diff options
| author | Lior Amsalem <alior@marvell.com> | 2014-01-14 20:09:57 +0100 |
|---|---|---|
| committer | Tejun Heo <tj@kernel.org> | 2014-01-15 07:44:02 -0500 |
| commit | 9013d64e661fc2a37a1742670202171c27fef4b5 (patch) | |
| tree | e58a512bbc7d8bd815bef96321d2cfc6e24464e9 /drivers | |
| parent | b1f5c73bd5a4752efb7d7af019034044b08aafe9 (diff) | |
ata: sata_mv: fix disk hotplug for Armada 370/XP SoCs
On Armada 370/XP SoCs, once a disk is removed from a SATA port, then the
re-plug events are not detected by the sata_mv driver. This patch fixes
the issue by updating the PHY speed in the LP_PHY_CTL register (0x58)
according to the SControl speed.
Note that this fix is only applied if the compatible string
"marvell,armada-370-sata" is found in the SATA DT node.
Fixes: 9ae6f740b49f ("arm: mach-mvebu: add support for Armada 370 and Armada XP with DT")
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: stable@vger.kernel.org # v3.6+
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ata/sata_mv.c | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 4ec5368c10f7..dc9d4b1ea4ec 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -304,6 +304,7 @@ enum { MV5_LTMODE = 0x30, MV5_PHY_CTL = 0x0C, SATA_IFCFG = 0x050, + LP_PHY_CTL = 0x058, MV_M2_PREAMP_MASK = 0x7e0, @@ -431,6 +432,7 @@ enum { MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ MV_HP_QUIRK_LED_BLINK_EN = (1 << 12), /* is led blinking enabled? */ + MV_HP_FIX_LP_PHY_CTL = (1 << 13), /* fix speed in LP_PHY_CTL ? */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ @@ -1358,6 +1360,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) if (ofs != 0xffffffffU) { void __iomem *addr = mv_ap_base(link->ap) + ofs; + struct mv_host_priv *hpriv = link->ap->host->private_data; if (sc_reg_in == SCR_CONTROL) { /* * Workaround for 88SX60x1 FEr SATA#26: @@ -1374,6 +1377,18 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) */ if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1) val |= 0xf000; + + if (hpriv->hp_flags & MV_HP_FIX_LP_PHY_CTL) { + void __iomem *lp_phy_addr = + mv_ap_base(link->ap) + LP_PHY_CTL; + /* + * Set PHY speed according to SControl speed. + */ + if ((val & 0xf0) == 0x10) + writelfl(0x7, lp_phy_addr); + else + writelfl(0x227, lp_phy_addr); + } } writelfl(val, addr); return 0; @@ -4110,6 +4125,15 @@ static int mv_platform_probe(struct platform_device *pdev) if (rc) goto err; + /* + * To allow disk hotplug on Armada 370/XP SoCs, the PHY speed must be + * updated in the LP_PHY_CTL register. + */ + if (pdev->dev.of_node && + of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-370-sata")) + hpriv->hp_flags |= MV_HP_FIX_LP_PHY_CTL; + /* initialize adapter */ rc = mv_init_host(host); if (rc) |