i2c: move ACPI helpers into the core

This follows what has already been done for the DeviceTree helpers. Move
the ACPI helpers from drivers/acpi/acpi_i2c.c to the I2C core and update
documentation accordingly.

This also solves a problem reported by Jerry Snitselaar that we can't build
the ACPI I2C helpers as a module.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

2 files changed, 91 insertions, 1 deletions

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index ded77c3bd59c..6e99d9f56dee 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -171,7 +171,6 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failure adding adapter\n");
 		return r;
 	}
-	acpi_i2c_register_devices(adap);
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
 	pm_runtime_use_autosuspend(&pdev->dev);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index e874b052b4f8..29d3f045a2bf 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1058,6 +1058,96 @@ EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
 static void of_i2c_register_devices(struct i2c_adapter *adap) { }
 #endif /* CONFIG_OF */
 
+/* ACPI support code */
+
+#if IS_ENABLED(CONFIG_ACPI)
+static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
+{
+	struct i2c_board_info *info = data;
+
+	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		struct acpi_resource_i2c_serialbus *sb;
+
+		sb = &ares->data.i2c_serial_bus;
+		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+			info->addr = sb->slave_address;
+			if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+				info->flags |= I2C_CLIENT_TEN;
+		}
+	} else if (info->irq < 0) {
+		struct resource r;
+
+		if (acpi_dev_resource_interrupt(ares, 0, &r))
+			info->irq = r.start;
+	}
+
+	/* Tell the ACPI core to skip this resource */
+	return 1;
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct i2c_adapter *adapter = data;
+	struct list_head resource_list;
+	struct i2c_board_info info;
+	struct acpi_device *adev;
+	int ret;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+	if (acpi_bus_get_status(adev) || !adev->status.present)
+		return AE_OK;
+
+	memset(&info, 0, sizeof(info));
+	info.acpi_node.handle = handle;
+	info.irq = -1;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     acpi_i2c_add_resource, &info);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (ret < 0 || !info.addr)
+		return AE_OK;
+
+	strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
+	if (!i2c_new_device(adapter, &info)) {
+		dev_err(&adapter->dev,
+			"failed to add I2C device %s from ACPI\n",
+			dev_name(&adev->dev));
+	}
+
+	return AE_OK;
+}
+
+/**
+ * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * @adap: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+static void acpi_i2c_register_devices(struct i2c_adapter *adap)
+{
+	acpi_handle handle;
+	acpi_status status;
+
+	handle = ACPI_HANDLE(adap->dev.parent);
+	if (!handle)
+		return;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+				     acpi_i2c_add_device, NULL,
+				     adap, NULL);
+	if (ACPI_FAILURE(status))
+		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+}
+#else
+static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {}
+#endif /* CONFIG_ACPI */
+
 static int i2c_do_add_adapter(struct i2c_driver *driver,
 			      struct i2c_adapter *adap)
 {
@@ -1163,6 +1253,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 exit_recovery:
 	/* create pre-declared device nodes */
 	of_i2c_register_devices(adap);
+	acpi_i2c_register_devices(adap);
 
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);