diff options
| author | Edson Juliano Drosdeck <edson.drosdeck@gmail.com> | 2023-07-19 17:02:41 -0300 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2023-07-23 23:40:05 +0100 |
| commit | 1bc40efdaf4a0ccfdb10a1c8e4b458f4764e8e5f (patch) | |
| tree | e12316154a949686c857159f6c28279a373f6f9d /sound | |
| parent | 1477c794c771be0a873a41421812e7274717dcd1 (diff) | |
ASoC: nau8821: Add DMI quirk mechanism for active-high jack-detect
Add a quirk mechanism to allow specifying that active-high jack-detection
should be used on platforms where this info is not available in devicetree.
And add an entry for the Positivo CW14Q01P-V2 to the DMI table, so that
jack-detection will work properly on this laptop.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20230719200241.4865-1-edson.drosdeck@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'sound')
| -rw-r--r-- | sound/soc/codecs/nau8821.c | 41 |
1 files changed, 41 insertions, 0 deletions
diff --git a/sound/soc/codecs/nau8821.c b/sound/soc/codecs/nau8821.c index 96d75882b33a..ca6beb2d2649 100644 --- a/sound/soc/codecs/nau8821.c +++ b/sound/soc/codecs/nau8821.c @@ -10,6 +10,7 @@ #include <linux/acpi.h> #include <linux/clk.h> #include <linux/delay.h> +#include <linux/dmi.h> #include <linux/init.h> #include <linux/i2c.h> #include <linux/module.h> @@ -25,6 +26,13 @@ #include <sound/tlv.h> #include "nau8821.h" +#define NAU8821_JD_ACTIVE_HIGH BIT(0) + +static int nau8821_quirk; +static int quirk_override = -1; +module_param_named(quirk, quirk_override, uint, 0444); +MODULE_PARM_DESC(quirk, "Board-specific quirk override"); + #define NAU_FREF_MAX 13500000 #define NAU_FVCO_MAX 100000000 #define NAU_FVCO_MIN 90000000 @@ -1792,6 +1800,33 @@ static int nau8821_setup_irq(struct nau8821 *nau8821) return 0; } +/* Please keep this list alphabetically sorted */ +static const struct dmi_system_id nau8821_quirk_table[] = { + { + /* Positivo CW14Q01P-V2 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Positivo Tecnologia SA"), + DMI_MATCH(DMI_BOARD_NAME, "CW14Q01P-V2"), + }, + .driver_data = (void *)(NAU8821_JD_ACTIVE_HIGH), + }, + {} +}; + +static void nau8821_check_quirks(void) +{ + const struct dmi_system_id *dmi_id; + + if (quirk_override != -1) { + nau8821_quirk = quirk_override; + return; + } + + dmi_id = dmi_first_match(nau8821_quirk_table); + if (dmi_id) + nau8821_quirk = (unsigned long)dmi_id->driver_data; +} + static int nau8821_i2c_probe(struct i2c_client *i2c) { struct device *dev = &i2c->dev; @@ -1812,6 +1847,12 @@ static int nau8821_i2c_probe(struct i2c_client *i2c) nau8821->dev = dev; nau8821->irq = i2c->irq; + + nau8821_check_quirks(); + + if (nau8821_quirk & NAU8821_JD_ACTIVE_HIGH) + nau8821->jkdet_polarity = 0; + nau8821_print_device_properties(nau8821); nau8821_reset_chip(nau8821->regmap); |