diff options
| author | Florian Klink <flokli@flokli.de> | 2024-07-16 02:03:11 +0300 |
|---|---|---|
| committer | Florian Fainelli <florian.fainelli@broadcom.com> | 2024-10-08 15:01:51 -0700 |
| commit | dc7785e4723510616d776862ddb4c08857a1bdb2 (patch) | |
| tree | e31f63e7725d7b4973b4a3ebaa3441d71548cb8d /arch | |
| parent | 9852d85ec9d492ebef56dc5f229416c925758edc (diff) | |
ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pin
HDMI_HPD_N_1V8 is connected to GPIO pin 0, not 1.
This fixes HDMI hotplug/output detection.
See https://datasheets.raspberrypi.com/cm/cm3-schematics.pdf
Signed-off-by: Florian Klink <flokli@flokli.de>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240715230311.685641-1-flokli@flokli.de
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Fixes: a54fe8a6cf66 ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts index 72d26d130efa..85f54fa595aa 100644 --- a/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts +++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts @@ -77,7 +77,7 @@ }; &hdmi { - hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; + hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>; power-domains = <&power RPI_POWER_DOMAIN_HDMI>; status = "okay"; }; |