Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "We have some late breaking reports that a patch series to rework clk
  rate range support broke boot on some devices, so I've left that
  branch out of this. Hopefully we can get to that next week, or punt on
  it and let it bake another cycle. That means we don't really have any
  changes to the core framework this time around besides a few typo
  fixes. Instead this is all clk driver updates and fixes.

  The usual suspects are here (again), with Qualcomm dominating the
  diffstat. We look to have gained support for quite a few new Qualcomm
  SoCs and Dmitry worked on updating many of the existing Qualcomm
  drivers to use clk_parent_data. After that we have MediaTek drivers
  getting some much needed updates, in particular to support GPU DVFS.
  There are also quite a few Samsung clk driver patches, but that's
  mostly because there was a maintainer change and so last release we
  missed some of those patches.

  Overall things look normal, but I'm slowly reviewing core framework
  code nowadays and that shows given the rate range patches had to be
  yanked last minute. Let's hope this situation changes soon.

  New Drivers:
   - Support for Renesas VersaClock7 clock generator family
   - Add Spreadtrum UMS512 SoC clk support
   - New clock drivers for MediaTek Helio X10 MT6795
   - Display clks for Qualcomm SM6115, SM8450
   - GPU clks for Qualcomm SC8280XP
   - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers

  Deleted Drivers:
   - Remove DaVinci DM644x and DM646x clk driver support

  Updates:
   - Convert Baikal-T1 CCU driver to platform driver
   - Split reset support out of primary Baikal-T1 CCU driver
   - Add some missing clks required for RPiVid Video Decoder on
     RaspberryPi
   - Mark PLLC critical on bcm2835
   - More devm helpers for fixed rate registration
   - Various PXA168 clk driver fixes
   - Add resets for MediaTek MT8195 PCIe and USB
   - Miscellaneous of_node_put() fixes
   - Nuke dt-bindings/clk path (again) by moving headers to
     dt-bindings/clock
   - Convert gpio-clk-gate binding to YAML
   - Various fixes to AMD/Xilinx Zynqmp clk driver
   - Graduate AMD/Xilinx "clocking wizard" driver from staging
   - Add missing DPI1_HDMI clock in MT8195 VDOSYS1
   - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195
   - Fix GPU clock topology on MT8195
   - Propogate rate changes from GPU clock gate up the tree
   - Clock mux notifiers for GPU-related PLLs
   - Conversion of more "simple" drivers to mtk_clk_simple_probe()
   - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers
   - Fixes to previous |struct clk| to |struct clk_hw| conversion on
     MediaTek
   - Shrink MT8192 clock driver by deduplicating clock parent lists
   - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk'
     clocks for i.MX8MP
   - Drop unnecessary newline in i.MX8MM dt-bindings
   - Add more MU1 and SAI clocks dt-bindings Ids
   - Introduce slice busy bit check for i.MX93 composite clock
   - Introduce white list bit check for i.MX93 composite clock
   - Add new i.MX93 clock gate
   - Add MU1 and MU2 clocks to i.MX93 clock provider
   - Add SAI IPG clocks to i.MX93 clock provider
   - add generic clocks for U(S)ART available on SAMA5D2 SoCs
   - reset controller support for Polarfire clocks
   - .round_rate and .set rate support for clk-mpfs
   - code cleanup for clk-mpfs
   - PLL support for PolarFire SoC's Clock Conditioning Circuitry
   - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car
     V4H
   - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8
   - Add I2C clocks and resets on RZ/V2M
   - Document clock support for the RZ/Five SoC
   - mux-variant clock using the table variant to select parents
   - clock controller for the rv1126 soc
   - conversion of rk3128 to yaml and relicensing of the yaml bindings
     to gpl2+MIT (following dt-binding guildelines)
   - Exynos7885: add FSYS, TREX and MFC clock controllers
   - Exynos850: add IS and AUD (audio) clock controllers with bindings
   - ExynosAutov9: add FSYS clock controllers with bindings
   - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock
     controllers, due to duplicated entries. This is an acceptable ABI
     break: recently developed/added platform so without legacies, acked
     by known users/developers
   - ExynosAutov9: add few missing Peric 0/1 gates
   - ExynosAutov9: correct register offsets of few Peric 0/1 clocks
   - Minor code improvements (use of_device_get_match_data() helper,
     code style)
   - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as
     he already maintainers that architecture/platform
   - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving
     retention issues during suspend of USB on Qualcomm sc7180/sc7280
     and SC8280XP
   - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration
   - Qualcomm SDM660 SDCC1 moved to floor clk ops
   - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018
     was added/fixed
   - The Qualcomm MSM8996 CPU clocks are updated with support for ACD
   - Support for Qualcomm SDM670 GCC and RPMh clks was added
   - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for
     num_parents was done for many Qualcomm SoCs
   - Support for per-reset defined delay on Qualcomm was introduced"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits)
  clk: qcom: gcc-sm6375: Ensure unsigned long type
  clk: qcom: gcc-sm6375: Remove unused variables
  clk: qcom: kpss-xcc: convert to parent data API
  clk: introduce (devm_)hw_register_mux_parent_data_table API
  clk: allow building lan966x as a module
  clk: clk-xgene: simplify if-if to if-else
  clk: ast2600: BCLK comes from EPLL
  clk: clocking-wizard: Depend on HAS_IOMEM
  clk: clocking-wizard: Use dev_err_probe() helper
  clk: nxp: fix typo in comment
  clk: pxa: add a check for the return value of kzalloc()
  clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975
  dt-bindings: clock: vc5: Add 5P49V6975
  clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
  clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
  clk: Renesas versaclock7 ccf device driver
  dt-bindings: Renesas versaclock7 device tree bindings
  clk: ti: Balance of_node_get() calls for of_find_node_by_name()
  clk: imx: scu: fix memleak on platform_device_add() fails
  clk: vc5: Use regmap_{set,clear}_bits() where appropriate
  ...

7 files changed, 0 insertions, 692 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 64a531accd72..5cfabd5376cc 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -60,8 +60,6 @@ source "drivers/staging/board/Kconfig"
 
 source "drivers/staging/gdm724x/Kconfig"
 
-source "drivers/staging/clocking-wizard/Kconfig"
-
 source "drivers/staging/fbtft/Kconfig"
 
 source "drivers/staging/most/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 6af299b9045b..f8c3aa9c2418 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -20,7 +20,6 @@ obj-$(CONFIG_USB_EMXX)		+= emxx_udc/
 obj-$(CONFIG_MFD_NVEC)		+= nvec/
 obj-$(CONFIG_STAGING_BOARD)	+= board/
 obj-$(CONFIG_LTE_GDM724X)	+= gdm724x/
-obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD)	+= clocking-wizard/
 obj-$(CONFIG_FB_TFT)		+= fbtft/
 obj-$(CONFIG_MOST)		+= most/
 obj-$(CONFIG_KS7010)		+= ks7010/
diff --git a/drivers/staging/clocking-wizard/Kconfig b/drivers/staging/clocking-wizard/Kconfig
deleted file mode 100644
index 2324b5d73788..000000000000
--- a/drivers/staging/clocking-wizard/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Xilinx Clocking Wizard Driver
-#
-
-config COMMON_CLK_XLNX_CLKWZRD
-	tristate "Xilinx Clocking Wizard"
-	depends on COMMON_CLK && OF && HAS_IOMEM
-	help
-	  Support for the Xilinx Clocking Wizard IP core clock generator.
diff --git a/drivers/staging/clocking-wizard/Makefile b/drivers/staging/clocking-wizard/Makefile
deleted file mode 100644
index b1f915224d96..000000000000
--- a/drivers/staging/clocking-wizard/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD)	+= clk-xlnx-clock-wizard.o
diff --git a/drivers/staging/clocking-wizard/TODO b/drivers/staging/clocking-wizard/TODO
deleted file mode 100644
index c7e1dc58dfba..000000000000
--- a/drivers/staging/clocking-wizard/TODO
+++ /dev/null
@@ -1,13 +0,0 @@
-TODO:
-	- support for fractional multiplier
-	- support for fractional divider (output 0 only)
-	- support for set_rate() operations (may benefit from Stephen Boyd's
-	  refactoring of the clk primitives:
-	  https://lore.kernel.org/lkml/1409957256-23729-1-git-send-email-sboyd@codeaurora.org)
-	- review arithmetic
-	  - overflow after multiplication?
-	  - maximize accuracy before divisions
-
-Patches to:
-	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-	Sören Brinkmann <soren.brinkmann@xilinx.com>
diff --git a/drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c b/drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c
deleted file mode 100644
index 39367712ef54..000000000000
--- a/drivers/staging/clocking-wizard/clk-xlnx-clock-wizard.c
+++ /dev/null
@@ -1,634 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Xilinx 'Clocking Wizard' driver
- *
- *  Copyright (C) 2013 - 2014 Xilinx
- *
- *  Sören Brinkmann <soren.brinkmann@xilinx.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/iopoll.h>
-
-#define WZRD_NUM_OUTPUTS	7
-#define WZRD_ACLK_MAX_FREQ	250000000UL
-
-#define WZRD_CLK_CFG_REG(n)	(0x200 + 4 * (n))
-
-#define WZRD_CLKOUT0_FRAC_EN	BIT(18)
-#define WZRD_CLKFBOUT_FRAC_EN	BIT(26)
-
-#define WZRD_CLKFBOUT_MULT_SHIFT	8
-#define WZRD_CLKFBOUT_MULT_MASK		(0xff << WZRD_CLKFBOUT_MULT_SHIFT)
-#define WZRD_CLKFBOUT_FRAC_SHIFT	16
-#define WZRD_CLKFBOUT_FRAC_MASK		(0x3ff << WZRD_CLKFBOUT_FRAC_SHIFT)
-#define WZRD_DIVCLK_DIVIDE_SHIFT	0
-#define WZRD_DIVCLK_DIVIDE_MASK		(0xff << WZRD_DIVCLK_DIVIDE_SHIFT)
-#define WZRD_CLKOUT_DIVIDE_SHIFT	0
-#define WZRD_CLKOUT_DIVIDE_WIDTH	8
-#define WZRD_CLKOUT_DIVIDE_MASK		(0xff << WZRD_DIVCLK_DIVIDE_SHIFT)
-#define WZRD_CLKOUT_FRAC_SHIFT		8
-#define WZRD_CLKOUT_FRAC_MASK		0x3ff
-
-#define WZRD_DR_MAX_INT_DIV_VALUE	255
-#define WZRD_DR_STATUS_REG_OFFSET	0x04
-#define WZRD_DR_LOCK_BIT_MASK		0x00000001
-#define WZRD_DR_INIT_REG_OFFSET		0x25C
-#define WZRD_DR_DIV_TO_PHASE_OFFSET	4
-#define WZRD_DR_BEGIN_DYNA_RECONF	0x03
-
-#define WZRD_USEC_POLL		10
-#define WZRD_TIMEOUT_POLL		1000
-/* Get the mask from width */
-#define div_mask(width)			((1 << (width)) - 1)
-
-/* Extract divider instance from clock hardware instance */
-#define to_clk_wzrd_divider(_hw) container_of(_hw, struct clk_wzrd_divider, hw)
-
-enum clk_wzrd_int_clks {
-	wzrd_clk_mul,
-	wzrd_clk_mul_div,
-	wzrd_clk_mul_frac,
-	wzrd_clk_int_max
-};
-
-/**
- * struct clk_wzrd - Clock wizard private data structure
- *
- * @clk_data:		Clock data
- * @nb:			Notifier block
- * @base:		Memory base
- * @clk_in1:		Handle to input clock 'clk_in1'
- * @axi_clk:		Handle to input clock 's_axi_aclk'
- * @clks_internal:	Internal clocks
- * @clkout:		Output clocks
- * @speed_grade:	Speed grade of the device
- * @suspended:		Flag indicating power state of the device
- */
-struct clk_wzrd {
-	struct clk_onecell_data clk_data;
-	struct notifier_block nb;
-	void __iomem *base;
-	struct clk *clk_in1;
-	struct clk *axi_clk;
-	struct clk *clks_internal[wzrd_clk_int_max];
-	struct clk *clkout[WZRD_NUM_OUTPUTS];
-	unsigned int speed_grade;
-	bool suspended;
-};
-
-/**
- * struct clk_wzrd_divider - clock divider specific to clk_wzrd
- *
- * @hw:		handle between common and hardware-specific interfaces
- * @base:	base address of register containing the divider
- * @offset:	offset address of register containing the divider
- * @shift:	shift to the divider bit field
- * @width:	width of the divider bit field
- * @flags:	clk_wzrd divider flags
- * @table:	array of value/divider pairs, last entry should have div = 0
- * @lock:	register lock
- */
-struct clk_wzrd_divider {
-	struct clk_hw hw;
-	void __iomem *base;
-	u16 offset;
-	u8 shift;
-	u8 width;
-	u8 flags;
-	const struct clk_div_table *table;
-	spinlock_t *lock;  /* divider lock */
-};
-
-#define to_clk_wzrd(_nb) container_of(_nb, struct clk_wzrd, nb)
-
-/* maximum frequencies for input/output clocks per speed grade */
-static const unsigned long clk_wzrd_max_freq[] = {
-	800000000UL,
-	933000000UL,
-	1066000000UL
-};
-
-/* spin lock variable for clk_wzrd */
-static DEFINE_SPINLOCK(clkwzrd_lock);
-
-static unsigned long clk_wzrd_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
-{
-	struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
-	void __iomem *div_addr = divider->base + divider->offset;
-	unsigned int val;
-
-	val = readl(div_addr) >> divider->shift;
-	val &= div_mask(divider->width);
-
-	return divider_recalc_rate(hw, parent_rate, val, divider->table,
-			divider->flags, divider->width);
-}
-
-static int clk_wzrd_dynamic_reconfig(struct clk_hw *hw, unsigned long rate,
-				     unsigned long parent_rate)
-{
-	int err;
-	u32 value;
-	unsigned long flags = 0;
-	struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
-	void __iomem *div_addr = divider->base + divider->offset;
-
-	if (divider->lock)
-		spin_lock_irqsave(divider->lock, flags);
-	else
-		__acquire(divider->lock);
-
-	value = DIV_ROUND_CLOSEST(parent_rate, rate);
-
-	/* Cap the value to max */
-	min_t(u32, value, WZRD_DR_MAX_INT_DIV_VALUE);
-
-	/* Set divisor and clear phase offset */
-	writel(value, div_addr);
-	writel(0x00, div_addr + WZRD_DR_DIV_TO_PHASE_OFFSET);
-
-	/* Check status register */
-	err = readl_poll_timeout(divider->base + WZRD_DR_STATUS_REG_OFFSET,
-				 value, value & WZRD_DR_LOCK_BIT_MASK,
-				 WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
-	if (err)
-		goto err_reconfig;
-
-	/* Initiate reconfiguration */
-	writel(WZRD_DR_BEGIN_DYNA_RECONF,
-	       divider->base + WZRD_DR_INIT_REG_OFFSET);
-
-	/* Check status register */
-	err = readl_poll_timeout(divider->base + WZRD_DR_STATUS_REG_OFFSET,
-				 value, value & WZRD_DR_LOCK_BIT_MASK,
-				 WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
-err_reconfig:
-	if (divider->lock)
-		spin_unlock_irqrestore(divider->lock, flags);
-	else
-		__release(divider->lock);
-	return err;
-}
-
-static long clk_wzrd_round_rate(struct clk_hw *hw, unsigned long rate,
-				unsigned long *prate)
-{
-	u8 div;
-
-	/*
-	 * since we don't change parent rate we just round rate to closest
-	 * achievable
-	 */
-	div = DIV_ROUND_CLOSEST(*prate, rate);
-
-	return *prate / div;
-}
-
-static const struct clk_ops clk_wzrd_clk_divider_ops = {
-	.round_rate = clk_wzrd_round_rate,
-	.set_rate = clk_wzrd_dynamic_reconfig,
-	.recalc_rate = clk_wzrd_recalc_rate,
-};
-
-static unsigned long clk_wzrd_recalc_ratef(struct clk_hw *hw,
-					   unsigned long parent_rate)
-{
-	unsigned int val;
-	u32 div, frac;
-	struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
-	void __iomem *div_addr = divider->base + divider->offset;
-
-	val = readl(div_addr);
-	div = val & div_mask(divider->width);
-	frac = (val >> WZRD_CLKOUT_FRAC_SHIFT) & WZRD_CLKOUT_FRAC_MASK;
-
-	return mult_frac(parent_rate, 1000, (div * 1000) + frac);
-}
-
-static int clk_wzrd_dynamic_reconfig_f(struct clk_hw *hw, unsigned long rate,
-				       unsigned long parent_rate)
-{
-	int err;
-	u32 value, pre;
-	unsigned long rate_div, f, clockout0_div;
-	struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
-	void __iomem *div_addr = divider->base + divider->offset;
-
-	rate_div = ((parent_rate * 1000) / rate);
-	clockout0_div = rate_div / 1000;
-
-	pre = DIV_ROUND_CLOSEST((parent_rate * 1000), rate);
-	f = (u32)(pre - (clockout0_div * 1000));
-	f = f & WZRD_CLKOUT_FRAC_MASK;
-	f = f << WZRD_CLKOUT_DIVIDE_WIDTH;
-
-	value = (f  | (clockout0_div & WZRD_CLKOUT_DIVIDE_MASK));
-
-	/* Set divisor and clear phase offset */
-	writel(value, div_addr);
-	writel(0x0, div_addr + WZRD_DR_DIV_TO_PHASE_OFFSET);
-
-	/* Check status register */
-	err = readl_poll_timeout(divider->base + WZRD_DR_STATUS_REG_OFFSET, value,
-				 value & WZRD_DR_LOCK_BIT_MASK,
-				 WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
-	if (err)
-		return err;
-
-	/* Initiate reconfiguration */
-	writel(WZRD_DR_BEGIN_DYNA_RECONF,
-	       divider->base + WZRD_DR_INIT_REG_OFFSET);
-
-	/* Check status register */
-	return readl_poll_timeout(divider->base + WZRD_DR_STATUS_REG_OFFSET, value,
-				value & WZRD_DR_LOCK_BIT_MASK,
-				WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
-}
-
-static long clk_wzrd_round_rate_f(struct clk_hw *hw, unsigned long rate,
-				  unsigned long *prate)
-{
-	return rate;
-}
-
-static const struct clk_ops clk_wzrd_clk_divider_ops_f = {
-	.round_rate = clk_wzrd_round_rate_f,
-	.set_rate = clk_wzrd_dynamic_reconfig_f,
-	.recalc_rate = clk_wzrd_recalc_ratef,
-};
-
-static struct clk *clk_wzrd_register_divf(struct device *dev,
-					  const char *name,
-					  const char *parent_name,
-					  unsigned long flags,
-					  void __iomem *base, u16 offset,
-					  u8 shift, u8 width,
-					  u8 clk_divider_flags,
-					  const struct clk_div_table *table,
-					  spinlock_t *lock)
-{
-	struct clk_wzrd_divider *div;
-	struct clk_hw *hw;
-	struct clk_init_data init;
-	int ret;
-
-	div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
-	if (!div)
-		return ERR_PTR(-ENOMEM);
-
-	init.name = name;
-
-	init.ops = &clk_wzrd_clk_divider_ops_f;
-
-	init.flags = flags;
-	init.parent_names = &parent_name;
-	init.num_parents = 1;
-
-	div->base = base;
-	div->offset = offset;
-	div->shift = shift;
-	div->width = width;
-	div->flags = clk_divider_flags;
-	div->lock = lock;
-	div->hw.init = &init;
-	div->table = table;
-
-	hw = &div->hw;
-	ret =  devm_clk_hw_register(dev, hw);
-	if (ret)
-		return ERR_PTR(ret);
-
-	return hw->clk;
-}
-
-static struct clk *clk_wzrd_register_divider(struct device *dev,
-					     const char *name,
-					     const char *parent_name,
-					     unsigned long flags,
-					     void __iomem *base, u16 offset,
-					     u8 shift, u8 width,
-					     u8 clk_divider_flags,
-					     const struct clk_div_table *table,
-					     spinlock_t *lock)
-{
-	struct clk_wzrd_divider *div;
-	struct clk_hw *hw;
-	struct clk_init_data init;
-	int ret;
-
-	div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
-	if (!div)
-		return ERR_PTR(-ENOMEM);
-
-	init.name = name;
-	init.ops = &clk_wzrd_clk_divider_ops;
-	init.flags = flags;
-	init.parent_names =  &parent_name;
-	init.num_parents =  1;
-
-	div->base = base;
-	div->offset = offset;
-	div->shift = shift;
-	div->width = width;
-	div->flags = clk_divider_flags;
-	div->lock = lock;
-	div->hw.init = &init;
-	div->table = table;
-
-	hw = &div->hw;
-	ret = devm_clk_hw_register(dev, hw);
-	if (ret)
-		hw = ERR_PTR(ret);
-
-	return hw->clk;
-}
-
-static int clk_wzrd_clk_notifier(struct notifier_block *nb, unsigned long event,
-				 void *data)
-{
-	unsigned long max;
-	struct clk_notifier_data *ndata = data;
-	struct clk_wzrd *clk_wzrd = to_clk_wzrd(nb);
-
-	if (clk_wzrd->suspended)
-		return NOTIFY_OK;
-
-	if (ndata->clk == clk_wzrd->clk_in1)
-		max = clk_wzrd_max_freq[clk_wzrd->speed_grade - 1];
-	else if (ndata->clk == clk_wzrd->axi_clk)
-		max = WZRD_ACLK_MAX_FREQ;
-	else
-		return NOTIFY_DONE;	/* should never happen */
-
-	switch (event) {
-	case PRE_RATE_CHANGE:
-		if (ndata->new_rate > max)
-			return NOTIFY_BAD;
-		return NOTIFY_OK;
-	case POST_RATE_CHANGE:
-	case ABORT_RATE_CHANGE:
-	default:
-		return NOTIFY_DONE;
-	}
-}
-
-static int __maybe_unused clk_wzrd_suspend(struct device *dev)
-{
-	struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev);
-
-	clk_disable_unprepare(clk_wzrd->axi_clk);
-	clk_wzrd->suspended = true;
-
-	return 0;
-}
-
-static int __maybe_unused clk_wzrd_resume(struct device *dev)
-{
-	int ret;
-	struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev);
-
-	ret = clk_prepare_enable(clk_wzrd->axi_clk);
-	if (ret) {
-		dev_err(dev, "unable to enable s_axi_aclk\n");
-		return ret;
-	}
-
-	clk_wzrd->suspended = false;
-
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(clk_wzrd_dev_pm_ops, clk_wzrd_suspend,
-			 clk_wzrd_resume);
-
-static int clk_wzrd_probe(struct platform_device *pdev)
-{
-	int i, ret;
-	u32 reg, reg_f, mult;
-	unsigned long rate;
-	const char *clk_name;
-	void __iomem *ctrl_reg;
-	struct clk_wzrd *clk_wzrd;
-	struct device_node *np = pdev->dev.of_node;
-	int nr_outputs;
-	unsigned long flags = 0;
-
-	clk_wzrd = devm_kzalloc(&pdev->dev, sizeof(*clk_wzrd), GFP_KERNEL);
-	if (!clk_wzrd)
-		return -ENOMEM;
-	platform_set_drvdata(pdev, clk_wzrd);
-
-	clk_wzrd->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(clk_wzrd->base))
-		return PTR_ERR(clk_wzrd->base);
-
-	ret = of_property_read_u32(np, "xlnx,speed-grade", &clk_wzrd->speed_grade);
-	if (!ret) {
-		if (clk_wzrd->speed_grade < 1 || clk_wzrd->speed_grade > 3) {
-			dev_warn(&pdev->dev, "invalid speed grade '%d'\n",
-				 clk_wzrd->speed_grade);
-			clk_wzrd->speed_grade = 0;
-		}
-	}
-
-	clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1");
-	if (IS_ERR(clk_wzrd->clk_in1)) {
-		if (clk_wzrd->clk_in1 != ERR_PTR(-EPROBE_DEFER))
-			dev_err(&pdev->dev, "clk_in1 not found\n");
-		return PTR_ERR(clk_wzrd->clk_in1);
-	}
-
-	clk_wzrd->axi_clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
-	if (IS_ERR(clk_wzrd->axi_clk)) {
-		if (clk_wzrd->axi_clk != ERR_PTR(-EPROBE_DEFER))
-			dev_err(&pdev->dev, "s_axi_aclk not found\n");
-		return PTR_ERR(clk_wzrd->axi_clk);
-	}
-	ret = clk_prepare_enable(clk_wzrd->axi_clk);
-	if (ret) {
-		dev_err(&pdev->dev, "enabling s_axi_aclk failed\n");
-		return ret;
-	}
-	rate = clk_get_rate(clk_wzrd->axi_clk);
-	if (rate > WZRD_ACLK_MAX_FREQ) {
-		dev_err(&pdev->dev, "s_axi_aclk frequency (%lu) too high\n",
-			rate);
-		ret = -EINVAL;
-		goto err_disable_clk;
-	}
-
-	reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0));
-	reg_f = reg & WZRD_CLKFBOUT_FRAC_MASK;
-	reg_f =  reg_f >> WZRD_CLKFBOUT_FRAC_SHIFT;
-
-	reg = reg & WZRD_CLKFBOUT_MULT_MASK;
-	reg =  reg >> WZRD_CLKFBOUT_MULT_SHIFT;
-	mult = (reg * 1000) + reg_f;
-	clk_name = kasprintf(GFP_KERNEL, "%s_mul", dev_name(&pdev->dev));
-	if (!clk_name) {
-		ret = -ENOMEM;
-		goto err_disable_clk;
-	}
-
-	ret = of_property_read_u32(np, "nr-outputs", &nr_outputs);
-	if (ret || nr_outputs > WZRD_NUM_OUTPUTS) {
-		ret = -EINVAL;
-		goto err_disable_clk;
-	}
-	if (nr_outputs == 1)
-		flags = CLK_SET_RATE_PARENT;
-
-	clk_wzrd->clks_internal[wzrd_clk_mul] = clk_register_fixed_factor
-			(&pdev->dev, clk_name,
-			 __clk_get_name(clk_wzrd->clk_in1),
-			0, mult, 1000);
-	if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul])) {
-		dev_err(&pdev->dev, "unable to register fixed-factor clock\n");
-		ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul]);
-		goto err_disable_clk;
-	}
-
-	clk_name = kasprintf(GFP_KERNEL, "%s_mul_div", dev_name(&pdev->dev));
-	if (!clk_name) {
-		ret = -ENOMEM;
-		goto err_rm_int_clk;
-	}
-
-	ctrl_reg = clk_wzrd->base + WZRD_CLK_CFG_REG(0);
-	/* register div */
-	clk_wzrd->clks_internal[wzrd_clk_mul_div] = clk_register_divider
-			(&pdev->dev, clk_name,
-			 __clk_get_name(clk_wzrd->clks_internal[wzrd_clk_mul]),
-			flags, ctrl_reg, 0, 8, CLK_DIVIDER_ONE_BASED |
-			CLK_DIVIDER_ALLOW_ZERO, &clkwzrd_lock);
-	if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div])) {
-		dev_err(&pdev->dev, "unable to register divider clock\n");
-		ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div]);
-		goto err_rm_int_clk;
-	}
-
-	/* register div per output */
-	for (i = nr_outputs - 1; i >= 0 ; i--) {
-		const char *clkout_name;
-
-		clkout_name = kasprintf(GFP_KERNEL, "%s_out%d", dev_name(&pdev->dev), i);
-		if (!clkout_name) {
-			ret = -ENOMEM;
-			goto err_rm_int_clk;
-		}
-
-		if (!i)
-			clk_wzrd->clkout[i] = clk_wzrd_register_divf
-				(&pdev->dev, clkout_name,
-				clk_name, flags,
-				clk_wzrd->base, (WZRD_CLK_CFG_REG(2) + i * 12),
-				WZRD_CLKOUT_DIVIDE_SHIFT,
-				WZRD_CLKOUT_DIVIDE_WIDTH,
-				CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
-				NULL, &clkwzrd_lock);
-		else
-			clk_wzrd->clkout[i] = clk_wzrd_register_divider
-				(&pdev->dev, clkout_name,
-				clk_name, 0,
-				clk_wzrd->base, (WZRD_CLK_CFG_REG(2) + i * 12),
-				WZRD_CLKOUT_DIVIDE_SHIFT,
-				WZRD_CLKOUT_DIVIDE_WIDTH,
-				CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
-				NULL, &clkwzrd_lock);
-		if (IS_ERR(clk_wzrd->clkout[i])) {
-			int j;
-
-			for (j = i + 1; j < nr_outputs; j++)
-				clk_unregister(clk_wzrd->clkout[j]);
-			dev_err(&pdev->dev,
-				"unable to register divider clock\n");
-			ret = PTR_ERR(clk_wzrd->clkout[i]);
-			goto err_rm_int_clks;
-		}
-	}
-
-	kfree(clk_name);
-
-	clk_wzrd->clk_data.clks = clk_wzrd->clkout;
-	clk_wzrd->clk_data.clk_num = ARRAY_SIZE(clk_wzrd->clkout);
-	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_wzrd->clk_data);
-
-	if (clk_wzrd->speed_grade) {
-		clk_wzrd->nb.notifier_call = clk_wzrd_clk_notifier;
-
-		ret = clk_notifier_register(clk_wzrd->clk_in1,
-					    &clk_wzrd->nb);
-		if (ret)
-			dev_warn(&pdev->dev,
-				 "unable to register clock notifier\n");
-
-		ret = clk_notifier_register(clk_wzrd->axi_clk, &clk_wzrd->nb);
-		if (ret)
-			dev_warn(&pdev->dev,
-				 "unable to register clock notifier\n");
-	}
-
-	return 0;
-
-err_rm_int_clks:
-	clk_unregister(clk_wzrd->clks_internal[1]);
-err_rm_int_clk:
-	kfree(clk_name);
-	clk_unregister(clk_wzrd->clks_internal[0]);
-err_disable_clk:
-	clk_disable_unprepare(clk_wzrd->axi_clk);
-
-	return ret;
-}
-
-static int clk_wzrd_remove(struct platform_device *pdev)
-{
-	int i;
-	struct clk_wzrd *clk_wzrd = platform_get_drvdata(pdev);
-
-	of_clk_del_provider(pdev->dev.of_node);
-
-	for (i = 0; i < WZRD_NUM_OUTPUTS; i++)
-		clk_unregister(clk_wzrd->clkout[i]);
-	for (i = 0; i < wzrd_clk_int_max; i++)
-		clk_unregister(clk_wzrd->clks_internal[i]);
-
-	if (clk_wzrd->speed_grade) {
-		clk_notifier_unregister(clk_wzrd->axi_clk, &clk_wzrd->nb);
-		clk_notifier_unregister(clk_wzrd->clk_in1, &clk_wzrd->nb);
-	}
-
-	clk_disable_unprepare(clk_wzrd->axi_clk);
-
-	return 0;
-}
-
-static const struct of_device_id clk_wzrd_ids[] = {
-	{ .compatible = "xlnx,clocking-wizard" },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, clk_wzrd_ids);
-
-static struct platform_driver clk_wzrd_driver = {
-	.driver = {
-		.name = "clk-wizard",
-		.of_match_table = clk_wzrd_ids,
-		.pm = &clk_wzrd_dev_pm_ops,
-	},
-	.probe = clk_wzrd_probe,
-	.remove = clk_wzrd_remove,
-};
-module_platform_driver(clk_wzrd_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com");
-MODULE_DESCRIPTION("Driver for the Xilinx Clocking Wizard IP core");
diff --git a/drivers/staging/clocking-wizard/dt-binding.txt b/drivers/staging/clocking-wizard/dt-binding.txt
deleted file mode 100644
index efb67ff9f76c..000000000000
--- a/drivers/staging/clocking-wizard/dt-binding.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Binding for Xilinx Clocking Wizard IP Core
-
-This binding uses the common clock binding[1]. Details about the devices can be
-found in the product guide[2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Clocking Wizard Product Guide
-https://www.xilinx.com/support/documentation/ip_documentation/clk_wiz/v5_1/pg065-clk-wiz.pdf
-
-Required properties:
- - compatible: Must be 'xlnx,clocking-wizard'
- - reg: Base and size of the cores register space
- - clocks: Handle to input clock
- - clock-names: Tuple containing 'clk_in1' and 's_axi_aclk'
- - clock-output-names: Names for the output clocks
-
-Optional properties:
- - speed-grade: Speed grade of the device (valid values are 1..3)
-
-Example:
-	clock-generator@40040000 {
-		reg = <0x40040000 0x1000>;
-		compatible = "xlnx,clocking-wizard";
-		speed-grade = <1>;
-		clock-names = "clk_in1", "s_axi_aclk";
-		clocks = <&clkc 15>, <&clkc 15>;
-		clock-output-names = "clk_out0", "clk_out1", "clk_out2",
-				     "clk_out3", "clk_out4", "clk_out5",
-				     "clk_out6", "clk_out7";
-	};