Merge tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt patches for 5.14-rc1.

  Nothing major here just lots of little changes for new hardware and
  features. Highlights are:

   - more USB 4 support added to the thunderbolt core

   - build warning fixes all over the place

   - usb-serial driver updates and new device support

   - mtu3 driver updates

   - gadget driver updates

   - dwc3 driver updates

   - dwc2 driver updates

   - isp1760 host driver updates

   - musb driver updates

   - lots of other tiny things.

  Full details are in the shortlog.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits)
  phy: qcom-qusb2: Add configuration for SM4250 and SM6115
  dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible
  dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250
  USB: cdc-acm: blacklist Heimann USB Appset device
  usb: xhci-mtk: allow multiple Start-Split in a microframe
  usb: ftdi-elan: remove redundant continue statement in a while-loop
  usb: class: cdc-wdm: return the correct errno code
  xhci: remove redundant continue statement
  usb: dwc3: Fix debugfs creation flow
  usb: gadget: hid: fix error return code in hid_bind()
  usb: gadget: eem: fix echo command packet response issue
  usb: gadget: f_hid: fix endianness issue with descriptors
  Revert "USB: misc: Add onboard_usb_hub driver"
  Revert "of/platform: Add stubs for of_platform_device_create/destroy()"
  Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()"
  Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub"
  xhci: solve a double free problem while doing s4
  xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning
  xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk
  xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES
  ...

1 files changed, 69 insertions, 2 deletions

diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 7e6dc2b03bed..2897a77d44c3 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -10,6 +10,7 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/pm_runtime.h>
+#include <linux/platform_data/x86/apple.h>
 
 #include "tb.h"
 #include "tb_regs.h"
@@ -595,7 +596,7 @@ static void tb_scan_port(struct tb_port *port)
 		return;
 	}
 
-	tb_retimer_scan(port);
+	tb_retimer_scan(port, true);
 
 	sw = tb_switch_alloc(port->sw->tb, &port->sw->dev,
 			     tb_downstream_route(port));
@@ -662,7 +663,7 @@ static void tb_scan_port(struct tb_port *port)
 		tb_sw_warn(sw, "failed to enable TMU\n");
 
 	/* Scan upstream retimers */
-	tb_retimer_scan(upstream_port);
+	tb_retimer_scan(upstream_port, true);
 
 	/*
 	 * Create USB 3.x tunnels only when the switch is plugged to the
@@ -1571,6 +1572,69 @@ static const struct tb_cm_ops tb_cm_ops = {
 	.disconnect_xdomain_paths = tb_disconnect_xdomain_paths,
 };
 
+/*
+ * During suspend the Thunderbolt controller is reset and all PCIe
+ * tunnels are lost. The NHI driver will try to reestablish all tunnels
+ * during resume. This adds device links between the tunneled PCIe
+ * downstream ports and the NHI so that the device core will make sure
+ * NHI is resumed first before the rest.
+ */
+static void tb_apple_add_links(struct tb_nhi *nhi)
+{
+	struct pci_dev *upstream, *pdev;
+
+	if (!x86_apple_machine)
+		return;
+
+	switch (nhi->pdev->device) {
+	case PCI_DEVICE_ID_INTEL_LIGHT_RIDGE:
+	case PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C:
+	case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI:
+	case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI:
+		break;
+	default:
+		return;
+	}
+
+	upstream = pci_upstream_bridge(nhi->pdev);
+	while (upstream) {
+		if (!pci_is_pcie(upstream))
+			return;
+		if (pci_pcie_type(upstream) == PCI_EXP_TYPE_UPSTREAM)
+			break;
+		upstream = pci_upstream_bridge(upstream);
+	}
+
+	if (!upstream)
+		return;
+
+	/*
+	 * For each hotplug downstream port, create add device link
+	 * back to NHI so that PCIe tunnels can be re-established after
+	 * sleep.
+	 */
+	for_each_pci_bridge(pdev, upstream->subordinate) {
+		const struct device_link *link;
+
+		if (!pci_is_pcie(pdev))
+			continue;
+		if (pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM ||
+		    !pdev->is_hotplug_bridge)
+			continue;
+
+		link = device_link_add(&pdev->dev, &nhi->pdev->dev,
+				       DL_FLAG_AUTOREMOVE_SUPPLIER |
+				       DL_FLAG_PM_RUNTIME);
+		if (link) {
+			dev_dbg(&nhi->pdev->dev, "created link from %s\n",
+				dev_name(&pdev->dev));
+		} else {
+			dev_warn(&nhi->pdev->dev, "device link creation from %s failed\n",
+				 dev_name(&pdev->dev));
+		}
+	}
+}
+
 struct tb *tb_probe(struct tb_nhi *nhi)
 {
 	struct tb_cm *tcm;
@@ -1594,5 +1658,8 @@ struct tb *tb_probe(struct tb_nhi *nhi)
 
 	tb_dbg(tb, "using software connection manager\n");
 
+	tb_apple_add_links(nhi);
+	tb_acpi_add_links(nhi);
+
 	return tb;
 }