+ * 		all programs run with migration disabled, which means that the
  * 		SMP processor id is stable during all the execution of the
  * 		program.
  * 	Return
@@ -4046,7 +4054,7 @@ union bpf_attr {
  * 		arguments. The *data* are a **u64** array and corresponding format string
  * 		values are stored in the array. For strings and pointers where pointees
  * 		are accessed, only the pointer values are stored in the *data* array.
- * 		The *data_len* is the size of *data* in bytes.
+ * 		The *data_len* is the size of *data* in bytes - must be a multiple of 8.
  *
  *		Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory.
  *		Reading kernel memory may fail due to either invalid address or
@@ -4751,7 +4759,8 @@ union bpf_attr {
  *		Each format specifier in **fmt** corresponds to one u64 element
  *		in the **data** array. For strings and pointers where pointees
  *		are accessed, only the pointer values are stored in the *data*
- *		array. The *data_len* is the size of *data* in bytes.
+ *		array. The *data_len* is the size of *data* in bytes - must be
+ *		a multiple of 8.
  *
  *		Formats **%s** and **%p{i,I}{4,6}** require to read kernel
  *		memory. Reading kernel memory may fail due to either invalid
@@ -4877,6 +4886,58 @@ union bpf_attr {
  *		Get the struct pt_regs associated with **task**.
  *	Return
  *		A pointer to struct pt_regs.
+ *
+ * long bpf_get_branch_snapshot(void *entries, u32 size, u64 flags)
+ *	Description
+ *		Get branch trace from hardware engines like Intel LBR. The
+ *		hardware engine is stopped shortly after the helper is
+ *		called. Therefore, the user need to filter branch entries
+ *		based on the actual use case. To capture branch trace
+ *		before the trigger point of the BPF program, the helper
+ *		should be called at the beginning of the BPF program.
+ *
+ *		The data is stored as struct perf_branch_entry into output
+ *		buffer *entries*. *size* is the size of *entries* in bytes.
+ *		*flags* is reserved for now and must be zero.
+ *
+ *	Return
+ *		On success, number of bytes written to *buf*. On error, a
+ *		negative value.
+ *
+ *		**-EINVAL** if *flags* is not zero.
+ *
+ *		**-ENOENT** if architecture does not support branch records.
+ *
+ * long bpf_trace_vprintk(const char *fmt, u32 fmt_size, const void *data, u32 data_len)
+ *	Description
+ *		Behaves like **bpf_trace_printk**\ () helper, but takes an array of u64
+ *		to format and can handle more format args as a result.
+ *
+ *		Arguments are to be used as in **bpf_seq_printf**\ () helper.
+ *	Return
+ *		The number of bytes written to the buffer, or a negative error
+ *		in case of failure.
+ *
+ * struct unix_sock *bpf_skc_to_unix_sock(void *sk)
+ * 	Description
+ *		Dynamically cast a *sk* pointer to a *unix_sock* pointer.
+ *	Return
+ *		*sk* if casting is valid, or **NULL** otherwise.
+ *
+ * long bpf_kallsyms_lookup_name(const char *name, int name_sz, int flags, u64 *res)
+ *	Description
+ *		Get the address of a kernel symbol, returned in *res*. *res* is
+ *		set to 0 if the symbol is not found.
+ *	Return
+ *		On success, zero. On error, a negative value.
+ *
+ *		**-EINVAL** if *flags* is not zero.
+ *
+ *		**-EINVAL** if string *name* is not the same size as *name_sz*.
+ *
+ *		**-ENOENT** if symbol is not found.
+ *
+ *		**-EPERM** if caller does not have permission to obtain kernel address.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -5055,6 +5116,10 @@ union bpf_attr {
 	FN(get_func_ip),		\
 	FN(get_attach_cookie),		\
 	FN(task_pt_regs),		\
+	FN(get_branch_snapshot),	\
+	FN(trace_vprintk),		\
+	FN(skc_to_unix_sock),		\
+	FN(kallsyms_lookup_name),	\
 	/* */
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
@@ -5284,6 +5349,8 @@ struct __sk_buff {
 	__u32 gso_segs;
 	__bpf_md_ptr(struct bpf_sock *, sk);
 	__u32 gso_size;
+	__u32 :32;		/* Padding, future use. */
+	__u64 hwtstamp;
 };
 
 struct bpf_tunnel_key {
@@ -5577,6 +5644,7 @@ struct bpf_prog_info {
 	__u64 run_time_ns;
 	__u64 run_cnt;
 	__u64 recursion_misses;
+	__u32 verified_insns;
 } __attribute__((aligned(8)));
 
 struct bpf_map_info {
@@ -5594,6 +5662,8 @@ struct bpf_map_info {
 	__u32 btf_id;
 	__u32 btf_key_type_id;
 	__u32 btf_value_type_id;
+	__u32 :32;	/* alignment pad */
+	__u64 map_extra;
 } __attribute__((aligned(8)));
 
 struct bpf_btf_info {
diff --git a/tools/include/uapi/linux/btf.h b/tools/include/uapi/linux/btf.h
index d27b1708efe9..deb12f755f0f 100644
--- a/tools/include/uapi/linux/btf.h
+++ b/tools/include/uapi/linux/btf.h
@@ -43,7 +43,7 @@ struct btf_type {
 	 * "size" tells the size of the type it is describing.
 	 *
 	 * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT,
-	 * FUNC, FUNC_PROTO and VAR.
+	 * FUNC, FUNC_PROTO, VAR and DECL_TAG.
 	 * "type" is a type_id referring to another type.
 	 */
 	union {
@@ -56,25 +56,29 @@ struct btf_type {
 #define BTF_INFO_VLEN(info)	((info) & 0xffff)
 #define BTF_INFO_KFLAG(info)	((info) >> 31)
 
-#define BTF_KIND_UNKN		0	/* Unknown	*/
-#define BTF_KIND_INT		1	/* Integer	*/
-#define BTF_KIND_PTR		2	/* Pointer	*/
-#define BTF_KIND_ARRAY		3	/* Array	*/
-#define BTF_KIND_STRUCT		4	/* Struct	*/
-#define BTF_KIND_UNION		5	/* Union	*/
-#define BTF_KIND_ENUM		6	/* Enumeration	*/
-#define BTF_KIND_FWD		7	/* Forward	*/
-#define BTF_KIND_TYPEDEF	8	/* Typedef	*/
-#define BTF_KIND_VOLATILE	9	/* Volatile	*/
-#define BTF_KIND_CONST		10	/* Const	*/
-#define BTF_KIND_RESTRICT	11	/* Restrict	*/
-#define BTF_KIND_FUNC		12	/* Function	*/
-#define BTF_KIND_FUNC_PROTO	13	/* Function Proto	*/
-#define BTF_KIND_VAR		14	/* Variable	*/
-#define BTF_KIND_DATASEC	15	/* Section	*/
-#define BTF_KIND_FLOAT		16	/* Floating point	*/
-#define BTF_KIND_MAX		BTF_KIND_FLOAT
-#define NR_BTF_KINDS		(BTF_KIND_MAX + 1)
+enum {
+	BTF_KIND_UNKN		= 0,	/* Unknown	*/
+	BTF_KIND_INT		= 1,	/* Integer	*/
+	BTF_KIND_PTR		= 2,	/* Pointer	*/
+	BTF_KIND_ARRAY		= 3,	/* Array	*/
+	BTF_KIND_STRUCT		= 4,	/* Struct	*/
+	BTF_KIND_UNION		= 5,	/* Union	*/
+	BTF_KIND_ENUM		= 6,	/* Enumeration	*/
+	BTF_KIND_FWD		= 7,	/* Forward	*/
+	BTF_KIND_TYPEDEF	= 8,	/* Typedef	*/
+	BTF_KIND_VOLATILE	= 9,	/* Volatile	*/
+	BTF_KIND_CONST		= 10,	/* Const	*/
+	BTF_KIND_RESTRICT	= 11,	/* Restrict	*/
+	BTF_KIND_FUNC		= 12,	/* Function	*/
+	BTF_KIND_FUNC_PROTO	= 13,	/* Function Proto	*/
+	BTF_KIND_VAR		= 14,	/* Variable	*/
+	BTF_KIND_DATASEC	= 15,	/* Section	*/
+	BTF_KIND_FLOAT		= 16,	/* Floating point	*/
+	BTF_KIND_DECL_TAG	= 17,	/* Decl Tag */
+
+	NR_BTF_KINDS,
+	BTF_KIND_MAX		= NR_BTF_KINDS - 1,
+};
 
 /* For some specific BTF_KIND, "struct btf_type" is immediately
  * followed by extra data.
@@ -170,4 +174,15 @@ struct btf_var_secinfo {
 	__u32	size;
 };
 
+/* BTF_KIND_DECL_TAG is followed by a single "struct btf_decl_tag" to describe
+ * additional information related to the tag applied location.
+ * If component_idx == -1, the tag is applied to a struct, union,
+ * variable or function. Otherwise, it is applied to a struct/union
+ * member or a func argument, and component_idx indicates which member
+ * or argument (0 ... vlen-1).
+ */
+struct btf_decl_tag {
+       __s32   component_idx;
+};
+
 #endif /* _UAPI__LINUX_BTF_H__ */