diff options
| author | Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> | 2018-07-30 14:50:08 +0300 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2018-07-30 14:24:20 +0100 |
| commit | 410e8b4f5ca34e026ffc460a86e2354febe06fac (patch) | |
| tree | eb174e815d8840dda1b5ddc3e8333987c030f8d9 /drivers/regulator | |
| parent | 4f919ca2bf6da826ba1a4316e1b8e9c94e5dbeb2 (diff) | |
regulator: bd71837: adobt MFD changes to regulator driver
MFD part for bd71837 was changed during the review. Clean regulator part to
match changed MFD:
- renamed header file => fix include
- remove unused platdata as also type definition was removed
- Kconfig option for MFD part was changed => fix depends on clause
- Rename Kconfig option for regulators
As Kconfig option for regulators gets now used (when dependency to MFD is
satisfied) change it so that it won't require new change when support for
bd71847 is added.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 2 | ||||
| -rw-r--r-- | drivers/regulator/bd71837-regulator.c | 7 |
3 files changed, 4 insertions, 9 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 8233dc7f0a68..347351e79b1e 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -180,9 +180,9 @@ config REGULATOR_BCM590XX BCM590xx PMUs. This will enable support for the software controllable LDO/Switching regulators. -config REGULATOR_BD71837 +config REGULATOR_BD718XX tristate "ROHM BD71837 Power Regulator" - depends on MFD_BD71837 + depends on MFD_ROHM_BD718XX help This driver supports voltage regulators on ROHM BD71837 PMIC. This will enable support for the software controllable buck diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index b7839f41591e..18bfed61e7fe 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -27,7 +27,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o -obj-$(CONFIG_REGULATOR_BD71837) += bd71837-regulator.o +obj-$(CONFIG_REGULATOR_BD718XX) += bd71837-regulator.o obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o diff --git a/drivers/regulator/bd71837-regulator.c b/drivers/regulator/bd71837-regulator.c index 3a487255482c..0f8ac8dec3e1 100644 --- a/drivers/regulator/bd71837-regulator.c +++ b/drivers/regulator/bd71837-regulator.c @@ -7,7 +7,7 @@ #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/kernel.h> -#include <linux/mfd/bd71837.h> +#include <linux/mfd/rohm-bd718x7.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> @@ -490,7 +490,6 @@ struct reg_init { static int bd71837_probe(struct platform_device *pdev) { struct bd71837_pmic *pmic; - struct bd71837_board *pdata; struct regulator_config config = { 0 }; struct reg_init pmic_regulator_inits[] = { { @@ -558,7 +557,6 @@ static int bd71837_probe(struct platform_device *pdev) goto err; } platform_set_drvdata(pdev, pmic); - pdata = dev_get_platdata(pmic->mfd->dev); /* Register LOCK release */ err = regmap_update_bits(pmic->mfd->regmap, BD71837_REG_REGLOCK, @@ -578,9 +576,6 @@ static int bd71837_probe(struct platform_device *pdev) desc = &pmic->descs[i]; - if (pdata) - config.init_data = pdata->init_data[i]; - config.dev = pdev->dev.parent; config.driver_data = pmic; config.regmap = pmic->mfd->regmap; |