diff options
| author | Daniel Golle <daniel@makrotopia.org> | 2024-06-01 01:35:03 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2024-06-05 10:21:31 +0100 |
| commit | 61578f67937881abf54c8bd258eb913312dbe4c1 (patch) | |
| tree | c88558c8a6823f3e7f56d56f421c650816a1eed5 /drivers/net/phy/aquantia/aquantia.h | |
| parent | c11d5dbbe73fa7b450aaa77bb18df86a9714b422 (diff) | |
net: phy: aquantia: add support for PHY LEDs
Aquantia Ethernet PHYs got 3 LED output pins which are typically used
to indicate link status and activity.
Add a minimal LED controller driver supporting the most common uses
with the 'netdev' trigger as well as software-driven forced control of
the LEDs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[ rework indentation, fix checkpatch error and improve some functions ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy/aquantia/aquantia.h')
| -rw-r--r-- | drivers/net/phy/aquantia/aquantia.h | 40 |
1 files changed, 40 insertions, 0 deletions
diff --git a/drivers/net/phy/aquantia/aquantia.h b/drivers/net/phy/aquantia/aquantia.h index c79b33d95628..c0e1fd9d7152 100644 --- a/drivers/net/phy/aquantia/aquantia.h +++ b/drivers/net/phy/aquantia/aquantia.h @@ -63,6 +63,28 @@ #define VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD BIT(6) #define VEND1_GLOBAL_CONTROL2_UP_RUN_STALL BIT(0) +#define VEND1_GLOBAL_LED_PROV 0xc430 +#define AQR_LED_PROV(x) (VEND1_GLOBAL_LED_PROV + (x)) +#define VEND1_GLOBAL_LED_PROV_LINK2500 BIT(14) +#define VEND1_GLOBAL_LED_PROV_LINK5000 BIT(15) +#define VEND1_GLOBAL_LED_PROV_FORCE_ON BIT(8) +#define VEND1_GLOBAL_LED_PROV_LINK10000 BIT(7) +#define VEND1_GLOBAL_LED_PROV_LINK1000 BIT(6) +#define VEND1_GLOBAL_LED_PROV_LINK100 BIT(5) +#define VEND1_GLOBAL_LED_PROV_RX_ACT BIT(3) +#define VEND1_GLOBAL_LED_PROV_TX_ACT BIT(2) +#define VEND1_GLOBAL_LED_PROV_ACT_STRETCH GENMASK(0, 1) + +#define VEND1_GLOBAL_LED_PROV_LINK_MASK (VEND1_GLOBAL_LED_PROV_LINK100 | \ + VEND1_GLOBAL_LED_PROV_LINK1000 | \ + VEND1_GLOBAL_LED_PROV_LINK10000 | \ + VEND1_GLOBAL_LED_PROV_LINK5000 | \ + VEND1_GLOBAL_LED_PROV_LINK2500) + +#define VEND1_GLOBAL_LED_DRIVE 0xc438 +#define VEND1_GLOBAL_LED_DRIVE_VDD BIT(1) +#define AQR_LED_DRIVE(x) (VEND1_GLOBAL_LED_DRIVE + (x)) + #define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL 0xc421 #define VEND1_THERMAL_PROV_LOW_TEMP_FAIL 0xc422 #define VEND1_THERMAL_PROV_HIGH_TEMP_WARN 0xc423 @@ -125,6 +147,8 @@ #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2 BIT(1) #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 BIT(0) +#define AQR_MAX_LEDS 3 + struct aqr107_hw_stat { const char *name; int reg; @@ -149,6 +173,7 @@ static const struct aqr107_hw_stat aqr107_hw_stats[] = { struct aqr107_priv { u64 sgmii_stats[AQR107_SGMII_STAT_SZ]; + unsigned long leds_active_low; }; #if IS_REACHABLE(CONFIG_HWMON) @@ -158,3 +183,18 @@ static inline int aqr_hwmon_probe(struct phy_device *phydev) { return 0; } #endif int aqr_firmware_load(struct phy_device *phydev); + +int aqr_phy_led_blink_set(struct phy_device *phydev, u8 index, + unsigned long *delay_on, + unsigned long *delay_off); +int aqr_phy_led_brightness_set(struct phy_device *phydev, + u8 index, enum led_brightness value); +int aqr_phy_led_hw_is_supported(struct phy_device *phydev, u8 index, + unsigned long rules); +int aqr_phy_led_hw_control_get(struct phy_device *phydev, u8 index, + unsigned long *rules); +int aqr_phy_led_hw_control_set(struct phy_device *phydev, u8 index, + unsigned long rules); +int aqr_phy_led_active_low_set(struct phy_device *phydev, int index, bool enable); +int aqr_phy_led_polarity_set(struct phy_device *phydev, int index, + unsigned long modes); |