diff options
| author | Biju Das <biju.das@bp.renesas.com> | 2019-07-05 11:15:20 +0100 |
|---|---|---|
| committer | Geert Uytterhoeven <geert+renesas@glider.be> | 2019-07-29 15:36:00 +0200 |
| commit | 176f936a1e887a53d78f05248dc3c9bbd2c7f4c8 (patch) | |
| tree | cf403487bc747960354e15cdead147db61e195cc /arch/arm64/boot/dts/renesas | |
| parent | d112c20925443b4a8876b101e5b7b13ef105057e (diff) | |
arm64: dts: renesas: hihope-common: Add WLAN support
This patch enables WLAN support for the HiHope RZ/G2[MN] boards.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Diffstat (limited to 'arch/arm64/boot/dts/renesas')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/hihope-common.dtsi | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index fdeb4d2c0e3a..52d61c958325 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -54,6 +54,13 @@ led3 { gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; }; + + wlan_active_led { + label = "yellow:wlan"; + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; }; reg_1p8v: regulator0 { @@ -98,6 +105,17 @@ 1800000 0>; }; + wlan_en_reg: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <70000>; + + gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + x302_clk: x302-clock { compatible = "fixed-clock"; #clock-cells = <0>; @@ -242,6 +260,12 @@ power-source = <1800>; }; + sdhi2_pins: sd2 { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + sdhi3_pins: sd3 { groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; function = "sdhi3"; @@ -301,6 +325,27 @@ status = "okay"; }; +&sdhi2 { + status = "okay"; + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + &sdhi3 { pinctrl-0 = <&sdhi3_pins>; pinctrl-1 = <&sdhi3_pins>; |