diff options
author | James Morse <james.morse@arm.com> | 2024-05-29 14:34:41 +0100 |
---|---|---|
committer | Catalin Marinas <catalin.marinas@arm.com> | 2024-06-28 18:38:31 +0100 |
commit | d633da5d3ab1a0eb26a2213d65da1e189e82f8ab (patch) | |
tree | 77e082a9011938cd4839e3f8e2e4716fed775857 /drivers/irqchip/irq-gic-v3.c | |
parent | fa2dabe57220e6af78ed7a2f7016bf250a618204 (diff) |
irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs
To support virtual CPU hotplug, ACPI has added an 'online capable' bit
to the MADT GICC entries. This indicates a disabled CPU entry may not
be possible to online via PSCI until firmware has set enabled bit in
_STA.
This means that a "usable" GIC redistributor is one that is marked as
either enabled, or online capable. The meaning of the
acpi_gicc_is_usable() would become less clear than just checking the
pair of flags at call sites. As such, drop that helper function.
The test in gic_acpi_match_gicc() remains as testing just the
enabled bit so the count of enabled distributors is correct.
What about the redistributor in the GICC entry? ACPI doesn't want to say.
Assume the worst: When a redistributor is described in the GICC entry,
but the entry is marked as disabled at boot, assume the redistributor
is inaccessible.
The GICv3 driver doesn't support late online of redistributors, so this
means the corresponding CPU can't be brought online either.
Rather than modifying cpu masks that may already have been used,
register a new cpuhp callback to fail this case. This must run earlier
than the main gic_starting_cpu() so that this case can be rejected
before the section of cpuhp that runs on the CPU that is coming up as
that is not allowed to fail. This solution keeps the handling of this
broken firmware corner case local to the GIC driver. As precise ordering
of this callback doesn't need to be controlled as long as it is
in that initial prepare phase, use CPUHP_BP_PREPARE_DYN.
Systems that want CPU hotplug in a VM can ensure their redistributors
are always-on, and describe them that way with a GICR entry in the MADT.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240529133446.28446-15-Jonathan.Cameron@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Diffstat (limited to 'drivers/irqchip/irq-gic-v3.c')
-rw-r--r-- | drivers/irqchip/irq-gic-v3.c | 46 |
1 files changed, 42 insertions, 4 deletions
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index 10af15f93d4d..cc81515c1413 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -44,6 +44,8 @@ #define GIC_IRQ_TYPE_PARTITION (GIC_IRQ_TYPE_LPI + 1) +static struct cpumask broken_rdists __read_mostly; + struct redist_region { void __iomem *redist_base; phys_addr_t phys_base; @@ -1293,6 +1295,18 @@ static void gic_cpu_init(void) #define MPIDR_TO_SGI_RS(mpidr) (MPIDR_RS(mpidr) << ICC_SGI1R_RS_SHIFT) #define MPIDR_TO_SGI_CLUSTER_ID(mpidr) ((mpidr) & ~0xFUL) +/* + * gic_starting_cpu() is called after the last point where cpuhp is allowed + * to fail. So pre check for problems earlier. + */ +static int gic_check_rdist(unsigned int cpu) +{ + if (cpumask_test_cpu(cpu, &broken_rdists)) + return -EINVAL; + + return 0; +} + static int gic_starting_cpu(unsigned int cpu) { gic_cpu_init(); @@ -1384,6 +1398,10 @@ static void __init gic_smp_init(void) }; int base_sgi; + cpuhp_setup_state_nocalls(CPUHP_BP_PREPARE_DYN, + "irqchip/arm/gicv3:checkrdist", + gic_check_rdist, NULL); + cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_GIC_STARTING, "irqchip/arm/gicv3:starting", gic_starting_cpu, NULL); @@ -2365,8 +2383,24 @@ gic_acpi_parse_madt_gicc(union acpi_subtable_headers *header, u32 size = reg == GIC_PIDR2_ARCH_GICv4 ? SZ_64K * 4 : SZ_64K * 2; void __iomem *redist_base; - if (!acpi_gicc_is_usable(gicc)) + /* Neither enabled or online capable means it doesn't exist, skip it */ + if (!(gicc->flags & (ACPI_MADT_ENABLED | ACPI_MADT_GICC_ONLINE_CAPABLE))) + return 0; + + /* + * Capable but disabled CPUs can be brought online later. What about + * the redistributor? ACPI doesn't want to say! + * Virtual hotplug systems can use the MADT's "always-on" GICR entries. + * Otherwise, prevent such CPUs from being brought online. + */ + if (!(gicc->flags & ACPI_MADT_ENABLED)) { + int cpu = get_cpu_for_acpi_id(gicc->uid); + + pr_warn("CPU %u's redistributor is inaccessible: this CPU can't be brought online\n", cpu); + if (cpu >= 0) + cpumask_set_cpu(cpu, &broken_rdists); return 0; + } redist_base = ioremap(gicc->gicr_base_address, size); if (!redist_base) @@ -2413,9 +2447,12 @@ static int __init gic_acpi_match_gicc(union acpi_subtable_headers *header, /* * If GICC is enabled and has valid gicr base address, then it means - * GICR base is presented via GICC + * GICR base is presented via GICC. The redistributor is only known to + * be accessible if the GICC is marked as enabled. If this bit is not + * set, we'd need to add the redistributor at runtime, which isn't + * supported. */ - if (acpi_gicc_is_usable(gicc) && gicc->gicr_base_address) + if (gicc->flags & ACPI_MADT_ENABLED && gicc->gicr_base_address) acpi_data.enabled_rdists++; return 0; @@ -2474,7 +2511,8 @@ static int __init gic_acpi_parse_virt_madt_gicc(union acpi_subtable_headers *hea int maint_irq_mode; static int first_madt = true; - if (!acpi_gicc_is_usable(gicc)) + if (!(gicc->flags & + (ACPI_MADT_ENABLED | ACPI_MADT_GICC_ONLINE_CAPABLE))) return 0; maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ? |