diff options
author | Atsushi Nemoto <anemo@mba.ocn.ne.jp> | 2008-07-19 01:51:47 +0900 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2008-07-20 14:38:21 +0100 |
commit | 94a4c32939dede9328c6e4face335eb8441fc18d (patch) | |
tree | 0ac510bf3b90cb79fe94112b95dd77d96c190bf9 /arch/mips/txx9/rbtx4938 | |
parent | 255033a9bb900a06c9a7798908ce12557d24fb66 (diff) |
[MIPS] TXx9: Add 64-bit support
SYS_SUPPORTS_64BIT_KERNEL is enabled for RBTX4927/RBTX4938, but
actually it was broken for long time (or from the beginning). Now it
should work.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/txx9/rbtx4938')
-rw-r--r-- | arch/mips/txx9/rbtx4938/setup.c | 218 |
1 files changed, 8 insertions, 210 deletions
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index c1e076c7b2d2..6c2b99bb8af6 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -20,21 +20,14 @@ #include <linux/gpio.h> #include <asm/reboot.h> -#include <asm/time.h> -#include <asm/txx9tmr.h> #include <asm/io.h> #include <asm/txx9/generic.h> #include <asm/txx9/pci.h> #include <asm/txx9/rbtx4938.h> -#ifdef CONFIG_SERIAL_TXX9 -#include <linux/serial_core.h> -#endif #include <linux/spi/spi.h> #include <asm/txx9/spi.h> #include <asm/txx9pio.h> -static int tx4938_ccfg_toeon = 1; - static void rbtx4938_machine_halt(void) { printk(KERN_NOTICE "System Halted\n"); @@ -182,189 +175,10 @@ static void __init rbtx4938_spi_setup(void) } static struct resource rbtx4938_fpga_resource; -static struct resource tx4938_sdram_resource[4]; -static struct resource tx4938_sram_resource; - -void __init tx4938_board_setup(void) -{ - int i; - unsigned long divmode; - int cpuclk = 0; - unsigned long pcode = TX4938_REV_PCODE(); - - ioport_resource.start = 0; - ioport_resource.end = 0xffffffff; - iomem_resource.start = 0; - iomem_resource.end = 0xffffffff; /* expand to 4GB */ - - txx9_reg_res_init(pcode, TX4938_REG_BASE, - TX4938_REG_SIZE); - /* SDRAMC,EBUSC are configured by PROM */ - for (i = 0; i < 8; i++) { - if (!(TX4938_EBUSC_CR(i) & 0x8)) - continue; /* disabled */ - txx9_ce_res[i].start = (unsigned long)TX4938_EBUSC_BA(i); - txx9_ce_res[i].end = - txx9_ce_res[i].start + TX4938_EBUSC_SIZE(i) - 1; - request_resource(&iomem_resource, &txx9_ce_res[i]); - } - - /* clocks */ - if (txx9_master_clock) { - u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg); - /* calculate gbus_clock and cpu_clock_freq from master_clock */ - divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK; - switch (divmode) { - case TX4938_CCFG_DIVMODE_8: - case TX4938_CCFG_DIVMODE_10: - case TX4938_CCFG_DIVMODE_12: - case TX4938_CCFG_DIVMODE_16: - case TX4938_CCFG_DIVMODE_18: - txx9_gbus_clock = txx9_master_clock * 4; break; - default: - txx9_gbus_clock = txx9_master_clock; - } - switch (divmode) { - case TX4938_CCFG_DIVMODE_2: - case TX4938_CCFG_DIVMODE_8: - cpuclk = txx9_gbus_clock * 2; break; - case TX4938_CCFG_DIVMODE_2_5: - case TX4938_CCFG_DIVMODE_10: - cpuclk = txx9_gbus_clock * 5 / 2; break; - case TX4938_CCFG_DIVMODE_3: - case TX4938_CCFG_DIVMODE_12: - cpuclk = txx9_gbus_clock * 3; break; - case TX4938_CCFG_DIVMODE_4: - case TX4938_CCFG_DIVMODE_16: - cpuclk = txx9_gbus_clock * 4; break; - case TX4938_CCFG_DIVMODE_4_5: - case TX4938_CCFG_DIVMODE_18: - cpuclk = txx9_gbus_clock * 9 / 2; break; - } - txx9_cpu_clock = cpuclk; - } else { - u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg); - if (txx9_cpu_clock == 0) { - txx9_cpu_clock = 300000000; /* 300MHz */ - } - /* calculate gbus_clock and master_clock from cpu_clock_freq */ - cpuclk = txx9_cpu_clock; - divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK; - switch (divmode) { - case TX4938_CCFG_DIVMODE_2: - case TX4938_CCFG_DIVMODE_8: - txx9_gbus_clock = cpuclk / 2; break; - case TX4938_CCFG_DIVMODE_2_5: - case TX4938_CCFG_DIVMODE_10: - txx9_gbus_clock = cpuclk * 2 / 5; break; - case TX4938_CCFG_DIVMODE_3: - case TX4938_CCFG_DIVMODE_12: - txx9_gbus_clock = cpuclk / 3; break; - case TX4938_CCFG_DIVMODE_4: - case TX4938_CCFG_DIVMODE_16: - txx9_gbus_clock = cpuclk / 4; break; - case TX4938_CCFG_DIVMODE_4_5: - case TX4938_CCFG_DIVMODE_18: - txx9_gbus_clock = cpuclk * 2 / 9; break; - } - switch (divmode) { - case TX4938_CCFG_DIVMODE_8: - case TX4938_CCFG_DIVMODE_10: - case TX4938_CCFG_DIVMODE_12: - case TX4938_CCFG_DIVMODE_16: - case TX4938_CCFG_DIVMODE_18: - txx9_master_clock = txx9_gbus_clock / 4; break; - default: - txx9_master_clock = txx9_gbus_clock; - } - } - /* change default value to udelay/mdelay take reasonable time */ - loops_per_jiffy = txx9_cpu_clock / HZ / 2; - - /* CCFG */ - /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */ - tx4938_ccfg_set(TX4938_CCFG_WDRST | TX4938_CCFG_BEOW); - /* do reset on watchdog */ - tx4938_ccfg_set(TX4938_CCFG_WR); - /* clear PCIC1 reset */ - txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST); - - /* enable Timeout BusError */ - if (tx4938_ccfg_toeon) - tx4938_ccfg_set(TX4938_CCFG_TOE); - - /* DMA selection */ - txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_DMASEL_ALL); - - /* Use external clock for external arbiter */ - if (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB)) - txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_PCICLKEN_ALL); - - printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n", - txx9_pcode_str, - (cpuclk + 500000) / 1000000, - (txx9_master_clock + 500000) / 1000000, - (__u32)____raw_readq(&tx4938_ccfgptr->crir), - (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg), - (unsigned long long)____raw_readq(&tx4938_ccfgptr->pcfg)); - - printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str); - for (i = 0; i < 4; i++) { - u64 cr = TX4938_SDRAMC_CR(i); - unsigned long ram_base, ram_size; - if (!((unsigned long)cr & 0x00000400)) - continue; /* disabled */ - ram_base = (unsigned long)(cr >> 49) << 21; - ram_size = ((unsigned long)(cr >> 33) + 1) << 21; - if (ram_base >= 0x20000000) - continue; /* high memory (ignore) */ - printk(KERN_CONT " CR%d:%016llx", i, cr); - tx4938_sdram_resource[i].name = "SDRAM"; - tx4938_sdram_resource[i].start = ram_base; - tx4938_sdram_resource[i].end = ram_base + ram_size - 1; - tx4938_sdram_resource[i].flags = IORESOURCE_MEM; - request_resource(&iomem_resource, &tx4938_sdram_resource[i]); - } - printk(KERN_CONT " TR:%09llx\n", ____raw_readq(&tx4938_sdramcptr->tr)); - - /* SRAM */ - if (____raw_readq(&tx4938_sramcptr->cr) & 1) { - unsigned int size = 0x800; - unsigned long base = - (____raw_readq(&tx4938_sramcptr->cr) >> (39-11)) - & ~(size - 1); - tx4938_sram_resource.name = "SRAM"; - tx4938_sram_resource.start = base; - tx4938_sram_resource.end = base + size - 1; - tx4938_sram_resource.flags = IORESOURCE_MEM; - request_resource(&iomem_resource, &tx4938_sram_resource); - } - - /* TMR */ - for (i = 0; i < TX4938_NR_TMR; i++) - txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL); - - /* enable DMA */ - for (i = 0; i < 2; i++) - ____raw_writeq(TX4938_DMA_MCR_MSTEN, - (void __iomem *)(TX4938_DMA_REG(i) + 0x50)); - - /* PIO */ - __raw_writel(0, &tx4938_pioptr->maskcpu); - __raw_writel(0, &tx4938_pioptr->maskext); - -#ifdef CONFIG_PCI - txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0); -#endif -} static void __init rbtx4938_time_init(void) { - mips_hpt_frequency = txx9_cpu_clock / 2; - if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS) - txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL, - TXX9_IRQ_BASE + TX4938_IR_TMR(0), - txx9_gbus_clock / 2); + tx4938_time_init(0); } static void __init rbtx4938_mem_setup(void) @@ -372,39 +186,24 @@ static void __init rbtx4938_mem_setup(void) unsigned long long pcfg; char *argptr; - iomem_resource.end = 0xffffffff; /* 4GB */ - if (txx9_master_clock == 0) txx9_master_clock = 25000000; /* 25MHz */ - tx4938_board_setup(); -#ifndef CONFIG_PCI + + tx4938_setup(); + +#ifdef CONFIG_PCI + txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0); +#else set_io_port_base(RBTX4938_ETHER_BASE); #endif -#ifdef CONFIG_SERIAL_TXX9 - { - extern int early_serial_txx9_setup(struct uart_port *port); - int i; - struct uart_port req; - for(i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (char *)(0xff1ff300 + i * 0x100); - req.mapbase = 0xff1ff300 + i * 0x100; - req.irq = RBTX4938_IRQ_IRC_SIO(i); - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = 50000000; - early_serial_txx9_setup(&req); - } - } + tx4938_setup_serial(); #ifdef CONFIG_SERIAL_TXX9_CONSOLE argptr = prom_getcmdline(); if (strstr(argptr, "console=") == NULL) { strcat(argptr, " console=ttyS0,38400"); } #endif -#endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 printk("PIOSEL: disabling both ata and nand selection\n"); @@ -568,7 +367,6 @@ static int __init rbtx4938_spi_init(void) static void __init rbtx4938_arch_init(void) { - txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16); gpiochip_add(&rbtx4938_spi_gpio_chip); rbtx4938_pci_setup(); rbtx4938_spi_init(); |