Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "There's one large change in the core clk framework here. We change how
  clk_set_rate_range() works so that the frequency is re-evaulated each
  time the rate is changed. Previously we wouldn't let clk providers see
  a rate that was different if it was still within the range, which
  could be bad for power if the clk could run slower when a range
  expands. Now the clk provider can decide to do something differently
  when the constraints change. This broke Nvidia's clk driver so we had
  to wait for the fix for that to bake a little more in -next.

  The rate range patch series also introduced a kunit suite for the clk
  framework that we're going to extend in the next release. It already
  made it easy to find corner cases in the rate range patches so I'm
  excited to see it cover more clk code and increase our confidence in
  core framework patches in the future. I also added a kunit test for
  the basic clk gate code and that work will continue to cover more
  basic clk types: muxes, dividers, etc.

  Beyond the core code we have the usual set of clk driver updates and
  additions. Qualcomm again dominates the diffstat here with lots more
  SoCs being supported and i.MX follows afer that with a similar number
  of SoCs gaining clk drivers. Beyond those large additions there's
  drivers being modernized to use clk_parent_data so we can move away
  from global string names for all the clks in an SoC. Finally there's
  lots of little fixes all over the clk drivers for typos, warnings, and
  missing clks that aren't critical and get batched up waiting for the
  next merge window to open. Nothing super big stands out in the driver
  pile. Full details are below.

  Core:
   - Make clk_set_rate_range() re-evaluate the limits each time
   - Introduce various clk_set_rate_range() tests
   - Add clk_drop_range() to drop a previously set range

  New Drivers:
   - i.MXRT1050 clock driver and bindings
   - i.MX8DXL clock driver and bindings
   - i.MX93 clock driver and bindings
   - NCO blocks on Apple SoCs
   - Audio clks on StarFive JH7100 RISC-V SoC
   - Add support for the new Renesas RZ/V2L SoC
   - Qualcomm SDX65 A7 PLL
   - Qualcomm SM6350 GPU clks
   - Qualcomm SM6125, SM6350, QCS2290 display clks
   - Qualcomm MSM8226 multimedia clks

  Updates:
   - Kunit tests for clk-gate implementation
   - Terminate arrays with sentinels and make that clearer
   - Cleanup SPDX tags
   - Fix typos in comments
   - Mark mux table as const in clk-mux
   - Make the all_lists array const
   - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding
     and add support for dynamic mode
   - Clock configuration on Microchip PolarFire SoCs
   - Free allocations on probe error in Mediatek clk driver
   - Modernize Mediatek clk driver by consolidating code
   - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks
     on Renesas R-Car S4-8
   - Improve the clocks for the Rockchip rk3568 display outputs
     (parenting, pll-rates)
   - Use of_device_get_match_data() instead of open-coding on Rockchip
     rk3568
   - Reintroduce the expected fractional-divider behaviour that
     disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
   - Remove SYS PLL 1/2 clock gates for i.MX8M*
   - Remove AUDIO MCLK ROOT from i.MX7D
   - Add fracn gppll clock type used by i.MX93
   - Add new composite clock for i.MX93
   - Add missing media mipi phy ref clock for i.MX8MP
   - Fix off by one in imx_lpcg_parse_clks_from_dt()
   - Rework for the imx pll14xx
   - sama7g5: One low priority fix for GCLK of PDMC
   - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
   - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
   - Add CAN-FD clocks on Renesas R-Car V3U
   - Qualcomm SC8280XP RPMCC
   - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
   - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to
     YAML
   - Convert various Qualcomm drivers to use clk_parent_data
   - Remove test clocks from various Qualcomm drivers
   - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
   - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
   - Better pixel clk frequency support on Qualcomm RCG2 clks"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
  clk: zynq: Update the parameters to zynq_clk_register_periph_clk
  clk: zynq: trivial warning fix
  clk: Drop the rate range on clk_put()
  clk: test: Test clk_set_rate_range on orphan mux
  clk: Initialize orphan req_rate
  dt-bindings: clock: drop useless consumer example
  dt-bindings: clock: renesas: Make example 'clocks' parsable
  clk: qcom: gcc-msm8994: Fix gpll4 width
  dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
  clk: rs9: Add Renesas 9-series PCIe clock generator driver
  clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
  clk: visconti: prevent array overflow in visconti_clk_register_gates()
  dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
  clk: sifive: Move all stuff into SoCs header files from C files
  clk: sifive: Add SoCs prefix in each SoCs-dependent data
  riscv: dts: Change the macro name of prci in each device node
  dt-bindings: change the macro name of prci in header files and example
  clk: sifive: duplicate the macro definitions for the time being
  clk: qcom: sm6125-gcc: fix typos in comments
  clk: ti: clkctrl: fix typos in comments
  ...

2 files changed, 24 insertions, 24 deletions

diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 3eef52b1a59b..aad45d7f498f 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -164,7 +164,7 @@
 			reg = <0x0 0x10010000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <4>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			status = "disabled";
 		};
 		dma: dma@3000000 {
@@ -180,7 +180,7 @@
 			reg = <0x0 0x10011000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <5>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			status = "disabled";
 		};
 		i2c0: i2c@10030000 {
@@ -188,7 +188,7 @@
 			reg = <0x0 0x10030000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <50>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			reg-shift = <2>;
 			reg-io-width = <1>;
 			#address-cells = <1>;
@@ -201,7 +201,7 @@
 			      <0x0 0x20000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <51>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -212,7 +212,7 @@
 			      <0x0 0x30000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <52>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -222,7 +222,7 @@
 			reg = <0x0 0x10050000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <6>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -235,8 +235,8 @@
 			      <0x0 0x100a0000 0x0 0x1000>;
 			local-mac-address = [00 00 00 00 00 00];
 			clock-names = "pclk", "hclk";
-			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
-				 <&prci PRCI_CLK_GEMGXLPLL>;
+			clocks = <&prci FU540_PRCI_CLK_GEMGXLPLL>,
+				 <&prci FU540_PRCI_CLK_GEMGXLPLL>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -246,7 +246,7 @@
 			reg = <0x0 0x10020000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <42>, <43>, <44>, <45>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
@@ -255,7 +255,7 @@
 			reg = <0x0 0x10021000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <46>, <47>, <48>, <49>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
@@ -281,7 +281,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
index 8464b0e3c887..7b77c13496d8 100644
--- a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
@@ -166,7 +166,7 @@
 			reg = <0x0 0x10010000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <39>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			status = "disabled";
 		};
 		uart1: serial@10011000 {
@@ -174,7 +174,7 @@
 			reg = <0x0 0x10011000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <40>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			status = "disabled";
 		};
 		i2c0: i2c@10030000 {
@@ -182,7 +182,7 @@
 			reg = <0x0 0x10030000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <52>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			reg-shift = <2>;
 			reg-io-width = <1>;
 			#address-cells = <1>;
@@ -194,7 +194,7 @@
 			reg = <0x0 0x10031000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <53>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			reg-shift = <2>;
 			reg-io-width = <1>;
 			#address-cells = <1>;
@@ -207,7 +207,7 @@
 			      <0x0 0x20000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <41>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -218,7 +218,7 @@
 			      <0x0 0x30000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <42>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -228,7 +228,7 @@
 			reg = <0x0 0x10050000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <43>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -241,8 +241,8 @@
 			      <0x0 0x100a0000 0x0 0x1000>;
 			local-mac-address = [00 00 00 00 00 00];
 			clock-names = "pclk", "hclk";
-			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
-				 <&prci PRCI_CLK_GEMGXLPLL>;
+			clocks = <&prci FU740_PRCI_CLK_GEMGXLPLL>,
+				 <&prci FU740_PRCI_CLK_GEMGXLPLL>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -252,7 +252,7 @@
 			reg = <0x0 0x10020000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <44>, <45>, <46>, <47>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
@@ -261,7 +261,7 @@
 			reg = <0x0 0x10021000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <48>, <49>, <50>, <51>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
@@ -287,7 +287,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			status = "disabled";
 		};
 		pcie@e00000000 {
@@ -316,7 +316,7 @@
 					<0x0 0x0 0x0 0x3 &plic0 59>,
 					<0x0 0x0 0x0 0x4 &plic0 60>;
 			clock-names = "pcie_aux";
-			clocks = <&prci PRCI_CLK_PCIE_AUX>;
+			clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
 			pwren-gpios = <&gpio 5 0>;
 			reset-gpios = <&gpio 8 0>;
 			resets = <&prci 4>;