Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "Most of the commits are for additional hardware support and minor
  fixes for existing machines for all the usual platforms: qcom,
  amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
  uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
  sunxi, broadcom, omap, and versatile.

  The conversion of binding files to machine-readable yaml format
  continues, along with fixes found during the validation. Andre
  Przywara takes over maintainership for the old Calxeda Highbank
  platform and provides a number of updates.

  The OMAP2+ platforms see a continued move from platform data into dts
  files, for many devices that relied on a mix of auxiliary data in
  addition to the DT description

  A moderate number of new SoCs and machines are added, here is a full
  list:

   - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
     (SM8250) is the current high-end phone chip, and IPQ6018 is a new
     WiFi-6 router chip.

   - Mediatek MT8516 application processor SoC for voice assistants,
     along with the "pumpkin" development board

   - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
     evaluation board.

   - Kontron "sl28" board family based on NXP LS1028A

   - Eleven variations of the new i.MX6 TechNexion Pico board, combining
     the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
     SoM carriers

   - Three additional variants of the Toradex Colibri board family, all
     based on versions of the NXP i.MX7.

   - The Pinebook Pro laptop based on Rockchip RK3399

   - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
     on the ST-Ericsson u8500 platform

   - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
     STMicroelectronics stm32mp157

   - Renesas M3ULCB starter kit for R-Car M3-W+

   - Hoperun HiHope development board with Renesas RZ/G2M

   - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
     A64

   - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
     A20

   - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"

* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
  ARM: dts: ux500: Fix missing node renames
  arm64: dts: Revert "specify console via command line"
  MAINTAINERS: Update Calxeda Highbank maintainership
  arm: dts: calxeda: Group port-phys and sgpio-gpio items
  arm: dts: calxeda: Fix interrupt grouping
  arm: dts: calxeda: Provide UART clock
  arm: dts: calxeda: Basic DT file fixes
  arm64: dts: specify console via command line
  ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
  ARM: dts: gemini: Add thermal zone to DIR-685
  ARM: dts: gemini: Rename IDE nodes
  ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
  arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
  arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
  arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
  arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
  arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
  arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
  arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
  arm64: dts: khadas-vim3: add SPIFC controller node
  ...

1 files changed, 0 insertions, 40 deletions

diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index ac7d5bb1a02f..0ebbfbb4fb1c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -74,14 +74,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* pru-icss -> l3 main */
-struct omap_hwmod_ocp_if am33xx_pruss__l3_main = {
-	.master		= &am33xx_pruss_hwmod,
-	.slave		= &am33xx_l3_main_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* gfx -> l3 main */
 struct omap_hwmod_ocp_if am33xx_gfx__l3_main = {
 	.master		= &am33xx_gfx_hwmod,
@@ -122,38 +114,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = {
 	.user		= OCP_USER_MPU,
 };
 
-/* l3 main -> tpcc */
-struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tpcc_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc0 */
-struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc0_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc1 */
-struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc1_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3 main -> tpcc2 */
-struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = {
-	.master		= &am33xx_l3_main_hwmod,
-	.slave		= &am33xx_tptc2_hwmod,
-	.clk		= "l3_gclk",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3 main -> ocmc */
 struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = {
 	.master		= &am33xx_l3_main_hwmod,