Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support more Realtek wireless chips, from Jes Sorenson.

   2) New BPF types for per-cpu hash and arrap maps, from Alexei
      Starovoitov.

   3) Make several TCP sysctls per-namespace, from Nikolay Borisov.

   4) Allow the use of SO_REUSEPORT in order to do per-thread processing
   of incoming TCP/UDP connections.  The muxing can be done using a
   BPF program which hashes the incoming packet.  From Craig Gallek.

   5) Add a multiplexer for TCP streams, to provide a messaged based
      interface.  BPF programs can be used to determine the message
      boundaries.  From Tom Herbert.

   6) Add 802.1AE MACSEC support, from Sabrina Dubroca.

   7) Avoid factorial complexity when taking down an inetdev interface
      with lots of configured addresses.  We were doing things like
      traversing the entire address less for each address removed, and
      flushing the entire netfilter conntrack table for every address as
      well.

   8) Add and use SKB bulk free infrastructure, from Jesper Brouer.

   9) Allow offloading u32 classifiers to hardware, and implement for
      ixgbe, from John Fastabend.

  10) Allow configuring IRQ coalescing parameters on a per-queue basis,
      from Kan Liang.

  11) Extend ethtool so that larger link mode masks can be supported.
      From David Decotigny.

  12) Introduce devlink, which can be used to configure port link types
      (ethernet vs Infiniband, etc.), port splitting, and switch device
      level attributes as a whole.  From Jiri Pirko.

  13) Hardware offload support for flower classifiers, from Amir Vadai.

  14) Add "Local Checksum Offload".  Basically, for a tunneled packet
      the checksum of the outer header is 'constant' (because with the
      checksum field filled into the inner protocol header, the payload
      of the outer frame checksums to 'zero'), and we can take advantage
      of that in various ways.  From Edward Cree"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
  bonding: fix bond_get_stats()
  net: bcmgenet: fix dma api length mismatch
  net/mlx4_core: Fix backward compatibility on VFs
  phy: mdio-thunder: Fix some Kconfig typos
  lan78xx: add ndo_get_stats64
  lan78xx: handle statistics counter rollover
  RDS: TCP: Remove unused constant
  RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
  net: smc911x: convert pxa dma to dmaengine
  team: remove duplicate set of flag IFF_MULTICAST
  bonding: remove duplicate set of flag IFF_MULTICAST
  net: fix a comment typo
  ethernet: micrel: fix some error codes
  ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
  bpf, dst: add and use dst_tclassid helper
  bpf: make skb->tc_classid also readable
  net: mvneta: bm: clarify dependencies
  cls_bpf: reset class and reuse major in da
  ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
  ldmvsw: Add ldmvsw.c driver code
  ...

17 files changed, 440 insertions, 31 deletions

diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt
index a1d71eb43b20..c73a0e9c625e 100644
--- a/Documentation/devicetree/bindings/net/arc_emac.txt
+++ b/Documentation/devicetree/bindings/net/arc_emac.txt
@@ -7,6 +7,13 @@ Required properties:
 - max-speed: see ethernet.txt file in the same directory.
 - phy: see ethernet.txt file in the same directory.
 
+Optional properties:
+- phy-reset-gpios : Should specify the gpio for phy reset
+- phy-reset-duration : Reset duration in milliseconds.  Should present
+  only if property "phy-reset-gpios" is available.  Missing the property
+  will have the duration be 1 millisecond.  Numbers greater than 1000 are
+  invalid and 1 millisecond will be used instead.
+
 Clock handling:
 The clock frequency is needed to calculate and set polling period of EMAC.
 It must be provided by one of:
diff --git a/Documentation/devicetree/bindings/net/can/ifi_canfd.txt b/Documentation/devicetree/bindings/net/can/ifi_canfd.txt
new file mode 100644
index 000000000000..20ea5c70ab82
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ifi_canfd.txt
@@ -0,0 +1,15 @@
+IFI CANFD controller
+--------------------
+
+Required properties:
+  - compatible: Should be "ifi,canfd-1.0"
+  - reg: Should contain CAN controller registers location and length
+  - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+	canfd0: canfd@ff220000 {
+		compatible = "ifi,canfd-1.0";
+		reg = <0xff220000 0x00001000>;
+		interrupts = <0 43 0>;
+	};
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index 002d8440bf66..8d40ab27bc8c 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -6,6 +6,17 @@ Required properties:
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
 	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
 	      "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC.
+	      "renesas,can-r8a7792" if CAN controller is a part of R8A7792 SoC.
+	      "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC.
+	      "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
+	      "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
+	      "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
+	      "renesas,rcar-gen2-can" for a generic R-Car Gen2 compatible device.
+	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
+	      When compatible with the generic version, nodes must list the
+	      SoC-specific version corresponding to the platform first
+	      followed by the generic version.
+
 - reg: physical base address and size of the R-Car CAN register map.
 - interrupts: interrupt specifier for the sole interrupt.
 - clocks: phandles and clock specifiers for 3 CAN clock inputs.
@@ -13,6 +24,15 @@ Required properties:
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".
 
+Required properties for "renesas,can-r8a7795" compatible:
+In R8A7795 SoC, "clkp2" can be CANFD clock. This is a div6 clock and can be
+used by both CAN and CAN FD controller at the same time. It needs to be scaled
+to maximum frequency if any of these controllers use it. This is done using
+the below properties.
+
+- assigned-clocks: phandle of clkp2(CANFD) clock.
+- assigned-clock-rates: maximum frequency of this clock.
+
 Optional properties:
 - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
 			    <0x0> (default) : Peripheral clock (clkp1)
@@ -25,7 +45,7 @@ Example
 SoC common .dtsi file:
 
 	can0: can@e6e80000 {
-		compatible = "renesas,can-r8a7791";
+		compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
 		reg = <0 0xe6e80000 0 0x1000>;
 		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
diff --git a/Documentation/devicetree/bindings/net/can/sja1000.txt b/Documentation/devicetree/bindings/net/can/sja1000.txt
index b4a6d53fb01a..ac3160eca96a 100644
--- a/Documentation/devicetree/bindings/net/can/sja1000.txt
+++ b/Documentation/devicetree/bindings/net/can/sja1000.txt
@@ -2,7 +2,7 @@ Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
 
 Required properties:
 
-- compatible : should be "nxp,sja1000".
+- compatible : should be one of "nxp,sja1000", "technologic,sja1000".
 
 - reg : should specify the chip select, address offset and size required
 	to map the registers of the SJA1000. The size is usually 0x80.
@@ -14,6 +14,7 @@ Optional properties:
 
 - reg-io-width : Specify the size (in bytes) of the IO accesses that
 	should be performed on the device.  Valid value is 1, 2 or 4.
+	This property is ignored for technologic version.
 	Default to 1 (8 bits).
 
 - nxp,external-clock-frequency : Frequency of the external oscillator
diff --git a/Documentation/devicetree/bindings/net/cavium-mdio.txt b/Documentation/devicetree/bindings/net/cavium-mdio.txt
index 04cb7491d232..020df08b8a30 100644
--- a/Documentation/devicetree/bindings/net/cavium-mdio.txt
+++ b/Documentation/devicetree/bindings/net/cavium-mdio.txt
@@ -1,9 +1,12 @@
 * System Management Interface (SMI) / MDIO
 
 Properties:
-- compatible: "cavium,octeon-3860-mdio"
+- compatible: One of:
 
-  Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+   "cavium,octeon-3860-mdio": Compatibility with all cn3XXX, cn5XXX
+                       and cn6XXX SOCs.
+
+   "cavium,thunder-8890-mdio": Compatibility with all cn8XXX SOCs.
 
 - reg: The base address of the MDIO bus controller register bank.
 
@@ -25,3 +28,57 @@ Example:
 			reg = <0>;
 		};
 	};
+
+
+* System Management Interface (SMI) / MDIO Nexus
+
+  Several mdio buses may be gathered as children of a single PCI
+  device, this PCI device is the nexus of the buses.
+
+Properties:
+
+- compatible: "cavium,thunder-8890-mdio-nexus";
+
+- reg: The PCI device and function numbers of the nexus device.
+
+- #address-cells: Must be <2>.
+
+- #size-cells: Must be <2>.
+
+- ranges: As needed for mapping of the MDIO bus device registers.
+
+- assigned-addresses: As needed for mapping of the MDIO bus device registers.
+
+Example:
+
+        mdio-nexus@1,3 {
+                compatible = "cavium,thunder-8890-mdio-nexus";
+                #address-cells = <2>;
+                #size-cells = <2>;
+                reg = <0x0b00 0 0 0 0>; /* DEVFN = 0x0b (1:3) */
+                assigned-addresses = <0x03000000 0x87e0 0x05000000 0x0 0x800000>;
+                ranges = <0x87e0 0x05000000 0x03000000 0x87e0 0x05000000 0x0 0x800000>;
+
+                mdio0@87e0,05003800 {
+                        compatible = "cavium,thunder-8890-mdio";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0x87e0 0x05003800 0x0 0x30>;
+
+                        ethernet-phy@0 {
+                                ...
+                                reg = <0>;
+                        };
+                };
+                mdio0@87e0,05003880 {
+                        compatible = "cavium,thunder-8890-mdio";
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0x87e0 0x05003880 0x0 0x30>;
+
+                        ethernet-phy@0 {
+                                ...
+                                reg = <0>;
+                        };
+                };
+        };
diff --git a/Documentation/devicetree/bindings/net/emac_rockchip.txt b/Documentation/devicetree/bindings/net/emac_rockchip.txt
index 8dc1c79fef7f..05bd7dafce17 100644
--- a/Documentation/devicetree/bindings/net/emac_rockchip.txt
+++ b/Documentation/devicetree/bindings/net/emac_rockchip.txt
@@ -1,8 +1,10 @@
-* ARC EMAC 10/100 Ethernet platform driver for Rockchip Rk3066/RK3188 SoCs
+* ARC EMAC 10/100 Ethernet platform driver for Rockchip RK3036/RK3066/RK3188 SoCs
 
 Required properties:
-- compatible: Should be "rockchip,rk3066-emac" or "rockchip,rk3188-emac"
-  according to the target SoC.
+- compatible: should be "rockchip,<name>-emac"
+   "rockchip,rk3036-emac": found on RK3036 SoCs
+   "rockchip,rk3066-emac": found on RK3066 SoCs
+   "rockchip,rk3188-emac": found on RK3188 SoCs
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the EMAC interrupts
 - rockchip,grf: phandle to the syscon grf used to control speed and mode
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index a9eb611bee68..b037a9d78d93 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -12,6 +12,9 @@ Optional properties:
   only if property "phy-reset-gpios" is available.  Missing the property
   will have the duration be 1 millisecond.  Numbers greater than 1000 are
   invalid and 1 millisecond will be used instead.
+- phy-reset-active-high : If present then the reset sequence using the GPIO
+  specified in the "phy-reset-gpios" property is reversed (H=reset state,
+  L=operation state).
 - phy-supply : regulator that powers the Ethernet PHY.
 - phy-handle : phandle to the PHY device connected to this device.
 - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index d2e243b1ec0e..b5a42df4c928 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -25,6 +25,8 @@ Required properties:
 
 Optional properties for PHY child node:
 - reset-gpios : Should specify the gpio for phy reset
+- magic-packet : If present, indicates that the hardware supports waking
+  up via magic packet.
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index d0cb8693963b..73be8970815e 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -18,15 +18,30 @@ Optional properties:
   "core" for core clock and "bus" for the optional bus clock.
 
 
+Optional properties (valid only for Armada XP/38x):
+
+- buffer-manager: a phandle to a buffer manager node. Please refer to
+  Documentation/devicetree/bindings/net/marvell-neta-bm.txt
+- bm,pool-long: ID of a pool, that will accept all packets of a size
+  higher than 'short' pool's threshold (if set) and up to MTU value.
+  Obligatory, when the port is supposed to use hardware
+  buffer management.
+- bm,pool-short: ID of a pool, that will be used for accepting
+  packets of a size lower than given threshold. If not set, the port
+  will use a single 'long' pool for all packets, as defined above.
+
 Example:
 
-ethernet@d0070000 {
+ethernet@70000 {
 	compatible = "marvell,armada-370-neta";
-	reg = <0xd0070000 0x2500>;
+	reg = <0x70000 0x2500>;
 	interrupts = <8>;
 	clocks = <&gate_clk 4>;
 	tx-csum-limit = <9800>
 	status = "okay";
 	phy = <&phy0>;
 	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
 };
diff --git a/Documentation/devicetree/bindings/net/marvell-neta-bm.txt b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt
new file mode 100644
index 000000000000..c1b1d7c3bde1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-neta-bm.txt
@@ -0,0 +1,49 @@
+* Marvell Armada 380/XP Buffer Manager driver (BM)
+
+Required properties:
+
+- compatible: should be "marvell,armada-380-neta-bm".
+- reg: address and length of the register set for the device.
+- clocks: a pointer to the reference clock for this device.
+- internal-mem: a phandle to BM internal SRAM definition.
+
+Optional properties (port):
+
+- pool<0 : 3>,capacity: size of external buffer pointers' ring maintained
+  in DRAM. Can be set for each pool (id 0 : 3) separately. The value has
+  to be chosen between 128 and 16352 and it also has to be aligned to 32.
+  Otherwise the driver would adjust a given number or choose default if
+  not set.
+- pool<0 : 3>,pkt-size: maximum size of a packet accepted by a given buffer
+  pointers' pool (id 0 : 3). It will be taken into consideration only when pool
+  type is 'short'. For 'long' ones it would be overridden by port's MTU.
+  If not set a driver will choose a default value.
+
+In order to see how to hook the BM to a given ethernet port, please
+refer to Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt.
+
+Example:
+
+- main node:
+
+bm: bm@c8000 {
+	compatible = "marvell,armada-380-neta-bm";
+	reg = <0xc8000 0xac>;
+	clocks = <&gateclk 13>;
+	internal-mem = <&bm_bppi>;
+	status = "okay";
+	pool2,capacity = <4096>;
+	pool1,pkt-size = <512>;
+};
+
+- internal SRAM node:
+
+bm_bppi: bm-bppi {
+	compatible = "mmio-sram";
+	reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+	ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&gateclk 13>;
+	status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
new file mode 100644
index 000000000000..5ca79290eabf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
@@ -0,0 +1,77 @@
+MediaTek Frame Engine Ethernet controller
+=========================================
+
+The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs
+have dual GMAC each represented by a child node..
+
+* Ethernet controller node
+
+Required properties:
+- compatible: Should be "mediatek,mt7623-eth"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the frame engines interrupt
+- clocks: the clock used by the core
+- clock-names: the names of the clock listed in the clocks property. These are
+	"ethif", "esw", "gp2", "gp1"
+- power-domains: phandle to the power domain that the ethernet is part of
+- resets: Should contain a phandle to the ethsys reset signal
+- reset-names: Should contain the reset signal name "eth"
+- mediatek,ethsys: phandle to the syscon node that handles the port setup
+- mediatek,pctl: phandle to the syscon node that handles the ports slew rate
+	and driver current
+
+Optional properties:
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+
+
+* Ethernet MAC node
+
+Required properties:
+- compatible: Should be "mediatek,eth-mac"
+- reg: The number of the MAC
+- phy-handle: see ethernet.txt file in the same directory.
+
+Example:
+
+eth: ethernet@1b100000 {
+	compatible = "mediatek,mt7623-eth";
+	reg = <0 0x1b100000 0 0x20000>;
+	clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+		 <&ethsys CLK_ETHSYS_ESW>,
+		 <&ethsys CLK_ETHSYS_GP2>,
+		 <&ethsys CLK_ETHSYS_GP1>;
+	clock-names = "ethif", "esw", "gp2", "gp1";
+	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+	resets = <&ethsys MT2701_ETHSYS_ETH_RST>;
+	reset-names = "eth";
+	mediatek,ethsys = <&ethsys>;
+	mediatek,pctl = <&syscfg_pctl_a>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	gmac1: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-handle = <&phy0>;
+	};
+
+	gmac2: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-handle = <&phy1>;
+	};
+
+	mdio-bus {
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			phy-mode = "rgmii";
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			phy-mode = "rgmii";
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/micrel-ks8995.txt b/Documentation/devicetree/bindings/net/micrel-ks8995.txt
new file mode 100644
index 000000000000..281bc2498d12
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/micrel-ks8995.txt
@@ -0,0 +1,20 @@
+Micrel KS8995 SPI controlled Ethernet Switch families
+
+Required properties (according to spi-bus.txt):
+- compatible: either "micrel,ks8995", "micrel,ksz8864" or "micrel,ksz8795"
+
+Optional properties:
+- reset-gpios : phandle of gpio that will be used to reset chip during probe
+
+Example:
+
+spi-master {
+	...
+	switch@0 {
+		compatible = "micrel,ksz8795";
+
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index e862a922bd3f..6605d19601c2 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -17,7 +17,25 @@ Required properties:
 	The 1st cell is reset pre-delay in micro seconds.
 	The 2nd cell is reset pulse in micro seconds.
 	The 3rd cell is reset post-delay in micro seconds.
+
+Optional properties:
+- resets: Should contain a phandle to the STMMAC reset signal, if any
+- reset-names: Should contain the reset signal name "stmmaceth", if a
+	reset phandle is given
+- max-frame-size: See ethernet.txt file in the same directory
+- clocks: If present, the first clock should be the GMAC main clock and
+  the second clock should be peripheral's register interface clock. Further
+  clocks may be specified in derived bindings.
+- clock-names: One name for each entry in the clocks property, the
+  first one should be "stmmaceth" and the second one should be "pclk".
+- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
+  available this clock is used for programming the Timestamp Addend Register.
+  If not passed then the system clock will be used and this is fine on some
+  platforms.
+- tx-fifo-depth: See ethernet.txt file in the same directory
+- rx-fifo-depth: See ethernet.txt file in the same directory
 - snps,pbl		Programmable Burst Length
+- snps,aal		Address-Aligned Beats
 - snps,fixed-burst	Program the DMA to use the fixed burst mode
 - snps,mixed-burst	Program the DMA to use the mixed burst mode
 - snps,force_thresh_dma_mode	Force DMA to use the threshold mode for
@@ -29,27 +47,28 @@ Required properties:
 				supported by this device instance
 - snps,perfect-filter-entries:	Number of perfect filter entries supported
 				by this device instance
-
-Optional properties:
-- resets: Should contain a phandle to the STMMAC reset signal, if any
-- reset-names: Should contain the reset signal name "stmmaceth", if a
-	reset phandle is given
-- max-frame-size: See ethernet.txt file in the same directory
-- clocks: If present, the first clock should be the GMAC main clock
-  The optional second clock should be peripheral's register interface clock.
-  The third optional clock should be the ptp reference clock.
-  Further clocks may be specified in derived bindings.
-- clock-names: One name for each entry in the clocks property.
-  The first one should be "stmmaceth".
-  The optional second one should be "pclk".
-  The optional third one should be "clk_ptp_ref".
-- snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register.
-- tx-fifo-depth: See ethernet.txt file in the same directory
-- rx-fifo-depth: See ethernet.txt file in the same directory
+- AXI BUS Mode parameters: below the list of all the parameters to program the
+			   AXI register inside the DMA module:
+	- snps,lpi_en: enable Low Power Interface
+	- snps,xit_frm: unlock on WoL
+	- snps,wr_osr_lmt: max write oustanding req. limit
+	- snps,rd_osr_lmt: max read oustanding req. limit
+	- snps,kbbe: do not cross 1KiB boundary.
+	- snps,axi_all: align address
+	- snps,blen: this is a vector of supported burst length.
+	- snps,fb: fixed-burst
+	- snps,mb: mixed-burst
+	- snps,rb: rebuild INCRx Burst
 - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
 
 Examples:
 
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,wr_osr_lmt = <0xf>;
+		snps,rd_osr_lmt = <0xf>;
+		snps,blen = <256 128 64 32 0 0 0>;
+	};
+
 	gmac0: ethernet@e0800000 {
 		compatible = "st,spear600-gmac";
 		reg = <0xe0800000 0x8000>;
@@ -65,6 +84,7 @@ Examples:
 		tx-fifo-depth = <16384>;
 		clocks = <&clock>;
 		clock-names = "stmmaceth";
+		snps,axi-config = <&stmmac_axi_setup>;
 		mdio0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index edefc26c6204..96aae6b4f736 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -1,17 +1,46 @@
 * Qualcomm Atheros ath10k wireless devices
 
-For ath10k devices the calibration data can be provided through Device
-Tree. The node is a child node of the PCI controller.
-
 Required properties:
--compatible : Should be "qcom,ath10k"
+- compatible: Should be one of the following:
+	* "qcom,ath10k"
+	* "qcom,ipq4019-wifi"
+
+PCI based devices uses compatible string "qcom,ath10k" and takes only
+calibration data via "qcom,ath10k-calibration-data". Rest of the properties
+are not applicable for PCI based devices.
+
+AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi"
+and also uses most of the properties defined in this doc.
 
 Optional properties:
+- reg: Address and length of the register set for the device.
+- resets: Must contain an entry for each entry in reset-names.
+          See ../reset/reseti.txt for details.
+- reset-names: Must include the list of following reset names,
+	       "wifi_cpu_init"
+	       "wifi_radio_srif"
+	       "wifi_radio_warm"
+	       "wifi_radio_cold"
+	       "wifi_core_warm"
+	       "wifi_core_cold"
+- clocks: List of clock specifiers, must contain an entry for each required
+          entry in clock-names.
+- clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref",
+               "wifi_wcss_rtc".
+- interrupts: List of interrupt lines. Must contain an entry
+	      for each entry in the interrupt-names property.
+- interrupt-names: Must include the entries for MSI interrupt
+		   names ("msi0" to "msi15") and legacy interrupt
+		   name ("legacy"),
+- qcom,msi_addr: MSI interrupt address.
+- qcom,msi_base: Base value to add before writing MSI data into
+		MSI address register.
 - qcom,ath10k-calibration-data : calibration data as an array, the
 				 length can vary between hw versions
 
+Example (to supply the calibration data alone):
 
-Example:
+In this example, the node is defined as child node of the PCI controller.
 
 pci {
 	pcie@0 {
@@ -28,3 +57,53 @@ pci {
 		};
 	};
 };
+
+Example (to supply ipq4019 SoC wifi block details):
+
+wifi0: wifi@a000000 {
+	compatible = "qcom,ipq4019-wifi";
+	reg = <0xa000000 0x200000>;
+	resets = <&gcc WIFI0_CPU_INIT_RESET>,
+		 <&gcc WIFI0_RADIO_SRIF_RESET>,
+		 <&gcc WIFI0_RADIO_WARM_RESET>,
+		 <&gcc WIFI0_RADIO_COLD_RESET>,
+		 <&gcc WIFI0_CORE_WARM_RESET>,
+		 <&gcc WIFI0_CORE_COLD_RESET>;
+	reset-names = "wifi_cpu_init",
+		      "wifi_radio_srif",
+		      "wifi_radio_warm",
+		      "wifi_radio_cold",
+		      "wifi_core_warm",
+		      "wifi_core_cold";
+	clocks = <&gcc GCC_WCSS2G_CLK>,
+		 <&gcc GCC_WCSS2G_REF_CLK>,
+		 <&gcc GCC_WCSS2G_RTC_CLK>;
+	clock-names = "wifi_wcss_cmd",
+		      "wifi_wcss_ref",
+		      "wifi_wcss_rtc";
+	interrupts = <0 0x20 0x1>,
+		     <0 0x21 0x1>,
+		     <0 0x22 0x1>,
+		     <0 0x23 0x1>,
+		     <0 0x24 0x1>,
+		     <0 0x25 0x1>,
+		     <0 0x26 0x1>,
+		     <0 0x27 0x1>,
+		     <0 0x28 0x1>,
+		     <0 0x29 0x1>,
+		     <0 0x2a 0x1>,
+		     <0 0x2b 0x1>,
+		     <0 0x2c 0x1>,
+		     <0 0x2d 0x1>,
+		     <0 0x2e 0x1>,
+		     <0 0x2f 0x1>,
+		     <0 0xa8 0x0>;
+	interrupt-names = "msi0",  "msi1",  "msi2",  "msi3",
+			  "msi4",  "msi5",  "msi6",  "msi7",
+			  "msi8",  "msi9",  "msi10", "msi11",
+			  "msi12", "msi13", "msi14", "msi15",
+			  "legacy";
+	qcom,msi_addr = <0x0b006040>;
+	qcom,msi_base = <0x40>;
+	qcom,ath10k-calibration-data = [ 01 02 03 ... ];
+};
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
new file mode 100644
index 000000000000..9180724e182c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
@@ -0,0 +1,36 @@
+* Texas Instruments wl1271 wireless lan controller
+
+The wl1271 chip can be connected via SPI or via SDIO. This
+document describes the binding for the SPI connected chip.
+
+Required properties:
+- compatible :          Should be "ti,wl1271"
+- reg :                 Chip select address of device
+- spi-max-frequency :   Maximum SPI clocking speed of device in Hz
+- ref-clock-frequency : Reference clock frequency
+- interrupt-parent, interrupts :
+                        Should contain parameters for 1 interrupt line.
+                        Interrupt parameters: parent, line number, type.
+- vwlan-supply :        Point the node of the regulator that powers/enable the wl1271 chip
+
+Optional properties:
+- clock-xtal :          boolean, clock is generated from XTAL
+
+- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
+  for optional SPI connection related properties,
+
+Examples:
+
+&spi1 {
+	wl1271@1 {
+		compatible = "ti,wl1271";
+
+		reg = <1>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/sram/sram.txt b/Documentation/devicetree/bindings/sram/sram.txt
index 42ee9438b771..227e3a341af1 100644
--- a/Documentation/devicetree/bindings/sram/sram.txt
+++ b/Documentation/devicetree/bindings/sram/sram.txt
@@ -25,6 +25,11 @@ Required properties in the sram node:
 - ranges : standard definition, should translate from local addresses
            within the sram to bus addresses
 
+Optional properties in the sram node:
+
+- no-memory-wc : the flag indicating, that SRAM memory region has not to
+                 be remapped as write combining. WC is used by default.
+
 Required properties in the area nodes:
 
 - reg : iomem address range, relative to the SRAM range
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ee66defcdd8b..156731cc649c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -112,6 +112,7 @@ hp	Hewlett Packard
 i2se	I2SE GmbH
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
+ifi	Ingenieurburo Fur Ic-Technologie (I/F/I)
 iom	Iomega Corporation
 img	Imagination Technologies Ltd.
 ingenic	Ingenic Semiconductor