ia64: remove the hpsim platform

The hpsim platform supports the HP IA64 simulator which was useful as a
bring up platform.  But it is fairly non-standard vs real IA64 system
in that it for example doesn't support ACPI.  It also comes with a
whole bunch of simulator specific drivers.  Remove it to simplify the
IA64 port.

Note that through a weird twist only them hpsim boot loader built the
vmlinux.gz file, so the makefile targets for that are moved to the
main ia64 Makefile now.

Acked-by: Tom Vaden <tom.vaden@hpe.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190813072514.23299-18-hch@lst.de
Signed-off-by: Tony Luck <tony.luck@intel.com>

17 files changed, 0 insertions, 2543 deletions

diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig
deleted file mode 100644
index 56fb4f1d4f7c..000000000000
--- a/arch/ia64/hp/sim/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-menu "HP Simulator drivers"
-	depends on IA64_HP_SIM || IA64_GENERIC
-
-config HP_SIMETH
-	bool "Simulated Ethernet "
-	depends on NET
-
-config HP_SIMSERIAL
-	bool "Simulated serial driver support"
-	depends on TTY
-
-config HP_SIMSERIAL_CONSOLE
-	bool "Console for HP simulator"
-	depends on HP_SIMSERIAL
-
-config HP_SIMSCSI
-	bool "Simulated SCSI disk"
-	depends on SCSI=y
-
-endmenu
-
diff --git a/arch/ia64/hp/sim/Makefile b/arch/ia64/hp/sim/Makefile
deleted file mode 100644
index 0224a13d2c5b..000000000000
--- a/arch/ia64/hp/sim/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# ia64/platform/hp/sim/Makefile
-#
-# Copyright (C) 2002 Hewlett-Packard Co.
-#	David Mosberger-Tang <davidm@hpl.hp.com>
-# Copyright (C) 1999 Silicon Graphics, Inc.
-# Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
-#
-
-obj-y := hpsim_irq.o hpsim_setup.o hpsim.o
-obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o
-
-obj-$(CONFIG_HP_SIMETH)	+= simeth.o
-obj-$(CONFIG_HP_SIMSERIAL) += simserial.o
-obj-$(CONFIG_HP_SIMSERIAL_CONSOLE) += hpsim_console.o
-obj-$(CONFIG_HP_SIMSCSI) += simscsi.o
diff --git a/arch/ia64/hp/sim/boot/Makefile b/arch/ia64/hp/sim/boot/Makefile
deleted file mode 100644
index df6e9968c845..000000000000
--- a/arch/ia64/hp/sim/boot/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# ia64/boot/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1998, 2003 by David Mosberger-Tang <davidm@hpl.hp.com>
-#
-
-targets-$(CONFIG_IA64_HP_SIM)  += bootloader
-targets := vmlinux.bin vmlinux.gz $(targets-y)
-
-quiet_cmd_cptotop = LN      $@
-      cmd_cptotop = ln -f $< $@
-
-vmlinux.gz: $(obj)/vmlinux.gz $(addprefix $(obj)/,$(targets-y))
-	$(call cmd,cptotop)
-	@echo '  Kernel: $@ is ready'
-
-boot: bootloader
-
-bootloader: $(obj)/bootloader
-	$(call cmd,cptotop)
-
-$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
-
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-
-LDFLAGS_bootloader = -static -T
-
-$(obj)/bootloader: $(src)/bootloader.lds $(obj)/bootloader.o $(obj)/boot_head.o $(obj)/fw-emu.o \
-                   lib/lib.a arch/ia64/lib/lib.a FORCE
-	$(call if_changed,ld)
diff --git a/arch/ia64/hp/sim/boot/boot_head.S b/arch/ia64/hp/sim/boot/boot_head.S
deleted file mode 100644
index a7d178fb41e8..000000000000
--- a/arch/ia64/hp/sim/boot/boot_head.S
+++ /dev/null
@@ -1,165 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1998-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <asm/asmmacro.h>
-#include <asm/pal.h>
-
-	.bss
-	.align 16
-stack_mem:
-	.skip 16834
-
-	.text
-
-/* This needs to be defined because lib/string.c:strlcat() calls it in case of error... */
-GLOBAL_ENTRY(printk)
-	break 0
-END(printk)
-
-GLOBAL_ENTRY(_start)
-	.prologue
-	.save rp, r0
-	.body
-	movl gp = __gp
-	movl sp = stack_mem+16384-16
-	bsw.1
-	br.call.sptk.many rp=start_bootloader
-0:	nop 0		  /* dummy nop to make unwinding work */
-END(_start)
-
-/*
- * Set a break point on this function so that symbols are available to set breakpoints in
- * the kernel being debugged.
- */
-GLOBAL_ENTRY(debug_break)
-	br.ret.sptk.many b0
-END(debug_break)
-
-GLOBAL_ENTRY(ssc)
-	.regstk 5,0,0,0
-	mov r15=in4
-	break 0x80001
-	br.ret.sptk.many b0
-END(ssc)
-
-GLOBAL_ENTRY(jmp_to_kernel)
-	.regstk 2,0,0,0
-	mov r28=in0
-	mov b7=in1
-	br.sptk.few b7
-END(jmp_to_kernel)
-
-/*
- * r28 contains the index of the PAL function
- * r29--31 the args
- * Return values in ret0--3 (r8--11)
- */
-GLOBAL_ENTRY(pal_emulator_static)
-	mov r8=-1
-	mov r9=256
-	;;
-	cmp.gtu p6,p7=r9,r28		/* r28 <= 255? */
-(p6)	br.cond.sptk.few static
-	;;
-	mov r9=512
-	;;
-	cmp.gtu p6,p7=r9,r28
-(p6)	br.cond.sptk.few stacked
-	;;
-static:	cmp.eq p6,p7=PAL_PTCE_INFO,r28
-(p7)	br.cond.sptk.few 1f
-	;;
-	mov r8=0			/* status = 0 */
-	movl r9=0x100000000		/* tc.base */
-	movl r10=0x0000000200000003	/* count[0], count[1] */
-	movl r11=0x1000000000002000	/* stride[0], stride[1] */
-	br.cond.sptk.few rp
-1:	cmp.eq p6,p7=PAL_FREQ_RATIOS,r28
-(p7)	br.cond.sptk.few 1f
-	mov r8=0			/* status = 0 */
-	movl r9 =0x100000064		/* proc_ratio (1/100) */
-	movl r10=0x100000100		/* bus_ratio<<32 (1/256) */
-	movl r11=0x100000064		/* itc_ratio<<32 (1/100) */
-	;;
-1:	cmp.eq p6,p7=PAL_RSE_INFO,r28
-(p7)	br.cond.sptk.few 1f
-	mov r8=0			/* status = 0 */
-	mov r9=96			/* num phys stacked */
-	mov r10=0			/* hints */
-	mov r11=0
-	br.cond.sptk.few rp
-1:	cmp.eq p6,p7=PAL_CACHE_FLUSH,r28		/* PAL_CACHE_FLUSH */
-(p7)	br.cond.sptk.few 1f
-	mov r9=ar.lc
-	movl r8=524288			/* flush 512k million cache lines (16MB) */
-	;;
-	mov ar.lc=r8
-	movl r8=0xe000000000000000
-	;;
-.loop:	fc r8
-	add r8=32,r8
-	br.cloop.sptk.few .loop
-	sync.i
-	;;
-	srlz.i
-	;;
-	mov ar.lc=r9
-	mov r8=r0
-	;;
-1:	cmp.eq p6,p7=PAL_PERF_MON_INFO,r28
-(p7)	br.cond.sptk.few 1f
-	mov r8=0			/* status = 0 */
-	movl r9 =0x08122f04		/* generic=4 width=47 retired=8 cycles=18 */
-	mov r10=0			/* reserved */
-	mov r11=0			/* reserved */
-	mov r16=0xffff			/* implemented PMC */
-	mov r17=0x3ffff			/* implemented PMD */
-	add r18=8,r29			/* second index */
-	;;
-	st8 [r29]=r16,16		/* store implemented PMC */
-	st8 [r18]=r0,16			/* clear remaining bits  */
-	;;
-	st8 [r29]=r0,16			/* clear remaining bits  */
-	st8 [r18]=r0,16			/* clear remaining bits  */
-	;;
-	st8 [r29]=r17,16		/* store implemented PMD */
-	st8 [r18]=r0,16			/* clear remaining bits  */
-	mov r16=0xf0			/* cycles count capable PMC */
-	;;
-	st8 [r29]=r0,16			/* clear remaining bits  */
-	st8 [r18]=r0,16			/* clear remaining bits  */
-	mov r17=0xf0			/* retired bundles capable PMC */
-	;;
-	st8 [r29]=r16,16		/* store cycles capable */
-	st8 [r18]=r0,16			/* clear remaining bits  */
-	;;
-	st8 [r29]=r0,16			/* clear remaining bits  */
-	st8 [r18]=r0,16			/* clear remaining bits  */
-	;;
-	st8 [r29]=r17,16		/* store retired bundle capable */
-	st8 [r18]=r0,16			/* clear remaining bits  */
-	;;
-	st8 [r29]=r0,16			/* clear remaining bits  */
-	st8 [r18]=r0,16			/* clear remaining bits  */
-	;;
-1:	cmp.eq p6,p7=PAL_VM_SUMMARY,r28
-(p7)	br.cond.sptk.few 1f
-	mov	r8=0			/* status = 0  */
-	movl	r9=0x2044040020F1865	/* num_tc_levels=2, num_unique_tcs=4 */
-					/* max_itr_entry=64, max_dtr_entry=64 */
-					/* hash_tag_id=2, max_pkr=15 */
-					/* key_size=24, phys_add_size=50, vw=1 */
-	movl	r10=0x183C		/* rid_size=24, impl_va_msb=60 */
-	;;
-1:	cmp.eq p6,p7=PAL_MEM_ATTRIB,r28
-(p7)	br.cond.sptk.few 1f
-	mov	r8=0			/* status = 0 */
-	mov	r9=0x80|0x01		/* NatPage|WB */
-	;;
-1:	br.cond.sptk.few rp
-stacked:
-	br.ret.sptk.few rp
-END(pal_emulator_static)
diff --git a/arch/ia64/hp/sim/boot/bootloader.c b/arch/ia64/hp/sim/boot/bootloader.c
deleted file mode 100644
index 6d804608dc81..000000000000
--- a/arch/ia64/hp/sim/boot/bootloader.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/ia64/hp/sim/boot/bootloader.c
- *
- * Loads an ELF kernel.
- *
- * Copyright (C) 1998-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *	Stephane Eranian <eranian@hpl.hp.com>
- *
- * 01/07/99 S.Eranian modified to pass command line arguments to kernel
- */
-struct task_struct;	/* forward declaration for elf.h */
-
-#include <linux/elf.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/elf.h>
-#include <asm/intrinsics.h>
-#include <asm/pal.h>
-#include <asm/pgtable.h>
-#include <asm/sal.h>
-
-#include "ssc.h"
-
-struct disk_req {
-	unsigned long addr;
-	unsigned len;
-};
-
-struct disk_stat {
-	int fd;
-	unsigned count;
-};
-
-extern void jmp_to_kernel (unsigned long bp, unsigned long e_entry);
-extern struct ia64_boot_param *sys_fw_init (const char *args, int arglen);
-extern void debug_break (void);
-
-static void
-cons_write (const char *buf)
-{
-	unsigned long ch;
-
-	while ((ch = *buf++) != '\0') {
-		ssc(ch, 0, 0, 0, SSC_PUTCHAR);
-		if (ch == '\n')
-		  ssc('\r', 0, 0, 0, SSC_PUTCHAR);
-	}
-}
-
-#define MAX_ARGS 32
-
-void
-start_bootloader (void)
-{
-	static char mem[4096];
-	static char buffer[1024];
-	unsigned long off;
-	int fd, i;
-	struct disk_req req;
-	struct disk_stat stat;
-	struct elfhdr *elf;
-	struct elf_phdr *elf_phdr;	/* program header */
-	unsigned long e_entry, e_phoff, e_phnum;
-	register struct ia64_boot_param *bp;
-	char *kpath, *args;
-	long arglen = 0;
-
-	ssc(0, 0, 0, 0, SSC_CONSOLE_INIT);
-
-	/*
-	 * S.Eranian: extract the commandline argument from the simulator
-	 *
-	 * The expected format is as follows:
-         *
-	 *	kernelname args...
-	 *
-	 * Both are optional but you can't have the second one without the first.
-	 */
-	arglen = ssc((long) buffer, 0, 0, 0, SSC_GET_ARGS);
-
-	kpath = "vmlinux";
-	args = buffer;
-	if (arglen > 0) {
-		kpath = buffer;
-		while (*args != ' ' && *args != '\0')
-			++args, --arglen;
-		if (*args == ' ')
-			*args++ = '\0', --arglen;
-	}
-
-	if (arglen <= 0) {
-		args = "";
-		arglen = 1;
-	}
-
-	fd = ssc((long) kpath, 1, 0, 0, SSC_OPEN);
-
-	if (fd < 0) {
-		cons_write(kpath);
-		cons_write(": file not found, reboot now\n");
-		for(;;);
-	}
-	stat.fd = fd;
-	off = 0;
-
-	req.len = sizeof(mem);
-	req.addr = (long) mem;
-	ssc(fd, 1, (long) &req, off, SSC_READ);
-	ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION);
-
-	elf = (struct elfhdr *) mem;
-	if (elf->e_ident[0] == 0x7f && strncmp(elf->e_ident + 1, "ELF", 3) != 0) {
-		cons_write("not an ELF file\n");
-		return;
-	}
-	if (elf->e_type != ET_EXEC) {
-		cons_write("not an ELF executable\n");
-		return;
-	}
-	if (!elf_check_arch(elf)) {
-		cons_write("kernel not for this processor\n");
-		return;
-	}
-
-	e_entry = elf->e_entry;
-	e_phnum = elf->e_phnum;
-	e_phoff = elf->e_phoff;
-
-	cons_write("loading ");
-	cons_write(kpath);
-	cons_write("...\n");
-
-	for (i = 0; i < e_phnum; ++i) {
-		req.len = sizeof(*elf_phdr);
-		req.addr = (long) mem;
-		ssc(fd, 1, (long) &req, e_phoff, SSC_READ);
-		ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION);
-		if (stat.count != sizeof(*elf_phdr)) {
-			cons_write("failed to read phdr\n");
-			return;
-		}
-		e_phoff += sizeof(*elf_phdr);
-
-		elf_phdr = (struct elf_phdr *) mem;
-
-		if (elf_phdr->p_type != PT_LOAD)
-			continue;
-
-		req.len = elf_phdr->p_filesz;
-		req.addr = __pa(elf_phdr->p_paddr);
-		ssc(fd, 1, (long) &req, elf_phdr->p_offset, SSC_READ);
-		ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION);
-		memset((char *)__pa(elf_phdr->p_paddr) + elf_phdr->p_filesz, 0,
-		       elf_phdr->p_memsz - elf_phdr->p_filesz);
-	}
-	ssc(fd, 0, 0, 0, SSC_CLOSE);
-
-	cons_write("starting kernel...\n");
-
-	/* fake an I/O base address: */
-	ia64_setreg(_IA64_REG_AR_KR0, 0xffffc000000UL);
-
-	bp = sys_fw_init(args, arglen);
-
-	ssc(0, (long) kpath, 0, 0, SSC_LOAD_SYMBOLS);
-
-	debug_break();
-	jmp_to_kernel((unsigned long) bp, e_entry);
-
-	cons_write("kernel returned!\n");
-	ssc(-1, 0, 0, 0, SSC_EXIT);
-}
diff --git a/arch/ia64/hp/sim/boot/bootloader.lds b/arch/ia64/hp/sim/boot/bootloader.lds
deleted file mode 100644
index f3f284d6514c..000000000000
--- a/arch/ia64/hp/sim/boot/bootloader.lds
+++ /dev/null
@@ -1,67 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-OUTPUT_FORMAT("elf64-ia64-little")
-OUTPUT_ARCH(ia64)
-ENTRY(_start)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = 0x100000;
-
-  _text = .;
-  .text : { *(__ivt_section) *(.text) }
-  _etext = .;
-
-  /* Global data */
-  _data = .;
-  .rodata : { *(.rodata) *(.rodata.*) }
-  .data    : { *(.data) *(.gnu.linkonce.d*) CONSTRUCTORS }
-  __gp = ALIGN (8) + 0x200000;
-  .got           : { *(.got.plt) *(.got) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata     : { *(.sdata) }
-  _edata  =  .;
-
-  __bss_start = .;
-  .sbss      : { *(.sbss) *(.scommon) }
-  .bss       : { *(.bss) *(COMMON) }
-  . = ALIGN(64 / 8);
-  __bss_stop = .;
-  _end = . ;
-
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
-}
diff --git a/arch/ia64/hp/sim/boot/fw-emu.c b/arch/ia64/hp/sim/boot/fw-emu.c
deleted file mode 100644
index 517fb2822e04..000000000000
--- a/arch/ia64/hp/sim/boot/fw-emu.c
+++ /dev/null
@@ -1,374 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * PAL & SAL emulation.
- *
- * Copyright (C) 1998-2001 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#ifdef CONFIG_PCI
-# include <linux/pci.h>
-#endif
-
-#include <linux/efi.h>
-#include <asm/io.h>
-#include <asm/pal.h>
-#include <asm/sal.h>
-#include <asm/setup.h>
-
-#include "ssc.h"
-
-#define MB	(1024*1024UL)
-
-#define SIMPLE_MEMMAP	1
-
-#if SIMPLE_MEMMAP
-# define NUM_MEM_DESCS	4
-#else
-# define NUM_MEM_DESCS	16
-#endif
-
-static char fw_mem[(  sizeof(struct ia64_boot_param)
-		    + sizeof(efi_system_table_t)
-		    + sizeof(efi_runtime_services_t)
-		    + 1*sizeof(efi_config_table_t)
-		    + sizeof(struct ia64_sal_systab)
-		    + sizeof(struct ia64_sal_desc_entry_point)
-		    + NUM_MEM_DESCS*(sizeof(efi_memory_desc_t))
-		    + 1024)] __attribute__ ((aligned (8)));
-
-#define SECS_PER_HOUR   (60 * 60)
-#define SECS_PER_DAY    (SECS_PER_HOUR * 24)
-
-/* Compute the `struct tm' representation of *T,
-   offset OFFSET seconds east of UTC,
-   and store year, yday, mon, mday, wday, hour, min, sec into *TP.
-   Return nonzero if successful.  */
-int
-offtime (unsigned long t, efi_time_t *tp)
-{
-	const unsigned short int __mon_yday[2][13] =
-	{
-		/* Normal years.  */
-		{ 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
-		/* Leap years.  */
-		{ 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
-	};
-	long int days, rem, y;
-	const unsigned short int *ip;
-
-	days = t / SECS_PER_DAY;
-	rem = t % SECS_PER_DAY;
-	while (rem < 0) {
-		rem += SECS_PER_DAY;
-		--days;
-	}
-	while (rem >= SECS_PER_DAY) {
-		rem -= SECS_PER_DAY;
-		++days;
-	}
-	tp->hour = rem / SECS_PER_HOUR;
-	rem %= SECS_PER_HOUR;
-	tp->minute = rem / 60;
-	tp->second = rem % 60;
-	/* January 1, 1970 was a Thursday.  */
-	y = 1970;
-
-#	define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
-#	define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
-#	define __isleap(year) \
-	  ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
-
-	while (days < 0 || days >= (__isleap (y) ? 366 : 365)) {
-		/* Guess a corrected year, assuming 365 days per year.  */
-		long int yg = y + days / 365 - (days % 365 < 0);
-
-		/* Adjust DAYS and Y to match the guessed year.  */
-		days -= ((yg - y) * 365 + LEAPS_THRU_END_OF (yg - 1)
-			 - LEAPS_THRU_END_OF (y - 1));
-		y = yg;
-	}
-	tp->year = y;
-	ip = __mon_yday[__isleap(y)];
-	for (y = 11; days < (long int) ip[y]; --y)
-		continue;
-	days -= ip[y];
-	tp->month = y + 1;
-	tp->day = days + 1;
-	return 1;
-}
-
-extern void pal_emulator_static (void);
-
-/* Macro to emulate SAL call using legacy IN and OUT calls to CF8, CFC etc.. */
-
-#define BUILD_CMD(addr)		((0x80000000 | (addr)) & ~3)
-
-#define REG_OFFSET(addr)	(0x00000000000000FF & (addr))
-#define DEVICE_FUNCTION(addr)	(0x000000000000FF00 & (addr))
-#define BUS_NUMBER(addr)	(0x0000000000FF0000 & (addr))
-
-static efi_status_t
-fw_efi_get_time (efi_time_t *tm, efi_time_cap_t *tc)
-{
-#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC)
-	struct {
-		int tv_sec;	/* must be 32bits to work */
-		int tv_usec;
-	} tv32bits;
-
-	ssc((unsigned long) &tv32bits, 0, 0, 0, SSC_GET_TOD);
-
-	memset(tm, 0, sizeof(*tm));
-	offtime(tv32bits.tv_sec, tm);
-
-	if (tc)
-		memset(tc, 0, sizeof(*tc));
-#else
-#	error Not implemented yet...
-#endif
-	return EFI_SUCCESS;
-}
-
-static void
-efi_reset_system (int reset_type, efi_status_t status, unsigned long data_size, efi_char16_t *data)
-{
-#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC)
-	ssc(status, 0, 0, 0, SSC_EXIT);
-#else
-#	error Not implemented yet...
-#endif
-}
-
-static efi_status_t
-efi_unimplemented (void)
-{
-	return EFI_UNSUPPORTED;
-}
-
-static struct sal_ret_values
-sal_emulator (long index, unsigned long in1, unsigned long in2,
-	      unsigned long in3, unsigned long in4, unsigned long in5,
-	      unsigned long in6, unsigned long in7)
-{
-	long r9  = 0;
-	long r10 = 0;
-	long r11 = 0;
-	long status;
-
-	/*
-	 * Don't do a "switch" here since that gives us code that
-	 * isn't self-relocatable.
-	 */
-	status = 0;
-	if (index == SAL_FREQ_BASE) {
-		if (in1 == SAL_FREQ_BASE_PLATFORM)
-			r9 = 200000000;
-		else if (in1 == SAL_FREQ_BASE_INTERVAL_TIMER) {
-			/*
-			 * Is this supposed to be the cr.itc frequency
-			 * or something platform specific?  The SAL
-			 * doc ain't exactly clear on this...
-			 */
-			r9 = 700000000;
-		} else if (in1 == SAL_FREQ_BASE_REALTIME_CLOCK)
-			r9 = 1;
-		else
-			status = -1;
-	} else if (index == SAL_SET_VECTORS) {
-		;
-	} else if (index == SAL_GET_STATE_INFO) {
-		;
-	} else if (index == SAL_GET_STATE_INFO_SIZE) {
-		;
-	} else if (index == SAL_CLEAR_STATE_INFO) {
-		;
-	} else if (index == SAL_MC_RENDEZ) {
-		;
-	} else if (index == SAL_MC_SET_PARAMS) {
-		;
-	} else if (index == SAL_CACHE_FLUSH) {
-		;
-	} else if (index == SAL_CACHE_INIT) {
-		;
-#ifdef CONFIG_PCI
-	} else if (index == SAL_PCI_CONFIG_READ) {
-		/*
-		 * in1 contains the PCI configuration address and in2
-		 * the size of the read.  The value that is read is
-		 * returned via the general register r9.
-		 */
-                outl(BUILD_CMD(in1), 0xCF8);
-                if (in2 == 1)                           /* Reading byte  */
-                        r9 = inb(0xCFC + ((REG_OFFSET(in1) & 3)));
-                else if (in2 == 2)                      /* Reading word  */
-                        r9 = inw(0xCFC + ((REG_OFFSET(in1) & 2)));
-                else                                    /* Reading dword */
-                        r9 = inl(0xCFC);
-                status = PCIBIOS_SUCCESSFUL;
-	} else if (index == SAL_PCI_CONFIG_WRITE) {
-	      	/*
-		 * in1 contains the PCI configuration address, in2 the
-		 * size of the write, and in3 the actual value to be
-		 * written out.
-		 */
-                outl(BUILD_CMD(in1), 0xCF8);
-                if (in2 == 1)                           /* Writing byte  */
-                        outb(in3, 0xCFC + ((REG_OFFSET(in1) & 3)));
-                else if (in2 == 2)                      /* Writing word  */
-                        outw(in3, 0xCFC + ((REG_OFFSET(in1) & 2)));
-                else                                    /* Writing dword */
-                        outl(in3, 0xCFC);
-                status = PCIBIOS_SUCCESSFUL;
-#endif /* CONFIG_PCI */
-	} else if (index == SAL_UPDATE_PAL) {
-		;
-	} else {
-		status = -1;
-	}
-	return ((struct sal_ret_values) {status, r9, r10, r11});
-}
-
-struct ia64_boot_param *
-sys_fw_init (const char *args, int arglen)
-{
-	efi_system_table_t *efi_systab;
-	efi_runtime_services_t *efi_runtime;
-	efi_config_table_t *efi_tables;
-	struct ia64_sal_systab *sal_systab;
-	efi_memory_desc_t *efi_memmap, *md;
-	unsigned long *pal_desc, *sal_desc;
-	struct ia64_sal_desc_entry_point *sal_ed;
-	struct ia64_boot_param *bp;
-	unsigned char checksum = 0;
-	char *cp, *cmd_line;
-	int i = 0;
-#	define MAKE_MD(typ, attr, start, end)		\
-	do {						\
-		md = efi_memmap + i++;			\
-		md->type = typ;				\
-		md->pad = 0;				\
-		md->phys_addr = start;			\
-		md->virt_addr = 0;			\
-		md->num_pages = (end - start) >> 12;	\
-		md->attribute = attr;			\
-	} while (0)
-
-	memset(fw_mem, 0, sizeof(fw_mem));
-
-	pal_desc = (unsigned long *) &pal_emulator_static;
-	sal_desc = (unsigned long *) &sal_emulator;
-
-	cp = fw_mem;
-	efi_systab  = (void *) cp; cp += sizeof(*efi_systab);
-	efi_runtime = (void *) cp; cp += sizeof(*efi_runtime);
-	efi_tables  = (void *) cp; cp += sizeof(*efi_tables);
-	sal_systab  = (void *) cp; cp += sizeof(*sal_systab);
-	sal_ed      = (void *) cp; cp += sizeof(*sal_ed);
-	efi_memmap  = (void *) cp; cp += NUM_MEM_DESCS*sizeof(*efi_memmap);
-	bp	    = (void *) cp; cp += sizeof(*bp);
-	cmd_line    = (void *) cp;
-
-	if (args) {
-		if (arglen >= 1024)
-			arglen = 1023;
-		memcpy(cmd_line, args, arglen);
-	} else {
-		arglen = 0;
-	}
-	cmd_line[arglen] = '\0';
-
-	memset(efi_systab, 0, sizeof(*efi_systab));
-	efi_systab->hdr.signature = EFI_SYSTEM_TABLE_SIGNATURE;
-	efi_systab->hdr.revision  = ((1 << 16) | 00);
-	efi_systab->hdr.headersize = sizeof(efi_systab->hdr);
-	efi_systab->fw_vendor = __pa("H\0e\0w\0l\0e\0t\0t\0-\0P\0a\0c\0k\0a\0r\0d\0\0");
-	efi_systab->fw_revision = 1;
-	efi_systab->runtime = (void *) __pa(efi_runtime);
-	efi_systab->nr_tables = 1;
-	efi_systab->tables = __pa(efi_tables);
-
-	efi_runtime->hdr.signature = EFI_RUNTIME_SERVICES_SIGNATURE;
-	efi_runtime->hdr.revision = EFI_RUNTIME_SERVICES_REVISION;
-	efi_runtime->hdr.headersize = sizeof(efi_runtime->hdr);
-	efi_runtime->get_time = (void *)__pa(&fw_efi_get_time);
-	efi_runtime->set_time = (void *)__pa(&efi_unimplemented);
-	efi_runtime->get_wakeup_time = (void *)__pa(&efi_unimplemented);
-	efi_runtime->set_wakeup_time = (void *)__pa(&efi_unimplemented);
-	efi_runtime->set_virtual_address_map = (void *)__pa(&efi_unimplemented);
-	efi_runtime->get_variable = (void *)__pa(&efi_unimplemented);
-	efi_runtime->get_next_variable = (void *)__pa(&efi_unimplemented);
-	efi_runtime->set_variable = (void *)__pa(&efi_unimplemented);
-	efi_runtime->get_next_high_mono_count = (void *)__pa(&efi_unimplemented);
-	efi_runtime->reset_system = (void *)__pa(&efi_reset_system);
-
-	efi_tables->guid = SAL_SYSTEM_TABLE_GUID;
-	efi_tables->table = __pa(sal_systab);
-
-	/* fill in the SAL system table: */
-	memcpy(sal_systab->signature, "SST_", 4);
-	sal_systab->size = sizeof(*sal_systab);
-	sal_systab->sal_rev_minor = 1;
-	sal_systab->sal_rev_major = 0;
-	sal_systab->entry_count = 1;
-
-#ifdef CONFIG_IA64_GENERIC
-        strcpy(sal_systab->oem_id, "Generic");
-        strcpy(sal_systab->product_id, "IA-64 system");
-#endif
-
-#ifdef CONFIG_IA64_HP_SIM
-	strcpy(sal_systab->oem_id, "Hewlett-Packard");
-	strcpy(sal_systab->product_id, "HP-simulator");
-#endif
-
-	/* fill in an entry point: */
-	sal_ed->type = SAL_DESC_ENTRY_POINT;
-	sal_ed->pal_proc = __pa(pal_desc[0]);
-	sal_ed->sal_proc = __pa(sal_desc[0]);
-	sal_ed->gp = __pa(sal_desc[1]);
-
-	for (cp = (char *) sal_systab; cp < (char *) efi_memmap; ++cp)
-		checksum += *cp;
-
-	sal_systab->checksum = -checksum;
-
-#if SIMPLE_MEMMAP
-	/* simulate free memory at physical address zero */
-	MAKE_MD(EFI_BOOT_SERVICES_DATA,		EFI_MEMORY_WB,    0*MB,    1*MB);
-	MAKE_MD(EFI_PAL_CODE,			EFI_MEMORY_WB,    1*MB,    2*MB);
-	MAKE_MD(EFI_CONVENTIONAL_MEMORY,	EFI_MEMORY_WB,    2*MB,  130*MB);
-	MAKE_MD(EFI_CONVENTIONAL_MEMORY,	EFI_MEMORY_WB, 4096*MB, 4128*MB);
-#else
-	MAKE_MD( 4,		   0x9, 0x0000000000000000, 0x0000000000001000);
-	MAKE_MD( 7,		   0x9, 0x0000000000001000, 0x000000000008a000);
-	MAKE_MD( 4,		   0x9, 0x000000000008a000, 0x00000000000a0000);
-	MAKE_MD( 5, 0x8000000000000009, 0x00000000000c0000, 0x0000000000100000);
-	MAKE_MD( 7,		   0x9, 0x0000000000100000, 0x0000000004400000);
-	MAKE_MD( 2,		   0x9, 0x0000000004400000, 0x0000000004be5000);
-	MAKE_MD( 7,		   0x9, 0x0000000004be5000, 0x000000007f77e000);
-	MAKE_MD( 6, 0x8000000000000009, 0x000000007f77e000, 0x000000007fb94000);
-	MAKE_MD( 6, 0x8000000000000009, 0x000000007fb94000, 0x000000007fb95000);
-	MAKE_MD( 6, 0x8000000000000009, 0x000000007fb95000, 0x000000007fc00000);
-	MAKE_MD(13, 0x8000000000000009, 0x000000007fc00000, 0x000000007fc3a000);
-	MAKE_MD( 7,		   0x9, 0x000000007fc3a000, 0x000000007fea0000);
-	MAKE_MD( 5, 0x8000000000000009, 0x000000007fea0000, 0x000000007fea8000);
-	MAKE_MD( 7,		   0x9, 0x000000007fea8000, 0x000000007feab000);
-	MAKE_MD( 5, 0x8000000000000009, 0x000000007feab000, 0x000000007ffff000);
-	MAKE_MD( 7,		   0x9, 0x00000000ff400000, 0x0000000104000000);
-#endif
-
-	bp->efi_systab = __pa(&fw_mem);
-	bp->efi_memmap = __pa(efi_memmap);
-	bp->efi_memmap_size = NUM_MEM_DESCS*sizeof(efi_memory_desc_t);
-	bp->efi_memdesc_size = sizeof(efi_memory_desc_t);
-	bp->efi_memdesc_version = 1;
-	bp->command_line = __pa(cmd_line);
-	bp->console_info.num_cols = 80;
-	bp->console_info.num_rows = 25;
-	bp->console_info.orig_x = 0;
-	bp->console_info.orig_y = 24;
-	bp->fpswa = 0;
-
-	return bp;
-}
diff --git a/arch/ia64/hp/sim/boot/ssc.h b/arch/ia64/hp/sim/boot/ssc.h
deleted file mode 100644
index 88752c7509e0..000000000000
--- a/arch/ia64/hp/sim/boot/ssc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 1998-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *	Stephane Eranian <eranian@hpl.hp.com>
- */
-#ifndef ssc_h
-#define ssc_h
-
-/* Simulator system calls: */
-
-#define SSC_CONSOLE_INIT		20
-#define SSC_GETCHAR			21
-#define SSC_PUTCHAR			31
-#define SSC_OPEN			50
-#define SSC_CLOSE			51
-#define SSC_READ			52
-#define SSC_WRITE			53
-#define SSC_GET_COMPLETION		54
-#define SSC_WAIT_COMPLETION		55
-#define SSC_CONNECT_INTERRUPT		58
-#define SSC_GENERATE_INTERRUPT		59
-#define SSC_SET_PERIODIC_INTERRUPT	60
-#define SSC_GET_RTC			65
-#define SSC_EXIT			66
-#define SSC_LOAD_SYMBOLS		69
-#define SSC_GET_TOD			74
-
-#define SSC_GET_ARGS			75
-
-/*
- * Simulator system call.
- */
-extern long ssc (long arg0, long arg1, long arg2, long arg3, int nr);
-
-#endif /* ssc_h */
diff --git a/arch/ia64/hp/sim/hpsim.S b/arch/ia64/hp/sim/hpsim.S
deleted file mode 100644
index 44b4d53e1689..000000000000
--- a/arch/ia64/hp/sim/hpsim.S
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/asmmacro.h>
-
-/*
- * Simulator system call.
- */
-GLOBAL_ENTRY(ia64_ssc)
-	mov r15=r36
-	break 0x80001
-	br.ret.sptk.many rp
-END(ia64_ssc)
diff --git a/arch/ia64/hp/sim/hpsim_console.c b/arch/ia64/hp/sim/hpsim_console.c
deleted file mode 100644
index bffd9f67a8a1..000000000000
--- a/arch/ia64/hp/sim/hpsim_console.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Platform dependent support for HP simulator.
- *
- * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/tty.h>
-#include <linux/kdev_t.h>
-#include <linux/console.h>
-
-#include <asm/delay.h>
-#include <asm/irq.h>
-#include <asm/pal.h>
-#include <asm/machvec.h>
-#include <asm/pgtable.h>
-#include <asm/sal.h>
-#include <asm/hpsim.h>
-
-#include "hpsim_ssc.h"
-
-static int simcons_init (struct console *, char *);
-static void simcons_write (struct console *, const char *, unsigned);
-static struct tty_driver *simcons_console_device (struct console *, int *);
-
-static struct console hpsim_cons = {
-	.name =		"simcons",
-	.write =	simcons_write,
-	.device =	simcons_console_device,
-	.setup =	simcons_init,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-
-static int
-simcons_init (struct console *cons, char *options)
-{
-	return 0;
-}
-
-static void
-simcons_write (struct console *cons, const char *buf, unsigned count)
-{
-	unsigned long ch;
-
-	while (count-- > 0) {
-		ch = *buf++;
-		ia64_ssc(ch, 0, 0, 0, SSC_PUTCHAR);
-		if (ch == '\n')
-		  ia64_ssc('\r', 0, 0, 0, SSC_PUTCHAR);
-	}
-}
-
-static struct tty_driver *simcons_console_device (struct console *c, int *index)
-{
-	*index = c->index;
-	return hp_simserial_driver;
-}
-
-int simcons_register(void)
-{
-	if (!ia64_platform_is("hpsim"))
-		return 1;
-
-	if (hpsim_cons.flags & CON_ENABLED)
-		return 1;
-
-	register_console(&hpsim_cons);
-	return 0;
-}
diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c
deleted file mode 100644
index 2f1cc59650ab..000000000000
--- a/arch/ia64/hp/sim/hpsim_irq.c
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Platform dependent support for HP simulator.
- *
- * Copyright (C) 1998-2001 Hewlett-Packard Co
- * Copyright (C) 1998-2001 David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/irq.h>
-
-#include "hpsim_ssc.h"
-
-static unsigned int
-hpsim_irq_startup(struct irq_data *data)
-{
-	return 0;
-}
-
-static void
-hpsim_irq_noop(struct irq_data *data)
-{
-}
-
-static int
-hpsim_set_affinity_noop(struct irq_data *d, const struct cpumask *b, bool f)
-{
-	return 0;
-}
-
-static struct irq_chip irq_type_hp_sim = {
-	.name =			"hpsim",
-	.irq_startup =		hpsim_irq_startup,
-	.irq_shutdown =		hpsim_irq_noop,
-	.irq_enable =		hpsim_irq_noop,
-	.irq_disable =		hpsim_irq_noop,
-	.irq_ack =		hpsim_irq_noop,
-	.irq_set_affinity =	hpsim_set_affinity_noop,
-};
-
-static void hpsim_irq_set_chip(int irq)
-{
-	struct irq_chip *chip = irq_get_chip(irq);
-
-	if (chip == &no_irq_chip)
-		irq_set_chip(irq, &irq_type_hp_sim);
-}
-
-static void hpsim_connect_irq(int intr, int irq)
-{
-	ia64_ssc(intr, irq, 0, 0, SSC_CONNECT_INTERRUPT);
-}
-
-int hpsim_get_irq(int intr)
-{
-	int irq = assign_irq_vector(AUTO_ASSIGN);
-
-	if (irq >= 0) {
-		hpsim_irq_set_chip(irq);
-		irq_set_handler(irq, handle_simple_irq);
-		hpsim_connect_irq(intr, irq);
-	}
-
-	return irq;
-}
-
-void __init
-hpsim_irq_init (void)
-{
-	int i;
-
-	for_each_active_irq(i)
-		hpsim_irq_set_chip(i);
-}
diff --git a/arch/ia64/hp/sim/hpsim_machvec.c b/arch/ia64/hp/sim/hpsim_machvec.c
deleted file mode 100644
index c21419359185..000000000000
--- a/arch/ia64/hp/sim/hpsim_machvec.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#define MACHVEC_PLATFORM_NAME		hpsim
-#define MACHVEC_PLATFORM_HEADER		<asm/machvec_hpsim.h>
-#include <asm/machvec_init.h>
diff --git a/arch/ia64/hp/sim/hpsim_setup.c b/arch/ia64/hp/sim/hpsim_setup.c
deleted file mode 100644
index 41d21d51dc4d..000000000000
--- a/arch/ia64/hp/sim/hpsim_setup.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Platform dependent support for HP simulator.
- *
- * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com>
- */
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/kdev_t.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/param.h>
-#include <linux/root_dev.h>
-#include <linux/string.h>
-#include <linux/types.h>
-
-#include <asm/delay.h>
-#include <asm/irq.h>
-#include <asm/pal.h>
-#include <asm/machvec.h>
-#include <asm/pgtable.h>
-#include <asm/sal.h>
-#include <asm/hpsim.h>
-
-#include "hpsim_ssc.h"
-
-void
-ia64_ctl_trace (long on)
-{
-	ia64_ssc(on, 0, 0, 0, SSC_CTL_TRACE);
-}
-
-void __init
-hpsim_setup (char **cmdline_p)
-{
-	ROOT_DEV = Root_SDA1;		/* default to first SCSI drive */
-
-	simcons_register();
-}
diff --git a/arch/ia64/hp/sim/hpsim_ssc.h b/arch/ia64/hp/sim/hpsim_ssc.h
deleted file mode 100644
index 6fd97a487811..000000000000
--- a/arch/ia64/hp/sim/hpsim_ssc.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Platform dependent support for HP simulator.
- *
- * Copyright (C) 1998, 1999 Hewlett-Packard Co
- * Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com>
- */
-#ifndef _IA64_PLATFORM_HPSIM_SSC_H
-#define _IA64_PLATFORM_HPSIM_SSC_H
-
-/* Simulator system calls: */
-
-#define SSC_CONSOLE_INIT		20
-#define SSC_GETCHAR			21
-#define SSC_PUTCHAR			31
-#define SSC_CONNECT_INTERRUPT		58
-#define SSC_GENERATE_INTERRUPT		59
-#define SSC_SET_PERIODIC_INTERRUPT	60
-#define SSC_GET_RTC			65
-#define SSC_EXIT			66
-#define SSC_LOAD_SYMBOLS		69
-#define SSC_GET_TOD			74
-#define SSC_CTL_TRACE			76
-
-#define SSC_NETDEV_PROBE		100
-#define SSC_NETDEV_SEND			101
-#define SSC_NETDEV_RECV			102
-#define SSC_NETDEV_ATTACH		103
-#define SSC_NETDEV_DETACH		104
-
-/*
- * Simulator system call.
- */
-extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr);
-
-#endif /* _IA64_PLATFORM_HPSIM_SSC_H */
diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c
deleted file mode 100644
index f39ef2b4ed72..000000000000
--- a/arch/ia64/hp/sim/simeth.c
+++ /dev/null
@@ -1,510 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Simulated Ethernet Driver
- *
- * Copyright (C) 1999-2001, 2003 Hewlett-Packard Co
- *	Stephane Eranian <eranian@hpl.hp.com>
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/in.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/inetdevice.h>
-#include <linux/if_ether.h>
-#include <linux/if_arp.h>
-#include <linux/skbuff.h>
-#include <linux/notifier.h>
-#include <linux/bitops.h>
-#include <asm/irq.h>
-#include <asm/hpsim.h>
-
-#include "hpsim_ssc.h"
-
-#define SIMETH_RECV_MAX	10
-
-/*
- * Maximum possible received frame for Ethernet.
- * We preallocate an sk_buff of that size to avoid costly
- * memcpy for temporary buffer into sk_buff. We do basically
- * what's done in other drivers, like eepro with a ring.
- * The difference is, of course, that we don't have real DMA !!!
- */
-#define SIMETH_FRAME_SIZE	ETH_FRAME_LEN
-
-
-#define NETWORK_INTR			8
-
-struct simeth_local {
-	struct net_device_stats stats;
-	int 			simfd;	 /* descriptor in the simulator */
-};
-
-static int simeth_probe1(void);
-static int simeth_open(struct net_device *dev);
-static int simeth_close(struct net_device *dev);
-static int simeth_tx(struct sk_buff *skb, struct net_device *dev);
-static int simeth_rx(struct net_device *dev);
-static struct net_device_stats *simeth_get_stats(struct net_device *dev);
-static irqreturn_t simeth_interrupt(int irq, void *dev_id);
-static void set_multicast_list(struct net_device *dev);
-static int simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr);
-
-static char *simeth_version="0.3";
-
-/*
- * This variable is used to establish a mapping between the Linux/ia64 kernel
- * and the host linux kernel.
- *
- * As of today, we support only one card, even though most of the code
- * is ready for many more. The mapping is then:
- *	linux/ia64 -> linux/x86
- * 	   eth0    -> eth1
- *
- * In the future, we some string operations, we could easily support up
- * to 10 cards (0-9).
- *
- * The default mapping can be changed on the kernel command line by
- * specifying simeth=ethX (or whatever string you want).
- */
-static char *simeth_device="eth0";	 /* default host interface to use */
-
-
-
-static volatile unsigned int card_count; /* how many cards "found" so far */
-static int simeth_debug;		/* set to 1 to get debug information */
-
-/*
- * Used to catch IFF_UP & IFF_DOWN events
- */
-static struct notifier_block simeth_dev_notifier = {
-	simeth_device_event,
-	NULL
-};
-
-
-/*
- * Function used when using a kernel command line option.
- *
- * Format: simeth=interface_name (like eth0)
- */
-static int __init
-simeth_setup(char *str)
-{
-	simeth_device = str;
-	return 1;
-}
-
-__setup("simeth=", simeth_setup);
-
-/*
- * Function used to probe for simeth devices when not installed
- * as a loadable module
- */
-
-int __init
-simeth_probe (void)
-{
-	int r;
-
-	printk(KERN_INFO "simeth: v%s\n", simeth_version);
-
-	r = simeth_probe1();
-
-	if (r == 0) register_netdevice_notifier(&simeth_dev_notifier);
-
-	return r;
-}
-
-static inline int
-netdev_probe(char *name, unsigned char *ether)
-{
-	return ia64_ssc(__pa(name), __pa(ether), 0,0, SSC_NETDEV_PROBE);
-}
-
-
-static inline int
-netdev_attach(int fd, int irq, unsigned int ipaddr)
-{
-	/* this puts the host interface in the right mode (start interrupting) */
-	return ia64_ssc(fd, ipaddr, 0,0, SSC_NETDEV_ATTACH);
-}
-
-
-static inline int
-netdev_detach(int fd)
-{
-	/*
-	 * inactivate the host interface (don't interrupt anymore) */
-	return ia64_ssc(fd, 0,0,0, SSC_NETDEV_DETACH);
-}
-
-static inline int
-netdev_send(int fd, unsigned char *buf, unsigned int len)
-{
-	return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_SEND);
-}
-
-static inline int
-netdev_read(int fd, unsigned char *buf, unsigned int len)
-{
-	return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_RECV);
-}
-
-static const struct net_device_ops simeth_netdev_ops = {
-	.ndo_open		= simeth_open,
-	.ndo_stop		= simeth_close,
-	.ndo_start_xmit		= simeth_tx,
-	.ndo_get_stats		= simeth_get_stats,
-	.ndo_set_rx_mode	= set_multicast_list, /* not yet used */
-
-};
-
-/*
- * Function shared with module code, so cannot be in init section
- *
- * So far this function "detects" only one card (test_&_set) but could
- * be extended easily.
- *
- * Return:
- * 	- -ENODEV is no device found
- *	- -ENOMEM is no more memory
- *	- 0 otherwise
- */
-static int
-simeth_probe1(void)
-{
-	unsigned char mac_addr[ETH_ALEN];
-	struct simeth_local *local;
-	struct net_device *dev;
-	int fd, err, rc;
-
-	/*
-	 * XXX Fix me
-	 * let's support just one card for now
-	 */
-	if (test_and_set_bit(0, &card_count))
-		return -ENODEV;
-
-	/*
-	 * check with the simulator for the device
-	 */
-	fd = netdev_probe(simeth_device, mac_addr);
-	if (fd == -1)
-		return -ENODEV;
-
-	dev = alloc_etherdev(sizeof(struct simeth_local));
-	if (!dev)
-		return -ENOMEM;
-
-	memcpy(dev->dev_addr, mac_addr, sizeof(mac_addr));
-
-	local = netdev_priv(dev);
-	local->simfd = fd; /* keep track of underlying file descriptor */
-
-	dev->netdev_ops = &simeth_netdev_ops;
-
-	err = register_netdev(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
-
-	/*
-	 * attach the interrupt in the simulator, this does enable interrupts
-	 * until a netdev_attach() is called
-	 */
-	if ((rc = hpsim_get_irq(NETWORK_INTR)) < 0)
-		panic("%s: out of interrupt vectors!\n", __func__);
-	dev->irq = rc;
-
-	printk(KERN_INFO "%s: hosteth=%s simfd=%d, HwAddr=%pm, IRQ %d\n",
-	       dev->name, simeth_device, local->simfd, dev->dev_addr, dev->irq);
-
-	return 0;
-}
-
-/*
- * actually binds the device to an interrupt vector
- */
-static int
-simeth_open(struct net_device *dev)
-{
-	if (request_irq(dev->irq, simeth_interrupt, 0, "simeth", dev)) {
-		printk(KERN_WARNING "simeth: unable to get IRQ %d.\n", dev->irq);
-		return -EAGAIN;
-	}
-
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-/* copied from lapbether.c */
-static __inline__ int dev_is_ethdev(struct net_device *dev)
-{
-       return ( dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5));
-}
-
-
-/*
- * Handler for IFF_UP or IFF_DOWN
- *
- * The reason for that is that we don't want to be interrupted when the
- * interface is down. There is no way to unconnect in the simualtor. Instead
- * we use this function to shutdown packet processing in the frame filter
- * in the simulator. Thus no interrupts are generated
- *
- *
- * That's also the place where we pass the IP address of this device to the
- * simulator so that that we can start filtering packets for it
- *
- * There may be a better way of doing this, but I don't know which yet.
- */
-static int
-simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr)
-{
-	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-	struct simeth_local *local;
-	struct in_device *in_dev;
-	struct in_ifaddr **ifap = NULL;
-	struct in_ifaddr *ifa = NULL;
-	int r;
-
-
-	if ( ! dev ) {
-		printk(KERN_WARNING "simeth_device_event dev=0\n");
-		return NOTIFY_DONE;
-	}
-
-	if (dev_net(dev) != &init_net)
-		return NOTIFY_DONE;
-
-	if ( event != NETDEV_UP && event != NETDEV_DOWN ) return NOTIFY_DONE;
-
-	/*
-	 * Check whether or not it's for an ethernet device
-	 *
-	 * XXX Fixme: This works only as long as we support one
-	 * type of ethernet device.
-	 */
-	if ( !dev_is_ethdev(dev) ) return NOTIFY_DONE;
-
-	if ((in_dev=dev->ip_ptr) != NULL) {
-		for (ifap=&in_dev->ifa_list; (ifa=*ifap) != NULL; ifap=&ifa->ifa_next)
-			if (strcmp(dev->name, ifa->ifa_label) == 0) break;
-	}
-	if ( ifa == NULL ) {
-		printk(KERN_ERR "simeth_open: can't find device %s's ifa\n", dev->name);
-		return NOTIFY_DONE;
-	}
-
-	printk(KERN_INFO "simeth_device_event: %s ipaddr=0x%x\n",
-	       dev->name, ntohl(ifa->ifa_local));
-
-	/*
-	 * XXX Fix me
-	 * if the device was up, and we're simply reconfiguring it, not sure
-	 * we get DOWN then UP.
-	 */
-
-	local = netdev_priv(dev);
-	/* now do it for real */
-	r = event == NETDEV_UP ?
-		netdev_attach(local->simfd, dev->irq, ntohl(ifa->ifa_local)):
-		netdev_detach(local->simfd);
-
-	printk(KERN_INFO "simeth: netdev_attach/detach: event=%s ->%d\n",
-	       event == NETDEV_UP ? "attach":"detach", r);
-
-	return NOTIFY_DONE;
-}
-
-static int
-simeth_close(struct net_device *dev)
-{
-	netif_stop_queue(dev);
-
-	free_irq(dev->irq, dev);
-
-	return 0;
-}
-
-/*
- * Only used for debug
- */
-static void
-frame_print(unsigned char *from, unsigned char *frame, int len)
-{
-	int i;
-
-	printk("%s: (%d) %02x", from, len, frame[0] & 0xff);
-	for(i=1; i < 6; i++ ) {
-		printk(":%02x", frame[i] &0xff);
-	}
-	printk(" %2x", frame[6] &0xff);
-	for(i=7; i < 12; i++ ) {
-		printk(":%02x", frame[i] &0xff);
-	}
-	printk(" [%02x%02x]\n", frame[12], frame[13]);
-
-	for(i=14; i < len; i++ ) {
-		printk("%02x ", frame[i] &0xff);
-		if ( (i%10)==0) printk("\n");
-	}
-	printk("\n");
-}
-
-
-/*
- * Function used to transmit of frame, very last one on the path before
- * going to the simulator.
- */
-static int
-simeth_tx(struct sk_buff *skb, struct net_device *dev)
-{
-	struct simeth_local *local = netdev_priv(dev);
-
-#if 0
-	/* ensure we have at least ETH_ZLEN bytes (min frame size) */
-	unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
-	/* Where do the extra padding bytes comes from inthe skbuff ? */
-#else
-	/* the real driver in the host system is going to take care of that
-	 * or maybe it's the NIC itself.
-	 */
-	unsigned int length = skb->len;
-#endif
-
-	local->stats.tx_bytes += skb->len;
-	local->stats.tx_packets++;
-
-
-	if (simeth_debug > 5) frame_print("simeth_tx", skb->data, length);
-
-	netdev_send(local->simfd, skb->data, length);
-
-	/*
-	 * we are synchronous on write, so we don't simulate a
-	 * trasnmit complete interrupt, thus we don't need to arm a tx
-	 */
-
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-static inline struct sk_buff *
-make_new_skb(struct net_device *dev)
-{
-	struct sk_buff *nskb;
-
-	/*
-	 * The +2 is used to make sure that the IP header is nicely
-	 * aligned (on 4byte boundary I assume 14+2=16)
-	 */
-	nskb = dev_alloc_skb(SIMETH_FRAME_SIZE + 2);
-	if ( nskb == NULL ) {
-		printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name);
-		return NULL;
-	}
-
-	skb_reserve(nskb, 2);	/* Align IP on 16 byte boundaries */
-
-	skb_put(nskb,SIMETH_FRAME_SIZE);
-
-	return nskb;
-}
-
-/*
- * called from interrupt handler to process a received frame
- */
-static int
-simeth_rx(struct net_device *dev)
-{
-	struct simeth_local	*local;
-	struct sk_buff		*skb;
-	int			len;
-	int			rcv_count = SIMETH_RECV_MAX;
-
-	local = netdev_priv(dev);
-	/*
-	 * the loop concept has been borrowed from other drivers
-	 * looks to me like it's a throttling thing to avoid pushing to many
-	 * packets at one time into the stack. Making sure we can process them
-	 * upstream and make forward progress overall
-	 */
-	do {
-		if ( (skb=make_new_skb(dev)) == NULL ) {
-			printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name);
-			local->stats.rx_dropped++;
-			return 0;
-		}
-		/*
-		 * Read only one frame at a time
-		 */
-		len = netdev_read(local->simfd, skb->data, SIMETH_FRAME_SIZE);
-		if ( len == 0 ) {
-			if ( simeth_debug > 0 ) printk(KERN_WARNING "%s: count=%d netdev_read=0\n",
-						       dev->name, SIMETH_RECV_MAX-rcv_count);
-			break;
-		}
-#if 0
-		/*
-		 * XXX Fix me
-		 * Should really do a csum+copy here
-		 */
-		skb_copy_to_linear_data(skb, frame, len);
-#endif
-		skb->protocol = eth_type_trans(skb, dev);
-
-		if ( simeth_debug > 6 ) frame_print("simeth_rx", skb->data, len);
-
-		/*
-		 * push the packet up & trigger software interrupt
-		 */
-		netif_rx(skb);
-
-		local->stats.rx_packets++;
-		local->stats.rx_bytes += len;
-
-	} while ( --rcv_count );
-
-	return len; /* 0 = nothing left to read, otherwise, we can try again */
-}
-
-/*
- * Interrupt handler (Yes, we can do it too !!!)
- */
-static irqreturn_t
-simeth_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-
-	/*
-	 * very simple loop because we get interrupts only when receiving
-	 */
-	while (simeth_rx(dev));
-	return IRQ_HANDLED;
-}
-
-static struct net_device_stats *
-simeth_get_stats(struct net_device *dev)
-{
-	struct simeth_local *local = netdev_priv(dev);
-
-	return &local->stats;
-}
-
-/* fake multicast ability */
-static void
-set_multicast_list(struct net_device *dev)
-{
-	printk(KERN_WARNING "%s: set_multicast_list called\n", dev->name);
-}
-
-__initcall(simeth_probe);
diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
deleted file mode 100644
index 0a8a74271173..000000000000
--- a/arch/ia64/hp/sim/simscsi.c
+++ /dev/null
@@ -1,373 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Simulated SCSI driver.
- *
- * Copyright (C) 1999, 2001-2003 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- *	Stephane Eranian <eranian@hpl.hp.com>
- *
- * 02/01/15 David Mosberger	Updated for v2.5.1
- * 99/12/18 David Mosberger	Added support for READ10/WRITE10 needed by linux v2.3.33
- */
-#include <linux/blkdev.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <asm/irq.h>
-#include "hpsim_ssc.h"
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-
-#define DEBUG_SIMSCSI	0
-
-#define SIMSCSI_REQ_QUEUE_LEN	64
-#define DEFAULT_SIMSCSI_ROOT	"/var/ski-disks/sd"
-
-/* Simulator system calls: */
-
-#define SSC_OPEN			50
-#define SSC_CLOSE			51
-#define SSC_READ			52
-#define SSC_WRITE			53
-#define SSC_GET_COMPLETION		54
-#define SSC_WAIT_COMPLETION		55
-
-#define SSC_WRITE_ACCESS		2
-#define SSC_READ_ACCESS			1
-
-#if DEBUG_SIMSCSI
-  int simscsi_debug;
-# define DBG	simscsi_debug
-#else
-# define DBG	0
-#endif
-
-static struct Scsi_Host *host;
-
-static void simscsi_interrupt (unsigned long val);
-static DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0);
-
-struct disk_req {
-	unsigned long addr;
-	unsigned len;
-};
-
-struct disk_stat {
-	int fd;
-	unsigned count;
-};
-
-static int desc[16] = {
-	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
-};
-
-static struct queue_entry {
-	struct scsi_cmnd *sc;
-} queue[SIMSCSI_REQ_QUEUE_LEN];
-
-static int rd, wr;
-static atomic_t num_reqs = ATOMIC_INIT(0);
-
-/* base name for default disks */
-static char *simscsi_root = DEFAULT_SIMSCSI_ROOT;
-
-#define MAX_ROOT_LEN	128
-
-/*
- * used to setup a new base for disk images
- * to use /foo/bar/disk[a-z] as disk images
- * you have to specify simscsi=/foo/bar/disk on the command line
- */
-static int __init
-simscsi_setup (char *s)
-{
-	/* XXX Fix me we may need to strcpy() ? */
-	if (strlen(s) > MAX_ROOT_LEN) {
-		printk(KERN_ERR "simscsi_setup: prefix too long---using default %s\n",
-		       simscsi_root);
-	} else
-		simscsi_root = s;
-	return 1;
-}
-
-__setup("simscsi=", simscsi_setup);
-
-static void
-simscsi_interrupt (unsigned long val)
-{
-	struct scsi_cmnd *sc;
-
-	while ((sc = queue[rd].sc) != NULL) {
-		atomic_dec(&num_reqs);
-		queue[rd].sc = NULL;
-		if (DBG)
-			printk("simscsi_interrupt: done with %u\n",
-			       sc->request->tag);
-		(*sc->scsi_done)(sc);
-		rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN;
-	}
-}
-
-static int
-simscsi_biosparam (struct scsi_device *sdev, struct block_device *n,
-		sector_t capacity, int ip[])
-{
-	ip[0] = 64;		/* heads */
-	ip[1] = 32;		/* sectors */
-	ip[2] = capacity >> 11;	/* cylinders */
-	return 0;
-}
-
-static void
-simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset)
-{
-	int i;
-	struct scatterlist *sl;
-	struct disk_stat stat;
-	struct disk_req req;
-
-	stat.fd = desc[sc->device->id];
-
-	scsi_for_each_sg(sc, sl, scsi_sg_count(sc), i) {
-		req.addr = __pa(sg_virt(sl));
-		req.len  = sl->length;
-		if (DBG)
-			printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n",
-			       mode == SSC_READ ? "read":"write", req.addr, offset,
-			       scsi_sg_count(sc) - i, sl->length);
-		ia64_ssc(stat.fd, 1, __pa(&req), offset, mode);
-		ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
-
-		/* should not happen in our case */
-		if (stat.count != req.len) {
-			sc->result = DID_ERROR << 16;
-			return;
-		}
-		offset +=  sl->length;
-	}
-	sc->result = GOOD;
-}
-
-/*
- * function handling both READ_6/WRITE_6 (non-scatter/gather mode)
- * commands.
- * Added 02/26/99 S.Eranian
- */
-static void
-simscsi_readwrite6 (struct scsi_cmnd *sc, int mode)
-{
-	unsigned long offset;
-
-	offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512;
-	simscsi_sg_readwrite(sc, mode, offset);
-}
-
-static size_t
-simscsi_get_disk_size (int fd)
-{
-	struct disk_stat stat;
-	size_t bit, sectors = 0;
-	struct disk_req req;
-	char buf[512];
-
-	/*
-	 * This is a bit kludgey: the simulator doesn't provide a
-	 * direct way of determining the disk size, so we do a binary
-	 * search, assuming a maximum disk size of 128GB.
-	 */
-	for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) {
-		req.addr = __pa(&buf);
-		req.len = sizeof(buf);
-		ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ);
-		stat.fd = fd;
-		ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION);
-		if (stat.count == sizeof(buf))
-			sectors |= bit;
-	}
-	return sectors - 1;	/* return last valid sector number */
-}
-
-static void
-simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
-{
-	unsigned long offset;
-
-	offset = (((unsigned long)sc->cmnd[2] << 24) 
-		| ((unsigned long)sc->cmnd[3] << 16)
-		| ((unsigned long)sc->cmnd[4] <<  8) 
-		| ((unsigned long)sc->cmnd[5] <<  0))*512UL;
-	simscsi_sg_readwrite(sc, mode, offset);
-}
-
-static int
-simscsi_queuecommand_lck (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
-{
-	unsigned int target_id = sc->device->id;
-	char fname[MAX_ROOT_LEN+16];
-	size_t disk_size;
-	char *buf;
-	char localbuf[36];
-#if DEBUG_SIMSCSI
-	register long sp asm ("sp");
-
-	if (DBG)
-		printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%u,sp=%lx,done=%p\n",
-		       target_id, sc->cmnd[0], sc->request->tag, sp, done);
-#endif
-
-	sc->result = DID_BAD_TARGET << 16;
-	sc->scsi_done = done;
-	if (target_id <= 15 && sc->device->lun == 0) {
-		switch (sc->cmnd[0]) {
-		      case INQUIRY:
-			if (scsi_bufflen(sc) < 35) {
-				break;
-			}
-			sprintf (fname, "%s%c", simscsi_root, 'a' + target_id);
-			desc[target_id] = ia64_ssc(__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS,
-						   0, 0, SSC_OPEN);
-			if (desc[target_id] < 0) {
-				/* disk doesn't exist... */
-				break;
-			}
-			buf = localbuf;
-			buf[0] = 0;	/* magnetic disk */
-			buf[1] = 0;	/* not a removable medium */
-			buf[2] = 2;	/* SCSI-2 compliant device */
-			buf[3] = 2;	/* SCSI-2 response data format */
-			buf[4] = 31;	/* additional length (bytes) */
-			buf[5] = 0;	/* reserved */
-			buf[6] = 0;	/* reserved */
-			buf[7] = 0;	/* various flags */
-			memcpy(buf + 8, "HP      SIMULATED DISK  0.00",  28);
-			scsi_sg_copy_from_buffer(sc, buf, 36);
-			sc->result = GOOD;
-			break;
-
-		      case TEST_UNIT_READY:
-			sc->result = GOOD;
-			break;
-
-		      case READ_6:
-			if (desc[target_id] < 0 )
-				break;
-			simscsi_readwrite6(sc, SSC_READ);
-			break;
-
-		      case READ_10:
-			if (desc[target_id] < 0 )
-				break;
-			simscsi_readwrite10(sc, SSC_READ);
-			break;
-
-		      case WRITE_6:
-			if (desc[target_id] < 0)
-				break;
-			simscsi_readwrite6(sc, SSC_WRITE);
-			break;
-
-		      case WRITE_10:
-			if (desc[target_id] < 0)
-				break;
-			simscsi_readwrite10(sc, SSC_WRITE);
-			break;
-
-		      case READ_CAPACITY:
-			if (desc[target_id] < 0 || scsi_bufflen(sc) < 8) {
-				break;
-			}
-			buf = localbuf;
-			disk_size = simscsi_get_disk_size(desc[target_id]);
-
-			buf[0] = (disk_size >> 24) & 0xff;
-			buf[1] = (disk_size >> 16) & 0xff;
-			buf[2] = (disk_size >>  8) & 0xff;
-			buf[3] = (disk_size >>  0) & 0xff;
-			/* set block size of 512 bytes: */
-			buf[4] = 0;
-			buf[5] = 0;
-			buf[6] = 2;
-			buf[7] = 0;
-			scsi_sg_copy_from_buffer(sc, buf, 8);
-			sc->result = GOOD;
-			break;
-
-		      case MODE_SENSE:
-		      case MODE_SENSE_10:
-			/* sd.c uses this to determine whether disk does write-caching. */
-			scsi_sg_copy_from_buffer(sc, (char *)empty_zero_page,
-						 PAGE_SIZE);
-			sc->result = GOOD;
-			break;
-
-		      case START_STOP:
-			printk(KERN_ERR "START_STOP\n");
-			break;
-
-		      default:
-			panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]);
-		}
-	}
-	if (sc->result == DID_BAD_TARGET) {
-		sc->result |= DRIVER_SENSE << 24;
-		sc->sense_buffer[0] = 0x70;
-		sc->sense_buffer[2] = 0x00;
-	}
-	if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) {
-		panic("Attempt to queue command while command is pending!!");
-	}
-	atomic_inc(&num_reqs);
-	queue[wr].sc = sc;
-	wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN;
-
-	tasklet_schedule(&simscsi_tasklet);
-	return 0;
-}
-
-static DEF_SCSI_QCMD(simscsi_queuecommand)
-
-static int
-simscsi_host_reset (struct scsi_cmnd *sc)
-{
-	printk(KERN_ERR "simscsi_host_reset: not implemented\n");
-	return 0;
-}
-
-static struct scsi_host_template driver_template = {
-	.name			= "simulated SCSI host adapter",
-	.proc_name		= "simscsi",
-	.queuecommand		= simscsi_queuecommand,
-	.eh_host_reset_handler	= simscsi_host_reset,
-	.bios_param		= simscsi_biosparam,
-	.can_queue		= SIMSCSI_REQ_QUEUE_LEN,
-	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
-	.max_sectors		= 1024,
-	.cmd_per_lun		= SIMSCSI_REQ_QUEUE_LEN,
-	.dma_boundary		= PAGE_SIZE - 1,
-};
-
-static int __init
-simscsi_init(void)
-{
-	int error;
-
-	host = scsi_host_alloc(&driver_template, 0);
-	if (!host)
-		return -ENOMEM;
-
-	error = scsi_add_host(host, NULL);
-	if (error)
-		goto free_host;
-	scsi_scan_host(host);
-	return 0;
-
- free_host:
-	scsi_host_put(host);
-	return error;
-}
-device_initcall(simscsi_init);
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
deleted file mode 100644
index 1a338e541334..000000000000
--- a/arch/ia64/hp/sim/simserial.c
+++ /dev/null
@@ -1,521 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Simulated Serial Driver (fake serial)
- *
- * This driver is mostly used for bringup purposes and will go away.
- * It has a strong dependency on the system console. All outputs
- * are rerouted to the same facility as the one used by printk which, in our
- * case means sys_sim.c console (goes via the simulator).
- *
- * Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co
- *	Stephane Eranian <eranian@hpl.hp.com>
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/capability.h>
-#include <linux/circ_buf.h>
-#include <linux/console.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/serial.h>
-#include <linux/sysrq.h>
-#include <linux/uaccess.h>
-
-#include <asm/hpsim.h>
-
-#include "hpsim_ssc.h"
-
-#undef SIMSERIAL_DEBUG	/* define this to get some debug information */
-
-#define KEYBOARD_INTR	3	/* must match with simulator! */
-
-#define NR_PORTS	1	/* only one port for now */
-
-struct serial_state {
-	struct tty_port port;
-	struct circ_buf xmit;
-	int irq;
-	int x_char;
-};
-
-static struct serial_state rs_table[NR_PORTS];
-
-struct tty_driver *hp_simserial_driver;
-
-static struct console *console;
-
-static void receive_chars(struct tty_port *port)
-{
-	unsigned char ch;
-	static unsigned char seen_esc = 0;
-
-	while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) {
-		if (ch == 27 && seen_esc == 0) {
-			seen_esc = 1;
-			continue;
-		} else if (seen_esc == 1 && ch == 'O') {
-			seen_esc = 2;
-			continue;
-		} else if (seen_esc == 2) {
-			if (ch == 'P') /* F1 */
-				show_state();
-#ifdef CONFIG_MAGIC_SYSRQ
-			if (ch == 'S') { /* F4 */
-				do {
-					ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR);
-				} while (!ch);
-				handle_sysrq(ch);
-			}
-#endif
-			seen_esc = 0;
-			continue;
-		}
-		seen_esc = 0;
-
-		if (tty_insert_flip_char(port, ch, TTY_NORMAL) == 0)
-			break;
-	}
-	tty_flip_buffer_push(port);
-}
-
-/*
- * This is the serial driver's interrupt routine for a single port
- */
-static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
-{
-	struct serial_state *info = dev_id;
-
-	receive_chars(&info->port);
-
-	return IRQ_HANDLED;
-}
-
-/*
- * -------------------------------------------------------------------
- * Here ends the serial interrupt routines.
- * -------------------------------------------------------------------
- */
-
-static int rs_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	struct serial_state *info = tty->driver_data;
-	unsigned long flags;
-
-	if (!info->xmit.buf)
-		return 0;
-
-	local_irq_save(flags);
-	if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) == 0) {
-		local_irq_restore(flags);
-		return 0;
-	}
-	info->xmit.buf[info->xmit.head] = ch;
-	info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1);
-	local_irq_restore(flags);
-	return 1;
-}
-
-static void transmit_chars(struct tty_struct *tty, struct serial_state *info,
-		int *intr_done)
-{
-	int count;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	if (info->x_char) {
-		char c = info->x_char;
-
-		console->write(console, &c, 1);
-
-		info->x_char = 0;
-
-		goto out;
-	}
-
-	if (info->xmit.head == info->xmit.tail || tty->stopped) {
-#ifdef SIMSERIAL_DEBUG
-		printk("transmit_chars: head=%d, tail=%d, stopped=%d\n",
-		       info->xmit.head, info->xmit.tail, tty->stopped);
-#endif
-		goto out;
-	}
-	/*
-	 * We removed the loop and try to do it in to chunks. We need
-	 * 2 operations maximum because it's a ring buffer.
-	 *
-	 * First from current to tail if possible.
-	 * Then from the beginning of the buffer until necessary
-	 */
-
-	count = min(CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE),
-		    SERIAL_XMIT_SIZE - info->xmit.tail);
-	console->write(console, info->xmit.buf+info->xmit.tail, count);
-
-	info->xmit.tail = (info->xmit.tail+count) & (SERIAL_XMIT_SIZE-1);
-
-	/*
-	 * We have more at the beginning of the buffer
-	 */
-	count = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-	if (count) {
-		console->write(console, info->xmit.buf, count);
-		info->xmit.tail += count;
-	}
-out:
-	local_irq_restore(flags);
-}
-
-static void rs_flush_chars(struct tty_struct *tty)
-{
-	struct serial_state *info = tty->driver_data;
-
-	if (info->xmit.head == info->xmit.tail || tty->stopped ||
-			!info->xmit.buf)
-		return;
-
-	transmit_chars(tty, info, NULL);
-}
-
-static int rs_write(struct tty_struct * tty,
-		    const unsigned char *buf, int count)
-{
-	struct serial_state *info = tty->driver_data;
-	int	c, ret = 0;
-	unsigned long flags;
-
-	if (!info->xmit.buf)
-		return 0;
-
-	local_irq_save(flags);
-	while (1) {
-		c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-		if (count < c)
-			c = count;
-		if (c <= 0) {
-			break;
-		}
-		memcpy(info->xmit.buf + info->xmit.head, buf, c);
-		info->xmit.head = ((info->xmit.head + c) &
-				   (SERIAL_XMIT_SIZE-1));
-		buf += c;
-		count -= c;
-		ret += c;
-	}
-	local_irq_restore(flags);
-	/*
-	 * Hey, we transmit directly from here in our case
-	 */
-	if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) &&
-			!tty->stopped)
-		transmit_chars(tty, info, NULL);
-
-	return ret;
-}
-
-static int rs_write_room(struct tty_struct *tty)
-{
-	struct serial_state *info = tty->driver_data;
-
-	return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-}
-
-static int rs_chars_in_buffer(struct tty_struct *tty)
-{
-	struct serial_state *info = tty->driver_data;
-
-	return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-}
-
-static void rs_flush_buffer(struct tty_struct *tty)
-{
-	struct serial_state *info = tty->driver_data;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	info->xmit.head = info->xmit.tail = 0;
-	local_irq_restore(flags);
-
-	tty_wakeup(tty);
-}
-
-/*
- * This function is used to send a high-priority XON/XOFF character to
- * the device
- */
-static void rs_send_xchar(struct tty_struct *tty, char ch)
-{
-	struct serial_state *info = tty->driver_data;
-
-	info->x_char = ch;
-	if (ch) {
-		/*
-		 * I guess we could call console->write() directly but
-		 * let's do that for now.
-		 */
-		transmit_chars(tty, info, NULL);
-	}
-}
-
-/*
- * ------------------------------------------------------------
- * rs_throttle()
- *
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void rs_throttle(struct tty_struct * tty)
-{
-	if (I_IXOFF(tty))
-		rs_send_xchar(tty, STOP_CHAR(tty));
-
-	printk(KERN_INFO "simrs_throttle called\n");
-}
-
-static void rs_unthrottle(struct tty_struct * tty)
-{
-	struct serial_state *info = tty->driver_data;
-
-	if (I_IXOFF(tty)) {
-		if (info->x_char)
-			info->x_char = 0;
-		else
-			rs_send_xchar(tty, START_CHAR(tty));
-	}
-	printk(KERN_INFO "simrs_unthrottle called\n");
-}
-
-static int rs_setserial(struct tty_struct *tty, struct serial_struct *ss)
-{
-	return 0;
-}
-
-static int rs_getserial(struct tty_struct *tty, struct serial_struct *ss)
-{
-	return 0;
-}
-
-static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
-{
-	if ((cmd != TIOCSERCONFIG) && (cmd != TIOCMIWAIT)) {
-		if (tty_io_error(tty))
-		    return -EIO;
-	}
-
-	switch (cmd) {
-	case TIOCMIWAIT:
-		return 0;
-	case TIOCSERCONFIG:
-	case TIOCSERGETLSR: /* Get line status register */
-		return -EINVAL;
-	}
-	return -ENOIOCTLCMD;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct tty_port *port)
-{
-	struct serial_state *info = container_of(port, struct serial_state,
-			port);
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (info->irq)
-		free_irq(info->irq, info);
-
-	if (info->xmit.buf) {
-		free_page((unsigned long) info->xmit.buf);
-		info->xmit.buf = NULL;
-	}
-	local_irq_restore(flags);
-}
-
-static void rs_close(struct tty_struct *tty, struct file * filp)
-{
-	struct serial_state *info = tty->driver_data;
-
-	tty_port_close(&info->port, tty, filp);
-}
-
-static void rs_hangup(struct tty_struct *tty)
-{
-	struct serial_state *info = tty->driver_data;
-
-	rs_flush_buffer(tty);
-	tty_port_hangup(&info->port);
-}
-
-static int activate(struct tty_port *port, struct tty_struct *tty)
-{
-	struct serial_state *state = container_of(port, struct serial_state,
-			port);
-	unsigned long flags, page;
-	int retval = 0;
-
-	page = get_zeroed_page(GFP_KERNEL);
-	if (!page)
-		return -ENOMEM;
-
-	local_irq_save(flags);
-
-	if (state->xmit.buf)
-		free_page(page);
-	else
-		state->xmit.buf = (unsigned char *) page;
-
-	if (state->irq) {
-		retval = request_irq(state->irq, rs_interrupt_single, 0,
-				"simserial", state);
-		if (retval)
-			goto errout;
-	}
-
-	state->xmit.head = state->xmit.tail = 0;
-errout:
-	local_irq_restore(flags);
-	return retval;
-}
-
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * enables interrupts for a serial port, linking in its async structure into
- * the IRQ chain.   It also performs the serial-specific
- * initialization for the tty structure.
- */
-static int rs_open(struct tty_struct *tty, struct file * filp)
-{
-	struct serial_state *info = rs_table + tty->index;
-	struct tty_port *port = &info->port;
-
-	tty->driver_data = info;
-	port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
-	/*
-	 * figure out which console to use (should be one already)
-	 */
-	console = console_drivers;
-	while (console) {
-		if ((console->flags & CON_ENABLED) && console->write) break;
-		console = console->next;
-	}
-
-	return tty_port_open(port, tty, filp);
-}
-
-/*
- * /proc fs routines....
- */
-
-static int rs_proc_show(struct seq_file *m, void *v)
-{
-	int i;
-
-	seq_printf(m, "simserinfo:1.0\n");
-	for (i = 0; i < NR_PORTS; i++)
-		seq_printf(m, "%d: uart:16550 port:3F8 irq:%d\n",
-		       i, rs_table[i].irq);
-	return 0;
-}
-
-static const struct tty_operations hp_ops = {
-	.open = rs_open,
-	.close = rs_close,
-	.write = rs_write,
-	.put_char = rs_put_char,
-	.flush_chars = rs_flush_chars,
-	.write_room = rs_write_room,
-	.chars_in_buffer = rs_chars_in_buffer,
-	.flush_buffer = rs_flush_buffer,
-	.ioctl = rs_ioctl,
-	.throttle = rs_throttle,
-	.unthrottle = rs_unthrottle,
-	.send_xchar = rs_send_xchar,
-	.set_serial = rs_setserial,
-	.get_serial = rs_getserial,
-	.hangup = rs_hangup,
-	.proc_show = rs_proc_show,
-};
-
-static const struct tty_port_operations hp_port_ops = {
-	.activate = activate,
-	.shutdown = shutdown,
-};
-
-static int __init simrs_init(void)
-{
-	struct serial_state *state;
-	int retval;
-
-	if (!ia64_platform_is("hpsim"))
-		return -ENODEV;
-
-	hp_simserial_driver = alloc_tty_driver(NR_PORTS);
-	if (!hp_simserial_driver)
-		return -ENOMEM;
-
-	printk(KERN_INFO "SimSerial driver with no serial options enabled\n");
-
-	/* Initialize the tty_driver structure */
-
-	hp_simserial_driver->driver_name = "simserial";
-	hp_simserial_driver->name = "ttyS";
-	hp_simserial_driver->major = TTY_MAJOR;
-	hp_simserial_driver->minor_start = 64;
-	hp_simserial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	hp_simserial_driver->subtype = SERIAL_TYPE_NORMAL;
-	hp_simserial_driver->init_termios = tty_std_termios;
-	hp_simserial_driver->init_termios.c_cflag =
-		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(hp_simserial_driver, &hp_ops);
-
-	state = rs_table;
-	tty_port_init(&state->port);
-	state->port.ops = &hp_port_ops;
-	state->port.close_delay = 0; /* XXX really 0? */
-
-	retval = hpsim_get_irq(KEYBOARD_INTR);
-	if (retval < 0) {
-		printk(KERN_ERR "%s: out of interrupt vectors!\n",
-				__func__);
-		goto err_free_tty;
-	}
-
-	state->irq = retval;
-
-	/* the port is imaginary */
-	printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq);
-
-	tty_port_link_device(&state->port, hp_simserial_driver, 0);
-	retval = tty_register_driver(hp_simserial_driver);
-	if (retval) {
-		printk(KERN_ERR "Couldn't register simserial driver\n");
-		goto err_free_tty;
-	}
-
-	return 0;
-err_free_tty:
-	put_tty_driver(hp_simserial_driver);
-	tty_port_destroy(&state->port);
-	return retval;
-}
-
-#ifndef MODULE
-__initcall(simrs_init);
-#endif