diff options
author | Eric Biggers <ebiggers@google.com> | 2021-01-25 16:14:48 -0800 |
---|---|---|
committer | Ulf Hansson <ulf.hansson@linaro.org> | 2021-02-01 12:02:33 +0100 |
commit | 93f1c150cb0d043e1e8985db7824b4e2e1ac653f (patch) | |
tree | 5c999fb86e72da2a2a12b871c122588ff5907598 | |
parent | d76d9d7d1009968dd3a0fc30e5f5ee9fbffc1350 (diff) |
mmc: core: Add basic support for inline encryption
In preparation for adding CQHCI crypto engine (inline encryption)
support, add the code required to make mmc_core and mmc_block aware of
inline encryption. Specifically:
- Add a capability flag MMC_CAP2_CRYPTO to struct mmc_host. Drivers
will set this if the host and driver support inline encryption.
- Embed a blk_keyslot_manager in struct mmc_host. Drivers will
initialize this (as a device-managed resource) if the host and driver
support inline encryption. mmc_block registers this keyslot manager
with the request_queue of any MMC card attached to the host.
- Make mmc_block copy the crypto keyslot and crypto data unit number
from struct request to struct mmc_request, so that drivers will have
access to them.
- If the MMC host is reset, reprogram all the keyslots to ensure that
the software state stays in sync with the hardware state.
Co-developed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Reviewed-and-tested-by: Peng Zhou <peng.zhou@mediatek.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210126001456.382989-2-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-rw-r--r-- | drivers/mmc/core/Kconfig | 8 | ||||
-rw-r--r-- | drivers/mmc/core/Makefile | 1 | ||||
-rw-r--r-- | drivers/mmc/core/block.c | 3 | ||||
-rw-r--r-- | drivers/mmc/core/core.c | 3 | ||||
-rw-r--r-- | drivers/mmc/core/crypto.c | 48 | ||||
-rw-r--r-- | drivers/mmc/core/crypto.h | 40 | ||||
-rw-r--r-- | drivers/mmc/core/host.c | 1 | ||||
-rw-r--r-- | drivers/mmc/core/queue.c | 3 | ||||
-rw-r--r-- | include/linux/mmc/core.h | 6 | ||||
-rw-r--r-- | include/linux/mmc/host.h | 11 |
10 files changed, 124 insertions, 0 deletions
diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig index c12fe13e4b14..ae8b69aee619 100644 --- a/drivers/mmc/core/Kconfig +++ b/drivers/mmc/core/Kconfig @@ -81,3 +81,11 @@ config MMC_TEST This driver is only of interest to those developing or testing a host driver. Most people should say N here. +config MMC_CRYPTO + bool "MMC Crypto Engine Support" + depends on BLK_INLINE_ENCRYPTION + help + Enable Crypto Engine Support in MMC. + Enabling this makes it possible for the kernel to use the crypto + capabilities of the MMC device (if present) to perform crypto + operations on data being transferred to/from the device. diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile index 95ffe008ebdf..6a907736cd7a 100644 --- a/drivers/mmc/core/Makefile +++ b/drivers/mmc/core/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_MMC_BLOCK) += mmc_block.o mmc_block-objs := block.o queue.o obj-$(CONFIG_MMC_TEST) += mmc_test.o obj-$(CONFIG_SDIO_UART) += sdio_uart.o +mmc_core-$(CONFIG_MMC_CRYPTO) += crypto.o diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 42e27a298218..b877f62df366 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -51,6 +51,7 @@ #include "block.h" #include "core.h" #include "card.h" +#include "crypto.h" #include "host.h" #include "bus.h" #include "mmc_ops.h" @@ -1247,6 +1248,8 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq, memset(brq, 0, sizeof(struct mmc_blk_request)); + mmc_crypto_prepare_req(mqrq); + brq->mrq.data = &brq->data; brq->mrq.tag = req->tag; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 49d9117550af..1136b859ddd8 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -37,6 +37,7 @@ #include "core.h" #include "card.h" +#include "crypto.h" #include "bus.h" #include "host.h" #include "sdio_bus.h" @@ -992,6 +993,8 @@ void mmc_set_initial_state(struct mmc_host *host) host->ops->hs400_enhanced_strobe(host, &host->ios); mmc_set_ios(host); + + mmc_crypto_set_initial_state(host); } /** diff --git a/drivers/mmc/core/crypto.c b/drivers/mmc/core/crypto.c new file mode 100644 index 000000000000..419a368f8402 --- /dev/null +++ b/drivers/mmc/core/crypto.c @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MMC crypto engine (inline encryption) support + * + * Copyright 2020 Google LLC + */ + +#include <linux/blk-crypto.h> +#include <linux/mmc/host.h> + +#include "core.h" +#include "crypto.h" +#include "queue.h" + +void mmc_crypto_set_initial_state(struct mmc_host *host) +{ + /* Reset might clear all keys, so reprogram all the keys. */ + if (host->caps2 & MMC_CAP2_CRYPTO) + blk_ksm_reprogram_all_keys(&host->ksm); +} + +void mmc_crypto_setup_queue(struct request_queue *q, struct mmc_host *host) +{ + if (host->caps2 & MMC_CAP2_CRYPTO) + blk_ksm_register(&host->ksm, q); +} +EXPORT_SYMBOL_GPL(mmc_crypto_setup_queue); + +void mmc_crypto_prepare_req(struct mmc_queue_req *mqrq) +{ + struct request *req = mmc_queue_req_to_req(mqrq); + struct mmc_request *mrq = &mqrq->brq.mrq; + + if (!req->crypt_keyslot) + return; + + mrq->crypto_enabled = true; + mrq->crypto_key_slot = blk_ksm_get_slot_idx(req->crypt_keyslot); + + /* + * For now we assume that all MMC drivers set max_dun_bytes_supported=4, + * which is the limit for CQHCI crypto. So all DUNs should be 32-bit. + */ + WARN_ON_ONCE(req->crypt_ctx->bc_dun[0] > U32_MAX); + + mrq->data_unit_num = req->crypt_ctx->bc_dun[0]; +} +EXPORT_SYMBOL_GPL(mmc_crypto_prepare_req); diff --git a/drivers/mmc/core/crypto.h b/drivers/mmc/core/crypto.h new file mode 100644 index 000000000000..fbe9a520bf90 --- /dev/null +++ b/drivers/mmc/core/crypto.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * MMC crypto engine (inline encryption) support + * + * Copyright 2020 Google LLC + */ + +#ifndef _MMC_CORE_CRYPTO_H +#define _MMC_CORE_CRYPTO_H + +struct mmc_host; +struct mmc_queue_req; +struct request_queue; + +#ifdef CONFIG_MMC_CRYPTO + +void mmc_crypto_set_initial_state(struct mmc_host *host); + +void mmc_crypto_setup_queue(struct request_queue *q, struct mmc_host *host); + +void mmc_crypto_prepare_req(struct mmc_queue_req *mqrq); + +#else /* CONFIG_MMC_CRYPTO */ + +static inline void mmc_crypto_set_initial_state(struct mmc_host *host) +{ +} + +static inline void mmc_crypto_setup_queue(struct request_queue *q, + struct mmc_host *host) +{ +} + +static inline void mmc_crypto_prepare_req(struct mmc_queue_req *mqrq) +{ +} + +#endif /* !CONFIG_MMC_CRYPTO */ + +#endif /* _MMC_CORE_CRYPTO_H */ diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 74e853bb6948..9b89a91b6b47 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -25,6 +25,7 @@ #include <linux/mmc/slot-gpio.h> #include "core.h" +#include "crypto.h" #include "host.h" #include "slot-gpio.h" #include "pwrseq.h" diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c index 002426e3cf76..33e7e65b6dde 100644 --- a/drivers/mmc/core/queue.c +++ b/drivers/mmc/core/queue.c @@ -19,6 +19,7 @@ #include "block.h" #include "core.h" #include "card.h" +#include "crypto.h" #include "host.h" #define MMC_DMA_MAP_MERGE_SEGMENTS 512 @@ -407,6 +408,8 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) mutex_init(&mq->complete_lock); init_waitqueue_head(&mq->wait); + + mmc_crypto_setup_queue(mq->queue, host); } static inline bool mmc_merge_capable(struct mmc_host *host) diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 29aa50711626..ab19245e9945 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -162,6 +162,12 @@ struct mmc_request { bool cap_cmd_during_tfr; int tag; + +#ifdef CONFIG_MMC_CRYPTO + bool crypto_enabled; + int crypto_key_slot; + u32 data_unit_num; +#endif }; struct mmc_card; diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 8cf686d98a68..927ba7566617 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -15,6 +15,7 @@ #include <linux/mmc/card.h> #include <linux/mmc/pm.h> #include <linux/dma-direction.h> +#include <linux/keyslot-manager.h> struct mmc_ios { unsigned int clock; /* clock rate */ @@ -395,6 +396,11 @@ struct mmc_host { #define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */ #define MMC_CAP2_AVOID_3_3V (1 << 25) /* Host must negotiate down from 3.3V */ #define MMC_CAP2_MERGE_CAPABLE (1 << 26) /* Host can merge a segment over the segment size */ +#ifdef CONFIG_MMC_CRYPTO +#define MMC_CAP2_CRYPTO (1 << 27) /* Host supports inline encryption */ +#else +#define MMC_CAP2_CRYPTO 0 +#endif int fixed_drv_type; /* fixed driver type for non-removable media */ @@ -489,6 +495,11 @@ struct mmc_host { bool cqe_enabled; bool cqe_on; + /* Inline encryption support */ +#ifdef CONFIG_MMC_CRYPTO + struct blk_keyslot_manager ksm; +#endif + /* Host Software Queue support */ bool hsq_enabled; |