summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw/nand_base.c
diff options
context:
space:
mode:
authorMiquel Raynal <miquel.raynal@bootlin.com>2021-05-05 23:37:46 +0200
committerMiquel Raynal <miquel.raynal@bootlin.com>2021-05-26 10:52:43 +0200
commita9ecc8c814e9600836e00cb592f1cb5378393126 (patch)
tree5fe00e8225ca4bc7d010cac6145f47f277600a58 /drivers/mtd/nand/raw/nand_base.c
parent9d3194bf2aef81c04177ab6bbe50406aa8d550dc (diff)
mtd: rawnand: Choose the best timings, NV-DDR included
Now that the necessary peaces to support the NV-DDR interface type have been contributed, let's add the relevant logic to make use of it. In particular, the core does not choose the best SDR timings anymore but calls a more generic helper instead. This helper checks if NV-DDR is supported by trying to find the best NV-DDR supported mode through a logic very close to what is being done for SDR timings. If no NV-DDR mode in common between the NAND controller and the NAND chip is found, the core will fallback to SDR. Side note: theoretically, the data clock speed in NV-DDR mode 0 is slower than in SDR mode 5. In the situation where we would get a working NV-DDR mode 0, we could also try if SDR mode 5 is supported and eventually fallback to it in order to get the fastest possible throughput. However, in the field, it looks like most of the devices supporting NV-DDR avoid implementing the fastest SDR modes (like 4 and 5 EDO modes, which are a bit more complicated to handle than the other SDR modes). So, we will stick to the simplest logic: try NV-DDR otherwise fallback to SDR. If someone else experiences strong differences because of that we may still implement the logic defined above. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210505213750.257417-19-miquel.raynal@bootlin.com
Diffstat (limited to 'drivers/mtd/nand/raw/nand_base.c')
-rw-r--r--drivers/mtd/nand/raw/nand_base.c76
1 files changed, 75 insertions, 1 deletions
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index e20551cb3ce5..22974a53077f 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -962,6 +962,80 @@ int nand_choose_best_sdr_timings(struct nand_chip *chip,
}
/**
+ * nand_choose_best_nvddr_timings - Pick up the best NVDDR timings that both the
+ * NAND controller and the NAND chip support
+ * @chip: the NAND chip
+ * @iface: the interface configuration (can eventually be updated)
+ * @spec_timings: specific timings, when not fitting the ONFI specification
+ *
+ * If specific timings are provided, use them. Otherwise, retrieve supported
+ * timing modes from ONFI information.
+ */
+int nand_choose_best_nvddr_timings(struct nand_chip *chip,
+ struct nand_interface_config *iface,
+ struct nand_nvddr_timings *spec_timings)
+{
+ const struct nand_controller_ops *ops = chip->controller->ops;
+ int best_mode = 0, mode, ret;
+
+ iface->type = NAND_NVDDR_IFACE;
+
+ if (spec_timings) {
+ iface->timings.nvddr = *spec_timings;
+ iface->timings.mode = onfi_find_closest_nvddr_mode(spec_timings);
+
+ /* Verify the controller supports the requested interface */
+ ret = ops->setup_interface(chip, NAND_DATA_IFACE_CHECK_ONLY,
+ iface);
+ if (!ret) {
+ chip->best_interface_config = iface;
+ return ret;
+ }
+
+ /* Fallback to slower modes */
+ best_mode = iface->timings.mode;
+ } else if (chip->parameters.onfi) {
+ best_mode = fls(chip->parameters.onfi->nvddr_timing_modes) - 1;
+ }
+
+ for (mode = best_mode; mode >= 0; mode--) {
+ onfi_fill_interface_config(chip, iface, NAND_NVDDR_IFACE, mode);
+
+ ret = ops->setup_interface(chip, NAND_DATA_IFACE_CHECK_ONLY,
+ iface);
+ if (!ret) {
+ chip->best_interface_config = iface;
+ break;
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * nand_choose_best_timings - Pick up the best NVDDR or SDR timings that both
+ * NAND controller and the NAND chip support
+ * @chip: the NAND chip
+ * @iface: the interface configuration (can eventually be updated)
+ *
+ * If specific timings are provided, use them. Otherwise, retrieve supported
+ * timing modes from ONFI information.
+ */
+static int nand_choose_best_timings(struct nand_chip *chip,
+ struct nand_interface_config *iface)
+{
+ int ret;
+
+ /* Try the fastest timings: NV-DDR */
+ ret = nand_choose_best_nvddr_timings(chip, iface, NULL);
+ if (!ret)
+ return 0;
+
+ /* Fallback to SDR timings otherwise */
+ return nand_choose_best_sdr_timings(chip, iface, NULL);
+}
+
+/**
* nand_choose_interface_config - find the best data interface and timings
* @chip: The NAND chip
*
@@ -989,7 +1063,7 @@ static int nand_choose_interface_config(struct nand_chip *chip)
if (chip->ops.choose_interface_config)
ret = chip->ops.choose_interface_config(chip, iface);
else
- ret = nand_choose_best_sdr_timings(chip, iface, NULL);
+ ret = nand_choose_best_timings(chip, iface);
if (ret)
kfree(iface);