summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorYisen.Zhuang\(Zhuangyuzeng\) <Yisen.Zhuang@huawei.com>2016-04-23 17:05:15 +0800
committerDavid S. Miller <davem@davemloft.net>2016-04-26 01:09:18 -0400
commit2fc695a1bb00141a0f5df74e7a19e125f4babaa5 (patch)
tree59cc2192ca77b27d7e3641931609a7d91d4593b3 /Documentation
parent0d768fc62def08628affa4a2abe4f319926027a9 (diff)
Documentation: Bindings: Update DT binding for separating dsaf dev support
Because debug dsaf port was separated from service dsaf port, this patch updates the related information of DT binding. Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt59
1 files changed, 49 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
index ecacfa44b1eb..5ccd4f002a67 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
@@ -7,19 +7,47 @@ Required properties:
- mode: dsa fabric mode string. only support one of dsaf modes like these:
"2port-64vf",
"6port-16rss",
- "6port-16vf".
+ "6port-16vf",
+ "single-port".
- interrupt-parent: the interrupt parent of this device.
- interrupts: should contain the DSA Fabric and rcb interrupt.
- reg: specifies base physical address(es) and size of the device registers.
- The first region is external interface control register base and size.
- The second region is SerDes base register and size.
+ The first region is external interface control register base and size(optional,
+ only be used when subctrl-syscon is not exists). It is recommended using
+ subctrl-syscon rather than this address.
+ The second region is SerDes base register and size(optional, only be used when
+ serdes-syscon in port node is not exists. It is recommended using
+ serdes-syscon rather than this address.
The third region is the PPE register base and size.
- The fourth region is dsa fabric base register and size.
- The fifth region is cpld base register and size, it is not required if do not use cpld.
-- phy-handle: phy handle of physicl port, 0 if not any phy device. see ethernet.txt [1].
+ The fourth region is dsa fabric base register and size. It is not required for
+ single-port mode.
+- reg-names: may be ppe-base and(or) dsaf-base. It is used to find the
+ corresponding reg's index.
+
+- phy-handle: phy handle of physicl port, 0 if not any phy device. It is optional
+ attribute. If port node is exists, phy-handle in each port node will be used.
+ see ethernet.txt [1].
+- subctrl-syscon: is syscon handle for external interface control register.
+- reset-field-offset: is offset of reset field. Its value depends on the hardware
+ user manual.
- buf-size: rx buffer size, should be 16-1024.
- desc-num: number of description in TX and RX queue, should be 512, 1024, 2048 or 4096.
+- port: subnodes of dsaf. A dsaf node may contain several port nodes(Depending
+ on mode of dsaf). Port node contain some attributes listed below:
+- port-id: is physical port index in one dsaf.
+- phy-handle: phy handle of physicl port. It is not required if there isn't
+ phy device. see ethernet.txt [1].
+- serdes-syscon: is syscon handle for SerDes register.
+- cpld-syscon: is syscon handle for cpld register. It is not required if there
+ isn't cpld device.
+- cpld-ctrl-reg: is cpld register offset. It is not required if there isn't
+ cpld-syscon.
+- port-rst-offset: is offset of reset field for each port in dsaf. Its value
+ depends on the hardware user manual.
+- port-mode-offset: is offset of port mode field for each port in dsaf. Its
+ value depends on the hardware user manual.
+
[1] Documentation/devicetree/bindings/net/phy.txt
Example:
@@ -28,11 +56,11 @@ dsaf0: dsa@c7000000 {
compatible = "hisilicon,hns-dsaf-v1";
mode = "6port-16rss";
interrupt-parent = <&mbigen_dsa>;
- reg = <0x0 0xC0000000 0x0 0x420000
- 0x0 0xC2000000 0x0 0x300000
- 0x0 0xc5000000 0x0 0x890000
+ reg = <0x0 0xc5000000 0x0 0x890000
0x0 0xc7000000 0x0 0x60000>;
- phy-handle = <0 0 0 0 &soc0_phy4 &soc0_phy5 0 0>;
+ reg-names = "ppe-base", "dsaf-base";
+ subctrl-syscon = <&subctrl>;
+ reset-field-offset = 0;
interrupts = <131 4>,<132 4>, <133 4>,<134 4>,
<135 4>,<136 4>, <137 4>,<138 4>,
<139 4>,<140 4>, <141 4>,<142 4>,
@@ -43,4 +71,15 @@ dsaf0: dsa@c7000000 {
buf-size = <4096>;
desc-num = <1024>;
dma-coherent;
+
+ prot@0 {
+ port-id = 0;
+ phy-handle = <&phy0>;
+ serdes-syscon = <&serdes>;
+ };
+
+ prot@1 {
+ port-id = 1;
+ serdes-syscon = <&serdes>;
+ };
};