Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "The APM X-Gene platform is now maintained by folks from Ampere
  computing that took over the product line a while ago, this gets
  reflected in the MAINTAINERS file.

  Cleanups continue on the older mach-davinci and mach-pxa platform, to
  get them to be more like the modern ones. For pxa, we now remove the
  Raumfeld platform code as it now works with device tree based booting.

  i.MX adds a couple new features for the i.MX7ULP SoC

  Mediatek gains support for a new SoC: MT7629 is a new wireless router
  platform, following MT7623.

  Aside from those, there are the usual minor cleanups and bugfixes
  across several platforms"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits)
  MAINTAINERS: Update Ampere email address
  usb: ohci-da8xx: remove unused callbacks from platform data
  ARM: davinci: da830-evm: remove legacy usb helpers
  ARM: davinci: omapl138-hawk: remove legacy usb helpers
  usb: ohci-da8xx: add vbus and overcurrent gpios
  ARM: davinci: da830-evm: use gpio lookup entries for usb gpios
  ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios
  usb: ohci-da8xx: add a helper pointer to &pdev->dev
  usb: ohci-da8xx: add a new line after local variables
  arm64: meson: enable g12a clock controller
  MAINTAINERS: Add entry for uDPU board
  ARM: davinci: da850-evm: use GPIO hogs instead of the legacy API
  arm: mediatek: add MT7629 smp bring up code
  Revert "ARM: mediatek: add MT7623a smp bringup code"
  dt-bindings: soc: fix typo of MT8173 power dt-bindings
  ARM: meson: remove COMMON_CLK_AMLOGIC selection
  arm64: meson: remove COMMON_CLK_AMLOGIC selection
  ARM: lpc32xx: remove platform data of ARM PL111 LCD controller
  ARM: lpc32xx: remove platform data of ARM PL180 SD/MMC controller
  ARM: lpc32xx: Use kmemdup to replace duplicating its implementation
  ...

34 files changed, 297 insertions, 1767 deletions

diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 6bb506edb1f5..e96a9743b220 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -66,9 +66,6 @@ CONFIG_MACH_MIOA701=y
 CONFIG_PXA_EZX=y
 CONFIG_MACH_MP900C=y
 CONFIG_ARCH_PXA_PALM=y
-CONFIG_MACH_RAUMFELD_RC=y
-CONFIG_MACH_RAUMFELD_CONNECTOR=y
-CONFIG_MACH_RAUMFELD_SPEAKER=y
 CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_POODLE=y
 CONFIG_MACH_CORGI=y
@@ -498,7 +495,6 @@ CONFIG_SND_PXA2XX_SOC_E800=m
 CONFIG_SND_PXA2XX_SOC_EM_X270=m
 CONFIG_SND_PXA2XX_SOC_PALM27X=y
 CONFIG_SND_SOC_ZYLONITE=m
-CONFIG_SND_SOC_RAUMFELD=m
 CONFIG_SND_PXA2XX_SOC_HX4700=m
 CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
 CONFIG_SND_PXA2XX_SOC_MIOA701=m
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
deleted file mode 100644
index 2dd56e9a484e..000000000000
--- a/arch/arm/configs/raumfeld_defconfig
+++ /dev/null
@@ -1,197 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_RAUMFELD_RC=y
-CONFIG_MACH_RAUMFELD_CONNECTOR=y
-CONFIG_MACH_RAUMFELD_SPEAKER=y
-CONFIG_NO_HZ=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_CMDLINE="console=ttyS0,115200 rw"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_IDLE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MARVELL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_ISL29003=y
-CONFIG_IIO=y
-CONFIG_AD5446=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_NET1080 is not set
-CONFIG_USB_NET_MCS7830=y
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_EETI=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_W1_MASTER_GPIO=m
-CONFIG_POWER_SUPPLY=y
-CONFIG_PDA_POWER=y
-CONFIG_BATTERY_DS2760=m
-CONFIG_SENSORS_LIS3_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_MAX8660=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_SOC_RAUMFELD=y
-CONFIG_HID_DRAGONRISE=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_LT3593=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_DMADEVICES=y
-CONFIG_UIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_FSCACHE=y
-CONFIG_FSCACHE_STATS=y
-CONFIG_CACHEFILES=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFS_FSCACHE=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index c4da635ee4ce..3a2124212a7f 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
@@ -52,62 +52,19 @@ static const short da830_evm_usb11_pins[] = {
 	-1
 };
 
-static da8xx_ocic_handler_t da830_evm_usb_ocic_handler;
-
-static int da830_evm_usb_set_power(unsigned port, int on)
-{
-	gpio_set_value(ON_BD_USB_DRV, on);
-	return 0;
-}
-
-static int da830_evm_usb_get_power(unsigned port)
-{
-	return gpio_get_value(ON_BD_USB_DRV);
-}
-
-static int da830_evm_usb_get_oci(unsigned port)
-{
-	return !gpio_get_value(ON_BD_USB_OVC);
-}
-
-static irqreturn_t da830_evm_usb_ocic_irq(int, void *);
-
-static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
-	int irq 	= gpio_to_irq(ON_BD_USB_OVC);
-	int error	= 0;
-
-	if (handler != NULL) {
-		da830_evm_usb_ocic_handler = handler;
-
-		error = request_irq(irq, da830_evm_usb_ocic_irq,
-				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				    "OHCI over-current indicator", NULL);
-		if (error)
-			pr_err("%s: could not request IRQ to watch over-current indicator changes\n",
-			       __func__);
-	} else
-		free_irq(irq, NULL);
-
-	return error;
-}
+static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = {
+	.dev_id		= "ohci-da8xx",
+	.table = {
+		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0),
+		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
+	},
+};
 
 static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
-	.set_power	= da830_evm_usb_set_power,
-	.get_power	= da830_evm_usb_get_power,
-	.get_oci	= da830_evm_usb_get_oci,
-	.ocic_notify	= da830_evm_usb_ocic_notify,
-
 	/* TPS2065 switch @ 5V */
 	.potpgt		= (3 + 1) / 2,	/* 3 ms max */
 };
 
-static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id)
-{
-	da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1);
-	return IRQ_HANDLED;
-}
-
 static __init void da830_evm_usb_init(void)
 {
 	int ret;
@@ -142,21 +99,7 @@ static __init void da830_evm_usb_init(void)
 		return;
 	}
 
-	ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV");
-	if (ret) {
-		pr_err("%s: failed to request GPIO for USB 1.1 port power control: %d\n",
-		       __func__, ret);
-		return;
-	}
-	gpio_direction_output(ON_BD_USB_DRV, 0);
-
-	ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
-	if (ret) {
-		pr_err("%s: failed to request GPIO for USB 1.1 port over-current indicator: %d\n",
-		       __func__, ret);
-		return;
-	}
-	gpio_direction_input(ON_BD_USB_OVC);
+	gpiod_add_lookup_table(&da830_evm_usb_gpio_lookup);
 
 	ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
 	if (ret)
@@ -457,12 +400,9 @@ static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data da830_evm_i2c_eeprom_info = {
-	.byte_len	= SZ_256K / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup		= davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry da830_evm_i2c_eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
@@ -496,7 +436,7 @@ static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
 static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &da830_evm_i2c_eeprom_info,
+		.properties = da830_evm_i2c_eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 44bca048dfd0..56d0e0257048 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -150,32 +150,6 @@ static struct spi_board_info da850evm_spi_info[] = {
 	},
 };
 
-#ifdef CONFIG_MTD
-static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	size_t retlen;
-
-	if (!strcmp(mtd->name, "MAC-Address")) {
-		mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
-		if (retlen == ETH_ALEN)
-			pr_info("Read MAC addr from SPI Flash: %pM\n",
-				mac_addr);
-	}
-}
-
-static struct mtd_notifier da850evm_spi_notifier = {
-	.add	= da850_evm_m25p80_notify_add,
-};
-
-static void da850_evm_setup_mac_addr(void)
-{
-	register_mtd_user(&da850evm_spi_notifier);
-}
-#else
-static void da850_evm_setup_mac_addr(void) { }
-#endif
-
 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
 		.name           = "bootloaders + env",
@@ -1064,6 +1038,17 @@ static const short da850_evm_rmii_pins[] = {
 	-1
 };
 
+static struct gpiod_hog da850_evm_emac_gpio_hogs[] = {
+	{
+		.chip_label	= "davinci_gpio",
+		.chip_hwnum	= DA850_MII_MDIO_CLKEN_PIN,
+		.line_name	= "mdio_clk_en",
+		.lflags		= 0,
+		/* dflags set in da850_evm_config_emac() */
+	},
+	{ }
+};
+
 static int __init da850_evm_config_emac(void)
 {
 	void __iomem *cfg_chip3_base;
@@ -1102,14 +1087,9 @@ static int __init da850_evm_config_emac(void)
 	if (ret)
 		pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
 
-	ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
-	if (ret) {
-		pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN);
-		return ret;
-	}
-
-	/* Enable/Disable MII MDIO clock */
-	gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
+	da850_evm_emac_gpio_hogs[0].dflags = rmii_en ? GPIOD_OUT_HIGH
+						     : GPIOD_OUT_LOW;
+	gpiod_add_hogs(da850_evm_emac_gpio_hogs);
 
 	soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID;
 
@@ -1494,8 +1474,6 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
 
-	da850_evm_setup_mac_addr();
-
 	ret = da8xx_register_rproc();
 	if (ret)
 		pr_warn("%s: dsp/rproc registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index e3b0b701e395..f21dc8d3b28c 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -18,7 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -225,18 +225,15 @@ static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len       = (256*1024) / 8,
-	.page_size      = 64,
-	.flags          = AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 static struct i2c_board_info i2c_info[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &eeprom_info,
+		.properties = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index b80c4ee76217..ecd30643c2c4 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -16,8 +16,8 @@
 #include <linux/gpio/machine.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/at24.h>
 #include <linux/platform_data/gpio-davinci.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
@@ -532,12 +532,9 @@ static struct nvmem_cell_lookup dm644evm_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len	= (256*1024) / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 /*
@@ -647,7 +644,7 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &eeprom_info,
+		.properties = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic33", 0x1b),
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 8d5be6dd2019..02b57face113 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/platform_data/pcf857x.h>
 #include <linux/platform_data/ti-aemif.h>
 
@@ -364,12 +364,9 @@ static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len       = (256*1024) / 8,
-	.page_size      = 64,
-	.flags          = AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 #endif
 
@@ -440,7 +437,7 @@ static void evm_init_cpld(void)
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data  = &eeprom_info,
+		.properties  = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("pcf8574a", 0x38),
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 8df16e81b69e..a381b26328d8 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -14,11 +14,13 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/mtd/partitions.h>
+#include <linux/notifier.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/nvmem-provider.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
 #include <linux/etherdevice.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -117,11 +119,15 @@ static void mityomapl138_cpufreq_init(const char *partnum)
 static void mityomapl138_cpufreq_init(const char *partnum) { }
 #endif
 
-static void read_factory_config(struct nvmem_device *nvmem, void *context)
+static int read_factory_config(struct notifier_block *nb,
+			       unsigned long event, void *data)
 {
 	int ret;
 	const char *partnum = NULL;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct nvmem_device *nvmem = data;
+
+	if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0)
+		return NOTIFY_DONE;
 
 	if (!IS_BUILTIN(CONFIG_NVMEM)) {
 		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
@@ -147,21 +153,20 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 		goto bad_config;
 	}
 
-	pr_info("Found MAC = %pM\n", factory_config.mac);
-	if (is_valid_ether_addr(factory_config.mac))
-		memcpy(soc_info->emac_pdata->mac_addr,
-			factory_config.mac, ETH_ALEN);
-	else
-		pr_warn("Invalid MAC found in factory config block\n");
-
 	partnum = factory_config.partnum;
 	pr_info("Part Number = %s\n", partnum);
 
 bad_config:
 	/* default maximum speed is valid for all platforms */
 	mityomapl138_cpufreq_init(partnum);
+
+	return NOTIFY_STOP;
 }
 
+static struct notifier_block mityomapl138_nvmem_notifier = {
+	.notifier_call = read_factory_config,
+};
+
 /*
  * We don't define a cell for factory config as it will be accessed from the
  * board file using the nvmem notifier chain.
@@ -187,12 +192,10 @@ static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data mityomapl138_fd_chip = {
-	.byte_len	= 256,
-	.page_size	= 8,
-	.flags		= AT24_FLAG_READONLY | AT24_FLAG_IRUGO,
-	.setup		= read_factory_config,
-	.context	= NULL,
+static const struct property_entry mityomapl138_fd_chip_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 8),
+	PROPERTY_ENTRY_BOOL("read-only"),
+	{ }
 };
 
 static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
@@ -321,7 +324,7 @@ static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
 	},
 	{
 		I2C_BOARD_INFO("24c02", 0x50),
-		.platform_data = &mityomapl138_fd_chip,
+		.properties = mityomapl138_fd_chip_properties,
 	},
 };
 
@@ -569,6 +572,7 @@ static void __init mityomapl138_init(void)
 
 	davinci_serial_init(da8xx_serial_device);
 
+	nvmem_register_notifier(&mityomapl138_nvmem_notifier);
 	nvmem_add_cell_table(&mityomapl138_nvmem_cell_table);
 	nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1);
 
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 94c4f126ef86..88a0c62eee86 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -294,66 +294,24 @@ static int omapl138_hawk_register_aemif(void)
 	return platform_device_register(&omapl138_hawk_aemif_device);
 }
 
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id);
-static da8xx_ocic_handler_t hawk_usb_ocic_handler;
-
 static const short da850_hawk_usb11_pins[] = {
 	DA850_GPIO2_4, DA850_GPIO6_13,
 	-1
 };
 
-static int hawk_usb_set_power(unsigned port, int on)
-{
-	gpio_set_value(DA850_USB1_VBUS_PIN, on);
-	return 0;
-}
-
-static int hawk_usb_get_power(unsigned port)
-{
-	return gpio_get_value(DA850_USB1_VBUS_PIN);
-}
-
-static int hawk_usb_get_oci(unsigned port)
-{
-	return !gpio_get_value(DA850_USB1_OC_PIN);
-}
-
-static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
-	int irq         = gpio_to_irq(DA850_USB1_OC_PIN);
-	int error       = 0;
-
-	if (handler != NULL) {
-		hawk_usb_ocic_handler = handler;
-
-		error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
-					IRQF_TRIGGER_RISING |
-					IRQF_TRIGGER_FALLING,
-					"OHCI over-current indicator", NULL);
-		if (error)
-			pr_err("%s: could not request IRQ to watch "
-				"over-current indicator changes\n", __func__);
-	} else {
-		free_irq(irq, NULL);
-	}
-	return error;
-}
+static struct gpiod_lookup_table hawk_usb_gpio_lookup = {
+	.dev_id		= "ohci-da8xx",
+	.table = {
+		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0),
+		GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
+	},
+};
 
 static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
-	.set_power      = hawk_usb_set_power,
-	.get_power      = hawk_usb_get_power,
-	.get_oci        = hawk_usb_get_oci,
-	.ocic_notify    = hawk_usb_ocic_notify,
 	/* TPS2087 switch @ 5V */
 	.potpgt         = (3 + 1) / 2,  /* 3 ms max */
 };
 
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id)
-{
-	hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1);
-	return IRQ_HANDLED;
-}
-
 static __init void omapl138_hawk_usb_init(void)
 {
 	int ret;
@@ -374,34 +332,13 @@ static __init void omapl138_hawk_usb_init(void)
 		pr_warn("%s: USB PHY registration failed: %d\n",
 			__func__, ret);
 
-	ret = gpio_request_one(DA850_USB1_VBUS_PIN,
-			GPIOF_DIR_OUT, "USB1 VBUS");
-	if (ret < 0) {
-		pr_err("%s: failed to request GPIO for USB 1.1 port "
-			"power control: %d\n", __func__, ret);
-		return;
-	}
-
-	ret = gpio_request_one(DA850_USB1_OC_PIN,
-			GPIOF_DIR_IN, "USB1 OC");
-	if (ret < 0) {
-		pr_err("%s: failed to request GPIO for USB 1.1 port "
-			"over-current indicator: %d\n", __func__, ret);
-		goto usb11_setup_oc_fail;
-	}
+	gpiod_add_lookup_table(&hawk_usb_gpio_lookup);
 
 	ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
-	if (ret) {
+	if (ret)
 		pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
-		goto usb11_setup_fail;
-	}
 
 	return;
-
-usb11_setup_fail:
-	gpio_free(DA850_USB1_OC_PIN);
-usb11_setup_oc_fail:
-	gpio_free(DA850_USB1_VBUS_PIN);
 }
 
 static __init void omapl138_hawk_init(void)
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 792bb84d5011..ff14de1396c8 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
@@ -92,16 +92,15 @@ static struct platform_device davinci_sffsdr_nandflash_device = {
 	.resource	= davinci_sffsdr_nandflash_resource,
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len	= (64*1024) / 8,
-	.page_size	= 32,
-	.flags		= AT24_FLAG_ADDR16,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 32),
+	{ }
 };
 
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
-		I2C_BOARD_INFO("24lc64", 0x50),
-		.platform_data	= &eeprom_info,
+		I2C_BOARD_INFO("24c64", 0x50),
+		.properties = eeprom_properties,
 	},
 	/* Other I2C devices:
 	 * MSP430,  addr 0x23 (not used)
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index e1d0f0d841ff..0c638fe15dcb 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -26,21 +26,6 @@ EXPORT_SYMBOL(davinci_soc_info);
 void __iomem *davinci_intc_base;
 int davinci_intc_type;
 
-void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	off_t offset = (off_t)context;
-
-	if (!IS_BUILTIN(CONFIG_NVMEM)) {
-		pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n");
-		return;
-	}
-
-	/* Read MAC addr from EEPROM */
-	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
-		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
-}
-
 static int __init davinci_init_id(struct davinci_soc_info *soc_info)
 {
 	int			i;
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c6a533699b00..85b74ac943f0 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -26,7 +26,6 @@
 #include <mach/gpio-ep93xx.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/gpio-ep93xx.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index c39ffd2e2fe6..b6da7edbbd2f 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -336,9 +336,9 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		/* wait max 10 ms until cpu1 is on */
 		while (exynos_cpu_power_state(core_id)
 		       != S5P_CORE_LOCAL_PWR_EN) {
-			if (timeout-- == 0)
+			if (timeout == 0)
 				break;
-
+			timeout--;
 			mdelay(1);
 		}
 
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 8af2f7e91d13..35ff620537e6 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -29,9 +29,10 @@ obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
 obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sx.o
 obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o
 obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o
+obj-$(CONFIG_SOC_IMX7ULP) += cpuidle-imx7ulp.o
 endif
 
-ifdef CONFIG_SND_IMX_SOC
+ifdef CONFIG_SND_SOC_IMX_PCM_FIQ
 obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index bc915e5b4d56..c51764a85fd7 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -72,6 +72,15 @@ enum mxc_cpu_pwr_mode {
 	STOP_POWER_OFF,		/* STOP + SRPG */
 };
 
+enum ulp_cpu_pwr_mode {
+	ULP_PM_HSRUN,    /* High speed run mode */
+	ULP_PM_RUN,      /* Run mode */
+	ULP_PM_WAIT,     /* Wait mode */
+	ULP_PM_STOP,     /* Stop mode */
+	ULP_PM_VLPS,     /* Very low power stop mode */
+	ULP_PM_VLLS,     /* very low leakage stop mode */
+};
+
 void imx_enable_cpu(int cpu, bool enable);
 void imx_set_cpu_jump(int cpu, void *jump_addr);
 u32 imx_get_cpu_arg(int cpu);
@@ -98,6 +107,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode);
 void imx6_set_int_mem_clk_lpm(bool enable);
 void imx6sl_set_wait_clk(bool enter);
 int imx_mmdc_get_ddr_type(void);
+int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode);
 
 void imx_cpu_die(unsigned int cpu);
 int imx_cpu_kill(unsigned int cpu);
diff --git a/arch/arm/mach-imx/cpuidle-imx7ulp.c b/arch/arm/mach-imx/cpuidle-imx7ulp.c
new file mode 100644
index 000000000000..ca86c967d19e
--- /dev/null
+++ b/arch/arm/mach-imx/cpuidle-imx7ulp.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ *   Anson Huang <Anson.Huang@nxp.com>
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/module.h>
+#include <asm/cpuidle.h>
+
+#include "common.h"
+#include "cpuidle.h"
+
+static int imx7ulp_enter_wait(struct cpuidle_device *dev,
+			    struct cpuidle_driver *drv, int index)
+{
+	if (index == 1)
+		imx7ulp_set_lpm(ULP_PM_WAIT);
+	else
+		imx7ulp_set_lpm(ULP_PM_STOP);
+
+	cpu_do_idle();
+
+	imx7ulp_set_lpm(ULP_PM_RUN);
+
+	return index;
+}
+
+static struct cpuidle_driver imx7ulp_cpuidle_driver = {
+	.name = "imx7ulp_cpuidle",
+	.owner = THIS_MODULE,
+	.states = {
+		/* WFI */
+		ARM_CPUIDLE_WFI_STATE,
+		/* WAIT */
+		{
+			.exit_latency = 50,
+			.target_residency = 75,
+			.enter = imx7ulp_enter_wait,
+			.name = "WAIT",
+			.desc = "PSTOP2",
+		},
+		/* STOP */
+		{
+			.exit_latency = 100,
+			.target_residency = 150,
+			.enter = imx7ulp_enter_wait,
+			.name = "STOP",
+			.desc = "PSTOP1",
+		},
+	},
+	.state_count = 3,
+	.safe_state_index = 0,
+};
+
+int __init imx7ulp_cpuidle_init(void)
+{
+	return cpuidle_register(&imx7ulp_cpuidle_driver, NULL);
+}
diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h
index f9140128ba05..7694c8f810a4 100644
--- a/arch/arm/mach-imx/cpuidle.h
+++ b/arch/arm/mach-imx/cpuidle.h
@@ -15,6 +15,7 @@ extern int imx5_cpuidle_init(void);
 extern int imx6q_cpuidle_init(void);
 extern int imx6sl_cpuidle_init(void);
 extern int imx6sx_cpuidle_init(void);
+extern int imx7ulp_cpuidle_init(void);
 #else
 static inline int imx5_cpuidle_init(void)
 {
@@ -32,4 +33,8 @@ static inline int imx6sx_cpuidle_init(void)
 {
 	return 0;
 }
+static inline int imx7ulp_cpuidle_init(void)
+{
+	return 0;
+}
 #endif
diff --git a/arch/arm/mach-imx/mach-imx7ulp.c b/arch/arm/mach-imx/mach-imx7ulp.c
index 33937ebf66b5..11ac71aaf965 100644
--- a/arch/arm/mach-imx/mach-imx7ulp.c
+++ b/arch/arm/mach-imx/mach-imx7ulp.c
@@ -6,17 +6,57 @@
  */
 
 #include <linux/irqchip.h>
+#include <linux/mfd/syscon.h>
 #include <linux/of_platform.h>
+#include <linux/regmap.h>
 #include <asm/mach/arch.h>
 
 #include "common.h"
+#include "cpuidle.h"
 #include "hardware.h"
 
+#define SIM_JTAG_ID_REG		0x8c
+
+static void __init imx7ulp_set_revision(void)
+{
+	struct regmap *sim;
+	u32 revision;
+
+	sim = syscon_regmap_lookup_by_compatible("fsl,imx7ulp-sim");
+	if (IS_ERR(sim)) {
+		pr_warn("failed to find fsl,imx7ulp-sim regmap!\n");
+		return;
+	}
+
+	if (regmap_read(sim, SIM_JTAG_ID_REG, &revision)) {
+		pr_warn("failed to read sim regmap!\n");
+		return;
+	}
+
+	/*
+	 * bit[31:28] of JTAG_ID register defines revision as below from B0:
+	 * 0001        B0
+	 * 0010        B1
+	 */
+	switch (revision >> 28) {
+	case 1:
+		imx_set_soc_revision(IMX_CHIP_REVISION_2_0);
+		break;
+	case 2:
+		imx_set_soc_revision(IMX_CHIP_REVISION_2_1);
+		break;
+	default:
+		imx_set_soc_revision(IMX_CHIP_REVISION_1_0);
+		break;
+	}
+}
+
 static void __init imx7ulp_init_machine(void)
 {
 	imx7ulp_pm_init();
 
 	mxc_set_cpu_type(MXC_CPU_IMX7ULP);
+	imx7ulp_set_revision();
 	of_platform_default_populate(NULL, NULL, imx_soc_device_init());
 }
 
@@ -25,7 +65,13 @@ static const char *const imx7ulp_dt_compat[] __initconst = {
 	NULL,
 };
 
+static void __init imx7ulp_init_late(void)
+{
+	imx7ulp_cpuidle_init();
+}
+
 DT_MACHINE_START(IMX7ulp, "Freescale i.MX7ULP (Device Tree)")
 	.init_machine	= imx7ulp_init_machine,
 	.dt_compat	= imx7ulp_dt_compat,
+	.init_late	= imx7ulp_init_late,
 MACHINE_END
diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c
index cf6a380c2b8d..7b2f7387e662 100644
--- a/arch/arm/mach-imx/pm-imx7ulp.c
+++ b/arch/arm/mach-imx/pm-imx7ulp.c
@@ -9,21 +9,60 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 
+#include "common.h"
+
 #define SMC_PMCTRL		0x10
 #define BP_PMCTRL_PSTOPO        16
 #define PSTOPO_PSTOP3		0x3
+#define PSTOPO_PSTOP2		0x2
+#define PSTOPO_PSTOP1		0x1
+#define BP_PMCTRL_RUNM		8
+#define RUNM_RUN		0
+#define BP_PMCTRL_STOPM		0
+#define STOPM_STOP		0
+
+#define BM_PMCTRL_PSTOPO	(3 << BP_PMCTRL_PSTOPO)
+#define BM_PMCTRL_RUNM		(3 << BP_PMCTRL_RUNM)
+#define BM_PMCTRL_STOPM		(7 << BP_PMCTRL_STOPM)
+
+static void __iomem *smc1_base;
+
+int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode)
+{
+	u32 val = readl_relaxed(smc1_base + SMC_PMCTRL);
+
+	/* clear all */
+	val &= ~(BM_PMCTRL_RUNM | BM_PMCTRL_STOPM | BM_PMCTRL_PSTOPO);
+
+	switch (mode) {
+	case ULP_PM_RUN:
+		/* system/bus clock enabled */
+		val |= PSTOPO_PSTOP3 << BP_PMCTRL_PSTOPO;
+		break;
+	case ULP_PM_WAIT:
+		/* system clock disabled, bus clock enabled */
+		val |= PSTOPO_PSTOP2 << BP_PMCTRL_PSTOPO;
+		break;
+	case ULP_PM_STOP:
+		/* system/bus clock disabled */
+		val |= PSTOPO_PSTOP1 << BP_PMCTRL_PSTOPO;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	writel_relaxed(val, smc1_base + SMC_PMCTRL);
+
+	return 0;
+}
 
 void __init imx7ulp_pm_init(void)
 {
 	struct device_node *np;
-	void __iomem *smc1_base;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1");
 	smc1_base = of_iomap(np, 0);
 	WARN_ON(!smc1_base);
 
-	/* Partial Stop mode 3 with system/bus clock enabled */
-	writel_relaxed(PSTOPO_PSTOP3 << BP_PMCTRL_PSTOPO,
-		       smc1_base + SMC_PMCTRL);
-	iounmap(smc1_base);
+	imx7ulp_set_lpm(ULP_PM_RUN);
 }
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index e48cc06c2aec..b3be60a8e467 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -45,73 +45,6 @@
 #include <mach/board.h>
 #include "common.h"
 
-/*
- * AMBA LCD controller
- */
-static struct clcd_panel conn_lcd_panel = {
-	.mode		= {
-		.name		= "QVGA portrait",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 191828,
-		.left_margin	= 22,
-		.right_margin	= 11,
-		.upper_margin	= 2,
-		.lower_margin	= 1,
-		.hsync_len	= 5,
-		.vsync_len	= 2,
-		.sync		= 0,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-	.width		= -1,
-	.height		= -1,
-	.tim2		= (TIM2_IVS | TIM2_IHS),
-	.cntl		= (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
-				CNTL_LCDBPP16_565),
-	.bpp		= 16,
-};
-#define PANEL_SIZE (3 * SZ_64K)
-
-static int lpc32xx_clcd_setup(struct clcd_fb *fb)
-{
-	dma_addr_t dma;
-
-	fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, PANEL_SIZE, &dma,
-					  GFP_KERNEL);
-	if (!fb->fb.screen_base) {
-		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
-		return -ENOMEM;
-	}
-
-	fb->fb.fix.smem_start = dma;
-	fb->fb.fix.smem_len = PANEL_SIZE;
-	fb->panel = &conn_lcd_panel;
-
-	return 0;
-}
-
-static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
-{
-	return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
-			   fb->fb.fix.smem_start, fb->fb.fix.smem_len);
-}
-
-static void lpc32xx_clcd_remove(struct clcd_fb *fb)
-{
-	dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
-		    fb->fb.fix.smem_start);
-}
-
-static struct clcd_board lpc32xx_clcd_data = {
-	.name		= "Phytec LCD",
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.setup		= lpc32xx_clcd_setup,
-	.mmap		= lpc32xx_clcd_mmap,
-	.remove		= lpc32xx_clcd_remove,
-};
-
 static struct pl08x_channel_data pl08x_slave_channels[] = {
 	{
 		.bus_id = "nand-slc",
@@ -148,11 +81,6 @@ static struct pl08x_platform_data pl08x_pd = {
 	.mem_buses = PL08X_AHB1,
 };
 
-static struct mmci_platform_data lpc32xx_mmci_data = {
-	.ocr_mask	= MMC_VDD_30_31 | MMC_VDD_31_32 |
-			  MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
 static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
 	.dma_filter = pl08x_filter_id,
 };
@@ -164,10 +92,7 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
 static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL),
 	OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL),
-	OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
 	OF_DEV_AUXDATA("arm,pl080", 0x31000000, "pl08xdmac", &pl08x_pd),
-	OF_DEV_AUXDATA("arm,pl18x", 0x20098000, "20098000.sd",
-		       &lpc32xx_mmci_data),
 	OF_DEV_AUXDATA("nxp,lpc3220-slc", 0x20020000, "20020000.flash",
 		       &lpc32xx_slc_data),
 	OF_DEV_AUXDATA("nxp,lpc3220-mlc", 0x200a8000, "200a8000.flash",
@@ -177,15 +102,6 @@ static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
 
 static void __init lpc3250_machine_init(void)
 {
-	u32 tmp;
-
-	/* Setup LCD muxing to RGB565 */
-	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
-		~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
-		LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK);
-	tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
-	__raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
 	lpc32xx_serial_init();
 
 	/* Test clock needed for UDA1380 initial init */
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
index 62471570d586..32bca351a73b 100644
--- a/arch/arm/mach-lpc32xx/pm.c
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -86,17 +86,10 @@ static int lpc32xx_pm_enter(suspend_state_t state)
 	void *iram_swap_area;
 
 	/* Allocate some space for temporary IRAM storage */
-	iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL);
-	if (!iram_swap_area) {
-		printk(KERN_ERR
-		       "PM Suspend: cannot allocate memory to save portion "
-			"of SRAM\n");
+	iram_swap_area = kmemdup((void *)TEMP_IRAM_AREA,
+				 lpc32xx_sys_suspend_sz, GFP_KERNEL);
+	if (!iram_swap_area)
 		return -ENOMEM;
-	}
-
-	/* Backup a small area of IRAM used for the suspend code */
-	memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA,
-		lpc32xx_sys_suspend_sz);
 
 	/*
 	 * Copy code to suspend system into IRAM. The suspend code
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index 91cc461f7b04..11ed264f0731 100644
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -26,6 +26,10 @@ config MACH_MT7623
 	bool "MediaTek MT7623 SoCs support"
 	default ARCH_MEDIATEK
 
+config MACH_MT7629
+	bool "MediaTek MT7629 SoCs support"
+	default ARCH_MEDIATEK
+
 config MACH_MT8127
 	bool "MediaTek MT8127 SoCs support"
 	default ARCH_MEDIATEK
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index 6910b4e0d913..b6a81ba1ce32 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -30,7 +30,6 @@ static void __init mediatek_timer_init(void)
 
 	if (of_machine_is_compatible("mediatek,mt6589") ||
 	    of_machine_is_compatible("mediatek,mt7623") ||
-	    of_machine_is_compatible("mediatek,mt7623a") ||
 	    of_machine_is_compatible("mediatek,mt8135") ||
 	    of_machine_is_compatible("mediatek,mt8127")) {
 		/* turn on GPT6 which ungates arch timer clocks */
@@ -50,7 +49,7 @@ static const char * const mediatek_board_dt_compat[] = {
 	"mediatek,mt6589",
 	"mediatek,mt6592",
 	"mediatek,mt7623",
-	"mediatek,mt7623a",
+	"mediatek,mt7629",
 	"mediatek,mt8127",
 	"mediatek,mt8135",
 	NULL,
diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
index 6882ff07aaa6..c9d7c0458452 100644
--- a/arch/arm/mach-mediatek/platsmp.c
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -60,7 +60,7 @@ static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
 static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
 	{ .compatible   = "mediatek,mt6589", .data = &mtk_mt6589_boot },
 	{ .compatible   = "mediatek,mt7623", .data = &mtk_mt7623_boot },
-	{ .compatible   = "mediatek,mt7623a", .data = &mtk_mt7623_boot },
+	{ .compatible   = "mediatek,mt7629", .data = &mtk_mt7623_boot },
 	{},
 };
 
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index b16831697183..15e9cb75738e 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -9,7 +9,6 @@ menuconfig ARCH_MESON
 	select PINCTRL
 	select PINCTRL_MESON
 	select COMMON_CLK
-	select COMMON_CLK_AMLOGIC
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index dc8e4f4b7ade..8839c72fdee3 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -454,24 +454,6 @@ config MACH_TREO680
 	  Say Y here if you intend to run this kernel on Palm Treo 680
 	  smartphone.
 
-config MACH_RAUMFELD_RC
-	bool "Raumfeld Controller"
-	select CPU_PXA300
-	select POWER_SUPPLY
-	select PXA3xx
-
-config MACH_RAUMFELD_CONNECTOR
-	bool "Raumfeld Connector"
-	select CPU_PXA300
-	select POWER_SUPPLY
-	select PXA3xx
-
-config MACH_RAUMFELD_SPEAKER
-	bool "Raumfeld Speaker"
-	select CPU_PXA300
-	select POWER_SUPPLY
-	select PXA3xx
-
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 	select SHARP_PARAM
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0a8e9611052f..f70728930c4f 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -86,9 +86,6 @@ obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
-obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
-obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
-obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
 obj-$(CONFIG_PXA_SYSTEMS_CPLDS)	+= pxa_cplds_irqs.o
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
+++ /dev/null
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
deleted file mode 100644
index e13bfc9b01d2..000000000000
--- a/arch/arm/mach-pxa/raumfeld.c
+++ /dev/null
@@ -1,1186 +0,0 @@
-/*
- * arch/arm/mach-pxa/raumfeld.c
- *
- * Support for the following Raumfeld devices:
- *
- * 	* Controller
- *  	* Connector
- *  	* Speaker S/M
- *
- * See http://www.raumfeld.com for details.
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/property.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <linux/w1-gpio.h>
-#include <linux/sched.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/lis3lv02d.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
-#include <linux/regulator/max8660.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/consumer.h>
-#include <linux/delay.h>
-
-#include <asm/system_info.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa300.h"
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/* common GPIO	definitions */
-
-/* inputs */
-#define GPIO_ON_OFF		(14)
-#define GPIO_VOLENC_A		(19)
-#define GPIO_VOLENC_B		(20)
-#define GPIO_CHARGE_DONE	(23)
-#define GPIO_CHARGE_IND		(27)
-#define GPIO_TOUCH_IRQ		(32)
-#define GPIO_ETH_IRQ		(40)
-#define GPIO_SPI_MISO		(98)
-#define GPIO_ACCEL_IRQ		(104)
-#define GPIO_RESCUE_BOOT	(115)
-#define GPIO_DOCK_DETECT	(116)
-#define GPIO_KEY1		(117)
-#define GPIO_KEY2		(118)
-#define GPIO_KEY3		(119)
-#define GPIO_CHARGE_USB_OK	(112)
-#define GPIO_CHARGE_DC_OK	(101)
-#define GPIO_CHARGE_USB_SUSP	(102)
-
-/* outputs */
-#define GPIO_SHUTDOWN_SUPPLY	(16)
-#define GPIO_SHUTDOWN_BATT	(18)
-#define GPIO_CHRG_PEN2		(31)
-#define GPIO_TFT_VA_EN		(33)
-#define GPIO_SPDIF_CS		(34)
-#define GPIO_LED2		(35)
-#define GPIO_LED1		(36)
-#define GPIO_SPDIF_RESET	(38)
-#define GPIO_SPI_CLK		(95)
-#define GPIO_MCLK_DAC_CS	(96)
-#define GPIO_SPI_MOSI		(97)
-#define GPIO_W1_PULLUP_ENABLE	(105)
-#define GPIO_DISPLAY_ENABLE	(106)
-#define GPIO_MCLK_RESET		(111)
-#define GPIO_W2W_RESET		(113)
-#define GPIO_W2W_PDN		(114)
-#define GPIO_CODEC_RESET	(120)
-#define GPIO_AUDIO_VA_ENABLE	(124)
-#define GPIO_ACCEL_CS		(125)
-#define GPIO_ONE_WIRE		(126)
-
-/*
- * GPIO configurations
- */
-static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO77_UART1_RXD,
-	GPIO78_UART1_TXD,
-	GPIO79_UART1_CTS,
-	GPIO81_UART1_DSR,
-	GPIO83_UART1_DTR,
-	GPIO84_UART1_RTS,
-
-	/* UART3 */
-	GPIO110_UART3_RXD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* I2C */
-	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* SPI */
-	GPIO34_GPIO,	/* SPDIF_CS */
-	GPIO96_GPIO,	/* MCLK_CS */
-	GPIO125_GPIO,	/* ACCEL_CS */
-
-	/* MMC */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-
-	/* One-wire */
-	GPIO126_GPIO | MFP_LPM_FLOAT,
-	GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW,
-
-	/* CHRG_USB_OK */
-	GPIO101_GPIO | MFP_PULL_HIGH,
-	/* CHRG_USB_OK */
-	GPIO112_GPIO | MFP_PULL_HIGH,
-	/* CHRG_USB_SUSP */
-	GPIO102_GPIO,
-	/* DISPLAY_ENABLE */
-	GPIO106_GPIO,
-	/* DOCK_DETECT */
-	GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-};
-
-static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO77_UART1_RXD,
-	GPIO78_UART1_TXD,
-	GPIO79_UART1_CTS,
-	GPIO81_UART1_DSR,
-	GPIO83_UART1_DTR,
-	GPIO84_UART1_RTS,
-
-	/* UART3 */
-	GPIO110_UART3_RXD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* I2C */
-	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* SPI */
-	GPIO34_GPIO,	/* SPDIF_CS */
-	GPIO96_GPIO,	/* MCLK_CS */
-	GPIO125_GPIO,	/* ACCEL_CS */
-
-	/* MMC */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-
-	/* Ethernet */
-	GPIO1_nCS2,			/* CS */
-	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
-
-	/* SSP for I2S */
-	GPIO85_SSP1_SCLK,
-	GPIO89_SSP1_EXTCLK,
-	GPIO86_SSP1_FRM,
-	GPIO87_SSP1_TXD,
-	GPIO88_SSP1_RXD,
-	GPIO90_SSP1_SYSCLK,
-
-	/* SSP2 for S/PDIF */
-	GPIO25_SSP2_SCLK,
-	GPIO26_SSP2_FRM,
-	GPIO27_SSP2_TXD,
-	GPIO29_SSP2_EXTCLK,
-
-	/* LEDs */
-	GPIO35_GPIO | MFP_LPM_PULL_LOW,
-	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO77_UART1_RXD,
-	GPIO78_UART1_TXD,
-	GPIO79_UART1_CTS,
-	GPIO81_UART1_DSR,
-	GPIO83_UART1_DTR,
-	GPIO84_UART1_RTS,
-
-	/* UART3 */
-	GPIO110_UART3_RXD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* I2C */
-	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* SPI */
-	GPIO34_GPIO,	/* SPDIF_CS */
-	GPIO96_GPIO,	/* MCLK_CS */
-	GPIO125_GPIO,	/* ACCEL_CS */
-
-	/* MMC */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-
-	/* Ethernet */
-	GPIO1_nCS2,			/* CS */
-	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
-
-	/* SSP for I2S */
-	GPIO85_SSP1_SCLK,
-	GPIO89_SSP1_EXTCLK,
-	GPIO86_SSP1_FRM,
-	GPIO87_SSP1_TXD,
-	GPIO88_SSP1_RXD,
-	GPIO90_SSP1_SYSCLK,
-
-	/* LEDs */
-	GPIO35_GPIO | MFP_LPM_PULL_LOW,
-	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-/*
- * SMSC LAN9220 Ethernet
- */
-
-static struct resource smc91x_resources[] = {
-	{
-		.start	= PXA3xx_CS2_PHYS,
-		.end	= PXA3xx_CS2_PHYS + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct smsc911x_platform_config raumfeld_smsc911x_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &raumfeld_smsc911x_config,
-	}
-};
-
-/**
- * NAND
- */
-
-static struct mtd_partition raumfeld_nand_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0,
-		.size		= 0xa0000,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name		= "BootloaderEnvironment",
-		.offset		= 0xa0000,
-		.size		= 0x20000,
-	},
-	{
-		.name		= "BootloaderSplashScreen",
-		.offset		= 0xc0000,
-		.size		= 0x60000,
-	},
-	{
-		.name		= "UBI",
-		.offset		= 0x120000,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
-	.keep_config	= 1,
-	.parts		= raumfeld_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(raumfeld_nand_partitions),
-};
-
-/**
- * USB (OHCI) support
- */
-
-static struct pxaohci_platform_data raumfeld_ohci_info = {
-	.port_mode      = PMM_GLOBAL_MODE,
-	.flags		= ENABLE_PORT1,
-};
-
-/**
- * Rotary encoder input device
- */
-
-static struct gpiod_lookup_table raumfeld_rotary_gpios_table = {
-	.dev_id = "rotary-encoder.0",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-0",
-				GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-0",
-				GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static const struct property_entry raumfeld_rotary_properties[] __initconst = {
-	PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
-	PROPERTY_ENTRY_U32("linux,axis",		      REL_X),
-	PROPERTY_ENTRY_U32("rotary-encoder,relative_axis",    1),
-	{ },
-};
-
-static struct platform_device rotary_encoder_device = {
-	.name		= "rotary-encoder",
-	.id		= 0,
-};
-
-/**
- * GPIO buttons
- */
-
-static struct gpio_keys_button gpio_keys_button[] = {
-	{
-		.code			= KEY_F1,
-		.type			= EV_KEY,
-		.gpio			= GPIO_KEY1,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "Button 1",
-	},
-	{
-		.code			= KEY_F2,
-		.type			= EV_KEY,
-		.gpio			= GPIO_KEY2,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "Button 2",
-	},
-	{
-		.code			= KEY_F3,
-		.type			= EV_KEY,
-		.gpio			= GPIO_KEY3,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "Button 3",
-	},
-	{
-		.code			= KEY_F4,
-		.type			= EV_KEY,
-		.gpio			= GPIO_RESCUE_BOOT,
-		.active_low		= 0,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "rescue boot button",
-	},
-	{
-		.code			= KEY_F5,
-		.type			= EV_KEY,
-		.gpio			= GPIO_DOCK_DETECT,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "dock detect",
-	},
-	{
-		.code			= KEY_F6,
-		.type			= EV_KEY,
-		.gpio			= GPIO_ON_OFF,
-		.active_low		= 0,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "on_off button",
-	},
-};
-
-static struct gpio_keys_platform_data gpio_keys_platform_data = {
-	.buttons	= gpio_keys_button,
-	.nbuttons	= ARRAY_SIZE(gpio_keys_button),
-	.rep		= 0,
-};
-
-static struct platform_device raumfeld_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev 	= {
-		.platform_data	= &gpio_keys_platform_data,
-	}
-};
-
-/**
- * GPIO LEDs
- */
-
-static struct gpio_led raumfeld_leds[] = {
-	{
-		.name		= "raumfeld:1",
-		.gpio		= GPIO_LED1,
-		.active_low	= 1,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name		= "raumfeld:2",
-		.gpio		= GPIO_LED2,
-		.active_low	= 0,
-		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
-	}
-};
-
-static struct gpio_led_platform_data raumfeld_led_platform_data = {
-	.leds		= raumfeld_leds,
-	.num_leds	= ARRAY_SIZE(raumfeld_leds),
-};
-
-static struct platform_device raumfeld_led_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &raumfeld_led_platform_data,
-	},
-};
-
-/**
- * One-wire (W1 bus) support
- */
-
-static void w1_enable_external_pullup(int enable)
-{
-	gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable);
-	msleep(100);
-}
-
-static struct gpiod_lookup_table raumfeld_w1_gpiod_table = {
-	.dev_id = "w1-gpio",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", GPIO_ONE_WIRE, NULL, 0,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct w1_gpio_platform_data w1_gpio_platform_data = {
-	.enable_external_pullup = w1_enable_external_pullup,
-};
-
-static struct platform_device raumfeld_w1_gpio_device = {
-	.name	= "w1-gpio",
-	.dev	= {
-		.platform_data = &w1_gpio_platform_data
-	}
-};
-
-static void __init raumfeld_w1_init(void)
-{
-	int ret = gpio_request(GPIO_W1_PULLUP_ENABLE,
-			        "W1 external pullup enable");
-
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n");
-	else
-		gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
-
-	gpiod_add_lookup_table(&raumfeld_w1_gpiod_table);
-	platform_device_register(&raumfeld_w1_gpio_device);
-}
-
-/**
- * Framebuffer device
- */
-
-static struct pwm_lookup raumfeld_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000,
-		   PWM_POLARITY_NORMAL),
-};
-
-/* PWM controlled backlight */
-static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-	.enable_gpio	= -1,
-};
-
-static struct platform_device raumfeld_pwm_backlight_device = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &raumfeld_pwm_backlight_data,
-	}
-};
-
-/* LT3593 controlled backlight */
-static struct gpio_led raumfeld_lt3593_led = {
-	.name		= "backlight",
-	.gpio		= mfp_to_gpio(MFP_PIN_GPIO17),
-	.default_state	= LEDS_GPIO_DEFSTATE_ON,
-};
-
-static struct gpio_led_platform_data raumfeld_lt3593_platform_data = {
-	.leds		= &raumfeld_lt3593_led,
-	.num_leds	= 1,
-};
-
-static struct platform_device raumfeld_lt3593_device = {
-	.name	= "leds-lt3593",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &raumfeld_lt3593_platform_data,
-	},
-};
-
-static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
-	.pixclock	= 111000,
-	.xres		= 480,
-	.yres		= 272,
-	.bpp		= 16,
-	.hsync_len	= 41,
-	.left_margin	= 2,
-	.right_margin	= 1,
-	.vsync_len	= 10,
-	.upper_margin	= 3,
-	.lower_margin	= 1,
-	.sync		= 0,
-};
-
-static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
-	.modes		= &sharp_lq043t3dx02_mode,
-	.num_modes	= 1,
-	.video_mem_size = 0x400000,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-#ifdef CONFIG_PXA3XX_GCU
-	.acceleration_enabled = 1,
-#endif
-};
-
-static void __init raumfeld_lcd_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_TFT_VA_EN\n");
-	else
-		gpio_direction_output(GPIO_TFT_VA_EN, 1);
-
-	msleep(100);
-
-	ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n");
-	else
-		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
-
-	/* Hardware revision 2 has the backlight regulator controlled
-	 * by an LT3593, earlier and later devices use PWM for that. */
-	if ((system_rev & 0xff) == 2) {
-		platform_device_register(&raumfeld_lt3593_device);
-	} else {
-		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
-		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
-		pwm_add_table(raumfeld_pwm_lookup,
-			      ARRAY_SIZE(raumfeld_pwm_lookup));
-		platform_device_register(&raumfeld_pwm_backlight_device);
-	}
-
-	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
-	platform_device_register(&pxa3xx_device_gcu);
-}
-
-/**
- * SPI devices
- */
-
-static struct spi_gpio_platform_data raumfeld_spi_platform_data = {
-	.num_chipselect	= 3,
-};
-
-static struct platform_device raumfeld_spi_device = {
-	.name	= "spi_gpio",
-	.id	= 0,
-	.dev 	= {
-		.platform_data	= &raumfeld_spi_platform_data,
-	}
-};
-
-static struct gpiod_lookup_table raumfeld_spi_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("gpio-0", GPIO_SPI_CLK,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-0", GPIO_SPI_MOSI,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-0", GPIO_SPI_MISO,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("gpio-0", GPIO_SPDIF_CS,
-				"cs", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("gpio-0", GPIO_ACCEL_CS,
-				"cs", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("gpio-0", GPIO_MCLK_DAC_CS,
-				"cs", 2, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct lis3lv02d_platform_data lis3_pdata = {
-	.click_flags 	= LIS3_CLICK_SINGLE_X |
-			  LIS3_CLICK_SINGLE_Y |
-			  LIS3_CLICK_SINGLE_Z,
-	.irq_cfg	= LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK,
-	.wakeup_flags	= LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI |
-			  LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI |
-			  LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI,
-	.wakeup_thresh	= 10,
-	.click_thresh_x = 10,
-	.click_thresh_y = 10,
-	.click_thresh_z = 10,
-};
-
-#define SPI_AK4104	\
-{			\
-	.modalias	= "ak4104-codec",	\
-	.max_speed_hz	= 10000,		\
-	.bus_num	= 0,			\
-	.chip_select	= 0,			\
-}
-
-#define SPI_LIS3	\
-{			\
-	.modalias	= "lis3lv02d_spi",	\
-	.max_speed_hz	= 1000000,		\
-	.bus_num	= 0,			\
-	.chip_select	= 1,			\
-	.platform_data	= &lis3_pdata,		\
-	.irq		= PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ),	\
-}
-
-#define SPI_DAC7512	\
-{	\
-	.modalias	= "dac7512",		\
-	.max_speed_hz	= 1000000,		\
-	.bus_num	= 0,			\
-	.chip_select	= 2,			\
-}
-
-static struct spi_board_info connector_spi_devices[] __initdata = {
-	SPI_AK4104,
-	SPI_DAC7512,
-};
-
-static struct spi_board_info speaker_spi_devices[] __initdata = {
-	SPI_DAC7512,
-};
-
-static struct spi_board_info controller_spi_devices[] __initdata = {
-	SPI_LIS3,
-};
-
-/**
- * MMC for Marvell Libertas 8688 via SDIO
- */
-
-static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data)
-{
-	gpio_set_value(GPIO_W2W_RESET, 1);
-	gpio_set_value(GPIO_W2W_PDN, 1);
-
-	return 0;
-}
-
-static void raumfeld_mci_exit(struct device *dev, void *data)
-{
-	gpio_set_value(GPIO_W2W_RESET, 0);
-	gpio_set_value(GPIO_W2W_PDN, 0);
-}
-
-static struct pxamci_platform_data raumfeld_mci_platform_data = {
-	.init			= raumfeld_mci_init,
-	.exit			= raumfeld_mci_exit,
-	.detect_delay_ms	= 200,
-};
-
-/*
- * External power / charge logic
- */
-
-static int power_supply_init(struct device *dev)
-{
-	return 0;
-}
-
-static void power_supply_exit(struct device *dev)
-{
-}
-
-static int raumfeld_is_ac_online(void)
-{
-	return !gpio_get_value(GPIO_CHARGE_DC_OK);
-}
-
-static int raumfeld_is_usb_online(void)
-{
-	return 0;
-}
-
-static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
-
-static void raumfeld_power_signal_charged(void)
-{
-	struct power_supply *psy =
-		power_supply_get_by_name(raumfeld_power_supplicants[0]);
-
-	if (psy) {
-		power_supply_set_battery_charged(psy);
-		power_supply_put(psy);
-	}
-}
-
-static int raumfeld_power_resume(void)
-{
-	/* check if GPIO_CHARGE_DONE went low while we were sleeping */
-	if (!gpio_get_value(GPIO_CHARGE_DONE))
-		raumfeld_power_signal_charged();
-
-	return 0;
-}
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= power_supply_init,
-	.is_ac_online		= raumfeld_is_ac_online,
-	.is_usb_online		= raumfeld_is_usb_online,
-	.exit			= power_supply_exit,
-	.supplied_to		= raumfeld_power_supplicants,
-	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants),
-	.resume			= raumfeld_power_resume,
-};
-
-static struct resource power_supply_resources[] = {
-	{
-		.name  = "ac",
-		.flags = IORESOURCE_IRQ |
-			 IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
-		.start = GPIO_CHARGE_DC_OK,
-		.end   = GPIO_CHARGE_DC_OK,
-	},
-};
-
-static irqreturn_t charge_done_irq(int irq, void *dev_id)
-{
-	raumfeld_power_signal_charged();
-	return IRQ_HANDLED;
-}
-
-static struct platform_device raumfeld_power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-static void __init raumfeld_power_init(void)
-{
-	int ret;
-
-	/* Set PEN2 high to enable maximum charge current */
-	ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_CHRG_PEN2\n");
-	else
-		gpio_direction_output(GPIO_CHRG_PEN2, 1);
-
-	ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_CHARGE_DC_OK\n");
-
-	ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n");
-	else
-		gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
-
-	power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
-	power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
-
-	ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
-			&charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
-			"charge_done", NULL);
-
-	if (ret < 0)
-		printk(KERN_ERR "%s: unable to register irq %d\n", __func__,
-			GPIO_CHARGE_DONE);
-	else
-		platform_device_register(&raumfeld_power_supply);
-}
-
-/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */
-
-static struct regulator_consumer_supply audio_va_consumer_supply =
-	REGULATOR_SUPPLY("va", "0-0048");
-
-static struct regulator_init_data audio_va_initdata = {
-	.consumer_supplies = &audio_va_consumer_supply,
-	.num_consumer_supplies = 1,
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config audio_va_config = {
-	.supply_name		= "audio_va",
-	.microvolts		= 5000000,
-	.enabled_at_boot	= 0,
-	.init_data		= &audio_va_initdata,
-};
-
-static struct platform_device audio_va_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &audio_va_config,
-	},
-};
-
-static struct gpiod_lookup_table audio_va_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_AUDIO_VA_ENABLE,
-			    NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* Dummy supplies for Codec's VD/VLC */
-
-static struct regulator_consumer_supply audio_dummy_supplies[] = {
-	REGULATOR_SUPPLY("vd", "0-0048"),
-	REGULATOR_SUPPLY("vlc", "0-0048"),
-};
-
-static struct regulator_init_data audio_dummy_initdata = {
-	.consumer_supplies = audio_dummy_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config audio_dummy_config = {
-	.supply_name		= "audio_vd",
-	.microvolts		= 3300000,
-	.init_data		= &audio_dummy_initdata,
-};
-
-static struct platform_device audio_supply_dummy_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &audio_dummy_config,
-	},
-};
-
-static struct platform_device *audio_regulator_devices[] = {
-	&audio_va_device,
-	&audio_supply_dummy_device,
-};
-
-/**
- * Regulator support via MAX8660
- */
-
-static struct regulator_consumer_supply vcc_mmc_supply =
-	REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0");
-
-static struct regulator_init_data vcc_mmc_init_data = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_MODE,
-	},
-	.consumer_supplies = &vcc_mmc_supply,
-	.num_consumer_supplies = 1,
-};
-
-static struct max8660_subdev_data max8660_v6_subdev_data = {
-	.id		= MAX8660_V6,
-	.name		= "vmmc",
-	.platform_data	= &vcc_mmc_init_data,
-};
-
-static struct max8660_platform_data max8660_pdata = {
-	.subdevs = &max8660_v6_subdev_data,
-	.num_subdevs = 1,
-};
-
-/**
- * I2C devices
- */
-
-static struct i2c_board_info raumfeld_pwri2c_board_info = {
-	.type		= "max8660",
-	.addr		= 0x34,
-	.platform_data	= &max8660_pdata,
-};
-
-static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
-	.type	= "cs4270",
-	.addr	= 0x48,
-};
-
-static struct gpiod_lookup_table raumfeld_controller_gpios_table = {
-	.dev_id = "0-000a",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa",
-			    GPIO_TOUCH_IRQ, "attn", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static const struct resource raumfeld_controller_resources[] __initconst = {
-	{
-		.start	= PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
-	},
-};
-
-static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
-	.type	= "eeti_ts",
-	.addr	= 0x0a,
-	.resources = raumfeld_controller_resources,
-	.num_resources = ARRAY_SIZE(raumfeld_controller_resources),
-};
-
-static struct platform_device *raumfeld_common_devices[] = {
-	&raumfeld_gpio_keys_device,
-	&raumfeld_led_device,
-	&raumfeld_spi_device,
-};
-
-static void __init raumfeld_audio_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
-	if (ret < 0)
-		pr_warn("unable to request GPIO_CODEC_RESET\n");
-	else
-		gpio_direction_output(GPIO_CODEC_RESET, 1);
-
-	ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
-	if (ret < 0)
-		pr_warn("unable to request GPIO_SPDIF_RESET\n");
-	else
-		gpio_direction_output(GPIO_SPDIF_RESET, 1);
-
-	ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
-	if (ret < 0)
-		pr_warn("unable to request GPIO_MCLK_RESET\n");
-	else
-		gpio_direction_output(GPIO_MCLK_RESET, 1);
-
-	gpiod_add_lookup_table(&audio_va_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
-}
-
-static void __init raumfeld_common_init(void)
-{
-	int ret;
-
-	/* The on/off button polarity has changed after revision 1 */
-	if ((system_rev & 0xff) > 1) {
-		int i;
-
-		for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
-			if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
-				gpio_keys_button[i].active_low = 1;
-	}
-
-	enable_irq_wake(IRQ_WAKEUP0);
-
-	pxa3xx_set_nand_info(&raumfeld_nand_info);
-	pxa3xx_set_i2c_power_info(NULL);
-	pxa_set_ohci_info(&raumfeld_ohci_info);
-	pxa_set_mci_info(&raumfeld_mci_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ffuart_info(NULL);
-
-	ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_W2W_RESET\n");
-	else
-		gpio_direction_output(GPIO_W2W_RESET, 0);
-
-	ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_W2W_PDN\n");
-	else
-		gpio_direction_output(GPIO_W2W_PDN, 0);
-
-	/* this can be used to switch off the device */
-	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
-	else
-		gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
-
-	gpiod_add_lookup_table(&raumfeld_spi_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices));
-	i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
-}
-
-static void __init __maybe_unused raumfeld_controller_init(void)
-{
-	int ret;
-
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
-
-	gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
-	device_add_properties(&rotary_encoder_device.dev,
-			      raumfeld_rotary_properties);
-	platform_device_register(&rotary_encoder_device);
-
-	spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
-
-	gpiod_add_lookup_table(&raumfeld_controller_gpios_table);
-	i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
-
-	ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n");
-	else
-		gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
-
-	raumfeld_common_init();
-	raumfeld_power_init();
-	raumfeld_lcd_init();
-	raumfeld_w1_init();
-}
-
-static void __init __maybe_unused raumfeld_connector_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
-	spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
-	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
-
-	platform_device_register(&smc91x_device);
-
-	raumfeld_audio_init();
-	raumfeld_common_init();
-}
-
-static void __init __maybe_unused raumfeld_speaker_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
-	spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
-	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
-
-	platform_device_register(&smc91x_device);
-
-	gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
-	device_add_properties(&rotary_encoder_device.dev,
-			      raumfeld_rotary_properties);
-	platform_device_register(&rotary_encoder_device);
-
-	raumfeld_audio_init();
-	raumfeld_common_init();
-}
-
-/* physical memory regions */
-#define	RAUMFELD_SDRAM_BASE	0xa0000000	/* SDRAM region */
-
-#ifdef CONFIG_MACH_RAUMFELD_RC
-MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
-	.atag_offset	= 0x100,
-	.init_machine	= raumfeld_controller_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
-MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
-	.atag_offset	= 0x100,
-	.init_machine	= raumfeld_connector_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
-MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
-	.atag_offset	= 0x100,
-	.init_machine	= raumfeld_speaker_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
index 058ce73137e8..5d819b6ea428 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
@@ -65,16 +65,16 @@ static int osiris_dvs_notify(struct notifier_block *nb,
 
 	switch (val) {
 	case CPUFREQ_PRECHANGE:
-		if (old_dvs & !new_dvs ||
-		    cur_dvs & !new_dvs) {
+		if ((old_dvs && !new_dvs) ||
+		    (cur_dvs && !new_dvs)) {
 			pr_debug("%s: exiting dvs\n", __func__);
 			cur_dvs = false;
 			gpio_set_value(OSIRIS_GPIO_DVS, 1);
 		}
 		break;
 	case CPUFREQ_POSTCHANGE:
-		if (!old_dvs & new_dvs ||
-		    !cur_dvs & new_dvs) {
+		if ((!old_dvs && new_dvs) ||
+		    (!cur_dvs && new_dvs)) {
 			pr_debug("entering dvs\n");
 			cur_dvs = true;
 			gpio_set_value(OSIRIS_GPIO_DVS, 0);
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 8e50daa99151..dc526ef2e9b3 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -40,6 +40,7 @@
 struct regulator_quirk {
 	struct list_head		list;
 	const struct of_device_id	*id;
+	struct device_node		*np;
 	struct of_phandle_args		irq_args;
 	struct i2c_msg			i2c_msg;
 	bool				shared;	/* IRQ line is shared */
@@ -101,6 +102,9 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 		if (!pos->shared)
 			continue;
 
+		if (pos->np->parent != client->dev.parent->of_node)
+			continue;
+
 		dev_info(&client->dev, "clearing %s@0x%02x interrupts\n",
 			 pos->id->compatible, pos->i2c_msg.addr);
 
@@ -165,6 +169,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 		memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg));
 
 		quirk->id = id;
+		quirk->np = np;
 		quirk->i2c_msg.addr = addr;
 
 		ret = of_irq_parse_one(np, 0, argsa);
diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h
index 9e5b2f869fc8..9bc291e76887 100644
--- a/arch/arm/mach-tegra/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -79,15 +79,24 @@
 #define TEGRA_PMC_BASE			0x7000E400
 #define TEGRA_PMC_SIZE			SZ_256
 
+#define TEGRA_MC_BASE			0x7000F000
+#define TEGRA_MC_SIZE			SZ_1K
+
 #define TEGRA_EMC_BASE			0x7000F400
 #define TEGRA_EMC_SIZE			SZ_1K
 
+#define TEGRA114_MC_BASE		0x70019000
+#define TEGRA114_MC_SIZE		SZ_4K
+
 #define TEGRA_EMC0_BASE			0x7001A000
 #define TEGRA_EMC0_SIZE			SZ_2K
 
 #define TEGRA_EMC1_BASE			0x7001A800
 #define TEGRA_EMC1_SIZE			SZ_2K
 
+#define TEGRA124_MC_BASE		0x70019000
+#define TEGRA124_MC_SIZE		SZ_4K
+
 #define TEGRA124_EMC_BASE		0x7001B000
 #define TEGRA124_EMC_SIZE		SZ_2K
 
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index 5c8e638ee51a..dedeebfccc55 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -32,7 +32,6 @@
 
 #define EMC_CFG				0xc
 #define EMC_ADR_CFG			0x10
-#define EMC_REFRESH			0x70
 #define EMC_NOP				0xdc
 #define EMC_SELF_REF			0xe0
 #define EMC_REQ_CTRL			0x2b0
@@ -397,7 +396,6 @@ padload_done:
 	mov	r1, #1
 	str	r1, [r0, #EMC_NOP]
 	str	r1, [r0, #EMC_NOP]
-	str	r1, [r0, #EMC_REFRESH]
 
 	emc_device_mask r1, r0
 
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index dd4a67dabd91..d0b4c486ddbf 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -29,7 +29,6 @@
 #define EMC_CFG				0xc
 #define EMC_ADR_CFG			0x10
 #define EMC_TIMING_CONTROL		0x28
-#define EMC_REFRESH			0x70
 #define EMC_NOP				0xdc
 #define EMC_SELF_REF			0xe0
 #define EMC_MRW				0xe8
@@ -45,6 +44,8 @@
 #define EMC_XM2VTTGENPADCTRL		0x310
 #define EMC_XM2VTTGENPADCTRL2		0x314
 
+#define MC_EMEM_ARB_CFG			0x90
+
 #define PMC_CTRL			0x0
 #define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
 
@@ -419,6 +420,22 @@ _pll_m_c_x_done:
 	movweq	r0, #:lower16:TEGRA124_EMC_BASE
 	movteq	r0, #:upper16:TEGRA124_EMC_BASE
 
+	cmp	r10, #TEGRA30
+	moveq	r2, #0x20
+	movweq	r4, #:lower16:TEGRA_MC_BASE
+	movteq	r4, #:upper16:TEGRA_MC_BASE
+	cmp	r10, #TEGRA114
+	moveq	r2, #0x34
+	movweq	r4, #:lower16:TEGRA114_MC_BASE
+	movteq	r4, #:upper16:TEGRA114_MC_BASE
+	cmp	r10, #TEGRA124
+	moveq	r2, #0x20
+	movweq	r4, #:lower16:TEGRA124_MC_BASE
+	movteq	r4, #:upper16:TEGRA124_MC_BASE
+
+	ldr	r1, [r5, r2]		@ restore MC_EMEM_ARB_CFG
+	str	r1, [r4, #MC_EMEM_ARB_CFG]
+
 exit_self_refresh:
 	ldr	r1, [r5, #0xC]		@ restore EMC_XM2VTTGENPADCTRL
 	str	r1, [r0, #EMC_XM2VTTGENPADCTRL]
@@ -459,7 +476,6 @@ emc_wait_auto_cal_onetime:
 	cmp	r10, #TEGRA30
 	streq	r1, [r0, #EMC_NOP]
 	streq	r1, [r0, #EMC_NOP]
-	streq	r1, [r0, #EMC_REFRESH]
 
 	emc_device_mask r1, r0
 
@@ -521,6 +537,8 @@ zcal_done:
 	ldr	r1, [r5, #0x0]		@ restore EMC_CFG
 	str	r1, [r0, #EMC_CFG]
 
+	emc_timing_update r1, r0
+
 	/* Tegra114 had dual EMC channel, now config the other one */
 	cmp	r10, #TEGRA114
 	bne	__no_dual_emc_chanl
@@ -546,6 +564,7 @@ tegra30_sdram_pad_address:
 	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
 	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
 	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+	.word	TEGRA_MC_BASE + MC_EMEM_ARB_CFG				@0x20
 tegra30_sdram_pad_address_end:
 
 tegra114_sdram_pad_address:
@@ -562,6 +581,7 @@ tegra114_sdram_pad_address:
 	.word	TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL			@0x28
 	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL			@0x2c
 	.word	TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2			@0x30
+	.word	TEGRA114_MC_BASE + MC_EMEM_ARB_CFG			@0x34
 tegra114_sdram_pad_adress_end:
 
 tegra124_sdram_pad_address:
@@ -573,6 +593,7 @@ tegra124_sdram_pad_address:
 	.word	TEGRA_PMC_BASE + PMC_IO_DPD_STATUS			@0x14
 	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT	@0x18
 	.word	TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST		@0x1c
+	.word	TEGRA124_MC_BASE + MC_EMEM_ARB_CFG			@0x20
 tegra124_sdram_pad_address_end:
 
 tegra30_sdram_pad_size: