diff options
| author | Piotr Gardocki <piotrx.gardocki@intel.com> | 2023-11-21 22:47:15 -0500 |
|---|---|---|
| committer | Tony Nguyen <anthony.l.nguyen@intel.com> | 2023-12-12 11:20:40 -0800 |
| commit | 3a0b5a2929fdeda63fc921c2dbed237059acf732 (patch) | |
| tree | b0f74caea8d0e221103bb4730e1ff0d1bf946f1f /drivers/net/ethernet/intel/iavf/iavf.h | |
| parent | 810c38a369a0a0ce625b5c12169abce1dd9ccd53 (diff) | |
iavf: Introduce new state machines for flow director
New states introduced:
IAVF_FDIR_FLTR_DIS_REQUEST
IAVF_FDIR_FLTR_DIS_PENDING
IAVF_FDIR_FLTR_INACTIVE
Current FDIR state machines (SM) are not adequate to handle a few
scenarios in the link DOWN/UP event, reset event and ntuple-feature.
For example, when VF link goes DOWN and comes back UP administratively,
the expectation is that previously installed filters should also be
restored. But with current SM, filters are not restored.
So with new SM, during link DOWN filters are marked as INACTIVE in
the iavf list but removed from PF. After link UP, SM will transition
from INACTIVE to ADD_REQUEST to restore the filter.
Similarly, with VF reset, filters will be removed from the PF, but
marked as INACTIVE in the iavf list. Filters will be restored after
reset completion.
Steps to reproduce:
-------------------
1. Create a VF. Here VF is enp8s0.
2. Assign IP addresses to VF and link partner and ping continuously
from remote. Here remote IP is 1.1.1.1.
3. Check default RX Queue of traffic.
ethtool -S enp8s0 | grep -E "rx-[[:digit:]]+\.packets"
4. Add filter - change default RX Queue (to 15 here)
ethtool -U ens8s0 flow-type ip4 src-ip 1.1.1.1 action 15 loc 5
5. Ensure filter gets added and traffic is received on RX queue 15 now.
Link event testing:
-------------------
6. Bring VF link down and up. If traffic flows to configured queue 15,
test is success, otherwise it is a failure.
Reset event testing:
--------------------
7. Reset the VF. If traffic flows to configured queue 15, test is success,
otherwise it is a failure.
Fixes: 0dbfbabb840d ("iavf: Add framework to enable ethtool ntuple filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Ranganatha Rao <ranganatha.rao@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/iavf/iavf.h')
| -rw-r--r-- | drivers/net/ethernet/intel/iavf/iavf.h | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/iavf/iavf.h b/drivers/net/ethernet/intel/iavf/iavf.h index e7ab89dc883a..63b45c61cc4a 100644 --- a/drivers/net/ethernet/intel/iavf/iavf.h +++ b/drivers/net/ethernet/intel/iavf/iavf.h @@ -292,6 +292,7 @@ struct iavf_adapter { #define IAVF_FLAG_QUEUES_DISABLED BIT(17) #define IAVF_FLAG_SETUP_NETDEV_FEATURES BIT(18) #define IAVF_FLAG_REINIT_MSIX_NEEDED BIT(20) +#define IAVF_FLAG_FDIR_ENABLED BIT(21) /* duplicates for common code */ #define IAVF_FLAG_DCB_ENABLED 0 /* flags for admin queue service task */ |