Merge tag 'integrator-armsoc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/late

Pull "This is a bunch of Integrator changes for v4.9" Linus Walleij:

- Add and fix a bunch of clocks in the DTS corresponding
  to the new clock support merged into the clk tree.
- Move the CLCD display configuration from boardfile to
  device tree using the new CLCD support merged into the
  fbdev tree.
- Cut some auxdata.
- Cut some static remappings.
- Move the sched_clock() counter to use syscon+regmap.

* tag 'integrator-armsoc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: integrator: read counter using syscon/regmap
  ARM: integrator: cut down on static maps
  ARM: integrator: delete some auxdata
  ARM: integrator: move CP CLCD display to DTS
  ARM: dts: add the core module clocks to Integrator/CP
  ARM: dts: Add the core module clocks to Integrator/AP
  ARM: dts: add the Integrator/AP baseboard clocks
  ARM: dts: set the 24MHz xtal as parent of the UART clock

1 files changed, 63 insertions, 11 deletions

diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index 79430fbfec3b..1b5e4b006b72 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -58,20 +58,37 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		xtal24mhz: xtal24mhz@24M {
+		cm24mhz: cm24mhz@24M {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 		};
 
-		/*
-		 * External oscillator on the core module, usually used
-		 * to drive video circuitry. Driven from the 24MHz clock.
-		 */
-		auxosc: cm_aux_osc@25M {
+		/* Oscillator on the core module, clocks the CPU core */
+		cmcore: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorcp-cm-core";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Oscillator on the core module, clocks the memory bus */
+		cmmem: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorcp-cm-mem";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, clocks the CLCD */
+		auxosc: auxosc@24M {
+			compatible = "arm,syscon-icst525";
 			#clock-cells = <0>;
-			compatible = "arm,integrator-cm-auxosc";
-			clocks = <&xtal24mhz>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
 		};
 
 		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
@@ -80,7 +97,7 @@
 			compatible = "fixed-factor-clock";
 			clock-div = <3>;
 			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
+			clocks = <&cm24mhz>;
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
@@ -89,7 +106,7 @@
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
 			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
+			clocks = <&cm24mhz>;
 		};
 	};
 
@@ -209,7 +226,42 @@
 			reg = <0xC0000000 0x1000>;
 			interrupts = <22>;
 			clocks = <&auxosc>, <&pclk>;
-			clock-names = "clcd", "apb_pclk";
+			clock-names = "clcdclk", "apb_pclk";
+
+			port {
+				/*
+				 * The VGA connected is implemented with a
+				 * THS8134A triple DAC that can be run in 24bit
+				 * or 16bit RGB mode.
+				 */
+				clcd_pads: endpoint {
+					remote-endpoint = <&clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+				};
+			};
+
+			panel {
+				compatible = "panel-dpi";
+
+				port {
+					clcd_panel: endpoint {
+						remote-endpoint = <&clcd_pads>;
+					};
+				};
+
+				/* Standard 640x480 VGA timings */
+				panel-timing {
+					clock-frequency = <25175000>;
+					hactive = <640>;
+					hback-porch = <48>;
+					hfront-porch = <16>;
+					hsync-len = <96>;
+					vactive = <480>;
+					vback-porch = <33>;
+					vfront-porch = <10>;
+					vsync-len = <2>;
+				};
+			};
 		};
 	};
 };