diff options
author | Richard Fitzgerald <rf@opensource.cirrus.com> | 2023-09-18 10:51:29 +0100 |
---|---|---|
committer | Takashi Iwai <tiwai@suse.de> | 2023-09-18 17:49:28 +0200 |
commit | 2144833e7b41459fa2d52bb0676f0ab4920cf32c (patch) | |
tree | 24a44f3394dd2f14c63869fabc6675e62273525d /sound/pci/hda | |
parent | 6f03b446cbaeb3187b1df1e7e8b13c6340cd6c68 (diff) |
ALSA: hda: cirrus_scodec: Add KUnit test
Add a KUnit test for cirrus_scodec_get_speaker_id(). It is impractical
to have enough hardware with every possible permutation of speaker id.
So use a test harness to test all theoretically supported options.
The test harness consists of:
- a mock GPIO controller.
- a mock struct device to represent the scodec driver
- software nodes to provide the fwnode info that would normally come
from ACPI.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230918095129.440-3-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/pci/hda')
-rw-r--r-- | sound/pci/hda/Kconfig | 12 | ||||
-rw-r--r-- | sound/pci/hda/Makefile | 2 | ||||
-rw-r--r-- | sound/pci/hda/cirrus_scodec_test.c | 370 | ||||
-rw-r--r-- | sound/pci/hda/cs35l56_hda.c | 10 |
4 files changed, 394 insertions, 0 deletions
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index 2980bfef0a4c..706cdc589e6f 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -94,6 +94,18 @@ config SND_HDA_PATCH_LOADER config SND_HDA_CIRRUS_SCODEC tristate +config SND_HDA_CIRRUS_SCODEC_KUNIT_TEST + tristate "KUnit test for Cirrus side-codec library" if !KUNIT_ALL_TESTS + select SND_HDA_CIRRUS_SCODEC + depends on KUNIT + default KUNIT_ALL_TESTS + help + This builds KUnit tests for the cirrus side-codec library. + For more information on KUnit and unit tests in general, + please refer to the KUnit documentation in + Documentation/dev-tools/kunit/. + If in doubt, say "N". + config SND_HDA_SCODEC_CS35L41 tristate select SND_HDA_GENERIC diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile index aa445af0cf9a..793e296c3f64 100644 --- a/sound/pci/hda/Makefile +++ b/sound/pci/hda/Makefile @@ -29,6 +29,7 @@ snd-hda-codec-hdmi-objs := patch_hdmi.o hda_eld.o # side codecs snd-hda-cirrus-scodec-objs := cirrus_scodec.o +snd-hda-cirrus-scodec-test-objs := cirrus_scodec_test.o snd-hda-scodec-cs35l41-objs := cs35l41_hda.o cs35l41_hda_property.o snd-hda-scodec-cs35l41-i2c-objs := cs35l41_hda_i2c.o snd-hda-scodec-cs35l41-spi-objs := cs35l41_hda_spi.o @@ -58,6 +59,7 @@ obj-$(CONFIG_SND_HDA_CODEC_HDMI) += snd-hda-codec-hdmi.o # side codecs obj-$(CONFIG_SND_HDA_CIRRUS_SCODEC) += snd-hda-cirrus-scodec.o +obj-$(CONFIG_SND_HDA_CIRRUS_SCODEC_KUNIT_TEST) += snd-hda-cirrus-scodec-test.o obj-$(CONFIG_SND_HDA_SCODEC_CS35L41) += snd-hda-scodec-cs35l41.o obj-$(CONFIG_SND_HDA_SCODEC_CS35L41_I2C) += snd-hda-scodec-cs35l41-i2c.o obj-$(CONFIG_SND_HDA_SCODEC_CS35L41_SPI) += snd-hda-scodec-cs35l41-spi.o diff --git a/sound/pci/hda/cirrus_scodec_test.c b/sound/pci/hda/cirrus_scodec_test.c new file mode 100644 index 000000000000..5eb590cd4fe2 --- /dev/null +++ b/sound/pci/hda/cirrus_scodec_test.c @@ -0,0 +1,370 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// KUnit test for the Cirrus side-codec library. +// +// Copyright (C) 2023 Cirrus Logic, Inc. and +// Cirrus Logic International Semiconductor Ltd. + +#include <kunit/test.h> +#include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "cirrus_scodec.h" + +struct cirrus_scodec_test_gpio { + unsigned int pin_state; + struct gpio_chip chip; +}; + +struct cirrus_scodec_test_priv { + struct platform_device amp_pdev; + struct platform_device *gpio_pdev; + struct cirrus_scodec_test_gpio *gpio_priv; +}; + +static int cirrus_scodec_test_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + return GPIO_LINE_DIRECTION_IN; +} + +static int cirrus_scodec_test_gpio_direction_in(struct gpio_chip *chip, + unsigned int offset) +{ + return 0; +} + +static int cirrus_scodec_test_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct cirrus_scodec_test_gpio *gpio_priv = gpiochip_get_data(chip); + + return !!(gpio_priv->pin_state & BIT(offset)); +} + +static int cirrus_scodec_test_gpio_direction_out(struct gpio_chip *chip, + unsigned int offset, int value) +{ + return -EOPNOTSUPP; +} + +static void cirrus_scodec_test_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ +} + +static int cirrus_scodec_test_gpio_set_config(struct gpio_chip *gc, + unsigned int offset, + unsigned long config) +{ + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_OUTPUT: + case PIN_CONFIG_OUTPUT_ENABLE: + return -EOPNOTSUPP; + default: + return 0; + } +} + +static const struct gpio_chip cirrus_scodec_test_gpio_chip = { + .label = "cirrus_scodec_test_gpio", + .owner = THIS_MODULE, + .request = gpiochip_generic_request, + .free = gpiochip_generic_free, + .get_direction = cirrus_scodec_test_gpio_get_direction, + .direction_input = cirrus_scodec_test_gpio_direction_in, + .get = cirrus_scodec_test_gpio_get, + .direction_output = cirrus_scodec_test_gpio_direction_out, + .set = cirrus_scodec_test_gpio_set, + .set_config = cirrus_scodec_test_gpio_set_config, + .base = -1, + .ngpio = 32, +}; + +static int cirrus_scodec_test_gpio_probe(struct platform_device *pdev) +{ + struct cirrus_scodec_test_gpio *gpio_priv; + int ret; + + gpio_priv = devm_kzalloc(&pdev->dev, sizeof(*gpio_priv), GFP_KERNEL); + if (!gpio_priv) + return -ENOMEM; + + /* GPIO core modifies our struct gpio_chip so use a copy */ + gpio_priv->chip = cirrus_scodec_test_gpio_chip; + ret = devm_gpiochip_add_data(&pdev->dev, &gpio_priv->chip, gpio_priv); + if (ret) + return dev_err_probe(&pdev->dev, ret, "Failed to add gpiochip\n"); + + dev_set_drvdata(&pdev->dev, gpio_priv); + + return 0; +} + +static struct platform_driver cirrus_scodec_test_gpio_driver = { + .driver.name = "cirrus_scodec_test_gpio_drv", + .probe = cirrus_scodec_test_gpio_probe, +}; + +/* software_node referencing the gpio driver */ +static const struct software_node cirrus_scodec_test_gpio_swnode = { + .name = "cirrus_scodec_test_gpio", +}; + +static int cirrus_scodec_test_create_gpio(struct kunit *test) +{ + struct cirrus_scodec_test_priv *priv = test->priv; + int ret; + + priv->gpio_pdev = platform_device_alloc(cirrus_scodec_test_gpio_driver.driver.name, -1); + if (!priv->gpio_pdev) + return -ENOMEM; + + ret = device_add_software_node(&priv->gpio_pdev->dev, &cirrus_scodec_test_gpio_swnode); + if (ret) { + platform_device_put(priv->gpio_pdev); + KUNIT_FAIL(test, "Failed to add swnode to gpio: %d\n", ret); + return ret; + } + + ret = platform_device_add(priv->gpio_pdev); + if (ret) { + platform_device_put(priv->gpio_pdev); + KUNIT_FAIL(test, "Failed to add gpio platform device: %d\n", ret); + return ret; + } + + priv->gpio_priv = dev_get_drvdata(&priv->gpio_pdev->dev); + if (!priv->gpio_priv) { + platform_device_put(priv->gpio_pdev); + KUNIT_FAIL(test, "Failed to get gpio private data: %d\n", ret); + return ret; + } + + return 0; +} + +static void cirrus_scodec_test_set_gpio_ref_arg(struct software_node_ref_args *arg, + int gpio_num) +{ + struct software_node_ref_args template = + SOFTWARE_NODE_REFERENCE(&cirrus_scodec_test_gpio_swnode, gpio_num, 0); + + *arg = template; +} + +static int cirrus_scodec_test_set_spkid_swnode(struct kunit *test, + struct device *dev, + struct software_node_ref_args *args, + int num_args) +{ + const struct property_entry props_template[] = { + PROPERTY_ENTRY_REF_ARRAY_LEN("spk-id-gpios", args, num_args), + { } + }; + struct property_entry *props; + struct software_node *node; + + node = kunit_kzalloc(test, sizeof(*node), GFP_KERNEL); + if (!node) + return -ENOMEM; + + props = kunit_kzalloc(test, sizeof(props_template), GFP_KERNEL); + if (!props) + return -ENOMEM; + + memcpy(props, props_template, sizeof(props_template)); + node->properties = props; + + return device_add_software_node(dev, node); +} + +struct cirrus_scodec_test_spkid_param { + int num_amps; + int gpios_per_amp; + int num_amps_sharing; +}; + +static void cirrus_scodec_test_spkid_parse(struct kunit *test) +{ + struct cirrus_scodec_test_priv *priv = test->priv; + const struct cirrus_scodec_test_spkid_param *param = test->param_value; + int num_spk_id_refs = param->num_amps * param->gpios_per_amp; + struct software_node_ref_args *refs; + struct device *dev = &priv->amp_pdev.dev; + unsigned int v; + int i, ret; + + refs = kunit_kcalloc(test, num_spk_id_refs, sizeof(*refs), GFP_KERNEL); + KUNIT_ASSERT_NOT_NULL(test, refs); + + for (i = 0, v = 0; i < num_spk_id_refs; ) { + cirrus_scodec_test_set_gpio_ref_arg(&refs[i++], v++); + + /* + * If amps are sharing GPIOs repeat the last set of + * GPIOs until we've done that number of amps. + * We have done all GPIOs for an amp when i is a multiple + * of gpios_per_amp. + * We have done all amps sharing the same GPIOs when i is + * a multiple of (gpios_per_amp * num_amps_sharing). + */ + if (!(i % param->gpios_per_amp) && + (i % (param->gpios_per_amp * param->num_amps_sharing))) + v -= param->gpios_per_amp; + } + + ret = cirrus_scodec_test_set_spkid_swnode(test, dev, refs, num_spk_id_refs); + KUNIT_EXPECT_EQ_MSG(test, ret, 0, "Failed to add swnode\n"); + + for (i = 0; i < param->num_amps; ++i) { + for (v = 0; v < (1 << param->gpios_per_amp); ++v) { + /* Set only the GPIO bits used by this amp */ + priv->gpio_priv->pin_state = + v << (param->gpios_per_amp * (i / param->num_amps_sharing)); + + ret = cirrus_scodec_get_speaker_id(dev, i, param->num_amps, -1); + KUNIT_EXPECT_EQ_MSG(test, ret, v, + "get_speaker_id failed amp:%d pin_state:%#x\n", + i, priv->gpio_priv->pin_state); + } + } +} + +static void cirrus_scodec_test_no_spkid(struct kunit *test) +{ + struct cirrus_scodec_test_priv *priv = test->priv; + struct device *dev = &priv->amp_pdev.dev; + int ret; + + ret = cirrus_scodec_get_speaker_id(dev, 0, 4, -1); + KUNIT_EXPECT_EQ(test, ret, -ENOENT); +} + +static void cirrus_scodec_test_dev_release(struct device *dev) +{ +} + +static int cirrus_scodec_test_case_init(struct kunit *test) +{ + struct cirrus_scodec_test_priv *priv; + int ret; + + priv = kunit_kzalloc(test, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + test->priv = priv; + + /* Create dummy GPIO */ + ret = cirrus_scodec_test_create_gpio(test); + if (ret < 0) + return ret; + + /* Create dummy amp driver dev */ + priv->amp_pdev.name = "cirrus_scodec_test_amp_drv"; + priv->amp_pdev.id = -1; + priv->amp_pdev.dev.release = cirrus_scodec_test_dev_release; + ret = platform_device_register(&priv->amp_pdev); + KUNIT_ASSERT_GE_MSG(test, ret, 0, "Failed to register amp platform device\n"); + + return 0; +} + +static void cirrus_scodec_test_case_exit(struct kunit *test) +{ + struct cirrus_scodec_test_priv *priv = test->priv; + + if (priv->amp_pdev.name) + platform_device_unregister(&priv->amp_pdev); + + if (priv->gpio_pdev) { + device_remove_software_node(&priv->gpio_pdev->dev); + platform_device_unregister(priv->gpio_pdev); + } +} + +static int cirrus_scodec_test_suite_init(struct kunit_suite *suite) +{ + int ret; + + /* Register mock GPIO driver */ + ret = platform_driver_register(&cirrus_scodec_test_gpio_driver); + if (ret < 0) { + kunit_err(suite, "Failed to register gpio platform driver, %d\n", ret); + return ret; + } + + return 0; +} + +static void cirrus_scodec_test_suite_exit(struct kunit_suite *suite) +{ + platform_driver_unregister(&cirrus_scodec_test_gpio_driver); +} + +static const struct cirrus_scodec_test_spkid_param cirrus_scodec_test_spkid_param_cases[] = { + { .num_amps = 2, .gpios_per_amp = 1, .num_amps_sharing = 1 }, + { .num_amps = 2, .gpios_per_amp = 2, .num_amps_sharing = 1 }, + { .num_amps = 2, .gpios_per_amp = 3, .num_amps_sharing = 1 }, + { .num_amps = 2, .gpios_per_amp = 4, .num_amps_sharing = 1 }, + { .num_amps = 3, .gpios_per_amp = 1, .num_amps_sharing = 1 }, + { .num_amps = 3, .gpios_per_amp = 2, .num_amps_sharing = 1 }, + { .num_amps = 3, .gpios_per_amp = 3, .num_amps_sharing = 1 }, + { .num_amps = 3, .gpios_per_amp = 4, .num_amps_sharing = 1 }, + { .num_amps = 4, .gpios_per_amp = 1, .num_amps_sharing = 1 }, + { .num_amps = 4, .gpios_per_amp = 2, .num_amps_sharing = 1 }, + { .num_amps = 4, .gpios_per_amp = 3, .num_amps_sharing = 1 }, + { .num_amps = 4, .gpios_per_amp = 4, .num_amps_sharing = 1 }, + + /* Same GPIO shared by all amps */ + { .num_amps = 2, .gpios_per_amp = 1, .num_amps_sharing = 2 }, + { .num_amps = 2, .gpios_per_amp = 2, .num_amps_sharing = 2 }, + { .num_amps = 2, .gpios_per_amp = 3, .num_amps_sharing = 2 }, + { .num_amps = 2, .gpios_per_amp = 4, .num_amps_sharing = 2 }, + { .num_amps = 3, .gpios_per_amp = 1, .num_amps_sharing = 3 }, + { .num_amps = 3, .gpios_per_amp = 2, .num_amps_sharing = 3 }, + { .num_amps = 3, .gpios_per_amp = 3, .num_amps_sharing = 3 }, + { .num_amps = 3, .gpios_per_amp = 4, .num_amps_sharing = 3 }, + { .num_amps = 4, .gpios_per_amp = 1, .num_amps_sharing = 4 }, + { .num_amps = 4, .gpios_per_amp = 2, .num_amps_sharing = 4 }, + { .num_amps = 4, .gpios_per_amp = 3, .num_amps_sharing = 4 }, + { .num_amps = 4, .gpios_per_amp = 4, .num_amps_sharing = 4 }, + + /* Two sets of shared GPIOs */ + { .num_amps = 4, .gpios_per_amp = 1, .num_amps_sharing = 2 }, + { .num_amps = 4, .gpios_per_amp = 2, .num_amps_sharing = 2 }, + { .num_amps = 4, .gpios_per_amp = 3, .num_amps_sharing = 2 }, + { .num_amps = 4, .gpios_per_amp = 4, .num_amps_sharing = 2 }, +}; + +static void cirrus_scodec_test_spkid_param_desc(const struct cirrus_scodec_test_spkid_param *param, + char *desc) +{ + snprintf(desc, KUNIT_PARAM_DESC_SIZE, "amps:%d gpios_per_amp:%d num_amps_sharing:%d", + param->num_amps, param->gpios_per_amp, param->num_amps_sharing); +} + +KUNIT_ARRAY_PARAM(cirrus_scodec_test_spkid, cirrus_scodec_test_spkid_param_cases, + cirrus_scodec_test_spkid_param_desc); + +static struct kunit_case cirrus_scodec_test_cases[] = { + KUNIT_CASE_PARAM(cirrus_scodec_test_spkid_parse, cirrus_scodec_test_spkid_gen_params), + KUNIT_CASE(cirrus_scodec_test_no_spkid), + { } /* terminator */ +}; + +static struct kunit_suite cirrus_scodec_test_suite = { + .name = "snd-hda-scodec-cs35l56-test", + .suite_init = cirrus_scodec_test_suite_init, + .suite_exit = cirrus_scodec_test_suite_exit, + .init = cirrus_scodec_test_case_init, + .exit = cirrus_scodec_test_case_exit, + .test_cases = cirrus_scodec_test_cases, +}; + +kunit_test_suite(cirrus_scodec_test_suite); + +MODULE_IMPORT_NS(SND_HDA_CIRRUS_SCODEC); +MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>"); +MODULE_LICENSE("GPL"); diff --git a/sound/pci/hda/cs35l56_hda.c b/sound/pci/hda/cs35l56_hda.c index 44f5ca0e73e3..d3cfdad7dd76 100644 --- a/sound/pci/hda/cs35l56_hda.c +++ b/sound/pci/hda/cs35l56_hda.c @@ -1035,6 +1035,16 @@ const struct dev_pm_ops cs35l56_hda_pm_ops = { }; EXPORT_SYMBOL_NS_GPL(cs35l56_hda_pm_ops, SND_HDA_SCODEC_CS35L56); +#if IS_ENABLED(CONFIG_SND_HDA_SCODEC_CS35L56_KUNIT_TEST) +/* Hooks to export static function to KUnit test */ + +int cs35l56_hda_test_hook_get_speaker_id(struct device *dev, int amp_index, int num_amps) +{ + return cs35l56_hda_get_speaker_id(dev, amp_index, num_amps); +} +EXPORT_SYMBOL_NS_GPL(cs35l56_hda_test_hook_get_speaker_id, SND_HDA_SCODEC_CS35L56); +#endif + MODULE_DESCRIPTION("CS35L56 HDA Driver"); MODULE_IMPORT_NS(SND_HDA_CIRRUS_SCODEC); MODULE_IMPORT_NS(SND_HDA_CS_DSP_CONTROLS); |